Stop Windows 7 BSOD 0x0000000A code

Hello

I started having BSOD in my two year, Windows 7 Home Premium edition desktop PC on 08/12/15 after an automatic update of Windows and then get their most frequently every day since.  The minidump lists always stop Code A to NTOSKRNL.exe + 73c40 as the offending code.  What I've tried so far:

  • BlueScreenView installed
  • Opened the case and clear any dust of fittings of air circulation where it could have been due to overheating
  • A ran Memtest86 for 10 assists without reported errors (8G of RAM)
  • A ran chkdsk with no error reported.
  • Tried to manually run Windows Update - get BSOD Stop Code 50
  • Tried running a full virus scan - get BSOD
  • Uninstalled SuperAntiSpyware and Avast, install MSE - produced complete sweep of the BSOD
  • Run the full scan MSE properly in Mode safe
  • Using Device Manager, try to update the drivers one by one in Safe Mode.  Among those that I tried, most respond that the existing driver is up-to-date.  The ATI/AMD video driver did however update.  However, as soon as I press the mouse in Normal mode, he returned BSOD.

I'm not a gamer nor I am overclocking (whatever it is) anything.  I would like to believe that my BSOD is related to the software, but am now short of ideas on how to proceed.

The only two actions absolutely will be 100% of the time product Code A BSOD Stop are: 1) try any virus (quick or full) of any of the three scanners scan I tried - get the BSOD in a minute; and (2) try a Windows Update - produced the BSOD once I select an update to download and install.  Otherwise, they seem to appear randomly in about 5 minutes after the start.

I think my next steps are:

  1. Restore the PC to a restore before the 08/12/15 point (but then how I never go forward again?)
  2. Try the driver verifier (although the debate surrounding this step sounds scary)
  3. Repair Windows from the CD (although if it is a non-Windows, the origin of the problem driver, how can he help?)
  4. Re-install Windows on a hard drive clean (a lot of work to reload everything)
  5. Buying a new PC (groan)

Any help would be greatly appreciated.

The most recent minidump are at: https://www.dropbox.com/s/savjud82p70i6io/121715-16894-01.dmp?dl=0

Hello

We can successfully close this thread.  The source of my BSOD has proved to be the four old vestige McAfee drivers.    My Dell PC of 2012 has been preloaded with McAfee and I must not have successfully uninstalled three years ago.  For anyone else who may be looking for a BSOD from 0 to stop Code referencing NTOSKRNL.exe + 73c40, the key for me was to find a file to mcafee under c:\program files\common files and also several pilot named MFExxxx.sys in the folder c:\windows\system32\drivers.  When I ran check, he scored these MFE drivers as being loaded.  I don't know exactly how and why they were active in my PC.  Maybe a registry key to load.  Since McAfee is not listed as a product registered in my PC, they have not updated successfully since installation in 2012.  They were apparently benign drivers for the last 3 years until 08/12/15 Windows Update which turned them into little evil monsters.  To remove all the remains of McAfee, search for "Tool McAfee Consumer Product Removal" in your favorite browser.  Download and run the latest version of MCPR.exe to purge your system.  No BSOD more.

Ken

Tags: Windows

Similar Questions

  • Windows 7 BSOD and receiver code error BCCode: 9f

    Original title: Windows 7 BSOD
     
    Hey guys I just built my first system and it was a lot. I used the trial version of Windows 8 64-bit for about a week I had to wait for my windows 7 to arrive. Windows 8 everything went fine with no problems. Then I installed windows 7 and ever since then, every time I leave my system alone for an hour or two, I'll be back to see that it crashed because of this error message below. Can I use my computer all day, video, editing, etc, but when I close all and leave for an hour, I'll be back to see that I have broke down. I try to leave it overnight to install my steam on games but crashes after about an hour.
    Any help would be great.
    Error message:
    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033
    More information about the problem:
    BCCode: 9f
    BCP1: 0000000000000003
    BCP2: FFFFFA80070A4A10
    BCP3: FFFFF800047C43D8
    BCP4: FFFFFA80097AB010
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 256_1
    Files helping to describe the problem:
    C:\Windows\Minidump\122112-20077-01.dmp
    C:\Users\Ryan\AppData\Local\Temp\WER-58203-0.SysData.XML
    Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
    If the online privacy statement is not available, please read our offline privacy statement:
    C:\Windows\system32\en-US\erofflps.txt
    Data sheet:
    Intel i5 3570 k @3.4 ghz
    Cooler Master Hyper 212 Evo
    Z77 UD5H Gigabyte motherboard
    EVGA Gtx 670 FTW
    Corsair Vengeance 8 GB 1600
    Corsair HX 750w PSU
    Seagate Barracuda 7200 rpm 1 TB
    Cooler Master Storm Stryker
    Edit: I thought it might have something to do with memory, so I ran Memtest 86 + 4 hours and had no error: P

