stop used my Mac Pro?

Similar Questions

• I use a mac pro 2x3GHz. I don't know what I did, but since a few days I was not able to play videos from web sites like youtube. Can you help me

  I use a mac pro 2x3GHz. I don't know what I did, but since a few days I was not able to play videos from web sites like youtube. Can you help me?

  Hello joebat,

  It seems that some of your plugins (Shockwave Flash 10.1 r102) might be buggy or obsolete. To check for updates, please visit the plugincheck page. If this does not resolve the problem, try to start Firefox with the disabled modules and see if it helps at all. If so, delete the Shockwave Flash plugin and maybe reinstall or uninstall Firefox and do a new clean install.
  If that is not yet solved the problem, try the following troubleshooting steps: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html

  Thank you for your patience and please let me know how it goes.

• can I use 2 Mac Pro, the old and the other from different locations with the same apple ID?

  can I use 2 Mac Pro, the old and the other from different locations with the same apple ID?

  Yes. The only problem that I see if Macs were different countries. The method of payment in the account/ID must be associated with the country where the unit is located and you can only buy Apps from the store of the country where the computers are located

• Stop guard my Mac Pro (early 2008) and it is difficult to restart.

  I have a Mac Pro (early 2008) still works after the installation of El Capitan. The problem is that after a few hours he will leave, and to restart, I have to switch off/on power and try to restart several times. Sometimes, the fan runs at full speed. What could be the problem? Help, please!

  Have you blown dust lately?

  It starts better if left to cool for one hour about?

  If get you it to work again to get MacFanControl to see all time & the fan speed may adjust higher if too hot...

  http://www.CrystalIDEA.com/Macs-fan-control

• Mail has stopped working on Mac Pro 10.9.5. All outgoing mail says "this message has no content. Enabled connection, rebooted the mailbox. Anything out.

  Mail stopped working on my Mac sent two emails six then rejected the other four. Stuck in the Outbox with the designation "this message has no content. Click on the message and the attached picture shows in the email. I have checked the connectivity, tested the email account using my iPhone, no problem. Have deleted the box the letters and he added. None of my other accounts are no longer works. The initial issue is bell south.net but I tried gmail and it does not work either.

  You can check the settings of e-mail by the following site.

  https://www.Apple.com/support/mail-settings-lookup/

• Photoshop elements Adobe stopped working on Mac Pro

  in January 2014 Adobe photoshop elements bought at i-tunes store. Always worked correctly. Now as about a week, I can not start the program. After starting, he asked to Sign up with my Apple ID, when I do this it gives error message: your device or computer could not be verified. Please Contact technical support for assistance. Have already had a contact with i-tunes store, ce Let me not know that is something for Adobe.

  Please Comment!

  It sounds like a message from itunes saying elements is already installed on another computer.  is it what the message says?

  and you use your itunes password with your ID apple/itunes?

• Mac Pro keeps stopping, lightweight CPU a / b overtemp on

  I bought a used Apple Mac Pro 2.1 in December.  I use it mainly for editing my photos on Adobe PS, using filter of camera RAW.  The unit never gave me any problems, until early last week.  Here are the specs:

  | 8-CORE 3.0Ghz (2 x Quad-Core)

  | 32 GB OF RAM

  | 250 GB SSD

  | V RAM OF 4 GB GTX-680

  | Double BONE - El Capitan (primary) and Yosemite on two separate boot disks.

  All started early last week, with an error screen when I open an CR2 on Adobe PS file.  I got this message...

  "Camera Raw has temporarily disabled acceleration graphics processor because of the error." Update your graphics card driver may solve the problem. "Choose the option 'Use the graphics processor' in the dialog box Camera Raw prefer to re - enable GPU support.

  In 5 minutes, I when preferences and choose 'use the graphics processor', then continued my work.  Subsequently, the Mac suddenly stops without any warning whatsoever! No message, no noise from the tower itself, the power light remained.  I then turned off the power.  I waited for a minute and he went back on.  The password screen, it would be closed again.

  I then let the rest of the machine for 30-45 minutes, removed any buildup of dust inside using compressed air and turned on the unit return to perform minor troubleshooting. as well as other "light work" to avoid an overload of the system... He will stop in 35 minutes to turn on the machine.

