STOP error 0x0000000A Vista

I'll start by saying that I am above average with computers, but certainly not an expert, so I apologize if I have to ask me additional questions according to some replies :).

I've had my computer for about 5 years now, and I have never had any problems in the past. Within the last week, he started running slowly, so I did a few different scans, and yesterday, I found a virus called "System Tool 2011". Apparently, he is well known to Facebook, so I could easily find a solution. Everything worked very well even until today when I got a STOP error message. I tried to restart the computer, all loaded fine, and then the STOP error occurred again after 2 minutes. This has always happened since a few hours now. I tried to start with "Last good known Configuration", but the same thing happens. I also tried to run a repair of the system, but she is to appear with an empty picture labeled "Different user" windows login screen, and I don't have a name and password for access. I tried to do a restore of the system as well, but for some reason any my restore points no longer exist. I don't know what else I can try, from the window of 2 minutes, I got when the computer load does not permit me to access anything whatsoever.

The exact STOP error I'm getting is the following:
STOP: 0X0000000A (0XC0000005, 0X82C555D8, 0X8975BB94, 0X8975B890)

There is no other information given, other than to contact the support for further instructions.

Any information would be appreciated, even if it is time to replace the computer.

Thank you
Rob

Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL
http://msdn.Microsoft.com/en-us/library/ff560129(v=vs.85).aspx I hope I could help

Tags: Windows

Similar Questions

  • BSOD (Stop error) on commissioning. Help, please!

    Stop 0x0000000A (0x00000002, 0x00000001, 0x00000000, 0x804DC11D)
    IRQL_Less_or_Equal

    First time this has happened only a few days ago. I had Windows XP Edition SP3 family.

    I could not understand the problem and eventually reformat my C: drive and everything seemed fine. Then suddenly alluva the error again.

    It begins one minute after I connect to my office, then after that I have to the windows startup screen and he mistakes for the BSOD.

    Each time, it's the exact same error, so I don't know it's coming from the same source. And I don't know how it would be a virus that I have a virus scanner. All I hope is that this is something I can fix it for a few months without constantly reformatting or wipe my D: drive as there are things there I need and don't want to spend a whole day backup stuff.

    An overview of this problem would be appreciated. And I can't log in to get a minidump. The stop error is all what I have.

    I checked the PCI (my gfx and 2 wireless cards) cards by taking out them and the problem persists. I also checked the RAM sticks last time it happened by removing one and try. the problem persisted. I think it may be the motherboard or hard drive related... which I am dreading.

    --------------------------------------------------------------------------------

    >.

    I googled and found this... Sorry if I'm not allowed to post outside links, but I'm 99% positive it's that one. Laughing out loud.

    http://www.ascendtech.us/ITEMDESC.asp?IC=MB4DELDIMEN3000

    Heck. It's so much more enjoyable when things are easy. ;-) Well, since you have reinstalled Windows make sure you have installed the updated for all your hardware drivers. You won't get the since the Dell for your Dell Dimension 3000 website. The best way to do is to enter your Service tag in the Dell support page.

    Once you have installed the updated drivers (and don't forget Desktop Software from Dell if this model has), if the problem recurs, then you for lack of material. Just get out the bits and putting them again - then it won't do not a complete waste of time. You need solve the material problems systematically. Dell has diagnostics which reach you by pressing F12 when the computer starts. You will see the start of the diagnostic utility option. Run full diagnostics on everything. It takes some time. If all goes, I would always test the RAM with Memtest86 +. We have seen many machines that passed the Dell diagnostics, but which had hardware problems. However, if the diagnostics show failures don't bother. Replace defective components.

    http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
    On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

    One thing to note - it is an old machine. If the motherboard is the bad part, it's time to just buy a new computer. It will be uneconomic to put hundreds of dollars into this old machine. Wait next week and buy a new Dell running Windows 7. MS - MVP - Elephant Boy computers - don't panic!

  • HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

    HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

    Hello

    Please do not type in capital letters because it's difficult to read and considered to be shouting.

    ---------------------------------------------------------------------------------------------------

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive download collected files and after shot/screenshot.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    The system has RAID? If so, it's also very suspicious.

    This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
    may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
    can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
    methods in the next message and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
    Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
    spyware/security programs.

    When you get to the pilot and sections of the memory of the troubleshooter check the following message to
    update drivers and memory test and then return to the troubleshooter if necessary.

    BCCode: 7F 0x0000007E which is also 0x1000007E

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
    interpret, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
    the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the
    • Reference of the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
    (the address of the exception) must identify the driver or function that caused the problem.

    If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
    has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
    Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
    • List of Microsoft Windows Marketplace tested products.
    • Service driver or defective peripheral system. A service driver or defective peripheral system can be
    • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
    • and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable
    or remove drivers or services that have been recently added. If the error occurs during startup
    sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
    Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
    in Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third remote
    control program. If this software is installed, you can remove the boot of the computer service
    by using the Recovery Console, and then by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the
    device or the driver that generated the bug check 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You should also
    Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
    For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or
    Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
    BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
    space, reduce the number of files on the disk drive hard target. Find and delete any temporary
    the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
    contain fragments of file saved to disk scans. You can also use another hard drive with more drive
    free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
    * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

    ----------------------------------------------------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Error update Vista 80070246

    I'm not able to install three updates to Vista.  Get the error code 80070246
    I tried to install several times... nothing doesn't.  Can anyone help.

    Hello

    When you try to download updates from Windows Update on a computer that is running Windows Vista, you may receive the following Stop error message:

    STOP 0 X 80070246
    ERROR_ILLEGAL_CHARACTER

    In addition, the following entry may be recorded in the WindowsUpdate.log file:

    Automatic updates failure content install installation failure: Windows failed to install the following update with error 0 x 80070246: 'update name '.

    Note The WindowsUpdate.log file is located in the following location:

    %WINDIR%\WindowsUpdate.log

    CAUSE

    This problem occurs if the GlobalInstallOrder.xml file is damaged. Globalisation...
    This problem occurs if the GlobalInstallOrder.xml file is damaged. The GlobalInstallOrder.xml file is in the following location:

    %Windir%\Winsxs\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990\GlobalInstallOrder.XML
     

    RESOLUTION

    To resolve this problem, replace the GlobalInstallOrder.xml file damaged on th...
    To resolve this problem, replace the GlobalInstallOrder.xml file damaged on the system with the same file from the Windows Vista installation media. To do this, follow these steps:

    1. Get the Windows Automated Installation Kit (Windows AIK) WIM filter driver. To download and install the Windows AIK, visit the following Microsoft Web site:

      http://www.Microsoft.com/downloads/details.aspx?FamilyId=c7d4bc6d-15f3-4284-9123-679830d629f2&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=c7d4bc6d-15f3-4284-9123-679830d629f2&DisplayLang=en)
    2. Click Start, point to programs, click Microsoft Windows AIK, right-click Windows PE tools command prompt and then click Run as administrator.

      If you are prompted for an administrator password, type the password. If you are prompted to continue, click on continue.

    3. At the command prompt, type the following command and press ENTER.
      MD c:\Mount

      This command creates a folder named mount.

    4. Put the Windows Vista installation media into the CD or DVD drive.
    5. At the command prompt, type the following command and press ENTER:
      ImageX/mount DVDDriveLetter\sources\install.wim 1 \mount
    6. At the command prompt, type the following command and press ENTER:
      CD\mount\Windows\winsxs\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990

      This command moves to the source folder

    7. At the command prompt, type the following command and press ENTER:
      xcopy %windir%\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990 GlobalInstallOrder.xml

      This command copies the GlobalInstallOrder.xml file in the destination folder.

    Kind regards
    Sohail Patel
    Regds, 'a journey of a thousand miles begins with a first step."