    Hello

    Thanks for posting your query in Microsoft Community!

    According to the description, you are receiving BSOD (Blue Screen of Death) and receive the error code BCCode: 9f.

    To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:

    Did you do changes on the computer before the show?

    I suggest to follow the steps of the items listed below and check if it works.

    Error message when you try to resume a Windows 7 or Windows Server 2008 R2 to Hibernate computer-based: "Stop 0x0000009F"

    http://support.Microsoft.com/kb/977186

     

    Stop error when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby or into hibernation, or when you restart the computer: "0x9F".

    http://support.Microsoft.com/kb/975599

     

    stop "0x0000009F" error message when a computer enters and fate of putting into hibernation in Windows 7 or Windows Server 2008 R2

    http://support.Microsoft.com/kb/981848

    Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • Windows stopped using IrDA serial cable, code 43

    Windows stopped using IrDA serial cable, code 43

    error code 43

    Hello

    Before solve us the problem I need more information on the issue, that you face.

    -Since when are you facing this problem?

    -Don't you make changes to your computer before this problem started?

    -Whan exactly you receive this error message?

    However, before you try the following steps, I you suggests to create a system manually, Restore Point so that in this case, a problem occurs when performing these steps, you can always perform a system restore and restore the computer to the back.

    Follow the steps below to check what deive is the origin of the problem and uninstall and reinstall the device.

    1. click on start

    2. in the search box of start press and "devmgmt.msc" type entry

    3. in Device Manager, look for the device that has a mistake and expand the device with the error.

    4. right click on the device with the error and uninstall it.

    5 restart the computer and check if it installs the drivers and it works great.

    Access the link below to learn more about error codes:http://support.microsoft.com/kb/310123

    Note the above article is for Windows XP and the same is valid for Windows Vista.

    If the steps above do not help, you may need to contact the manufacturer of your computer and check if they have any updates on this issue and a fix for this.

    I hope this helps. Let us know the results.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • i7 - 2600 k on Windows 7 BSOD issues

    I'm having a problem with Windows 7 and World of Warcraft.  I'm not very well filled with code it (again, I am currently in school for her), but I can build and configure computers.  Anyway, dump files do not speak to me how they could some of you so here.

    https://docs.Google.com/open?ID=0B4L7RMcYZxlBNm55S3dOREh2VVU
    https://docs.Google.com/open?ID=0B4L7RMcYZxlBclM4OG9xSXlFTmc
    https://docs.Google.com/open?ID=0B4L7RMcYZxlBM2wzVUx3bm1rWDQ
    I hope someone here can help.

    Hello

    Don't forget to check with their forums and support of the game Builder as it is possible for
    gambling problems or others to be involved which are known for their. Considers that a
    absolute must do.
     
    ------------------------------------------------------------------------------------------------------------------

    Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
    It is just like it loses power or stop it in the normal way? Heat associated
    does not always mean too much heat because it is very possible that something is too sensitive
    to normal levels of heat, even

    Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
    in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
    air vents. Check that fans are working (before and after opening the case). When your laptop on all the
    You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
    test).

    This sounds like material so if the above does not help you then probably need help
    a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
    Support of system Maker.

    =================================================================

    Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Check this thread for more information on using BlueScreenView, MyEventViewer and other
    Troubleshooting BlueScreens - top 3 responses (+ 1 other) methods.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    ==================================================================

    Results verified BlueScreenView WinDBG / DumpCHK.