  Still, I unplugged everything (including the power cord) to reinstall the two riser cards. I powered the Mac with the access panel open, to keep an eye on something unusual.  All fans are smooth running, no sign of problems.  Until I updated the driver (Nvidia Cuda) GPU, the machine will stop again in 10 minutes!  Frustrated, I opened the side panel to only discover, both red lights (CPU A / B) on the section of the overheating of the logic board.  After the recharge time, I restarted the MAC and ran a tempature monitor I have installed.  I noticed the radiator of the Northbridge turned very quickly when I was running Adobe PS, please refer to the picture I have attached.

  

  I have no idea what to do next.  I'm not sure if I need a replacement PSU, or something else entirely.  Pointers, help and/or advice.  I greatly appreciate it!

  Matt

  Run Apple Hardware test

  Using Apple Hardware Test - Apple Support

  If you do not have the original installation disc with AHT you can download it here and make a bootable USB or optical disc

  https://github.com/upekkha/AppleHardwareTest

  https://gist.github.com/drewreece/2e5eed7dbfbd5dd7e929

  Note that you need to download the specific to your model of Mac AHT.

• Mac Pro 2013 become hot, not answer and stop.

  Hello

  I have a 2013 Pro Mac, I bought as used before 5 months and he was well, before 3 days, the weather was warm (approx. 28 °) and under normal conditions, use my Mac Pro start freezing and not answered every 15-30 Minutes and automatically stop or I have to disconnect the power cable.

  I started looking on the problem, I checked the bodies of the Mac Pro and I found it very hot, the fan worked but slow, I searched on Google on a tool or a command I can do the fan faster and I found an application called SMC FanControl, this app showing me that Mac temperature of 48 ° also with this app, I was able to turn the fan to Max speed, I heard the noise of the fan, it worked perfectly with this app. The Mac Pro early to work perfectly also with in normal and hard jobs.

  

  Yesterday, I decided to clean all of my Mac Pro material, maybe that this solves the problem, it was dirty, and I did as new as you can see in this picture:

  I also used for better CPU and GPU thermal compound I found on the market.

  

  BUT the problem came with the first video editing, 48 ° c, closing down and not be able to turn it on for 5 Minutes.

  The question is: why my Mac Pro not control the fan automatically? is it a software or a hardware problem? If the material someone we know exactly?

  Best regards

  Which component was 48 c?

  What was the hottest component?

  It's not hot at all.

  From now on my MP 2013 with base CPU, CPU ITPP and CPU sensors 1-4 are about 100 ° C and speed of 84CFan two GPU time 1750

  • Record the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

  Search before the journal entry that begins with BOOT_TIME since it is the first line of a startup

  Apple cannot help you because you have disassembled the Mac.

  You already reset the SMC to take part. try resetting NVRAM/MRTP memory

  How to reset the NVRAM on your Mac - Apple Support

• Problem with Dell P2715Q and Mac Pro connection

  I have a Mac Pro 2013 with AMD 500, 64 GB RAM graphic card.  I just bought a pair of monitors Dell P2715 Q 4 K after using my 30 "Apple Cinema Display for many years.  Monitors properly function while I actually use and I can manually put the system to sleep (using the option-command-eject) and I'm able to wake the system by pressing the keys on the keyboard.  They work in 60 Hz mode UHD (3840 x 2160) and are connected with the display port (Thunderbolt) mini display port cables with that monitors came.  They are connected to two of the three bus TB. The problem is that when I restart the computer (or stop and start up), the monitors will automatically in their 'power save mode', and the Mac Pro does not seem to recognize that they are there, trendy, so I get two blank screens... no way to connect, because there is no current login screen.  The only way I can actually connect and begin using the computer is to connect an old 23 "Cinema Display, connect, and then connect the two valleys and unplug the 23". Yes, I can leave the computer and he just put the system to sleep, but when I need to close for a software update or the failure, I won't have to drag another monitor comes to start using the Mac Pro.  I have 27 days to return if necessary Dells.  Anyone have any ideas on how to solve this problem?

  That Mac has made recognition of the display for a long time consists of sending a query to display at certain times, by asking, "what is your name, and what are your skills? If these screens are asleep, they fail, and then they stay dark.

  These times are:

  shortly after the market.

  upon awakening from sleep

  When inserting the cable end Mac

  Since the Option-(detect poster) button in the display panel.

  Perhaps there is another way, you can arrange to have the display be awake when the Mac it sends the request?

• The cursor on my mac pro will not respond to commands to open a page or select anything.  Any suggestions

  I use a Mac Pro and had problems with my cursor does not not at the controls.  I had not updated of Maverick.  I called apple and the first step was to upgrade to El Capitan 10.11.3.  I did this and still have the problem where the cursor will not answer orders intermittently.  It will stop unexpectedly and restart unexpectedly.  Any suggestions?

