STOP: 0x000000D1 ndis.sys error during the Windows Xp Setup screen

I have a computer tailor-made with a motherboard Intel D865GLC with a p4 running at 2.5 Ghz, a western digital 200 GB HARD drive, a drive Liteon DVD - RW, this computer was recently given too me by a friend because I can not afford the newer hardware. The problem I have is when I do a clean install of windows xp, I randomly get a STOP: 0x000000D1 ndis.sys blue screen. I tried to install an upgrade of windows 98 and windows 2000, nor worked. There is no specific time that he likes to fail, but no matter what it fails, it can be just by copying the files from its installation, the network while it please help

Thanks in advance

Nate

Do not install an operating system is usually caused by (in order of probability):

1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

* It is not necessary to have a third party burning software in Windows 7 since Win7 natively allows to burn an .iso. Other operating systems require it. A good free choice ImgBurn comes from www.imgburn.com .

5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with a third-party burning software (unless you have Windows 7, that allows to record the .isos natively) - as an image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

Tags: Windows

Similar Questions

  • I get this error during the windows WindowsUpdate_8024A000 updates

    I get this error while the vista sp2 update is there any solution for this? WindowsUpdate_8024A000

    Hello
    The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

    I would like for you to perform general troubleshooting steps for Windows Update.
    Method 1: Try to run the fix - it of the article mentioned below, if you not him have not yet tried.
    The problem with Microsoft Windows Update is not working:
    http://support.Microsoft.com/mats/windows_update/
    Method 2: Scan run SFC. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.
    Scan sfc enforcement procedure:
    a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
    b. click on continue or provide administrator credentials if prompted.
    c. in the type in the following command prompt window and press ENTER:
    sfc/scannow
    Refer to this article for more information:
    http://support.Microsoft.com/kb/929833
    Method 3: Check the hard disk for errors:
    See: http://windows.microsoft.com/en-US/windows-vista/Check-your-hard-disk-for-errors
    Note: Check hard drive for errors will check the bad sectors on the hard drive and repairs. During this process, there is a chance of losing the data in these sectors. Please back up the data before performing this step.
    I hope this helps.
  • my notebook nc6400 is suspended during the windows XP splash screen. If I try in safe mode, it hangs

    Also, I tried to repair the operating system using the XP disk however it crashes at the start to the top of the disc.

    There are a few diagnostic tools on a CD that I can download to find out what particular hardware component is the problem?

    Thank you

    Hello

    I propose to replace the hard drive first and see if this solves the problem - it is difficult to say if there is no problem with memory as the laptop may have turned off during the test memory because of the hard failure.

    Kind regards

    DP - K

  • STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

    My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

    I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

    Error during the extraction process. Details of error: path not found

    I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

    You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

    Please provide additional information on your system:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a CD/DVD drive work?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

    If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

    You also will not start in any kind of Mode safe no more.

    Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

    Windows file protection could not initiate a scan of protected system files.

    The specific error code is 0x000006ba [the RPC server is unavailable.].

    Failed to start the RPC mode server safe either.

    I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

    There should be a backup copy of rpcrt4.dll already on your system, here or here:

    c:\Windows\System32\dllcache

    c:\windows\ServicePackFiles\i386

    You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

    There should be a backup copy of rpcrt4.dll already on your system, here or here:

    c:\Windows\System32\dllcache

    c:\windows\ServicePackFiles\i386

    When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

    Do you have a Hiren BootCD you can download here:

    http://www.hirensbootcd.NET/

    On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

    Direct HTTP mirror + Torrent, Torrent Magnet

    Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

    The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

    Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

    File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

    If you need a simple and CD burning, this is a free software popular software:

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your new bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

    These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

    Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

    There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • recovered to previous windows because of an error during the installation of an upgrade of windows 10 now my windows 7 Ultimate edition is not enabled

    before installing an upgrade to windows 7 ultimate windows 10. my version of windows has been activated and genuine. but due to an error when installing windows 10, blue screen appeared and my pc was recovered back to the previous version which is windows 7 ultimate but now its true this is not enabled and im nt able to upgrade to windows 10 as well...
    in the system properties it says 3 days to go to automatic activation I waited for 3 daysbut it said another 26 days to automatic activation.
    What does that mean?
    How can I solve this problem?

