Stop: 0x000000d1 the problem seems to be caused by the following file: ntoskrnl.exe DRIVER_IRQL_NOT_LESS_OR_EQUAL

Similar Questions

• I downloaded a creative pack but stops installing the .msi file, no error message.

  Hello.

  I downloaded a creative pack but stops installing the .msi file, no error message.

  Thank you

  to install the creative cloud desktop application, use the file here, download Adobe Creative Cloud apps | CC free trial Adobe

  [moved from the download, installation, commissioning creative cloud download &install]

• Problems starting Windows XP. I get "the following file is missing or damaged. \WINDOWS\SYSTEM32\CONFIG\SYSTEM"message.

  Original title: start windows xp questions

  Windows xp. When I try to start the system I get the message "the following file is missing or damaged. \WINDOWS\SYSTEM32\CONFIG\SYSTEM... I have an xp disk and code but not sure if it is the origanal. When I start the computer, it does not start the windows xp disc.

  If you get the message hal.dll missing, your system is still booting from the hard drive and do not boot from the XP Recovery Console CD (I hope that you have created).

  There is no hal.dll on the CD you made if all goes well.

  You must enter the BIOS of your system and make the first boot from the CD to your Pcakard device Bell looks like it firstly, instead to focus first on the HARD drive (make the drive the second choice for now).

  Searching the Internet, I found a message that says to enter the Packard Bell BIOS you must do this:

  Users of Packard Bell, you can access the BIOS set up by pressing the keys F1, F2 or del

  I don't have a PB, so I can't say for sure if that works, or what to do after that - you will need to look around the BIOS for things like the boot order boot priority, etc. and make the CD drive the first choice, second choice HARD drive, save the settings, then you can boot from the CD I hope that you have made using these instructions.

  Generally when the system detects a CD is inserted, it will sell you a message like this:

  Press any key to boot from CD...

  Then all the button and follow the rest of the instructions...

• On startup, I get the following error: spoolsv.exe - Application error

  On startup, I get the following error:
  Spoolsv.exe - Application error
  The instruction at "0 x 10002837" referenced memory at "0x00000000".  The memory could not be "written".

  Then the print subsystem stops.  Windows update service keeps control and verification.  I let go 20 hours and it is never resolved.  I can't open some applications requiring printers.  Help please.

  Bill

  Hello DragonBill,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL.  These files are created by the spooler to save data delayed a print job.  The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.

  To try to correct the application spoolsv.exe error, you must remove these files from the system.  To do this, perform the following steps on your Windows Vista computer:

  1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .

  2. in the Services management console, find the Spooler service, right-click on it and select stop.

  3. then open the folder C:\Windows\System32\Spool\Printers .  (Here, we assume that your Windows is installed in the default C:\Windows folder)

  4. delete all the . SHD and SPL files in this folder.

  5. then open the TMP folder and delete all the old, unused files in this folder.

  6. Finally, restart the spooler from the Services management console service.

  Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files.  To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.

  If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer.  A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option.  On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next.  In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next.  Finally, check and then click Next again to confirm your restore point and restore of the system.  Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.

  It is important that you know that application errors can also occur because of virus or spyware infections.  In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker.  Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

  The file is missing or corrupt is one of your files in the system registry.

  By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
  Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
  Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

  Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
  Register-> Registry Restore Wizard.
  then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

  When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
  "How to restore Windows XP to a previous state"
     <>http://support.Microsoft.com/kb/306084 >

  Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

  "How do I recover from a corrupted registry that prevents Windows XP boot"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• Impossibile to "start Windows because the following file is missing or damaged. Windows system32 config system

  1. Impossibile to "start Windows because the following file is missing or damaged. Windows system32 config system

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes pulling and buttons power).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to start try to copy files to a hard drive with a corrupted file system so corruption of file system must be fixed first using the XP chkdsk program and run chkdsk can solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable CD from the Console of the Recovery XP (no XP media required).

  A CD of XP Recovery Console is not the same as the recovery disks that may have come to a store to purchase the system.

  If you have any bootable CD to run the XP Recovery Console or that you are not sure what type of bootable CD you have, can create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  If you need instructions to create a bootable XP Recovery CD of Console, we can predict that too (just ask).

  After booting into the Recovery Console, you should be in this folder:

  C:\WINDOWS

  For each of your hard disk partitions, you must then run:

  Chkdsk /r

  For example, at the Recovery Console prompt, enter:

  CHKDSK c: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  The chkdsk/r must be completed without error, you may need to run several times until it does.

  Remove the CD, and then type "exit" to exit the Recovery Console and restart the computer and the report with your progress.

• Windows didn't start because the following file is missing or corrupt: &#60; root windows &#62; \System32|hal.dll, please reinstall a copy of the above file.

   \systrem32\hal.dll

  What can I do with this message:

  Windows didn't start because the following file is missing or corrupt: \System32|hal.dll, please reinstall a copy of the above file.

  Thank you

  In Windows XP:

  http://pcsupport.about.com/od/findbyerrormessage/a/missinghaldll.htm

  In Windows Vista & 7:

  http://pcsupport.about.com/od/errorh/a/HAL-dll-missing-Windows-7-Vista.htm

  In addition, if the file is actually missing, you can try to boot from a UNIX / Linux Live CD like Knoppix and add/replace the file manually with a file from another PC running THE SAME VERSION OF WINDOWS!