    The Bug_Check were all GenuineIntel 124 CAUSE pointing to the processor that
    isn't a certainy. It is possible the CPU, heatsing, the compound between them or even
    drivers or other causes to participate.

    Error checking 124, {0, fffffa8010ad5028, be200000, 5110 a}
    Probably caused by: GenuineIntel
    MODULE_NAME: GenuineIntel
    Nom_image: GenuineIntel
    FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE
    BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE

    BiosVersion = 3302
    BiosReleaseDate = 15/05/2012<-- the="" bios="" is="" very="" up-to-date="" however="" there="" is="" a="">
    He is involved with ASUStek for updates, check the chipset of low level drivers and the
    leading edge and separate device drivers.
    BaseBoardManufacturer = ASUSTeK Computer Inc..
    BaseBoardProduct = SABERTOOTH P67
    BaseBoardVersion = Rev 1. XX

    1. be sure to use the steps indicate above to reinstall all the memory cards and cables. Check
    the vents to be sure, they are clear and that all fans are functioning.

    2. check the Processor heatsink of heat and the compound between them.

    3. check with ASUStek support, their drivers and documentation online and ask in their forums
    about known issues with this model.

    ASUStek support
    http://support.ASUS.com/

    ASUStek Forums
    http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

    ASUStek drivers
    http://support.ASUS.com/download/download.aspx?SLanguage=en-us

    4 use all other methods in the troubleshooters below and those in the next message.

    ----------------------------------------------------------

    BCCode: 124 0 x 00000124

    This is usually heat related, faulty hardware, memory, or processor even if it is
    "possible" he is associated (rare) driver. To be able to remove ALL and reinstall all the cards, memory
    and cables (at both ends) - actually delete and replace - are not just tight. Ensure
    the system has proper ventilation - add a small fan blowing in the contributions. Carefully
    Inspect the card mother and other cards for damage. Pay attention to the fatal material
    error
    implicitly. You may need a computer store real (not the leeks and glances at a BestBuy
    or other BigBox stores) or system manufacturer support.

    Check the processor heat sink having and the compound between the processor and
    the causes of the heatsink that are common.

    There has been a few cases where Norton/Symantec and other antivirus/security
    programs have caused this error.

    BCCode: 124 0 x 00000124

    Bug WHEA_UNCORRECTABLE_ERROR control has a value of 0 x 00000124. This bug
    verification indicates that an unrecoverable hardware error has occurred. This bug check uses the error
    data provided by the error Architecture WHEA (Windows Hardware).

    0 x 00000124<-- read="" this="">
    * 1289.html http://www.faultwire.com/solutions-fatal_error/the-System-encountered-an-uncorrectable-Hardware-Error-0x00000124-

    =========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (updated drivers manually using the methods above is)
    to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    Stop Windows 7 to automatically install device drivers
    http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

    How to disable automatic driver Installation in Windows 7 / Vista
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
    Ultimate and Enterprise)
    http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How can I stop windows vista without updating the updates

    How can I stop windows vista without updating the updates because it affects my computer in error mode and I have to restore to get vista to startup after I reopen it later

    Hello

    You can change the settings for windows update to check for updates but let me choose whether to download and install them.

    Change how Windows installs or notifies you of updates

    You can also check in the update to the update history recently failed, double-click the update to get the error code and let us know.

    See the Windows updates are installed

    You can also read the following article to reset the Windows Update components and check.

    How to reset the Windows Update components?

  • DVD/CD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.

    My CD/DVD RW optiarc dvd rw ad-7560 s ata device suddenly stopped working I get a "code 10 this device cannot start.  I have uninstalled and still get this error.  When I put a CD in nothing happens.  It is not read.  Any suggestions?

    Hello

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104/

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • CS4 Design Premium I migrated to my new laptop, but when I try to enter in InDesign or Illustrator, I get message "license for this product has stopped working... error code 150:30.

    CS4 Design Premium I migrated to my new laptop, but when I try to enter in InDesign or Illustrator, I get the message "a license for this product has stopped working... error code 150:30" how to re-enable programs CS4? Thank you.

