stop the random playback of music

Similar Questions

• Stop the flv playback when you exit the current image

  I searched countless forums (here and other sites) and have yet to find the solution I'm looking for (if all goes well, if it exists).

  I have an flv file is loaded by the flv playback component.  Everything works except that the video (and audio) continue to play even after you leave the frame on which is the instance of the component.

  I found a solution that stops the audio using: SoundMixer.stopAll ();

  But the video is still streaming and affect the performance of the site.

  I want to stop the audio and video, which means using the: playbackInstance.stop ();

  However, all of the solutions I've met basically say to add the stop function to all buttons that potentially could borrow the framework with the instance of reading.

  This seems completely tedious and bulky, especially because I have visible navigation buttons from my 'main' swf and MULTIPLE instances of reading I have are found within a swf loaded with its own navigation as well.  By the nature of the design, instances of reading will not always be on the scene calling references will probably trigger errors.  Of course, there are ways to do this with conditional statements, etc.  But it just seems like a waste of time.

  Is there a simple way to call playbackInstance.stop () to navigate away from the current image?  An event to listen to?  I forget one obvious answer?

  I really want to think that there is a more elegant solution than adding so much in bulk to each eventHandler for button on my site.

  Add an event listener for the removedfromstage event.

• Sometimes during random playback of music, next song starts from the Middle

  This has happened for about 2-3 months now. It is usually a rare event. Maybe its just me, but I feel that slowly becomes more frequent...

  In any case what happens is, while I'm listening to my iphone the shuffle, it starts the next song as usual, but sometimes this song will start from the middle. It's weird. It also happens when im jumping songs manually.

  -A.L.

  Start with the basic troubleshooting steps.

  First, try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone.

  https://support.Apple.com/en-us/HT204184

• Stop the random system, blue screen.

  Hi, my computer is windows 7 64 bit. for the past few months, my computer has been stop randomly, for example, while playing games, often it works fine. However, many times my computer just freezes and produces a continuous noise of stuttering. When I try to reset, sometimes it restarts successfully, and sometimes it isn't. my computer is an Acer Predator G5910. When I try to reset, it would not produce beep sounds and the little blue light does not appear. I wanted to wait a while later to restart. the computer freezes often also when I don't do anything. for example, if I went to the bathroom and to the left of the screen nothing running home computer, it would freeze again and I have to reset. Blue screens recently have popped up but disappear too fast for me see whats on it.  and sometimes, my computer works perfectly well. I have no idea what still recently, we used our warranty and they said they changed everything inside the computer. It is one of the technical information, I received in the blue screens: 0x0000001E (0xFFFFFFFFC0000005, 0x0000000012DA0D60, 0xFFFFF8800F2D68C8, 0 x 0000000000000000)

  nvlddmkm.sys - address FFFFF8800F2D68C8 base at FFFFF8800F278000, DateStamp 503f8bb8.
  There was no stop code.  I would really appreciate if someone could help me in this situation. I also want to clarify that I am not a professional on computers.
  Here is the link to skydrive for the latest dump files, that I could find.
  : https://skydrive.live.com/?cid=5c4d5ca7c75785d3#cid=5C4D5CA7C75785D3&id=5C4D5CA7C75785D3%21174
  Thanks in advance!

  Hello

  We have three audits of bug:

  LEAPC_INDEX_MISMATCHERREUR (1)

  This indicates that there is an inconsistency in the index of State APC.

  This is an internal error in the kernel. This error occurs at the output of a system call. One possible cause of this bug check is when a system file or driver has a sequence do not call system to enter or leave the regions controlled or critical.

  -It is usually hardware related bug control.

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  Nom_image: material

  MODULE_NAME: material
  
  0: kd > fffff880018c7548 ln
  (fffff880'018 c 7530)   ndis! ndisOidSendToMiniportDirect + 0 x 18 |  (fffff880'018 c 7620) ndis! ndisFQueueRequestOnNext

  ^^ It seems that the exception occurred in ndis! ndisOidSendToMiniportDirect + 0 x 18.

  PAGE_FAULT_IN_NONPAGED_AREA (50)

  This indicates that invalid system memory was referenced.

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  -----------------

  1 Intel Extreme Tuning Utility - Office control - uninstall as soon as possible.

  2 make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  3. If you're still crashing after what above, run Memtest for NOT LESS than 8 ~ (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• How can I stop the audio playback in plugins shipped from start without be clicked?

  I try to used audio plugins in my podcasts that are posted each week. But when I add a new plugin each week he begins to play as soon as you click on the site. I have six programs playing at once. How can I configure the settings so that must first click on the play button for them to start playing?

  Change audioplay to autoplay = "false"

  Nancy O.
  