  • Blue Screen at shutdown - STOP: 0x0000 008F (Vista Home Premium 32-bit)

    Whenever I stop, I get a blue screen of death.  I had not used my computer for a few months, so I do not remember if the hardware or software has been added.

    I put the BSOD to stop so I could write the codes - I googled them came but with nothing.

    Here is what says the BSOD:
    STOP: 0x0000 008F (0 x 0005 C000, 0 x C4E3, 0 x AC2E DC0C, 0 x 0000 0000 8261)

    My system runs Vista Home Premium (32 bit) on a bridge 5442 with 4 GB of Ram and an Intel Core 2 CPU 4400 running 2.00 Ghz

    Any help or advice is most appreciated.

    Thank you kindly!
    Marilyn P

    Hello

    Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
    View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
    in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
    a pilot just HIDE. Antivirus is another possibility.

    See methods of update driver generic in the next message.

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Cause

    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    It comes to my convenience store generic bluescreen:

    Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
    Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
    codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
    information on all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

    You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
    system installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
    smile, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps and happy holidays!

    Rob - bicycle - Mark Twain said it is good.

  • Stop error BCCode: 124

    Hello;
    I have problem - see text type

    Signature of the problem
    Problem event name: BlueScreen
    OS version: 6.0.6002.2.2.0.256.1
    Locale ID: 1060

    Files helping to describe the problem (some files may be is no longer available)
    Mini072212 - 01.dmp
    SysData. XML
    Version.txt

    See a temporary copy of these files
    WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

    Additional information about the problem
    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA80091F1030
    BCP3: 00000000F2000040
    BCP4: 0000000000000800
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 256_1
    Information about the server: 47e7912a-2006-4c97-b4c0-127a3cc93d19

    Please help - what can I do?

    Concerning
    Sebo

    Hello

    Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
    It is just like it loses power or stop it in the normal way?

    Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
    in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
    air vents. Check that fans are working (before and after opening the case). When your laptop on all the
    You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
    test).

    This sounds like material so if the above does not help you then probably need help
    a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
    Support of system Maker.

    ===========================================================

    Pick up the pieces after a computer crash
    http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

    Check this thread for more information on using BlueScreenView, MyEventViewer and other
    Troubleshooting BlueScreens - top 3 responses (+ 1 other) methods.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ----------------------------------------------------------

    BCCode: 124 0 x 00000124

    This is usually heat related, faulty hardware, memory, or processor even if it is
    "possible" he is associated (rare) driver. To be able to remove ALL and reinstall all the cards, memory
    and cables (at both ends) - actually delete and replace - are not just tight. Ensure
    the system has proper ventilation - add a small fan blowing in the contributions. Carefully
    Inspect the card mother and other cards for damage. Pay attention to the fatal material
    error     implicitly. You may need a computer store real (not the leeks and glances at a BestBuy
    or other BigBox stores) or system manufacturer support.

    There has been a few cases where Norton/Symantec and other antivirus/security
    programs have caused this error.

    BCCode: 124 0 x 00000124

    Bug WHEA_UNCORRECTABLE_ERROR control has a value of 0 x 00000124. This bug
    verification indicates that an unrecoverable hardware error has occurred. This bug check uses the error
    data provided by the error Architecture WHEA (Windows Hardware).

    0 x 00000124<-- read="" this="">
    * 1289.html http://www.faultwire.com/solutions-fatal_error/the-System-encountered-an-uncorrectable-Hardware-Error-0x00000124-

    =========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Cannot start windows STOP error code: 0x0000C1F5.

    OT: Tent Windows Start, fails, try to restart, and fails again. STOP error code: 0x0000C1F5. Does not start with the DVD of resettlement. Won't do anything.
    Any suggestions?

    Hi Kya,

    You have made no changes to the computer before the broadcast took place?