    To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool

    (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

    Once saved, run the tool.

    Click on the button continue, which will produce the report.

    To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.x

    -in your own thread, please

    Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!

    http://www.Microsoft.com/en-us/howtotell/hardware.aspx

  • Satellite P305D - different error during the startup sequence

    Hi I have a constant problem I have no idea how fix it. I have Windows Vista Home premium loaded and it works very well when it is running. I can restart the laptop several times and it starts perfectly, if I turn it off for an hour or two and go to start it always happens with a different error during the startup sequence. Most of the time I just go to start Windows normally and it loads, other times I have to go to the ERD.

    I uninstalled Vista and wipe the system well before reloading (using another drive) and the same thing happens. Would it be more likely to be hardware related? I know the battery charges well and I ran all the tools that Vista has to check the hard drive, so I don't know where to go next.

    Any help would be appreciated.

    Terry

    Hello

    Can you please post what errors you get during the boot process?

    In my opinion it could be a hardware problem, because you have already tried to reinstall Vista, so I doubt that the error is software related.
    Strange, but it might be a problem of RAM or HARD disk. The two parties, you can test it with Memtest86 and Drive Fitness Test. Google is your friend to find these two tools.

    In the worst cases, you must go to an authorized service provider. Technicians can check the entire notebook.

  • Try installing SAGE simply accounting error: "Error 1935. An our error during the installation of Assembly component

    Try to install simple SAGE accounting and the following error:

    "Error 1935. An our error during the installation of the Assembly {97F81AF1-0E47-DC99-A01F-C8B39A1E1873} HRESULT 0X80071A91 component. »

    After this error, I also receive this error:

    "Error: 1603 Fatal error during installation." Consult the help of Windows Installer (MSi.chm) or MSDN for more information.

    Anyone out there has any help with these errors?

    TKS!

    Hello

    1. are you able to install other programs?

    2. How are you trying to install?

     

    I suggest to follow the steps provided and check if it helps.

    Method 1:

    Problems installing and uninstalling programs on Windows computers: http://support.microsoft.com/kb/2438651

    Method 2: You can also configure your computer in a clean boot state, and then try to install it.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

     

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Hope this information is useful.

  • Error during the full backup of the system Vista "Media is not UDF.

    Original title: error during the full backup of the system Vista "Media is not UDF" I tried CD - R and DVD + R

    I just finished day three re - build with all the latest updates and now I want an IMAGE backup to recover from.  When I run Backup asked that media... suggest a label for the DVD but I get the error 'Media is not UDF' end there...

    Also if I back up to another hard drive on my system can recover from this Image?

    Thank you!

    Ken D

    Hello

    backup on an external hard drive or DVD

    the 1st link below is how do the backup of the complete computer for the company, ultimate and vista business

    http://www.bleepingcomputer.com/tutorials/tutorial145.html

    and that is how do to recover the backup complete pc

    http://www.bleepingcomputer.com/tutorials/tutorial144.html

    and here is the information of microsoft in restoring a system image backup

    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

    If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

    http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  • 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation

    When you try to upgrade Windows 7 SP1 to Windows 10 ' 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation "is a problem recurring and none of the solutions posted for a Samsung RV511 work.

    When will there be a solution of Microsoft?

    Concerning

    Hello

    Since Windows 10 is a completely new operating system, the computer manufacturer might still not have designed and developed drivers for it. As suggested waiting for the manufacturer to release the necessary drivers for the hardware and then try the upgrade.

  • 0xc007001d error during the installation of antivirus software

    0xc007001d error during the installation of antivirus software. AVG is the brand name. Installation stops with error code.