    Could you please check the solutions:

    1. License for this product has stopped working error 150:30
    2. Error: "License has stopped working". Mac OS
    3. Error: "License has stopped working". Windows

    Concerning

    Stéphane

  • Newbie: windows form designer generated code

    Hello

    I am new to MeasStudio and VB.   Currently using MS VB08 with 8.5 MeasStudio of NEITHER.  I am again the example of or 'BasicSignalGeneration '.  Unfortunately, with the User Interface and full hand, I am unable to compile and run the program.  I realized a large part of the code is missing, namely the section "Windows Form Designer-generated Code.   My question is how to generate this section?  This is not generated by the VB?  I tried a cut and the last operation, but that did not

    At the start of the project, I chose the model VB Ni Windows Application.

    Thank you

    Agent K,

    The Windows Form Designer-generated code is generated when you use the design view of your project where you see the user interface of your program.  When you drag the controls there and change their properties, the mode of creation generates the code in the "Windows Form Designer generated Code" section.  How did you create your UI file?  If you started from scratch with a VB NI Windows Application project and then dragged the controls on the design view, this code must have been generated.

  • Compaq Mini CQ 10 101SA no Windows XP sound error code C00D11BA drivers missing

    Compaq Mini CQ 10 101SA no Windows XP sound error code C00D11BA drivers missing

    Hello

    I have a Compaq Mini - about 3 years - and the noise disappeared today.  The sound icon in the lower right corner of the screen disappeared.

    In the device, other devices Manager screen is color yellow as is the Audio on Bus High Definition Audio device.

    XP sounds and Audio devices Volume Control Panel tab no. Audio Device.

    I think that the driver may be missing?  I don't have the start up CD and don't know where or how, download the drivers of its replacement.

    Any help is appreciated to get my sound back!

    Hello:

    This is the page for support and drivers for your laptop.

    You can try reinstalling the audio driver XP from there.

    http://h10025.www1.HP.com/ewfrf/wc/product?product=4105117&cc=us&DLC=en&LC=en&query=CQ%2010%20101SA%20&tool=

  • How to stop Windows Update to take keyboard focus, when you are asked "do you want to restart now?

    Windows Update often wants to restart the computer after an update.  If you say "not now" (or ignore?), he will later pop up a question "reboot now?" in a bubble of task bar.  INCREDIBLY, it will at that time take keyboard focus of everything that happens and then accept what he gets as a response from the user.  This means that if the user was in the middle of typing something, the following sequence of keys will enter the bubble "you want to restart" instead of some request the user was in the middle of the help.  It's very bad.

    Here is what just happened to me.  I was in the middle of typing a document when the keyboard focus was suddenly taken by the issue of recovery, a fraction of a second later, the following combination of keys, he disappeared - I have no idea what hit it.  Fortunately, I saw the flash and guess what had happened and quickly you press 'save' on my request.  A few seconds later, my application has been closed as the machine restarted.

    I think that the bubble of Windows Update SHOULD NOT STEAL the KEYBOARD FOCUS.  I think it's dangerous and bad design.

    What is the best way to communicate this suggestion to the team of Windows Update?

    Is there a setting to stop Windows Update to do this?  (Stop stealing keyboard focus)

    I use Vista Home Premium

    I'm looking for a Microsoft solution for the specific problem I described, and/or advice on where post for better attention to Microsoft to "design problem".

    None of us are obstruction you. If we knew a way to avoid this problem (problem), we would have mentioned it earlier in this thread.

    You aren't the first person to complain about this and I'm sure you won't be the last. According to Microsoft, you have two options:

    1 use an automatic updates setting other Automatic (for example, download updates but let me choose whether to install them). or...

    2. turn off the automatic updates and get your updates manually (which I don't recommend).

    See...

    Windows Update for Windows Vista Help
    http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • A problem to stop windows work properly. This message appears after sudden auto restart.

    A problem to stop windows work properly. This message appears after the restart and sudden auto off.

    Computer: dell inspiron 1520, 32 bits, windows vista with SP1 & SP2, CPU 2 GHz, 1 GB of RAM.

    Concerning

    Firoz Martin

    Hello

    1 did you change on your computer?

    2. this problem occur only while playing games?

    3. what game do you play?

    Method 1:

    I suggest you to control in safe mode and run clean boot.

