Stop: 0x0000C1F5

Similar Questions

• How can I fix a STOP: 0x0000C1F5 error?

  How can I fix a STOP: 0x0000C1F5 error on my PC when whenever I start the computer I get the blue screen stop error, even if I load the program in Windows Vista Business disk?

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:

  Try to start the computer in safe mode and check if you can start:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try to perform the verification and startup repair if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• Could not start after installation of Service Pack 1 - stop: 0x0000c1F5

  original title: stop: 0x0000c1F5

  my computer does not start after you install the service pak1 on my computer toshiba laptop, don't get into safe mode either I get an error message! 0xc01a001d! 3733/91430(\Registry\Machine\Componets\Derived Data...) and also the error code Stop:! 0x0000c1F5

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".

  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer

  http://support.Microsoft.com/kb/970101

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• COMPUTER LOCKED > error STOP: 0x0000C1F5 (0x00000000, 0x00000000, 0x00000000, 0x00000000)

  I have an Emachine W5233 with vista. I downloaded the service pack and I tried to restart my computer and it went to a blue screen. Windows has shut down to avoid than my computer. It is locked. Can I go to fix or normal windows startup and it goes back to the blue screen.

  Vista SP1, I guess? It offered by Windows Update or you are trying to install so manually?

  See...

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get the error stop: 0x0000c1f5. Found a fix from Microsoft, but can't use it because the laptop does not start.

  Windows Vista Basic
  Computer laptop bluescreens on startup with the code 0x0000c1f5.
  Laptop does not completely start using installation CD.
  Downloaded a patch to fix this problem, but can use it because the computer will not start.

  How your question about Windows Update? SP1 or SP2 is installed? Is the computer still under warranty or Service contract?

  See the workarounds here: http://support.microsoft.com/kb/946084 ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Blue Screen of Death - message of STOP ERROR 0x0000C1F5

  Hello

  I had problems with my laptop. I can't have in windows, and I'm still stuck on the blue screen.

  What I tried to do:

  -Google various techniques of dealing with the blue screen. Which most mentions by pressing F8 to enter safe mode, it which didn't work.

  -Tried to use the (future shop) recovery disk that came with the laptop, which has also not helped me.

  This technical information:

  STOP: 0X0000C1F5 (0X00000000, 0X00000000, 0X00000000)

  Any help would be appreciated.

  original title: Blue Screen of Death

  Hello

  This error is somehow a special case:

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
  http://support.Microsoft.com/kb/970101/en-us

  Stop error when you start a Windows Vista-based computer, even though hotfix 946084 is installed on
  computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/958069/en-us

  Other methods:

  Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
  http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

  Easier to read same message
  http://BSODs.com/content/Windows-Vista-and-stop-0x0000C1F5-Linux-anyone

  SystemRescueCd
  http://SysRescCd.org/Main_Page

  Video fix
  http://www.YouTube.com/watch?v=Y_OjCkbZyTw

  Video Fix - Linux
  http://www.YouTube.com/watch?v=SwSvIhyZRVc

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How do you get the beta version of windows 7 to solve the problem created when the auto update 0x0000c1f5 ran?

  How do you get the beta version of windows 7 to solve the problem of stop 0x0000c1f5 windows vista home edition created when the automatic update ran?

  Previous discussions about the error: ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Blue error screen: 0x0000c1f5

  When I was installing windows update for service pack 1, it does not settle and to restart, it's what happens every time

  1.) Windows error recovery screen
  Windows could not start. A recent change of goods or hard software could be the cause.
  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If food has been interrruptd during startup, choose start windows normally.
  Launch of the repair (recommended)
  Start windows normally.
  to choose the repair start or start windows normally appears a blue screen with the following details
  A problem has been detected and windows has shut down to prevent damage to your computer.
  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
  Check to make sure any new hardware or software is installed correctly. If it is a new installation, ask your hardware or software for any windows update, manufacturer you might need.
  I f problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as implementing caching or shading. If you need to use safe mode delete to disable components, restart your computer, press f8 to select advanced startup options, and select Safe mode.
  Technical information:
  Stop: 0x0000C1F5 (0x00000000, 0x00000000, 0x00000000, 0x00000000)
  I also tried to boot the system in safe mode. The system still does not work.