    Help!?

    I suggest that you uninstall and redownload it or switch to another brand or use the built in Microsoft Security Essentials. AVG has a bad reputation for bugginess, false positives.

  • video files preview 'this file cannot be previewed because of an error in the windows media player manager rich low."

    I used to be able to watch VIDEO (including the .avi) files in the preview pane in windows Explorer, but it has since stopped working. This change took place after the update to the latest version on windows media player. (version 12.0.7601.18150)

    attempted fixes:
    1. in options from files of the variations of tab - all reviews of checking / unchecking "always show icons, never thumbnails" and "show previewhandlers in the preview pane. the first has nothing to do with this problem. However, the 'show previewhandlers... '. "when checked this error message is displayed in the preview pane" "this file cannot be previewed because of an error in the windows media player rich preview Manager." When unchecked the poster preview pane a thumbnail with the icon of the program it is supposed to open, in the present case, WMP, this correction allows the preview of the PHOTO but NOT of VIDEO. " also I reset by default, of course.
    2. they also examined the options under system settings panel-advanced control and troubleshooting without success.

    all the less someone ' one can confirm that there is a problem with windows media player? or it comes from windows Explorer?

    UPDATE:

    I found this temp. The difficulty of the problem:
    https://www.YouTube.com/watch?v=xBgrJ3XO-Z8

    This shows that the problem is with WMPRPH.exe (Windows Media Player Rich Preview Handler) it happens when wmprph farm, now if someone knows how to impose this program to continue to work as it should which would solve my problem.

  • Get the error during the copy of installation section

    When you install JDeveloper (jdev_suite_121300_win64.exe) on my Windows 7 with JDK 1.7.0_70 I get the following errors during the copy of the installation:

    • oracle.sysman.oii.oiif.oiifb.OiifbEndIterateException: java.io.IOException: java.io.IOException: com.oracle.cie.common.util.crlf.CRLFException: failure to transform C:\Oracle\Middleware\Oracle_Home\oui\bin\deinstall.sh to C:\Oracle\Middleware\Oracle_Home\oui\bin\deinstall.sh. Could not rename the temporary file: C:\Oracle\Middleware\Oracle_Home\oui\bin\fixcrlf3284256669950451090
    • oracle.sysman.oii.oiif.oiifb.OiifbEndIterateException: java.io.IOException: java.io.IOException: com.oracle.cie.common.util.crlf.CRLFException: failure to transform C:\Oracle\Middleware\Oracle_Home\oui\bin\deinstall.sh to C:\Oracle\Middleware\Oracle_Home\oui\bin\deinstall.sh. Could not rename the temporary file: C:\Oracle\Middleware\Oracle_Home\oui\bin\fixcrlf3284256669950451090

    I'm on the administrator account.

    No idea why I get this error and how to fix it?

    Thank you...

    Please visit to solve the problem.

    http://rohanwalia.blogspot.SG/2015/06/unable-to-install-jdev-couldn ' t - rename.html

    Disable your antivirus and try to install.

    Thank you

  • The system has encountered an error during the interview of the application. If the error persists, contact the system administrator

    Hi all

    We cloned an Oracle EBS R12.2.2 instance and it worked very well for us. To increase the RAM of the newly created virtual computer, we did the virtual machine down. Once the RAM has increased, we started all the services (without error), including level of DB and Application layer. But when we try to access the application of EBS get the following error:

    -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    The system has encountered an error during the interview of the application. If the error persists, contact the system administrator.

    -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


    Then I checked all the services, they are running.


    Log file: / u01/applmgr/SCREWS/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log

    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    Process of shell VIS_0402@VIS Manager internal simultaneous departure - ID 6095

    logfile=/U01/applmgr/vis/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log/VIS_0402.Mgr

    PRINTER = noprint

    mailto = applmgr

    Restart = N

    diag = N

    sleep = 30

    PMON = 4

    quesiz = 1

    Reviver is ENABLED

    CP-SYSTEM ADMIN RESP. internal MISSINGThe competitor Manager encountered an error.

