Stop at the first time (on the first picture)

Similar Questions

• When downloading to the sd card how can I stop downloading the same pictures?

  When you transfer the pictures from my card how can I stop downloading the same pictures again?

  You can delete old photos to the SD card in the device or the computer.  You can also choose the option to select only the images you want.

  Good luck.

• flat sequence stops after the first image

  Hello

  I use USB-6218 to drive a current source and read the voltage at the terminals of shunt resistance in my circuit. In order to safely run things, I wanted to make sure that when I stop my blood 'on demand' vi, I updated the current 0. To do this, I tried to use the sequence of dish (find in annex vi), but my program never leaves the first image, even after it hit the stop on my front button.

  Can someone help me with this?

  Thank you
  Katarina

  Does not change the value of Stop inside the Subvi and the loop runs continually.

  -Suggest to check this example: http://www.ni.com/example/28769/en/

• Why the rendering stops when exporting first 2014?

  I'm under first 2014 on Windows 7. I have a fairly simple sequence (without audio) that I'm trying to export in H264. Whenever I try it, the progress bar stops at the same point and it never ends.

  Any help is greatly appreciated!

  Open the preview in SOUL and the day before were it stops exactly in the export.

  This is the place that you need to fix in the timeline panel.

• State of the object stops at the first Image

  Hi, I have created objects for the Images 5 States and gave an automatic slide show, it plays well and stops at the first State, but I want to freeze in the State of the object.

  Is it possible to stop.

  Thank you

  Stanly

  Select stop to the last Image in the slideshow creator overlay.

  Important: Make sure you have latest update the viewer of content from the iTunes Store. It was approved in a couple of days.

  Bob

• bubbling events will stop at the first parent

  My application has a hierarchy of components custom; the application contains a part of the canvas, with a component tilelist with a custom itemrenderer. The itemrenderer contains an image, which, to the click, calls a function:
  (imgDelete.dispatchEvent (new Event ('removeItem', true));)
  I added a listener (this.addEventListener ('removeItem', removeItemHandler)); to the tilelist and which works perfectly. But the addition of the same event listener to the canvas or the application itself does not work. What should I do to get the event heard on any of the ancestors above rather than stop at the level of the parent container?
  Kind regards
  Paul

  Too bad!
  Just realized I didn't instantiates the event listener. More no coding after midnight.

  Pei

• Satellite P750 stops at the start of the 1st time but then works great 2nd time

  Hello
  My Satellite P750 always stops on the first time every day, but the 2nd boot works fine and no other problems...

  I press the Start button and it runs for maybe 10-20 seconds then stops... She does both on battery or power outlet...

  If I try to start again after that, it starts fine... sometimes, it gives the possibility to start in safe mode, or run the Startup Repair tool, but it always starts well and works normally...

  I tried to start repair when the option was given, and it is immaterial that the next day, he does the same thing again...

  Any advice appreciated, and Im a bit concerned that one day he did not start the second time...

  The laptop is only around the age of 6 months and otherwise runs great...

  Thank you

  Hello

  Recovery of the laptop back to factory settings.
  You use the Win 8 or Win 7 system?

  Usually, books Win 7 supports a HARD drive recovery by pressing F8-> fix my computer-> drive HARD recovery.

  If the same problem appears on the right after the system has been recovered, I guess there is a hardware problem and a technician must check the hardware parts.

• Hello.  Y at - it a means or an application to stop locking the screen EXTREMELY annoying on the Apple Watch.  It's clearly a myopic element for the Apple team because I can't even use the timer without being incredibly bored.  Thank you.

  Hello.  Y at - it a means or an application to stop locking the screen EXTREMELY annoying on the Apple Watch.  It's clearly a myopic element for the Apple team because I can't even use the timer without being incredibly bored.  Thank you.

