"Stop 0x000000A5 the BIOS of the system is not fully ACPI-compatible every time as the installation of a new windows 7 integral over Inspiron 15R N5110.
Hello
- Insert your Windows XP CD into the CD-ROM or DVD-ROM drive, and then restart your computer from the CD.Note Some computers may require you change basic input/output system (BIOS) settings before you can start the computer from a CD-ROM. For more information about changing the BIOS, see your computer documentation.
- When the "Welcome" screen appears, press R to start the Recovery Console.
- If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
- When you are prompted to do so, type the administrator password and press ENTER.Note By default, the administrator password is blank in Windows XP Home Edition.
- By default, Hiberfil.sys is usually located in the directory root (C:\). At the command prompt, type del hiberfil.sys and then press ENTER.
- Restart the computer.
That goto advance Select ATA to instead of AHCPI save the setting, and then try to restart your Windows 7
hope it will work. »
But he did not AHCPI, but I found AHCI and let ATA instead of AHCI, but no difference that happened.
Hello
Check the steps suggested by LoneWolf1983 from the link below and see if it helps.
Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.
Reference link provided below for more information:
BIOS: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions
Thank you very much
I checked this thread, and I found this solves the problem
I have changed the serial port in the BIOS for 2F8/IRQ3 and I have not had a blue screen since... fingers crossed, it's her!
But as you know that no matter what BIOS are different from others.
Thus, I have not found any serial port in the BIOS to be replaced by 2F8/IRQ3
NOTE: My problem is when you install a new version of Windows.
In addition, every time a new windows installation 7 and facing the Blue error screen, I started to Macrium Rescue CD and clicked "fix windows startup", and then when restart my windows, I was not facing the the Blue error screen. If windows starts successfully.
If the blue screen error was tied to the BIOS, the Refelct Macrium rescue CD wouldn't no matter what (not know this problem)
Tags: Windows
Similar Questions
-
"The BIOS in this system is not fully ACPI-compatible" Stop: 0X000000A5.
BSOD
My home computer is running running windows xp for about 6 years... everything was OK until yesterday when I tried to turn it on. First it started as it does if she didn't close properly and got stuck in the loop of reboot that I did what I read on the forum... tapping F8 key and disabled the auto restart and I got the BSOD.
It is said... the BIOS in this system is not fully ACPI-compatible... I do not understand the BIOS or ACPI
The error message says:
STOP: 0X000000A5 (0 X 00000011, 0 X 00000006, 0X00000000, 0X00000000)
He also tells me to go to a website of material for a BIOS updated... but I do not understand what to download.
Can someone please help?
Hello
I suggest you to refer to this link and check if it helps:
http://support.Microsoft.com/kb/831691
Check if that helps.
-
Hello!
I got the card mother gigabyte, phenom 1100t and 16 GB of memory.
Now, I have installed msi x99s sli krait, i7 - 5820 k, 32 memory.
And hoping that run it without reinstalling Windows.
PC started normally. MSI welcome screen first, then I see the logo of windows and the next screen time spent BSOD with message "bios in this system is not entirely consistent.
So I wonder if the reinstallation of the system to solve this problem? Or maybe anyone has the best idea?
Hello
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you are facing problems with your Windows 7 computer.
I suggest to refer to the article below and check if that helps.
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
Equium L10-300 - Bios is not fully ACPI-compatible
Hello
Can help with this problem?
It is said on a blue screen when I start my laptop: this Bios is not fully ACPI comliant. It was in windows xp.
Recently upgraded to windows 7 but hey ho always the same error.All the bios etc, usual default settings was eager Flash the BIOS to see if that can help, but cannot because the update of the BIOS is windows based program... grrrr cannot get into windows!
Hey Buddy,
You can start Windows in safe mode?
Enter the advanced Windows (key F8) boot menu, and then select Safe mode. Windows starts without driver and usually it should always work.Also have you tested it with the factory settings? Try to install Windows with all tools and pre-tested drivers recovery disk. This recovery image is pre-tested by Toshiba and everything should work if not it s serious malfunction of equipment.
-
Satellite Pro A30 with BIOS not fully ACPI compatible for VISTA
I would use my beloved sitting Pro A30 to dual boot with Windows XP Home edition and Vista but having bought a 80 gig HARD drive and would divide in 2 partitions, I have now WXP SP2 running on the first partition, but try to install vista on the second I get the message: "BIOS IS NOT FULLY ACPI COMPLIANT".
I ran the compatibility of vista online check and gave the OK and have the latest version of the bios v1.80. Do I have to buy a laptop?
Yes. Your laptop is not supported in Vista. Sorry but there is no chance of having Vista BIOS support.
-
Satellite Pro A10 stops during the installation of Windows
I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.
If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.
I suspect an overheating issue but would like advice.
Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.
However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
You know, it of always difficult to provide an exact solution without any diagnostic tests.For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
Guys could run tests and would situate the fault quickly. -
Windows XP Media Player is automatically putting the wrong info for my pieces for example the name of the album and the cover.
How can I stop all the automatic update of news media?
Windows XP, the version of Windows Media player to date. ' Retrieve additional information on the internet "is not checked.
"Rearrange music in rip music folder, using rip music settings" is not checked
"Keep my ratings stars as global ratings in files" is unchecked
"Maintaining the codecs automatically" is unchecked.
Under Privacy Options, everything is disabled except "set clock on devices automatically.
Thank you for your help in this endevor.