• His jerky in Windows 7 and Realtek audio during playback of music - after the release of sleep

  Hello

  Lately I'm encounter problems playing music on my desktop PC and my house. My desktop PC is x 64 bit my home PC is x 86. What they have in common is a NVidia card (7300 on my PC at home while 9600 on my desktop PC) and MoBo integrated Realtek Sound Chip. The systems are up-to-date, the drivers are updated via the automatic updates. When I feel his jerky, I reboot the comptuer (s) and its good to happen for a few hours. I have no idea which can be triggered to become again a bit rough sound. Sound is at once during playback of movies using Windows Media Center (on my house cause of PC I don't watch movies at work lol: D), when you listen to music using media player or Winamp. Even when I'm not touching the PC so there's no great animation on the screen. If I turn off improvements in the sound Control Panel Applet, the sound is not so rough but will not solve this problem completely.

  Software that both computers have in common:

  • TeamViewer, Mikogo
  • Skype, Yahoo Messenger, Windows Live Messenger (rarely signed), Google Talk (still signed to)
  • NCP Secure entry Client (using actively at work, I already uninstall-ed on my PC at home, the sound still jerky)
  • VMWare Server ActiveX control installed through IE (already using actively at work, uninstall-ed at home, always choppy sound)
  • Last.FM, Windows Media Player, Winamp, VLC, Miro
  • Wuala
  • uTorrent
  • Daemon Tools
  • RDTabs
  • Picasa
  • FFDShow
  • 7-zip
  • SmartDefrag
  • Office 2007
  • Visual Studio 2008, SQL Server management tools
  • SpeedFan, HWInfo32

  Suggestions to better diagnose the problem? It's kindda boring.

  Thank you
  Levi

  For those who have this problem and want to see if this resolves for you too: Click on your start ORB, type "services", press on enter, find and restart the "Microsoft Antimalware Service.  Turn on real-time protection if it is always disabled and performed before.  Check your sound, and it should be fixed!

  Vincent,

  I thank very you much for the suggestions!  Finally, some useful tips!

  I used FADS latency Checker and received peaks of 27,000 when he started to be choppy, 50 000 when it was quite rough, and really bad it had reached its maximum about 75 000 - 80, 000.

  When not jump and everything seems fine, as after a restart, the spike is not even go above 500 (if so, rarely and much higher).

  I know that material resources was not my prescription, as I am running out of 8 logical cores of 3 GHz and have 6 GB memory triple channel high speed of at least 50% most of the time.  When the bad audio dropouts are produced, I confirmed this (0-3% cpu usage) and 3 + GB available physical memory, even with my page file off to improve performance.

  While the auditor of latency DCP everything was in the Red (high values), I started through my services running and restarts, one by one.  Then I got to 'Base filtering engine', which has a description of: "the filter Base (BFE) engine is a service that manages firewall and Internet Protocol (IP, IPsec) security policies and implements user mode filtering. Stopping or disabling the BFE service will significantly reduce the security of the system. It will also result in unpredictable behavior in IPsec management and firewall applications. "I proceeded to try to restart, which pops up a message saying that 3 other services will also have to restart to restart: IPsec Policy Agent, the Windows Firewall and Microsoft Malware Protection network pilot.  I clicked 'Yes' to restart all of them, and after a few seconds, windows tells me "Windows could not stop the engine service of filtering based on Local computer.  Error 1051: a stop command was sent to a service that depend on other services running on. "If I click Ok and I look in the STC audit program and my latencies are all still red way and reading too high.  At this point, the windows firewall is disabled, all other 3 services work well.  So I try to restart again, and he succeeds.  Instantly, my auditor DCP is back green and low numbers (<500) and="" all="" audio="" skipping="" has=""> I still don't know what Department it is, because it could be these 3):

  1. the base filtering engine of
  2. IPsec policy agent
  3 Microsoft Malware Protection network driver

  Update:   Now that my sound was turned off again, I have to debug more, but I can't even see the third listed throughout the services, either on or off the coast, but restart the Policy Agent IPsec has nothing.  I restarted Microsoft Antimalware Service since he was the only one that sounded related to #3 above, and that did the trick, DCP levels and without legs instantly fell more.  I always do the same thing every two days or so, or sometimes once a day (depending on how much I use my audio...? maybe?)

  So, does make sense that this service could cause problems?  This means that it is not a driver - correct problem?  If this isn't a Realtek driver problem then it is matter of microsoft and will be fixed - this is their service and software that appear to be the cause of the issue / conflict with the driver.  I guess it could be either a problem, but the realtek and microsoft can fix it if they want to!  It would be nice not having to do now almost every day just to use the sound

  Thanks again Vincent!

• Sound of the buzzing/stutters during playback and music or video

  I've had this laptop for a few weeks now, and since I was a strange humming noise every time I play music or watch a video.

  It seems as if the music made a break of about one second and made a HUMMING noise while doing so, then continues with music. It happens throughout the song/video.

  I've updated all the audio drivers a lot of times as well as the graphics drivers, I can't update the chipset drivers as there is no new still

  The strange thing, I found comparing my laptop to a friend, is that in my DEVICE MANAGER there are 4 high definition Audio devices shown Realtek + Bluetooth hands-free. I tried unistalling these so alone is there, but this does not solve the problem.