  Hello

  You can enable the detection of wrist as well as an access code and unlock it with the iPhone:

  • On your iPhone, in the application of the watch, go to: My Watch (low left tab) > General > wrist Detection - this turns on.
  • On your iPhone, in the application of the watch, go to: Watch My > Passcode > Passcode turn on (choose a Simple 4 digit access code or a longer).
    • Also in the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually or unlock your iPhone. Then, it will remain unlocked until you delete the monitoring of your wrist, when that it locks automatically.

  You can also set your watch to the screen to reactivate automatically when you lift your wrist, even select what is displayed on the screen to wake up:

  • On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake:
    • Active screen Wake on revival of wrist, and;
    • Choose if the watch should resume last activity or see the Face of the watch.

• My screen saver does not work all the time, usually this seems to happen once the aircraft stopped in the energy saving mode.

  Original title: my screensaver does not work all the time

  My screen saver does not work all the time.  First time I have turn on computer, it works OK.  Later in the day, this isn't.  Usually, this seems to happen once the aircraft stopped in the energy saving mode.  After the reactivation of the computer (do not), the screen saver does not work when it should. How to run all the time?  I am running Kapersky Internet Security 2011.  This would be closed by the screen saver?
  Thanks, Garybuyit

  Hi garybuyit,

  Thanks for posting your question in the Microsoft answers Forums.

  Just so I'm clear, updated you the graphics cards in Device Manager? You have access to a Windows XP installation disc. If so, follow the steps in this document to make a scan of the SFC. This analysis will attempt to repair or replace any missing or corrupted system files.

• Export for actionscript - not in the first picture

  Just a simple question.
  Need to know if it works or not I tested it. What I want is to understand. Here it is:
  
  If I use the export for actionscript and I uncheck export in first frame, the element that is bound by the ID of the library to appear on the timeline. Normally, it should be in a framework that has played. Frame of IE 3, the element is there so I can use it from frame 3 to the last frame. Here's how it works for the _root. If I'm in a clip, the code can be on the first picture with a stop. This means that the article is about the second image and has not posted, but it is accessible by the code.
  
  Why?
  Why on the root element should appear on the frame where the code is or before the code, but if in a clip, the code can work even the item are on a frame over late which never shows because there is a stop on the first?
  
  Tanx for your help to understand!

  I think it's probably because of the way diffuse flash content. So that the flash to play frame 2 of the timeline, it loads COMPLETELY all the code and assets for the framework (but not the frame 3) and then "play" that govern. So on the main timeline code on frame 2 cannot access clips exported from Framework 3.

  However, if your video clip (for example) is about 4, flash will stream/view loading everything (including your complete moving clip) when the playhead reaches that govern, then all goods in this period are available because even 'play' 4 frame, flash to load the content of the entire movie clip.

• My toolbar disappeared completely. I still have the back arrows on the far left, but everything else is just... gone. I tried Firefox to stop and restart several times, but nothing does not change. All toolbars are checked in the view menu.

  July 13, 2010: My Firefox toolbar has suddenly disappeared, except for the back arrows on the left side. I tried Firefox stop and start several times, but nothing has changed. All toolbars are selected in the view menu... but nothing is visible!

  See the Navigation buttons such as back, home, bookmarks and recharge are missing

• I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?

  I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  When the iPhone is connected and Photos opens, select iPhone in sideba of the windowr of Photos. Then, uncheck the option 'Open for this iPhone Photos' below the toolbar.  Do this for all your iPhones. The hook should be unmarked for each device individually.

• Windows takes time to stop when the computer is turned off

  has had to reload xp without windows takes a long time to stop

  Hello

  Welcome to the Microsoft community!

  You re - install Windows XP and still have the same problem?

  During the shutdown of the Windows XP computer, it may take longer time to complete the shutdown process. Slow stops are caused a lot of factors. One of the causes is the clear pagefile at shutdown option enabled.

  Try the following steps:

  Use the Group Policy Editor

  a. Click Start, run and type in "Secpol.msc".
  b. click local policies | Security options.
  (c) in the right pane, set stop: clear the pagefile of virtual memory for people with reduced mobility.

  However, this setting is not the only cause of slow closures. No relevant programs and Services also contribute to slow closures.