Hello
1 how long have you been faced with this problem?
2. don't you make changes on the computer before this problem?
3. what version of windows media player do you use?Try the fix tool in the following article and verify.
Solve the problems of Windows Media Player video and other media or library
http://support.Microsoft.com/mats/windows_media_player_diagnostic/See also:
Resources for the resolution of problems in Windows Media Player
http://support.Microsoft.com/kb/843509 -
I have two printers. One of them: hp Laserjet P1505n just stop printing. the other is fine. Windows 7. Please notify. Thank you.
I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.
You can also run the troubleshooting of the printer.
Open the printer Troubleshooter
Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.
For more information, visit the below mentioned link:
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx
Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT
You can see the below mentioned links.
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer
-
Hello
More frequently (almost daily now), my Inspiron 15R N5110 will freeze and, sometimes, to get a blue screen and shuts down completely. Windows 7 is up to date. BIOS not updated (5 years now, I think).
Should I update the BIOS to A11 (a final)?
Any concerns with Win-7?
Any concern with AVG (virus protection)?
No idea or your experience wil appreciated,.
Marcel
PCIMPOTS,
You can update the bios of the computer. You can consider the formatting and installing Windows 7 on the system. Do a new Installation of Windows will more than likely fix the problem.
-
Decided to reinstall Vista business after that my lenovo x 200 could not start. After you have reinstalled, had to restart and now it appears
"Windows is unable to complete the installation. To install Windows on this computer, restart the installation.How should I solve this problem?Hello
1. may I know the exact error you received during initialization failed prior to relocation?
2. do you know the exact reason for the failure of start?
I will be asked to get in touch with the manufacturer of the system on this issue.
Installation and reinstallation of Windows Vista, you can fallow the article below:
http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_3
-
Original title: Installation of Windows 7.
I tried to install Windows 7 (clean install from XP and reveived the following message is displayed:)
Windows didn't prepare the computer to start the next phase of the installation. to install Windows, restart the application.
I restarted my PC, anti anti-virus disabled (as advised) and still get the error message.
According to the Upgrade Advisor Windows 7 my PC is compatible.
Any ideas?
If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)Select the disk partition where you want to install Windows 7 click Next.
You will receive the following warning:
The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.
(At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK
The installation program will now begin installation. During installation, your computer will be restarted several times.
Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.
You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.
-
I can see only the servers in a 'new window' or 'full screen.
I have Windows Server 2.0 on can I Server 2008, and I can only see the servers in a 'new window' or 'full screen '. I want to select the server and have it open right in Internet Explorer without having to open a new window for each server (see screenshot). "When I select in the Console tab it tells me to ' click anywhere to open.
I tried the things:
-J' tried to unstall and reinstall and it works.
-install and I tried browser Fire Fox.
-tried the two port 8333 and 8222.
Any ideas?
Y at - it customer management console / I can install that does not use a browser?
Host server Win 2008 without Hyper-V server.
Address IP/name, enter 127.0.0.1:8333
Enter your credentials in the user/pass fields.
BTW. Check this - how to install 32 bit VIC on 64 bit system.
J.
---
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
When I click on the + to open a new window I don't like the images that arise. I tried several times to change that through words: config; Browser.newtab.URL. I put in the site I want and it won't change. I tried to put in: blank and it don't work. I'm obviously something wrong - can you help please?
Thank you
If Firefox is ignorant preference browser.newtab.url, the usual culprit is an extension.
You can open the page in Firefox Add-ons using either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
- in the Windows "Run" dialog box, type or paste
firefox.exe "about:addons"
In the left column, click Extensions. Then, in case of doubt, disable (or delete, if possible) not recognized and unwanted extensions. Do not forget that all extensions are optional, none come with Firefox, and you can learn more about them by checking their reviews on the site of the Add - ons.
Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.
Any improvement?
-
The Firefox HELP tab keeps appearing whenever I open the application or a new window. Firefox 3.6.28, Mac OS 10.4.11
Ah, apparently it's reading I wanted as long as home pages; When I reset my homepage it started working right.
Thank you
-
With the Firefox 4 RC, the 'open in a new tab' and the 'open in a new window' - buttons have changed places. This is quite annoying because I normally do without looking, but now it always opens in a new window instead of a new tab. Is it possible to restore it? Perhaps in your own settings?
You can use the menu editor extension to reorganize menu items - https://addons.mozilla.org/firefox/addon/menu-editor
Maybe you are looking for
-
Tecra M10 cannot install OS using disc SSD Kingston
Hi all. I am a computer tech and can usually find a way to fix something myself, (rock Google!). But recently I had a Kingston SSDNOW 64 GB drive and decided to install in my Tecra M10 age of 12 months. 4 weeks ago I had a full head of hair, now I am
-
Bus driver SM for equium a60-692
Hello I reformatted my hard drive and reinstalled windows xp professional, but miss me the SM Bus driver. Is it possible that you could tell me where I can get one please. I tried looking on the net and check the updates of windows, but nothing may b
-
User.Profile.cannot.Locate.and.All.photos.Music.Work.and.Data.Vanished
-
Lost page calendar both sidebar & gadgets. How to restore?
Calendar was in the sidebar, but disappeared (from gadget page too)
-
Windows Media Center showing does not in all programs
On my gateway LX6200-01 under Vista Home Premium, Windows Media Center option no longer appears in the list of all programs. The button on the face of the Tower also unbootable WMC. However, WMC can be started by inserting a DVD and choosing once t