Stop the computer several times the error: "a script slows down your computer. It stops.

Similar Questions

• Make the desktop gadgets really slow down your computer? __

  I have several on my desk, varies it just on your computers memory, speed etc? In the Task Manager it shows like sidebar.exe runninng 49 112 memory, is that a lot? For example, it is the same use as my browser.

  If you have enough current execution, it could possibly affect performance, but all depends on how many resources use gadgets.  If you have an old PC with not much RAM, which would also increase the possibility.
  MVP - Windows desktop experience

• DaqMX wait the next sample causing slow down Clock.vi

  Hello

  I have a question about the proper use of DaqMX wait for next sample clock.

  I read channels analog voltage on a map or pcie-6259.

  I would like to read as soon as possible make your comments between each of these points of single data points.

  I wish I had an error generated if I miss a data point.

  From reading the forums, I've gathered that the best way to do it is using the Timed Single Point material.

  A simplified program that I use to test this is attached.

  If I remove the DaqMX wait for next sample Clock.vi, my program seems to work.

  I added a counter to check the total time is as expected.

  For example, the program seems to work at the speed appropriate for 120.

  However, without that vi, it seems that the program does not generate a warning if I missed a sample.

  So I thought that the next sample clock waiting vi could be used to determine if a single data point has been missed using the output "is late."

  However, when I add inside as shown in the joint, the program seems to slow down considerably.

  At high rates as 120000, I get the error:-209802

  14kHz is the approximate maximum rate before you start to make mistakes.

  My question is: is this the right way to check a missed sample? I don't understand why the wait next sample Clock.vi is originally a slow down. Without this vi, the program does just what I want except that I do not have strict error control.

  My confusion may be based on a lack of understanding of real-time systems. I don't think I do 'real time' as I run on an ordinary pc, so maybe I use some features that I wouldn't.

  Thank you

  Mike

  Mike,

  You should be able to read to return delays errors and warnings by setting the DAQmx real-time-> ReportMissedSamp property.  I think that if you enable this, you will see errors or warnings (according to the DAQmx real-time-> ConvertLateErrorsToWarnings) in the case where you use read-only.  I'm a little surprised that you have measured your application works at 120 kHz without waiting for next sample clock (WFNSC), although I'm not surprised that it would be significantly faster.  I think if you call read-only, you'll read the last sample available regardless of whether you would of missed samples or not.  When you call WFNSC, DAQmx will always wait for the next, if you are late or not sample clock.  In this case, you will wait an additional sample clock that is not the case in read-only.  Once again, I expect that, in both cases, your loop would not go to 120 kHz.

  Features real-time DAQmx (hardware Timed Single Point - HWTSP) are a set of features that are optimized for a one-time operation, but also a mechanism to provide feedback as to if a request is following the acquisition.  There is nothing inherently wrong with using this feature on a non real-time OS.  However, planner of a non real-time OS is not going to be deterministic.  This means that your app 'real time' may be interrupted for a period not confined while the BONE died in the service of other applications or everything he needs to do.  DAQmx will always tell you if your application is to follow, but can do nothing to guarantee that this will happen.  Thus, your request * must * tolerant bet of this type of interruption.

  There are a few things to consider.  If it is important that you perform the action at a given rate, then you should consider using a real-time operating system, or even with an FPGA based approach.  If it is not essential to your system, you might consider using is HWTSP, where you do not declare lack samples (DAQmx simply give you the most recent example), or you could avoid HW timing all together and just use HAVE request to acquire a sample at a time.  What is appropriate depends on the requirements of your application.

  Hope that helps,

  Dan

• about to buy a video.  It contains options for speed on the overview of the site, do get the same options to slow down the video down when I buy the video?

  about to buy a video.  It contains options for speed on the overview of the site, do get the same options to slow down the video down when I buy the video?

  The videos is not 'options '. They are exactly as described. You can use first to add slowed to any video. Correction of the one who is already slowed to normal speed may not produce get results.

  But to answer the question, the videos are exactly as in preview. It would be to you on how you change them and with which application.

• Unable to control the error message calendar get "check your account information and agree with him.

  I am unable to order a calendar in iPhoto.  Continue to receive the error message "your account information has changed.  "Please review you account information and approve it.  My delivery/billing address is correct.  Please notify.