    You can try the steps from the following links:

    This problem occurs because the Common Log File System (Clfs.sys) driver does not solve the $TxfLog file when the file is corrupted. In addition to the error message Stop Windows Vista may not start during startup until the offending disc is removed from the computer.

    How to get around the Stop error on a Windows Vista-based http://support.microsoft.com/kb/970101 computer 0x0000C1F5

  • Blue Screen of Death - message of STOP ERROR 0x0000C1F5

    Hello

    I had problems with my laptop. I can't have in windows, and I'm still stuck on the blue screen.

    What I tried to do:

    -Google various techniques of dealing with the blue screen. Which most mentions by pressing F8 to enter safe mode, it which didn't work.

    -Tried to use the (future shop) recovery disk that came with the laptop, which has also not helped me.

    This technical information:

    STOP: 0X0000C1F5 (0X00000000, 0X00000000, 0X00000000)

    Any help would be appreciated.

    original title: Blue Screen of Death

    Hello

    This error is somehow a special case:

    Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
    http://support.Microsoft.com/kb/946084

    How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
    http://support.Microsoft.com/kb/970101/en-us

    Stop error when you start a Windows Vista-based computer, even though hotfix 946084 is installed on
    computer: "0x0000C1F5".
    http://support.Microsoft.com/kb/958069/en-us

    Other methods:

    Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
    http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

    Easier to read same message
    http://BSODs.com/content/Windows-Vista-and-stop-0x0000C1F5-Linux-anyone

    SystemRescueCd
    http://SysRescCd.org/Main_Page

    Video fix
    http://www.YouTube.com/watch?v=Y_OjCkbZyTw

    Video Fix - Linux
    http://www.YouTube.com/watch?v=SwSvIhyZRVc

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • BSOD STOP ERROR 0X0000008E (0XC00000005, 0X8206CCC7, 0X98FBD91, 0X00000000

    System information: Kit installed: 8.0.0.1039 Kit install history: 8.0.0.1039 Shell version: 8.0.0.1039 OS name: Mircosoft Windows Vista Home Basic OS Version 6.0.6002 Service Pack 2 Build 6002 name NATALIA-PC system Manufracture Toshiba system system model Portable PC processor Intel (r) Pentium (R) DualCPU T3200 @ 2.0 GHZ - BIOS Version/Date INSYDE 1.30.-10/09/2008-langue English a problem has been detected and windows has shut down to prevent damage to your computer. If this is the first time, you've seen this stop error screen then restart your computer if this screen appears again. Follow these steps... Make sure you have space adeqate... If a driver is identified in the stop message, disable the driver or check the manufracture for driver updates... Try changing video cards... Check your hardware for the updates to the BIOS... Disable BIOS memory option such as caching or shadowing him... If you need to use safe mode to remove or disable components restart your computer press F8 to select advanced startup options, and then select Safe mode.    Technical information: STOP error: 0x0000008E (0xC0000005, 0x8206ccc7, 0x98FBD91c, 0x00000000) OTHER PROBLEMS IE opens off the screen...   ERROR 2013 disk is near capacity... STOP0x00000000A ERROR caused by Fcascsi.sys driver... Event caused SNA SERVER failure... Code19... Code37... Code31... Code39... SNA serverexecption0. C0000194 error cmicnfg.cpl... Internet application error in windows media player... Cannot install install shield 1607... Executing script... Impossible to open a new window by hyperlink IE... Unable to update windows online... Windows Update does not work! I tried the system restore, startup repair, cleaning disc, memory dianostics, check the disc and more without success to get windows to start normally. THIS PROBLEM HAS BEEN ONGOING SINCE JUNE 30 AND HONESTLY IVE TRIED EVERYTHING TO FIX PROBLEM & IM AT END & IT SEAM BECOMES ONLY THE PROBLEM WORSE CORUPTING OTHER PROGRAMS PLEASE PLEASE PLEASE HELP! Thank you

    Hello

    Update your driver, BIOS and any software of control and then work through the troubleshooting services
    above if necessary.

    Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
    Sites of the manufacturer of the device.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
    be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
    Then, get new ones manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Stop error code blue screen: STOP: 0x000000F5

    I am a student and I take 2 of my classes online.  As soon as I decided to take my classes online my computer starts to work again. I can't afford to take it to the cause of Squad of geek I'm behind in my classes. It happened already, blue screens, and I was about to start my classes then instead of he sends to a diagnosis, I thought I could solve the problem by simply installing a new hard drive. If that's what I did. About a week later, I got another blue screen and since I had just put the new hard drive and a warranty, I got and they fixed, does not really enter in what the problem was. Now about a month has passed and the dreaded blue screen is back. This time that I wrote all the error codes and everything I did to try to solve the problem. I guess only through diagnostic tests, and to install a new hard drive was a mistake, given that I spent $260 and the problem is not resolved. In any case, I'm sorry I got carried away with the details, but I'm desperate! Last night, I had the first blue screen and read it.  The usual "a problem has been detected and windows were shut down to prevent damage to your computer.

    Then he said (and this was the first and only time I've seen this message) "run a system diagnostic utility supplied by your hardware manufacturer. In particular, to achieve a memory check, and check memory faulty or incompatible. Try to change your video card. "And then the usual"disable any hardware or drivers and software, etc... Technical information: STOP: 0x0000007F (0x00000000, 0x00000000, 0x00000000, 0x00000000).  Then, I started it in safe mode w/network, ran windows memory diagnostic tool and it found nothing. Then I tried Microsoft fix google and I change video card. Ending me upgoing in the properties of my video card to find out information about the pilot. Somehow, I ended up on Intel' support and found a newer driver for my video card, so I downloaded it. But then I got the blue screen again. This time it read; "A problem has been detected etc..  FLTMGR_FILE_SYSTEM with Tech Info STOP: 0x000000F5 (0x0000006E, 0x87AD62F8, 0x87AD62C8, 0x00000000). Can you please tell me what is happening so I can solve this problem once and for all! Or should I just invest in a new computer?   Thank you for your time.

    Hello

    Since this has happened material suspect in particular hard drive and anything
    report (such as the motherboard and wiring) - also, malware or same antivirus/anti -.
    spyware/security programs.

    ------------------------------------

    You have ZoneAlarm or any 3rd party firewall installed? If so, this could be the cause.
    Other antivirus/security programs could be at least partially responsible.

    This fix "could" apply however do not use if you are quite safe.

    Two drivers of platform using WFP (Windows Filtering) causes a computer crash when the
    computer running Windows Vista, Windows 7 or Windows Server 2008
    http://support.Microsoft.com/kb/979278

    Check also:

    The General causes of errors "STOP 0x0000007F" (applies to Vista and Windows 7 as well)
    http://support.Microsoft.com/kb/137539

    ===========================================================

    Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
    http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

    For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
    If this thread - top 3 RESPONSES (+ 1 other).

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available the onedrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    Adding files to your OneDrive
    http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

    A disk - sharing files and folders and change the permissions
    http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

    ZIP or download the content of the C:\Windows\minidump

    Use OneDrive to upload collected files

    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ----------------------------------------------------

    BCCode: 0x0000007f 7F

    Have you added a hardware or drivers updated recently? Check Control Panel - Windows
    Updates to see if all drivers have been updated it just before what is going on has begun.

    For 7f - this could be a problem of material such as uncomfortable cards or memory, while there are
    other causes. Power electric low could also lead to this. Use the troubleshooters above and below
    and when you get to the drivers and memory sections refer to my next message below and then
    return if necessary troubleshooting services

    If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and ALL
    cable (try not just to close) on both ends if they are accessible and on the device ends if not
    (remove the cables and the resettlement of help them to eliminate minor corrosion).

    If a laptop or a PC, you will need to take a shop (not BestBuy or other BigBox stores) or your
    Support of the machine system.

