STOPED PRINTING ON HP PSC 2410

Similar Questions

• How to install a scanner HP psc 2410 Photosmart all-in-one without a disc, please?

  The printer works fine but the scanner does not appear to be connected.

  Hello

  http://h10025.www1.HP.com/ewfrf/wc/product?product=303753&LC=en&cc=us&DLC=en&submit.y=4&submit.x=6&lang=en&cc=us

  the above link has information on your printer model HP psc 2410 Photosmart

  not to mention that other information to download from the link above and read the manual for it

  " How Improve your performance of product´s with details on how to use and maintain.

  Solve a problem

  Having a problem with your product? Find your solution here
   

  ' Manuals Download your product documentation and user guides

• PSC 2410 printer problem

  Try to get the PSC 2410 all in 1 printer at work.  It shows flashing 'on' light, animated hourglass icon on the screen, makes noises as if I try to print whenever I turn it on, but does not pull paper.  Sounds stop after 1-2 minutes, but printer remains inadmissible.  This seems to have originated when I accidentally disconnected the USB port while trying to remove a paper jam.  Have tried all the diagnostics, reset the machine by the orientation of the Web site, but no luck.  Goes into the same mode every time I start her if connected to the PC or not.

  I fear that once that happens there is little you can do. The printer had a fatal mistake in the firmware probably due to missed communication, you have described. The only way to try to resolve the problem of the firmware is to do a hard reset. It is not guaranteed to work, but it's the only thing you can try, unfortunately. I've included the steps below. If this does not work, you will need to replace the printer.
  
  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• HP PSC 2410 Photosmart all-in-one printer SLOW printing

  All of a sudden my HP PSC 2410 Photosmart all-in-one printer has started printing very, very, very slowly. If at all. It took almost 30 minutes (1/2 hour) to print only 1 page word document. I am on Windows 7 OS.

  Dialogue problems says everything is fine. An attempt to print a test page was even worse. He printed only the top 1/4 of the race and that it was illegible.

  I ran CrapCleaner, Norton full scan and I was able to print for about a day before the problem returns.

  Help!

  Hey Rainbow7000,

  I also had problems with copy. I noticed that the missing parts were color text or photos. There was no indication that the Tricolor cartridge was low or empty, but I replaced it in any case and VOILA... print is returned to normal and fine everyting.

  I would have thought there would be some am indicator when the cartridge is low, but it was not.

  Thanks anyway.

  RenardB

• Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

  While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

  Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

  Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

  Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

• Code internet printing HP PSC 2410

  HP PSC 2410 all-in-one

  XP Pro & XP Home - (2 lapstop - same problem with this printer)

  No changes have been made to the XP Home, just installed this printer on the XP Pro laptop and it's printing code.

  Hello

  I see you are having a printing problem of IE. I suggest you to reset the settings of the browser.

  Reset Internet Explorer default settings

  1. open Internet Explorer

  2. click on tools

  3. click on Internet Options

  4. click on the Advanced tab

  5 locate the section reset Internet Explorer settings

  6. click on the reset button

  7. click on Ok

  8. restart Internet Explorer

  Try to print again.  If it prints normally let us know.

• Failed to get printer hp psc 2410 photosmart all-in-one to print in color

  I have a hp PSC 2410 photosmart all-in-one printer. I use it on a system windows xp, 32 bit.

  I went to make a copy in color on the printer and it gave an error on the black cartridge by saying that she does not recognize.  Had not changed or replaced the cartridges they were half full.  I tried to go out and reinsert the cartridge, but it did not work.

  I replaced it with a new one.  Error disappeared, but it now only prints in black and prints any color at all.

  Replaced the (full) cartridges with new ones, aligned and clean the printer started it twice, without change.

  Close the pritnter and computer, did it again, same results.

  Uninstalled and installed printer and software, same result.

  What could have happened?  Behaves as if it doesn't have a color cartridge.

  Here is a document for your printer who carry on Matt, missing or faded colours. This document starts and you then click on other links to documents based on your results from the troubleshooting performed. Stay with him and he will lead you to how to clean contacts and how to read the diagnostic report, once it prints.  I think that some steps are buried, so here a link to assess the self-test. Finally, here's a direct link to fix bad test models in the self-test report. I hope this helps. http://support.HP.com/us-en/document/c00048685

• HP psc 2410 photosmart all in one series, all of a sudden takes an hour to photocopy or print a page...

  HP psc 2000 series, model 2410 photo smart all-in-one series. Windows 7 operating system. Suddenly takes an hour for photocopying or printing. no error message. Transport print access door may have been opened during a previous print session. Power unit failure and restart and remove and reinsert the cartridges has no effect.

  This is caused by the failure of one of your cartridges. I don't remember if the PSC 2410 will support printing (do not copy) with a cartridge removed in reserve mode, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• PSC 2410 photosmart does not print after installation of OX 10.6 & Lion: message "failure to communicate".

  I just installed Snow Leopard and Lion (10.7.2).

  My hp psc 2410 photosmart printer repeatedly gives me the following message in the queue of the printer:

  Failure to communicate: the computer is no longer able to communicate with your printer. Turn off the printer, check your printer connections and look for errors in the printer and turn on the printer.

  I have deleted all the files of hp of the system library (suggested in an Apple forum), ran from the Apple software updates and recreated the printer queue in the printer preferences and Scan.