  Access your account online and delete page and re-enter all billing information.  Also make sure you have the correct print product store deleted in the pane of the Advanced preferences in iPhoto.

  Restart and try again.

  

• Continue to receive the error - cannot download episodes of your workflow

  Hello

  I'm using feed burner to add to create RSS feeds to add my

  ITunes podcast.

  But, when I add this feed - http://feeds.feedburner.com/wordpress/ueef

  I get the error message - unable to download episodes of your workflow.

  I want to connect Itunes to thisblog - where I'll post my future podcasts. At the moment I have a test post with a link to the

  file (which is hosted on an account of google reader with permissions to be available for anyone who wishes to

  Download or listen.

  I'm new pod casting and not really sure that I can do to solve this problem.

  Will be grateful for any assistance.

  Thanks in advance.

  There is no file at the URL you give to your Feedburner feed.

  The blog that link you has a link of RSS, but there is no media files. The episode on the blog page has a link to a media file to Google Reader, but it does not play and also the URL has no extension (for example, .mp3) so he won't have a podcast.

  Google Drive caused a lot of problems, and the indications are that he is not a suitable place to host a podcast.

  WordPress will build a podcast for you, but you must provide the URL of file media that are a direct link to the file, the extension and play in a browser, rather than forcing a download. I can't advise on the specific features of Wordpress, but they have a help page at https://en.support.wordpress.com/audio/podcasting/

  You can also find it useful to consult my page 'help you get started' on podcasting at http://wilmut.uk/pc

• install the errors-vb script 2738

  How can I clear the script vb error 2738 install error.  I tried three products registry and followed procedures using the command prompt to install vb and jscript and received successfully and rebooted but still have the error.  I am at a loss.  Help?

  Hello

  The issue of Windows 7 you have posted is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 forum.

  http://social.technet.Microsoft.com/forums/en/categories/

• How can I put picture in photoshop?  Get the error message; Could not complete your request because Photoshop does not recognize this file type.

  How can I put a picture in photoshop?  I get an error message: could not complete your request because Photoshop does not recognize this file type.

  I'm just trying to bring a photo from the library of Photos on my Mac.  Help!

  Photoshop for beginners

  Somehow, I tried to answer you, I could solve this problem.  I tried to upload the picture and somehow, it came with the Photoshop window.  I clicked on "Editing" in the region, I needed to change, and this has been resolved.  Simple.  I just needed to do something very simple.   Thank you very much for your help!

• When downloading CS 5.5 on the direct link eventually slows down and stops.  How can I download the file?

  I'm trying to download CS 5.5 on my new laptop since my old one died.  I use found direct link CS5.5 download products.  It starts fine but it slows down and ends up by stops.  How am I supposed to download the entire file?  I use Chrome on Windows 8.1 if it made a difference.

  Add to that Anand has mentioned, please make sure that any online active defence system should be turned off (for example, Kaspersky, Norton or AVG). Also, if you are behind a corporate network, please try another network and check again.

• The dc7600 fan not slowed down speed

  I'm new here but I have no news for the repair of computers, a problem which therefore left me speechless!

  A customer brought me a Hp DC7600 SFF desktop computer and said that the thing is so loud it doen't want to use it.

  Card"Pentium 4 3.00 Ghz

  2 GB DDR2 533 memory

  320 GB HD

  Win 7

  I lit and was swept away, this thing is so strong that you does not think!

  I disconnected the chassis fan that he calmed down some but the CPU fan turns at 5400 RPM all the time, I can't get the fans to slow down! I tried to use the program Speedfan, it was a joke.

  I am at a loss for what to do and wondering if something on the Board that controls the speed of the fan go haywire. I also upgraded to the latest BIOS and that did nothing.

  When the computer starts, it seems frankly a small liquidation aircraft prepares for take-off!

  What to do, what to do? ANY suggestions would be most appreciated.

  Thank you for your comments/ideas and suggestions. I would recommend he get a newer system because I think it's history! We have done everything that we can and it's time to throw in the towel! Thank you so much!

• Slow down your Windows XP computer

  I know that Windows 7 has the "Ready Boost" function, but my computer is Windows XP, so it doesn't have this feature. How I would improve the slowness of my Windows XP computer?