    Check the simultaneous log manager for more information. : APRIL 2, 2014 14:21:59 -

    Shut down the internal concurrent Manager: April 2, 2014 14:21:59

    List of errors encountered:

    .............................................................................

    _ 1 _

    Systematic AFPCSQ can't nec USER_ID value of the profile option. ORACLE

    error 1403 in get_responsibility_data

    Cause: get_responsibility_data

    has failed because of the ORA-01403: no data found.

    The SQL statement being executed at the time of the error was: and

    a exe

    .............................................................................

    APP-FND-01388: cannot read the value for option profile SQL_TRACE in routine and ROUTINE.

    List of errors encountered:

    .............................................................................

    _ 1 _

    Routine AFPCAL has received the code of failure while running or analysis of your

    simultaneous program CPMGR

    Examine your log file of concurrent application for more information.

    Make sure that you pass arguments in the correct format.

    .............................................................................

    The internal concurrent Manager VIS_0402@VIS ended with the State 1 - abandon.

    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    Note: Before you restart the virtual machine it worked great. It has not changed anything except the RAM to the virtual machine. After the start, we get error.

    I need your help. Please suggest me.

    Thank you

    Prabhakar

    Hi all

    Thank you for your support. I solved the problem. Find the info below.

    ===================================================================================================

    Question: Like I said existing VM is cloned VM. Then after we had changed the host name. I checked the database alert log file:

    Before the reboot: name of the node was the previous still node name VM that it functioned very well. (for ex: xyz.domain)

    After the reboot: name of the node is replaced by the new host name. (for ex: abc.domain)

    Once the name of the node is changed he started creating problem in starting the application services.

    One last thing, I want to mention here after hostname change, approval of new contextfile has 700, but it should be 755.

    Solution: I followed these steps.

    (1) stop all services on the LAYERS of the DB and APP

    (2) change the new contextfile permission if not 755 and the .env at the level of the source DB

    (3) cd $ORACLE_HOME/appsutil/bin and run as: perl adgentns.pl appspass = apps contextfile = $CONTEXT_FILE - removeserver

    (4) change the name from old host to the new host name, so find in contextfile.

    (5) start listener, then the database

    (6) listener status, it must must give service to the db instance

    (7) perform autoconfig with new contextfile (DB Tier)

    (8) perform autoconfig (pane APP)

    (9) start all services

    ======================================================================================================

    It works for me, and now the application is running. I hope that it will also work for others.

    Thank you

    Prabhakar

  • Get the error during the execution of the IOM in script integrated purge OIM_ReconArch.sh

    Get the error during the execution of the IOM in script integrated purge OIM_ReconArch.sh


    bash-3. $00 cat Err_Arch_Recon_2012_11_01_15_36_06.log
    ****
    -The execution state of archives reconciliation
    ****
    BEGIN OIM_SP_ReconArchival ("n", "n", 200000, 'ARCHIVE_SELECT_WITH_CONS_DROP_REC', 'both, '20110101',' 20111231'); END;

    *
    ERROR on line 1:
    ORA-00942: table or view does not exist
    ORA-06512: at "PREPRD. OIM_SP_RECONARCHIVAL', line 722
    ORA-00942: table or view does not exist
    ORA-01031: insufficient privileges
    ORA-06512: at line 1


    Help, please

    ORA-06512: at "PREPRD. OIM_SP_RECONARCHIVAL', line 722
    ORA-00942: table or view does not exist
    ORA-01031: insufficient privileges

    (1) check if the OIM_SP_RECONARCHIVAL table or the view exists or not...
    (2) if it exists, check if the DEV_OIM user has enough privilege to view this table...
    Otherwise, give it all privileges to open as a sys as sysdba

    GRANT ALL PRIVILEGES ON DEV_OIM;

    COMMIT;

  • Get the error during the installation of the regional coordination unit

    Hello
    I am facing the error during the installation of the RCU below. We gave the user sys and the DDT that works very well DOSPROMPT.the even when I give the configuration during the installation of the remote, I get the below error. Can someone help me with this problem.
    Thanks in advance...