    Step 1:

    Advanced, including safe mode startup options

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Step 2:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Try disable auto restart on system failure and check if you get an error

    Try last good configuration in safe mode and check.

  • Windows 7 - updates errors - Code A 80071, 91 and Code 80070643

    Windows 7 - updates errors - Code A 80071, 91 and Code 80070643

    happysail,

    see if this sugesstion can help you:

    http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windowsupdate&p=1&tid=958b1d34-138d-4cc2-880f-36cd5cbc4a79&mid=958b1d34-138d-4cc2-880f-36cd5cbc4a79>

    Please let us know if that helps.

    hope this helps, if it's waiting for more answers, please.

  • Windows Vista update error code 00000646 & dt000

    Dear Sir/Madam,

    I have a problem with windows update, when I updated windows, it says that the error code 00000646 & dt000. can anyone help my problem help me please.

    Thank you.

    * original title - Windows update 00000646 error code & dt000, how can I solve this kind of problem? Please help TI

    Dear Sir/Madam,

    I have a problem with windows update, when I updated windows, it says that the error code 00000646 & dt000. can anyone help my problem help me please.

    Thank you.

    Hey League kang

    Follow the advice of microsoft at the link below

    This problem occurs when Windows Setup encounters an error. Error code 0 x 80070646 and error code 646 are generated by Windows Installer. These generic errors indicate that Windows Installer has encountered a problem. When you encounter errors that are described in the section "Symptoms", the problem may be caused by an incorrect value in the registry.

    http://support.Microsoft.com/kb/2258121/en-us

    for all other windows updates to repost questions in the forum updated windows OK

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    Walter, the time zone traveller

  • After reisntalling windows xp pro no code generated to activate windows

    I reinstalled windows xp professional due to a computer failure, but now I can not activate because the identification number of the installation is not generated to call on the phone to activate windows.  How can I active windows xp because the code does not generate?

    How to contact a Microsoft Product Activation Center:
    http://support.Microsoft.com/default.aspx/KB/950929/en=us

    Microsoft Activation centers worldwide telephone numbers:
    http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
    (This site is for activating Volume License, but if you call, they will help you)

    The phone number is not working:
    Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

    J W Stuart: http://www.pagestart.com

  • Impossible to update windows xp, 0x80440A error code

    I could not update windows xp, 0x80440A error code

    0 x 80240036 and 0x8024400A

    You must be at Service Pack 3 level before you can use Windows updates.

    To determine which service pack is currently installed on your computer, follow these steps:

    1. Click Startand then click run.
    2. Copy and paste, or type the following command, and then click OK:

    winver

    A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

    See also: http://support.microsoft.com/kb/2497281
    You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

    If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389

    SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
    (for single PCs too)

    For Windows XP Service Pack 2 installation procedure
    http://support.Microsoft.com/kb/875364

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    It is stated in "How to obtain the latest service pack XP" is.

    If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

    Download the Windows XP Service Pack 3 package now

Maybe you are looking for

  • Dialup modem satellite A30-203 questions

    I have a 203 SA30 about 3½ years on which the built in V90 modem failed 2 years ago. I use it now and again for internet dial-up when I go to the USA on vacation and since then, I have been using a PCMCIA modem. I tried some of the solutions previous

  • I cannot attach a file in an email, what I've done before.

    I've always been able to reach a simple word document and now I can't. The cursor does not turn by hand on "send a file".

  • Tecra M5: Questions of Protector Suite

    Hello: I installed my protector following the version 5.4.0.It was working perfectly before the upgrade. I'm running a Tecra M5 with XP.Now when I sign on an application with it, the first field is filled just in all areas in demand no matter what I

  • How to get an English manual for Qosmio F20?

    Hello I just purchased a Qosmio F20 in Spain, and I'm fighting with Spanish Windows and manual Spanish.Is there a manual online or a way to get an English? Stuff like using the DVD burner and get the TV put in place is difficult in a foreign language

  • Vista SP1 only installs

    Hello, I had to reinstall the operating system on the pc but vista sp1 install it though windows update says it is successfully installed.  When restarting pc W watch update ready to be installed, sp1 1 update! and round it will show once again insta