  Hello

  This, so you can see the bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that causes
  It crashing.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ==========================================================

  This error is somehow a special case:

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
  http://support.Microsoft.com/kb/970101/en-us

  Stop error when you start a Windows Vista same computer if the hotfix 946084
  is installed on the computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/958069/en-us

  Other methods:

  Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
  http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

  SystemRescueCd
  http://SysRescCd.org/Main_Page

  Video fix
  http://www.YouTube.com/watch?v=Y_OjCkbZyTw

  Video Fix - Linux
  http://www.YouTube.com/watch?v=SwSvIhyZRVc

  ================================================

  For the most part, the BlueScreens (the above is a special case as noted)

  Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• STOP error after a virus and system restore failure.

  I caught a virus, accidentally deleted a user account, then do a system restore; During this process the computer stopped working. When I try to start Windows, I get this error stop-STOP: 0x0000C1f5

  I tried all the possible solutions available on the web. I use Ubuntu and can access all my files, however, I need to run windows.

  Help, please!

  Hello

  We also receive the stop error message when you start in safe mode?

  If this isn't the case, we can try to boot minimum troubleshooting:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If so, then we do not have a Windows Vista disk or do we not have an option to boot from the recovery environment during startup?

  Let know us and we will move forward with this issue.

  Best regards

  Matthew_Ha

• 2 errors cannot start the file missing PSHED.dll and a blue screen error 0x0000C1F5

  Hello

  A few moments ago I had to do a restore of the system for some reason forgotten but restoring interrupted when the power off when I tried to restart it gave me a chioce of such boot options that start normally start SafeMode etc... but when I choose one of them it is said that the PSHED.dll file is missing or currput so I put in my drive repair/install and reboot, but after the white bar has loaded and the green bar loads, it gives me a blue screen error with the info tech being 0x0000C1F5 and the rest are zero

  I have a gateway with windows Home premium 32-bit model and more recent material I instaled a grapics card xfx 9800gt nvidia and a new mouse, any help would be appreciated thanks

  -Renton

  Hello

  This error is somehow a special case:

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
  http://support.Microsoft.com/kb/970101/en-us

  Stop error when you start a Windows Vista-based computer, even though hotfix 946084 is installed on
  computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/958069/en-us

  Other methods:

  Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
  http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

  Easier to read same message
  http://BSODs.com/content/Windows-Vista-and-stop-0x0000C1F5-Linux-anyone

  SystemRescueCd
  http://SysRescCd.org/Main_Page

  Video fix
  http://www.YouTube.com/watch?v=Y_OjCkbZyTw

  Video Fix - Linux
  http://www.YouTube.com/watch?v=SwSvIhyZRVc

  ================================================

  For the most part, the BlueScreens (the above is a special case as noted)

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• 0x0000C1F5

  How can I get rid of this blue screen?

  Hello

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
  http://support.Microsoft.com/kb/970101/en-us

  Stop error when you start a Windows Vista-based computer, even though hotfix 946084 is installed on
  computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/958069/en-us

  Other methods:

  Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
  http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

  Easier to read same message
  http://BSODs.com/content/Windows-Vista-and-stop-0x0000C1F5-Linux-anyone

  SystemRescueCd
  http://SysRescCd.org/Main_Page

  Video fix
  http://www.YouTube.com/watch?v=Y_OjCkbZyTw

  Video Fix - Linux
  http://www.YouTube.com/watch?v=SwSvIhyZRVc

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Computer hung over the Windows, restarted, update now it does not start even with the installation CD, Get blue screen with the stop message.

  Hi, I installed a Windows update when my computer froze, so I turned it off and back on, now I can't even boot to the installtion disk supplied with the computer. When I hit F8 reapeatedly and select one of the available options, the computer contiually restarts and will not even go into safe mode. I tried hitting ctrl-alt-del, which brings me just for the system configuration menu. I even tried a software that is supposed to start any computer with any problem, and I get the same results I get with the installation CD. (Blue screen with error message: STOP 0x0000c1F5 (0x00000000, four times).) I can't do anything with it, can you help me!