    ----------------------------------------------------------------------

    BCCode: 7F 0x0000007F which is the same as 0x1000007F

    UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

    This trap might be a bound trap (a trap the kernel is not allowed to capture) or adouble foul(an error occurred during the processing of an earlier fault, which always results in a failure of the system).

    Parameters

    The first parameter that is displayed on the blue screen indicates the number of trap.

    The most common trap codes are the following:

    • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.
    • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.
    • 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.
    • 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.
    • 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault

    CAUSE

    0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

    A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

    Solve the problem

    Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

    The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

    If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

    Confirm that all hard drives, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

    If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

    Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menuof Advanced Options , select thelast known good Configuration option. This option is most effective when you add a single driver or service at a time.

    Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

    If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

    Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

    BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="" this="">
    * 1304.html http://www.faultwire.com/solutions-fatal_error/Run-a-System-diagnostic-Utility-supplied-by-your-0x1000007F-

    -----------------------------------------------------------------------------------------------------------------------

    BCCode: F5 0x000000F5

    The most common cause of this problem is a problem of hard disk or hardware connected to the drive
    as the mother/controller card and cabling. Other possible causes include antispyware/antivirus/security programs.

    Bug Check 0xF5: FLTMGR_FILE_SYSTEM

    Bug FLTMGR_FILE_SYSTEM control has a value of 0x000000F5. This indicates that a fatal error has occurred in the Filter Manager.

    Important information if you have received a STOP Code

    If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support.
    To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

    If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

    The following actions could prevent a mistake like this does not happen:

    1. Download and install updates for your computer from Windows Update device drivers.
    2. Scan your computer for computer viruses.
    3. Check your hard drive for errors.

    FLTMGR_FILE_SYSTEM settings

    The following settings are displayed on the blue screen. Parameter 1 indicates the type of violation. The meaning of the other parameters depends on the value of parameter 1.

    See this link for the parameters or the Faultwire link below.
    http://msdn.Microsoft.com/en-us/library/ff560383 (v = VS. 85) .aspx

    Cause

    The cause of the problem is indicated by the value of parameter 1. See the table in the settings section.


    Resolution

    If parameter 1 is 0 x 66, you can debug this problem by checking that your minifilter driver recorded a reminder after the operation for this operation. The current operation are in the structure of recall data. (See parameter 2). Use of the ! fltkd.cbd the debugger extension.

    If parameter 1 is 0 x 67, you must verify that you do not have a leak pool unpaginated somewhere in the system.

    If parameter 1 is equal to 0x6A, make sure that your minifilter driver does not refer to this file object (see parameter 2) to get a handle at any time during the processing of your minifilter of this operation.

    If parameter 1 is equal to 0x6B or 0x6C, then a State internal unrecoverable error has occurred causing the operating system bug control.

    If parameter 1 is equal to 0x6D, make sure that your minifilter driver does not call FltReleaseContext too many times the specific context (see parameter 2).

    If parameter 1 is equal to 0x6E, make sure your minifilter driver does not call FltReferenceContext after the context has been removed (see parameter 2).

    BCCode: F5 0x000000F5<-- read="" this="">
    http://www.faultwire.com/solutions-fatal_error/FLTMGR-file-system-0x000000F5-* 1242.html

    ============================================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • NVIDIA driver stop error 0 x 116

    Good so my problem was this [Hello, this morning, I put on my desk and a blue screen appeared saying it was a mistake. So I restarted in safe mode, and he said that there was a problem with NVIDIA Geforce 8300 gs. So I tried all the solutions given by windows (update), but windows says I have the latest version installed. So I opened the Device Manager and I uninstalled Nvidia geforce 8300 gs while in safe mode. Following that I restarted my computer (no blue screen this time) but everything was faded - yellow lines to be exact-Im assuming its because I uninstalled nvidia. But after starting Nvidia automatically installed itself again, and then he invited to restart the computer. I rebooted and then I got the same screen blue stupid, so of course, I had no option but to return to safe mode. What should I do... it pisses me really wide looking at this stupid discolored screen please help. A link to the latest version of Nvidia for vista would be nice.