  If you are not good with computers, you should ignore this option because it could cause serious problems. If you still want to try, and there is a hal.dll file in \system32\ BACK IT UP. You have to put back in place.

  Let us know if it works.

• Error message: Windows has not start because the following file is missing or damaged

  This error sometimes occurs when starting upwards from my Win XP computer:
  Windows could not start because the following file is missing or damaged. Windows root\system32\hal.dll. Please reinstall a copy of the above file.
  the computer then complete the beginning upward and operate normally.

  How can I stop this error message?

  Kind regards

  Hello

  ·         Since when are you facing this problem?

  ·         Remember to make changes to the system?

   

  I suggest to disable the startup items when the system starts up and then check if the problem is resolved.

  How to disable programs that run when you start Windows XP Home Edition or Windows Vista

  http://support.Microsoft.com/kb/270035

  I suggest following the steps mentioned in the article below and check if

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• Windows didn't start because the following file is missing or corrupt__ &#60; root Windows &#62; \system32\hal.dll__please reinstall

  Just the pc does not start. It goes to safe mode, safe mode with network screen etc. and whatever i try nothing happens just of gets stuck and freezes.

  At this point, I tried f8 and tried debugging mode or somat and got this message

  Windows didn't start because the following file is missing or damaged

  \System32\hal.dll

  Please reinstall

  Then, I put my windows xp disk in to access the repair console and get this message

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  STOP: 0X000000D1 (0X7F1C6080, 0X00000002, 0X00000000, 0X7F1C6080)

  before he gets to the screen of choice.

  Any ideas anyone?

  Looks like you have hardware failure. Start your troubleshooting by testing the material.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• Models of DW: 'this document uses the following files not in this site.

  I recently started using DW templates in CS6. It was a bit frustrating at first, but seems well wouth it. I've created quite a few pages in the folder root of hares and have no problems there. However, I created a new folder to a different section of my site (mysite.com/new_folder/new_page.htm), and then went to save a new page of the model and got the message "this document uses the following files not in this site. Its the same site, just a new folder which is placed at the root.  When I save the page in the new folder there to make a copy of duplicant images, css scripts and place them in the new folder to work? Must be a way to do it and have DW know where to find the original files surely?

  Thank you

  I downloaded a test page... It turns out that the 'message' was just misleading and all the Info page has correct links. Everything is good

• Setup error "the system cannot find the specified file" (hpzprl40.exe)

  Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops.  Help, please.

  Hi loveisus,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

• Creating recovery discs - "unable to open the following file" error "

  Hello all,.

  I'm trying to create a set of recovery disc for a customer * Satellite L300 - PSLB8A-07U004 *.

  While the application opens and begins the creation of the disk set, there, three times now, failed to with the error message of * 'cannot open the following file. D:\ ! "V5_01_07.VRP (error Code: 020123-F1-00000000). *

  I tried the first time in this process while all customer data were always loaded.
  I have now done a "restoration"out of box experience"because I thought that one of these files may be the cause, but, alas, the mistake was repeated."
  Of course, it's irritating (to say the least).

  I did NOT any changes to the layout or resizing of partitions. »

  Any thoughts?

  rampant_rhino

  Stand by. If I understand you well you CAN restore the operating system using F8, but you CAN create DVDs using "Toshiba Recovery Disc Creator' of recovery.

  Am I right about that?

• Failed to create the recovery disk - error: differences between the following files

  Hello, I am using the recovery disc option, but during the creation of the third disc, I get this error repeatedly (I tried to create 4 + times now, using the same type of discs that worked well with the first 2 discs). The full error message is:

  "differences between the following files. "Source path: path:F\ZZImg\09753XSP2.swm E\HDDrecovery\SWImg\0975XSP2.swm target (error code: 02016F-3 c-00000000)"

  How to solve this? I want to reformat my laptop, and the thought that it would be better to create these discs first. It is recommended to have the front discs I try to reformat? This error would prevent me to use the option 'restore factory settings' which is present by pressing the 0 key during the loading screen?

  (I'm not very technically capable, so I am greatly worried something bad).

  Any help would be greatly appreciated.

  Thank you.

  Have you tried using different disks from different manufacturers?
  To do this. I had similar problem and it was not entirely compatible disc-related.
  I use TDK R CD or DVD. They work great!

• "When restarting, get the error, Windows could not start because the following file is missing or corrupt: &#60; root Windows &#62; \system32\ntoskrnl.exe.

  Original title: black screen

  Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

  There is a good chance that the disk check running the Recovery Console will solve the problem.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

  If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console

• Windows didn't start because the following file is missing/windows/system32/config/system Windows XP

  Original title: repair/restore of windows?, a little confused?

  My brother has problems with his computer. It happens that windows didn't start because the following file is missing/windows/system32/config/system. I need to know how to do this, but for some time.

  On the sites, some say not to use get it back? (is that right?) Here's what they say. He has not brought his xp disk, I tried an iso online but lacks the EULA. I have a windows xp update here somewhere, thatt allow me to fix his system?
  I basically have to hit enter then press R? Thank you

  1. Press Enter to start the configuration of Windows.

     do not choose "to repair an installation of Windows XP using the Recovery Console, press on R", (do not want to load the Recovery Console). I repeat, do not choose "to repair an installation of Windows XP using the Recovery Console, press on R.

  2. Accept the license agreement and Windows will search for existing installations of Windows.
  3. Select the XP installation you want to repair in the list, press Rto start the repair. If the repair is not one of the options, END of installation

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756