  I know that Windows 7 has the "Ready Boost" function, but my computer is Windows XP, so it doesn't have this feature. How I would improve the slowness of my Windows XP computer?

  Edition with Service Pack of Windows XP _ _?

  System specs like processor manufacturer, the speed and number of cores; memory/memory RAM of the system; Device video/graphic card and if he has his own memory or sharing system memory; total amount and free hard drive space?

  Use Belarc Advisor (it is a link to download it, install it and get a report) to get some of this information.

  What antivirus application do you use?   (If you say that McAfee or Norton anything - you could help your speed by changing those - more information once you answer the questions.)

  What maintenance do you?

  May want to browse this list (and all the steps as stated in the order given).

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Delete everything is found.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Learned things that start when you turn on the computer and what you really need? Cut of those that you don't need? Seen what is really using the resources on your computer? Now that you have narrowed down to what is running at any given time...

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 15 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just the disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Now that you have free space and organized things on that drive...

  Cleaning the components of update on your Windows XP computer

  It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  Windows Update Agent for 32-bit Windows v7.4.7600.226
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Then use this fixit:
  How to get the latest version of the Windows Update Agent

  ... to make sure that you have the latest Windows Update agent. Why both? The first gives you a version that is known to operate, the second ensures that you have later.

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Visit http://windowsupdate.microsoft.com/ and performa customized a scan to see if you need updates.

  Can get new drivers for your card motherboard chipset, the video/graphics device and device network (among others).

• Makes a mess slow down your desktop computer?

  I have heard that having a lot of documents, photos and files on my desktop can slow down my computer.  My computer runs windows 7 and has a lot of available hard disk space.

  If you mean that you have a lot of files on your desktop, as appositive to shortcuts, the office is not the place to save files to-it's like having a draw just a lot of paperwork which is not in order, makes them easy to lose / move things

• Often, when you are working on several programs, a message button in my taskbar - REMINDER. At the same time my system seems to slow down. I have the possibility of closing the Snooze button every time, but it's a pain. How can I disable this?

  Can not find the topic in the manuals.
  System has been reinstalled after the total loss of the hard drive.
  Use HP recovery discs.
  This feature was not present on the original version of VISTA.

  Hi Starkt,

  1. You have all software reminder on your computer?
  2. What is the exact message?
  3. Who is the manufacturer of your computer?
  4. What edition of vista is installed on your computer?

  You can place your computer in a clean boot to verify which application is causing the problem.

  1. click on Start
  2. type msconfig in the Search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  1. in the general tab, click Selective startup.
  2. under Selective startup, clear the Load Startup items check box.
  3. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  4. click on OK.
  5. When you are prompted, click restart.
  6. after the computer starts, check if the problem still persists.

  After you identify which application is causing the problem, then you may need to uninstall and reinstall the latest version of the application.

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use
  http://support.Microsoft.com/kb/331796

  NOTE: TURN ON YOUR COMPUTER TO A NORMAL STARTUP AFTER TRYING THE ABOVE STEPS

  Try and let us know the answer.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Repeat steps. How can I get rid of the following warning: "stop the execution of the script or it will slow down your computer"... I click Yes to stop... the cursor disappears, replaced by (I).

  How can I get rid of this problem?

  http://support.Microsoft.com/kb/175500

  Go here and if you are comfortable editing the registry, there is a difficulty.

  I just started this for me I received these also.

• What does it mean when he says "a script slows down the computer running slowly?

  Whenever I'm on FACEBOOK, I get a grey inset block on the screen saying that something is causing a "script" and, therefore, my computer works more slowly.

  Ok

  See if you have a "My Computer" icon on the screen (your office).  Otherwise, you can just click on the button 'Start' (lower left corner) and right-click on 'My Computer' (near 'Control Panel').

  After you right-click and then opens a menu popup (rectangular box).

  Then just click on this box, where it is said, 'properties' - then a big box with:

  the speed of the processor is listed under "Processor" (turn where it says Mhz or Ghz and the number just before it (as one might say 1.9 Ghz or 333 Mhz ["hz" stands for hertz]).)

  the RAM will be also listed, perhaps under "installed memory (RAM).

  Also, I would like to know what is your brand-name of the computer and if you can find a model number (and how old it is would be useful).

  Thank you.