  I have:

  Windows 7 Professional 64 bit

  Realtek High Definition Audio

  NVIDIA GeForce 310M

  Chipsets Intel 5

  Thanks in advance =)

  Hello

  I suggest trying the methods provided below and check if the problem persists.

  Method 1:

  Open the audio playback troubleshooting utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2:

  What can I do on the audio problems, such as popping, crackling, or sound that plays too fast or too slowly?

  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions

  Method 3:

  See the link below which provides information on how to disable Audio enhancements:

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

  Thank you, and in what concerns:
  Naman R - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to stop the music in the iOS download

  How to stop the music in the iOS download songs? I accidentally clicked (stupidly) songs to download all the purchased. It will take some time and fill out my iPhone with music. I tried restarting and that did not help. It is also a priority on updating apps from the App store. I use the latest version 9.3.2 iOS iPhone 6.

  Thank you

  I will try to put the device in Airplane Mode, then signature of the iTunes and the App Store. Then try to disable airplane Mode. While you are not connected to the iTunes Store, you should not try to download on the phone once you turn it off airplane mode.

• After 9.2 update I can no longer drag to make fast-forward or rewind during playback of the video. I can now only click to jump forwards or backwards in 10 second increments. However, if I stop the video I can then drag to move forward or backward.

  After 9.2 update I can no longer drag to make fast-forward or rewind during playback of the video. I could do those before the update. I can now only click to jump forwards or backwards in 10 second increments. However, if I stop the video I can then drag to move forward or backward. I tried this on Netflix and Hulu with similar results. Apple TV restarting is not to solve the problem.

  Maybe a bug in the new version?  Does anyone else know this?

  Thank you!

  Many people complain when they reach around in the dark watching a movie they press and cause the movie ff or rwd.

  I think that this version tried to improve the situation by requiring the user to press and release the button then slide as formerly.

• Can I use the stop watch and listen to music offline

  Hi all! I am wanting to buy the bike 360 to use it for the race. The feature that interests me the most is the music offline reading, where you transfer songs from your phone to your smartwatch so that you can listen to your music without having to carry around your phone. This feature is ideal for runners, but I would like to know if I can listen to music and my short with a stopwatch, all at the same time time. Is it possible to do such a thing?

  Thank you!

  I just had time to check this. I could listen to music from my watch to my bluetooth speaker, then put the timer as well. I was also able to switch back without the reset timer or stop. I could also stop the clock and continue where I stopped it.

• My function paste decides to stop working randomly. What could be the problem and how could solve this problem?

  My function paste decides to stop working randomly. What could be the problem and how could solve this problem?

  A repair from the Vista DVD installation.  Don't forget to have a backup/restore point just in case.

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

• stop the display of the controls at the bottom of the screen during video playback on windows media player

  How to stop the display of control at the bottom of the screen during video playback on windows media player

  How to stop the display of control at the bottom of the screen during video playback on windows media player

  Use the following steps and controls will NOT appear when you play multimedia player mode full-screen:

  Open Windows Media Player > tools > Options > Performance tab > uncheck "Controls display full screen" > apply/OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• What happens to the data on the server if I stop the synchronization of users movies and music?

  Hi all

  I have a small question which is, what will happen to the data on the server if I stop the synchronization of users movies and music etc.

  The data will remain on the NAS or it will be deleted

  The domain controller is a Windows 2008 r2

  All of the client Machines are Windows 7

  Any help is appreciated

  Thank you

  Daniel

  Hi Daniel,.

  This question is more suited for a TechNet audience. I suggest you send the query to the Microsoft TechNet forum. See the link below to do so:
  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please let us know if you have more queries on Windows.

• How can Windows movie maker, I stop the music to a certain clip and not replay

  How can Windows movie maker, I stop the music, play a certain clip and not play again?

  1. Add the video file.

  2. on the home tab use Add music to add music to the full clip.

  3 move the vertical slider on the film to where you want the music to stop.

  4. on the Edit tab, select Split.

  5. now, using mouse cursor select just the audio running along the top of the video AFTER your split point.

  6. press delete on your keyboard.

  You could also do it by reducing the volume of the section of audio after the split to zero.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• stop the music during the scene change

  I make a game with AS3. I want to put different music in each context.

  So far I managed to start the music when the player enters a scene. But if it turns off, the music is still playing... (I want the music to stop when the players leave a scene).

  I do not understand why the music is still playing... Here is my code:

  public function newBackground(thisBack:String):void{ 
  var room = back.currentBack; 
  switch (thisBack){ 
  case "maisonExt": 
  var mySound:Sound = new exterieur (); 
  mySound.play ();

  My mp3 file is named "exterieur.mp3".

  If you can think of anything, it would be a great help.

  Thank you!

  If you want the music to stop, you tell him to stop.  The Sound class doesn't have a stop method, but done SoundChannel class.  You create a SoundChannel instance and assign to the transformation of Sound.play.  Then you can use it to stop the sound.

  var sc:SoundChannel;

  SC = mySound.play ();

  TCI Stop(); to stop the sound