  Try another mouse/pointing device.

  It works in Mode safe?

  OS x: what is Safe Boot, Safe Mode?

• Pulls plug wrong Mac Pro?

  I use a Mac Pro 2012 environment; run the Mavericks OS X 10.9.5.  I was running "Disk utility" my Mac Pro is stuck in some sort of loop (I think):

  1. the Force Quit option did not work for out me of trouble.

  2. I tried pressing the switch "power", but that no longer works.

  3. I pulled the power cord from the power source.  It worked.  Then I reconnected the power cord and started my Mac Pro using the "switch".  Question: I did a lot of damage to my Mac Pro by pulling on the supply cord to stop my Mac?  Do you think I should buy and install a new hard drive?

  It is never a good idea, unless you have completely into it as you were. You left some disk problems, but there is a fair chance to run repair disk will correct them. The best thing to do is restart the SHIFT key now. The start-up will take much longer time than usual, run repair disk, you can restart normally.

• updated my mac pro early 2011 book now really running hot

  I wanted from the upgrade of my mac book pro early 2011 I7 quad core 8 G ram 2T HDD

  So I finally did. I like it, but now my mac runs hot 116 degrees. the fans are running.

  boot time has also more he takes more time.

  I used my mac pro for dj book I also do a video mixer.

  run final cut pro x no problem

  I also do recording on a DAW. never had any problems so far.

  I understand is difficult to test on all models is a solution for this.

  I thought he was going to improve performance, I don't see it seems to take more time during startup.

  How about this circle just turn around.

  I know that you guys try.

  I hope hear from you soon.

  Thank you

  Run programs of type DJ on an Early 2011 MacBook Pro, while also on El Capitan put quite a strain on the machine. Programs of DJ using just the music will pull a use much more memory and CPU than normal, not to mention video mixing as well. That being said, you use a USB jack in a box/audio mixer (like SL3 or Pioneer DJM900) or you use a DJ controller?

  I do not think that 116 degrees is too abnormally warm for the type of stress you put on the machine. I would possibly consider a SSD drive. Not only will improve performance, but because you will have parts in SSD, as you would in a standard hard drive, the machine should run cooler.

• Mac Pro 2009 will not start, no edge

  On Thursday, June 16, I sat to use my Mac Pro early 2009. I noticed that my Mac would not wake up by mouse click or the SPACEBAR on the keyboard. The led on my Mac, so I immediately thought that it was a problem with the graphics card.

  I force shut down the Mac by holding the power button. I waited 10 seconds and turned on my Mac back, everything was fine and I worked on my Mac for 3 hours.

  Last night 18 June I sat watching television when I heard the ringtone on my Mac Pro, I realized was a reboot. I went to the wire and connected and everything seemed fine. However later in the evening, I noticed a flashing LED on one of my two monitors. Once the Mac was on (fans spinning) but no signal to the monitor.

  I made another force off now the power button on Mac, but now when turn on the Mac there is no boot chime or control signal.

  I upgraded the graphics card to an AMD Radeon Sapphire HD 7950 in April 2013.

  Any advice would be much appreciated as I'm in the middle of a big project.

  Could also be a Mac Pro RAM chip inyour failure, sounds almost identical to a question I've had recently, I found the missing question when I removed the memory card.

  If one of the pair of cards, you will need to remove two cards.

  Try taking the memory OUT n test each module one at a time. Also check RAM editing maps, if none of the four lights on the two cards is turned on it idicates a defective module.

• Mac Pro early 2008 adding ram problems

  I recently added RAM to my Mac Pro early 2008. The Mac Pro recognizes only 4 of 8 memory locations. I moved the slots and moved the memory and all slots and all the memories are good. No matter where I put them, or what memory I use, the Mac Pro will see 4 of 8. Any suggestions? Yosemite run 10.10.5, trying to fill all 8 locations with 800 mhz 2 GB DDR2 FB - DIMM.

  Ron

  How are new?

  Where have you bought the new?

  All new are identical?

  All the 'old' are the same?

  What is the size of the old and new?

• Xserve/Mac Pro connectivity?

  I was wondering if I could use a Mac Pro as part of a setup of the Xserve. IM thinking as an installer of the Xserve from would increase good expansion capability than a Mac Pro and a NAS/SAS (Im most everything about Apple products)

  Maybe something like one of these Apple Xserve RAID units and perhaps one of 3 bays farm