  What to do before having to run out and get another printer? Everything that I am interested is in the printing industry;

  analysis on this hp didn't happen for several OS updates.

  I appreciate the help.

  Hi again,

  I'm sorry to hear that the problem persists.

  Please, check the following:

  1. The printer is connected directly to a free port on your Mac OS and not via a Usb hub, extention, a port of Mac keyboard or through any airport base?
  2. Make sure that the cable is not more than 2-3 meters of length and directly connected to the Mac as described above.
  3. Try to switch to a different USB port on your Mac.

  If the problem continues without change, I suggest you try using another USB cable and then check for any progress.

  Although the printer worked fine with the previous Mac OS (as far as I can understand your description), any defective USB may react differently on another OS...

  Please let me know any progress,

  Shlomi

• on the use of the printer HP psc 2410 photosmart problem and how tackle his problem.

  I refer to the last printer I bought - the HP psc 2410 all in one Photosmart model

  For the collar of the sixth month, the printer worked fine. But just recently, this printer has started quite annoying: once the printer has been started, the hourglass didn't stop and noice

  not moving part was also quite annoying:

  I had done in different ways, but it could only worked once. But whenever I'm past printer off and restarted the machine, the same error occurred.

  1. I have reinstall the printer driver, swap the USB port - worked once, but fail after I restart the printer

  2. make my computer from Windows Vista system recovery.  It has not yet.

  3. I turned off the main Reuther and modem also power on the computer and restart the power.  It worked once, but the next morning, I again, she didn't.

  4. later approach, I did: I let printer to launch everything first, now it works. But I'm really scared to turn off, I don't know if the same defective would return.

  The printer is in Malaysia. Previously, when devices HP Singapore or even China, there was no this problem. Hope that all users able to

  help or better is for the company to respond to my problem.

  Please see my post about it.

• HP PSC 2410-how to find the number of pages

  I bought a PSC 2410 opportunity and would like to know the total number of pages. Any ideas?

  Hi @jay2769,

  Thank you for your super fast response. Please see these links and print a self test page and check if it displays the number of pages in the printer.

  Link 1: http://support.hp.com/us-en/product/HP-PSC-2400-Photosmart-All-in-One-Printer-series/303752/model/303754/document/c00048606

  Link 2: http://support.hp.com/us-en/product/HP-PSC-2400-Photosmart-All-in-One-Printer-series/303752/model/303754/document/c00048607

  Link 3: http://support.hp.com/us-en/product/HP-PSC-2400-Photosmart-All-in-One-Printer-series/303752/model/303754/document/c02073861/

  As part of the Toolbox (link 3) under one of the tabs, you may find the number of pages for the printer.

  Please let me know how it goes.  To simply say thank you, for my efforts to help, please click the "Thumbs Up" button. If you need more assistance let me know and I will gladly do whatever I can to help. If it helps, please mark it as "acceptable Solution" as well.

  Please take care and have a nice week ahead.

• Unit Auto-duplex of PSC 2410 Photosmart all-in-one

  I bought a new computer that uses 7 (64 bit) of Windows operating system. I have attached a PSC 2410 Photosmart all-in-one printer. The auto-duplex feature is no longer available, manual duplex printing is available. When this printer was attached to the previous auto-duplex printer unit funtioned perfectly. Only change was to the old unattach & reattach again.

  This problem can be resolved or do I use the manual funtion?

  The duplexer must be activated as described in the "Vista/Wixndows 7 Duplex Printing Troubleshooting Guide".

• PSC 2410 - How do I clear the fax report

  I have a HP PSC 2410 printer all-in-one.  I can not find how do I clear the fax report.  Thanks in advance.

  The method described by HP worked.  Restore to factory default.

• Scanning documents PSC 2410 in Windows 7

  I have a psc 2410 and xp analysis feature was great.  I have a new computer with Windows 7 and the only options for the type of file when parsing are all related images.  I want just to scan documents in pdf or any other document file.  Is it possible to do?

  Yes, a laser printer is more economical in the long run if you run a business and make a lot of black and white printing.  Color LaserJet printers are economically about the same as your standard printer injet and printed images tend to have a quality of shinny, even on printed shadows.  If you use more for home use, I would stick with the lines of ink jet.  With the lines of inkjet you have two choices for quality, either a DeskJet, PhotoSmart an or an OfficeJet.  The PhotoSmarts are the best for printing and scanning of the images of high quality, low odds are they have traditional fax and they use more ink to print documents than other inkjet printers.  The line OfficeJet has traditional Fax and is more economical on ink usage, but he cannot match analysis and print quality the PhotoSmart line has.  DeskJet printers are printers economy.  They have the lowest initial cost, but offer the least amount of feartures.  It is ultimately your choice, depending on what you want more, economy and quality.  I've included links to the 4 different printers which I think would be good for you.  Look at them and compare the features.  One of them must be exactly what need you.

  PhotoSmart 7510

  OfficeJet 6700 Premium

  LaserJet Pro CM1415fnw

  DeskJet 3520

• HP psc 2410 photosmart all-in-in-one analysis options are not defined

  Hello

  I have a PSC 2410 photosmart all-in-one printer and have just changed my desktop (Win 7), I can print ok but when I press the button of san, it says "scanning options are not put install or run device software. The problem is I lost the installation CD and want to know if I can download it from the HP website.?

  Thank you

  Kini1108

  Try here to download your essential software

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=303753