    2012-10-02 22:52:58.645 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: SYSDBA, connectString: (description = (address = (host = localhost)(protocol=tcp) (port = 1521)) (connect_data = (service_name = ORCL) (server = dedicated)))
    2012-10-02 22:52:58.730 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: unable to connect to database: name of user and password invalid.
    Please enter the name of user and password valid
    2012-10-02 22:52:58.730 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:
    oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: name of user and password invalid.
    Please enter the name of user and password valid
    at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)
    at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)
    at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)
    at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1352)
    at oracle.sysman.assistants.rcu.ui.pages.DBConnectionPage.updateModel(DBConnectionPage.java:552)
    at oracle.sysman.assistants.common.wizard.WizardPageExt.wizardValidatePage(WizardPageExt.java:166)
    at oracle.bali.ewt.wizard.WizardPage.processWizardValidateEvent(WizardPage.java:710)
    at oracle.bali.ewt.wizard.WizardPage.validatePage(WizardPage.java:680)
    at oracle.bali.ewt.wizard.BaseWizard.validateSelectedPage(BaseWizard.java:2367)
    at oracle.bali.ewt.wizard.BaseWizard._validatePage(BaseWizard.java:3072)
    at oracle.bali.ewt.wizard.BaseWizard.doNext(BaseWizard.java:2152)
    at oracle.bali.ewt.wizard.dWizard.DWizard.doNext(DWizard.java:405)
    at oracle.sysman.assistants.common.wizard.WizardExt.doNext(WizardExt.java:261)
    to oracle.bali.ewt.wizard.BaseWizard$ Action$ 1.run(BaseWizard.java:3944)
    at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
    at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:641)
    to java.awt.EventQueue.access$ 000 (EventQueue.java:84)
    in java.awt.EventQueue$ 1.run(EventQueue.java:602)
    in java.awt.EventQueue$ 1.run(EventQueue.java:600)
    at java.security.AccessController.doPrivileged (Native Method)
    in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:611)
    at oracle.sysman.assistants.common.util.EventPopUp.dispatchEvent(EventPopUp.java:94)
    at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
    at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

    3rd error is known, one can ignore it.

    Try it with the user of the system, I thought I told you that.
    This should work.

    Score pls help if

Maybe you are looking for

  • X 220-problem of server terminal server / 3 G / VPN

    Hi all I have two X 220 with identical problems. The procedure to connect to our server terminal server (Windows 7, server = v2008) is: -connect to the internet -connect to the VPN (using the Version of Cisco VPN Client 5.0.07.0290) -connect to the s

  • Default configuration for a step tab

    We have a system that has been installed at a couple of sites affiliated to the Japan and in Romania (we have developed in Australia).  It works on TestStand 4.2 with code written in LabVIEW 8.6 (although the Romanian site uses TS4.2.1 and LV2010). 

  • connection iPhone WRT54G problem

    I have an iPhone 3GS that I am trying to connect to my home network but have a problem. My router is a WRT54G that is set up with WPA2 Personal.  I have connected a laptop computer and two TiVo for this network using the key I have the Setup on the r

  • DVD ROOM does not work

    I can't burn DVDs and CDs, but it reads the cd or dvd. When troubleshooting I can it see an error that the driver for the IDE of AR1IYGZ7 controller is not installed. so please help me my operating system is windows 7-32 bit "HP Pavilion p6140in desk

  • Cancelled CLOCK - permanently removed from the list of gadget and Desktop-Win 7 - How to recover?

    I took the clock in the GADGET list in office, then one way or another (erroneously, I wanted to remove a second copy on the desktop) it took off (answer YES to a question cancelled) desktop computer and Gadget list. Apparently it seems now that the