  If the problem is seen recently after installing a driver software or third-party, try a system restore to see if that solves the problem of the slow stop.

  How to restore Windows XP to the previous step: http://support.microsoft.com/kb/306084

  I hope that helps!

  If you need further assistance on this issue or any related issue of Windows in the future please let us know.

• Records of Vista Media Center starts and stops at the wrong time

  I use Windows Vista Home Premium, SP1 and that you may have noticed that when I schedule recordings for some a particular channel, Media Center starts 2 minutes beforehand and ends 2 minutes in advance.  This affects only shows record from my local affiliate Fox - all other shows for other strings start and stop at the appropriate time.

  I checked the system clock with the start times of the shows and both are correct.  In fact, I saw one day Media Center started to record for a show that did not begin until 08:00 at 19:58 (according to the system time).  I had my TV on at the same time and was able to verify that the program in question had not yet begun, so the flow of the internet was sychned with the dissemination of local transmission.

  It's very frustrating because I miss the end of some shows and cannot always extend registration ends because I'm ordering another channel, the next hour.

  I have the same problem with the FOX network...

  -1 make sure your clock automaticly sets in the internet and update once by pressing the link (which makes that he can see the time server)...

  There are two ways you can go with this:

  -If your departure time is correct, then just go to the Planner and choose the program (or series) you are trying to install, select the recording settings (or adjustment of series) or advanced setting... There is an option to "stop recording" 1 min, 2 min, 3 min, 5 min, until 2 hours after the recording is finished... I have mine set to 5 minutes after, and she fixed it...

  -If the starting time is disabled (as mine is), to enter ERM and manuver to tasks > settings > TV > recorder > recorder defaults

  This is where you define all the flaws of the recorder, find "Start when possible" and "Stop when possible", 4 min value (max allows MCE)... Save and exit, restart the machine too...

  You should be good to go...

  PS, I just read the last sentence in your post, you must only have a tv tuner card in your machine (I have two, and that's the reason why I bought two), so you can always have a problem when recording two different channels (back to back on the same channel should work okay).

• Why the photo stops all the time by watching the video of youtube

  everything by watching videos on youtube picture stops all the time

  Hi erna eisenwort,.

  Thanks for posting in the Microsoft community.

  Before you start the troubleshooting steps, I need the information required.

  1. what web browser do you use?

  2 did you receive an error message?

  3 did you changes to the computer?

  4. this problem only occurs with the web site?

  If you use Internet explorer, I suggest you to see link and check.

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• Vista has stopped turning the games run for a long time.

  Vista has stopped turning the games run for a long time. The display would go crazy and the sytem would lock. Gotta make a stop with the power button. No errors are recorded. I re-installed the game. Same thing. I reinstalled Vista 64. Same thing. I get about 3 minutes in the game and then locking the. 1 single game still work (BioShock2). COD - MW2 and COD MW lock the sytem. One is direct install, and the other is the steam. I have a video card Nvidia GTX 280 with the latest drivers from Microsoft. Before the reinstall, I tried to install the most recent NVIDIA. Did not help. Yet the locks without showing error. About half of the time it stops at my off video card a few seconds after that the display goes crazy. BioShock uses DirectX 10, and others use DirectX 11. I read on some sites that 11 causes the video crashes on some systems. I want to know is why 11 is working for so long and stop NOW. Is there a way to make the games all run on 10? COD BlackOPS crashes too. I played ALL these games over and over again until the last 3 weeks. If there was some error to post logs I would but there is not. Any suggestions on where to find some kind of problem that could cause this? The video card was removed, cleaned and put back into the computer. Still crashes. 1 in 4 of the games will take place without any problems. 3 will be blocking of the computer and the video trash in 3 minutes or less to start the game. The video is great, until blocking.

  Suggestions on how to fix or where to additional troubleshooting for the cause will be greatly appreciated.

  Try running the memory and the hard drive scan to make sure that both are good.
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  If both check good, the map may be at fault. In which case it is overheating you can manually increase the fan speed in the Nvidia Control Panel.