    PLEASE HELP]
    Someone answered my question and gave me 4 different methods to follow (as uninstall Nvidia and then put it back in place and a system restore), after that everything was normal at startup (good color and all), and then 5 minutes later, the screen turned white and he started this blue screen.
    A problem has been detected and windows has been shut down to prevent damage to your computer.
    Try to reset the display driver and recover from timeout failed.
    If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again follow these steps:
    Check will ensure that any new material of the software is properly installed. Disable the Bios memory options such as implementing caching or shading. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced configuration options and select Safe mode.
    Technical information:
    STOP: 0 X 00000116(0X87A08008, 0X8CEF6240,0X00000000,0X00000002)
    nvlddmkm.sys - address 8CEF6240 base at 8CE09000, DateStamp 4ba95a19
    Data collection for the crashdump...
    initialization of the disk for the crashdump...
    Physical memeory start dump.
    Dumping memeory physics tp disk: 100
    Physical memory dump complete...

    Also I did a scan on "driver whiz" and it said that my Nvidia GeForce 8300 gs is obsolete. I have updated using Device Manager and he said everything was fine... so I don't know what the Devil's going on Please HELP!

    Hello

    This indicates that an attempt to reset display driver and recover a time-out error.

    Method 1:

    This problem occurs because the spurious interruptions are generated on the computer that uses Intel's Nehalem processors code-named. These disruptions are caused by a known erratum that is described in the following documents from Intel. To view these Intel documents, click on the following links:

    Intel Core i7 - 800 and Intel Core i5 - 700 Desktop Processor series updated Specifications, October 2009
    http://download.Intel.com/design/processor/specupdt/322166.PDF

    Another possibility could be a bad heart in the processor.

    Method 2:

    You can upgrade the processor and BIOS. It is advisable to contact the manufacturer of processor and BIOS for the same thing.
     
    Note    :

    Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    It can also happen due to overheating.
    Look for the time more than 70 ° c or higher than 30 - 35 c spend a cold boot.

  • STOP error after a virus and system restore failure.

    I caught a virus, accidentally deleted a user account, then do a system restore; During this process the computer stopped working. When I try to start Windows, I get this error stop-STOP: 0x0000C1f5

    I tried all the possible solutions available on the web. I use Ubuntu and can access all my files, however, I need to run windows.

    Help, please!

    Hello

    We also receive the stop error message when you start in safe mode?

    If this isn't the case, we can try to boot minimum troubleshooting:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    If so, then we do not have a Windows Vista disk or do we not have an option to boot from the recovery environment during startup?

    Let know us and we will move forward with this issue.

    Best regards

    Matthew_Ha

  • HP Pavilion a6745f stop error message

    Hello again!

    I'm new to the forum.  I've known a stop error message regarding hpqgpc01.exe.  He says that the program is unable to put end to, click to complete.  I recently bought an HP F4440 AIO.  I tried a solution of a post here. but it did not work.  Anyone has had or has this problem that can point me in the right direction to eliminate this problem?  Anyone know what this file is, exactlly?  AIO has to work properly?  I read a lot of articles and messages about problems with the work of the AIO with Vista.  I really like the IOA and it meets my needs very well, but I can't bear this message popping up every time I shut down my machine!  Any help would be greatly appreciated!  I am running Windows Vista Home Premium with Windows Media Center with Vista Service Pack 1 (64-bit), Athlon X 2 (B) 5050e 2.6 GHz (45W).

    Nice day!  Sorry for not responding sooner, but I just wanted to make sure that your solution worked for me.  And he did.  And I really, really appreciate you taking the time to answer.  Although, I think I found a solution, which, allows all functions to be used without the message annoying "shutdown" appearing.  In a previous post by J. Rhoades(posted 3/28/08) and it reads as follows:

    I got this info from a technician of the HP technical support:

    Go to start > run > services.msc

    Find 'HP CUE DeviceDiscovery Service', change the startup type to disabled, and then stop the service

    I must tell you, it worked like a charm... So far!  But, if he comes back, I'll be sure to post if/when this happens!  Thanks again loads!