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly understand exactly what happened when you tried this update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• How to fix the PC after the left computer update with blue screen?

  System said it had to be downloaded an update for Windows Vista.  Did the download, restart the computer and only get the blue screen of death.  Restart the computer and you try to start safe mode do not work, the computer just restarts.

  Hello

  What is a blue screen C1F5 error? Windows 7? More often on Vista and I hope that the below
  will help both.

  This, so you can see the bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ==========================================================

  This error is somehow a special case: Windows 7 is similar to these.

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
  http://support.Microsoft.com/kb/970101/en-us

  Stop error when you start a Windows Vista-based computer, even though hotfix 946084 is installed on
  computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/958069/en-us

  Other methods:

  Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
  http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

  Easier to read same message
  http://BSODs.com/content/Windows-Vista-and-stop-0x0000C1F5-Linux-anyone

  SystemRescueCd
  http://SysRescCd.org/Main_Page

  Video fix
  http://www.YouTube.com/watch?v=Y_OjCkbZyTw

  Video Fix - Linux
  http://www.YouTube.com/watch?v=SwSvIhyZRVc

  ================================================

  For the most part, the BlueScreens (the above is a special case as noted)

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  Windows 7
  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  Vista
  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Computer froze during the installation of Vista SP1

  Attempmted install Vista SP1 after download and automatically restarts the computer froze. When I hard it boot it starts and then I get a blue screen that says a problem has been detected and Windows has shut down. Technical information reads "STOP: 0x0000c1f5 (0x00000000, 0x00000000, 0x00000000, oxoooooooo).»
  I tried to start in safe mode, but get the same blue screen and message.

  gmc1963,
  Here are a few articles dealing with this error code and the possible solutions for them.  Let us know if they are able to solve the problem or not.

  KB946084

  KB970101

  KB958069 Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen on startup.

  When I try to start my computer, it displays a blue screen, no matter what I boot (hard disk, safemode, Recovery Manager). It still crashes and I get this message:

  "A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error message. Restart your computer. If this screen appears again. Follow these steps:

  Check to make sure any new hardware or software is installed correctly. If this is a new installation ask your hardware manufacturer or software of windows updates you might need.

  If problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as the capture or the shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

  Technical information:

  "STOP: 0X0000C1F5 (0 X 00000000, 0 X 00000000, 0X00000000, 0X00000000).

  I was installing Windows service pack 2 and when it closes nd community has started up, that's what I got.

  Hi mot1on,
   
  Welcome to the Forum of answers Windows Vista.
   
  This problem can occur if the file $TxfLog of the file system is damaged. The Common Log File System (Clfs.sys) driver does not solve the $TxfLog file when the file is corrupted. In addition to the error message Stop Windows Vista does not start until the offending disk is removed or repaired.
   
  To solve this problem the damaged file must be repaired. It is possible to boot from a Setup disk that has the ability to self heal this type of problem. This can be done with a Windows 7 Beta installation disc. To restore a volume of Windows Vista with the Stop error 0x0000C1F5 without data loss, perform the following steps:

  1. get a Windows 7 Beta or the later Windows 7 installation disk.

  2. Insert the diskette in the floppy drive and boot from this drive to install Windows 7 Beta.

  Note: Once started, cancel the installation of Windows7. Do not install Windows 7.

  3. once the system has booted correctly, remove the installation of Windows 7 Beta disc and restart the computer from the hard disk.

  Note: The installation of Windows 7 Beta disc includes autocicatrisant, code that resets the RM $TxF log file corrupted, so the problematic volume should be recovered by simply booting from the Windows 7 Beta installation disc.
   
  You might also check out the link below:
   
  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
   
  http://support.Microsoft.com/kb/970101
   
  Hope this information is useful.
   
  Concerning
  Rehman - Microsoft Support