    For the record, my questions to HP about this case was void avenue.  I made the mistake in using the Chat, in which you ask someone, I suppose, is in another country and it takes for always answering your questions and they seem to be not very well paid on questions about HP products.  So, I am very grateful, there are people who are willing to share their knowledge and experiences with others.  Looks like we have to depend on 'other '!  Thank you all!

  • Computer daily and random stops with laptop Vista Ultimate

    I use a laptop Toshiba Qosmio with Vista Ultimate.  The machine stops completely randomly on its own and I have to restart - which can take up to four minutes - I get a message in an unexpected way, the machine closed and restarted in XXXX seconds.

    This morning I got Excel (2007) and Word (2007) open and use my webmail (work and personnel).   I use Internet Explorer.  It is quite frustrating and I don't know where to start to try at the source of how correct the problem or address.  The machine is not quite 3 years and Vista Ultimate came installed on the machine.  I installed the Service Packs 1 and 2 on the machine.  I'm also trying to determine if I should Windows 7 would avoid most of these stop random downs.

    I am open to your ideas and I appreciate your help - I'm not a computer wizzard, so dumb down for me.

    Amy

    Hello

    Use the sections "BOLD" here to gather information.

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that causes the
    Crash.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Help blue screen Stop error

    If it received Blue error screen and auto restart past since I did the sp1 update. I have Windows Vista-32 and the error I get is:

    Stop: 0x0000008E (0xc0000005, 0x93F042F9, 0X92CD3C50, 0x00000000)

    Win32k.sys - address 93F042F9 base at 93E00000, DateStamp 4549aea2

    I need help here. I'm going nuts trying to figure this out. I would appreciate your help. Thank you.

    Hello

    Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
    Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
    other pilots to check there. Disable the installation of self as those who are older and if
    Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

    See methods of update driver generic in the next message.

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Cause

    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret
    You must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the
    • Reference of the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
    (the address of the exception) must identify the driver or function that caused the problem.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Make sure that all new equipment installed is listed in the
    • List of Microsoft Windows Marketplace tested products.
    • Service driver or defective peripheral system. A service driver or defective peripheral system can be
    • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
    • and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. Also, clear or
    remove drivers or services that have been recently added. If the error occurs during startup
    sequence and the system partition is formatted with the NTFS file system, you may be able to use
    Safe mode to rename or to delete the faulty driver. If the driver is used as part of the system startup
    Mode process without failure, you must start the computer by using the Recovery Console to access to the
    file.

    If the problem is associated with Win32k.sys, the source of the error may be a third remote
    control program. If this software is installed, you can remove the service from the system startup of
    using the recovery and then Console by removing the system service file incriminated.

    Check the system log in Event Viewer for additional error messages that might help identify the
    device or the driver that generated the bug check 0x1E. You can disable the cache in memory of the BIOS to try
    to resolve the error. You must also run the diagnostics of equipment, in particular the scanner memory, which
    the manufacturer of the system provides. For more information about these procedures, see the owner
    Manual for your computer.

    The error that generates this message may occur after the first reboot during Windows installation or after
    The Setup is completed. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For problems during the installation of Windows that are associated with the lack of disk space,
    reduce the number of files on the disk drive hard target. Search for and delete temporary files that
    you do not have to have, the files hidden Internet, backup application files and .chk files that contain saved
    fragments of files on the disc scans. You can also use another drive to hard disk with more free space for the
    installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    -------------------------------------------------------------------------

    It comes to my convenience store generic bluescreen:

    Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
    This would help. Such as ITC and 4 others entered at the bottom left. And another error
    information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
    Displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
    are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for