Stopped my Norton Ghost and Norton checked my computer and found that my Vista Premium do not have or plug and play services event log

Similar Questions

• How to stop disk check to run every time that windows vista starts?

  How to stop disk check to run every time that windows vista starts? I had a problem with one of my backup disks so I removed it, but now the drive is still running a disk check whenever I boot my system. It takes so long to run and there is no error, but it starts every time. Why and how can I make sure that she? I read similar questions, but they don't tell you how to run a disk check, they mention however that "If you want to cancel the regular disk for some reason check, check out this guide." but tell you what guide or link?

  Hello

  This tells you how to enable and disable it:

  How to difficulty Chkdsk will not run at startup in Vista
  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  Video: Stop Check Disk from constantly running at startup in Windows Vista
  http://blogs.TechRepublic.com.com/itdojo/?p=193

  ChkDsk runs every time Windows starts.
  http://www.WinVistaClub.com/T20.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• restart Windows, because the plug-and-play service ended unexpectedly

  Windows restart because the plug-and-play service terminated unexpectedly. After that this mesege pc stops.

  Hello

  Check what is causing the problem by following the steps in this link: support.microsoft.com/kb/929135

  Perform the online scan if the problem persists: http://onecare.live.com/site/en-us/default.htm

  James

• 1 error windows must now restart because the plug-and-play service taken end unexpectedly__error 2 - windows must now restart because the DCOM Server process Launcher service put end unexpectedly__

  1 error windows must now restart because the plug-and-play service terminated unexpectedly
  error 2 - windows must now restart because the DCOM server process Launcher service terminated unexpectedly
  -every half an hour or 45 minutes such error comes and restarting the laptop... How to solve this problem...

  Hi nevil.fidelis,
   
   
  This seems to be a common problem, I recommend you to follow the discussions below and check if it helps.

  You can follow the procedure posted by Bindu RMicrosoft support, Moderator on Sunday, 24 January 2010, at 20:04.
  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/ea20a793-5fe8-4448-9fa2-c3ef45069b87

  For additional help please refer to the following thread also:
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

  You can also check the positions of the TCD in the thread below on
  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/0f1a049c-4852-4321-91d7-dc1255f4d7a4
   
  Consider the response posted by Karena R, Moderator Thursday, December 31, 2009 at 01:28
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.

  Original title: problem e mail

  I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.

  Suggestions;

  1. make sure that your e-mail program is your default program.

  2. make sure that your Internet Explorer, or your main browser has all its faults.

  You can do both of the above by following these steps...

  Start button > right column, click default programs > click Set Your Default programs...

  1. click on your e-mail program > it doesn't say "this program has all its defaults"?
  If not, click on choose by default for this program > check all boxes below the list > click on save when finished.

  2 do the same as above for your Internet Explorer, or your main browser.

• Cant't save and clear the event logs to a folder on the hard disk

  I have a new hp laptop under windows7. When I try to erase and save the event logs to a folder on the hard drive, I get a message saying that it cannot save the file to the network location despite the fact that I'm not saving to a network location.  I can record the events first and then to clear the logs.  But can not use the option "save and clear."  What could cause this problem?

  Hello

  1 when was the last time save and clear option has worked?
  2 have you made any changes to the computer before the show?

  Run the System File Checker and check if it helps.

  Follow the steps in this link: http://support.microsoft.com/kb/929833

• Message-"plug-and-play service terminated unexpectedly and needs to close."

  HP laptop, vista, 3 GB of memory, a lot of free space on the disk.  Reading random and unannounced and Possible associated with gaming service failures, Service pack 2 installation fails on the first blue screen "do not shut off...» "98%, seems eventually to restore.  No other obvious symptoms except card ethernet does not start after failure of service pack not installed (code 10).  This seems to be a sick puppy.  A swept of malware. running events logs current Norton Internet Security 2010, for the most part clean.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Backup on an external hard drive, the error code 0 x 81000019 a snapshot could not be created. Pls chk "vss" and "spp" application event logs.

  A snapshot could not be created. Please check the spp and 'vss' ' applications for more information event logs.

  Details: Insufficient storage available to create the shadow copy storage file or other shadow copy data. Error code 0 x 81000019.

  The size of the external drive is free to Go 465,65 Go 465,75. Also "size of the backups is not available" is displayed under the size of the disk in GB. The size of the backup copy is 57 GB.

  Event logs see the backup error event ID 521

  GENRAL:
  Save the operation which started at 2010-03-11 T 13: 41:53 failed because the service operation volume shadow copy to create a shadow copy of the volume during backup failed with the error code 2155348249.

  Details:
  + System
  -event data
  backup time 2010-03 - 11 t 13: 41:53.466000000Z
  Error code 2155348249
  Error Mssg % 2155348249

  Hi Gilles Pelletier,.

  1. check the shadow copy Volume service in the services window. Use the following steps to check:

  i. click on start and type services.msc in the search box

  II. the search for the shadow copy Volume service

  Please let us know the status and startup type. Make sure that the startup type is automatic

  Steps to set the auto services

  i. search for the service

  II. right-click on the service

  III. If the service is stopped and then starts the service

  IV. Select Properties

  v. and in startup type, select automatic

  2 disable the firewall / anti-virus temporarily installed on your computer and then check if the problem still persists. If the problem is resolved, you will need to uninstall the software and reinstall it back or change the settings and check.

  3. even check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Check this link which has the similar problem: http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/9b18bc73-26e5-4b28-819f-11628ebbf5e2

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Launcher service DCOM server process ended in unexpectedly or Plug and Play service ended unexpectedly

  I get the same exact error messages, they began yesterday and my laptop is close and restart on every 20 minutes with error message appearing before having disconnected. I've tried everything that microsoft offer and still the error message appears, one got a help or advise, help please its makes me the walls of the

  Hi Williams,

  Are a. When you facing this problem?

  B. recent changes made on the computer?

  Let us try the following methods.

  Method 1

  Do a virus scan online on your computer. You can do a scan of PC security by clicking on the link http://onecare.live.com/site/en-us/default.htm and clicking on the analysis of a complete Service and accept the contract of

  Method 2

  Perform a system restore. http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 3

  Try to check if the DCOM Server process Launcher service is running on the computer.

  You must be logged on as administrator to perform these steps.

  1. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3 right-click the DCOM Server process Launcher service and then click Properties.
  4. on the general tab, next to startup type, make sure that automatic is selected.
  5. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  If fails it step above, I suggest you check the event viewer to determine the cause and after return with accuracy of event viewer.

  1 open Event Viewer by clicking the Startbutton, click Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click eventViewer . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. click on the event log in the left pane.
  3. double-click on an event to view the details of the event.

  What are the information in event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
  Reference:
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Installing not KB2288608 and 2509461 KB event log reports.

  I get errors on my event log saying that the updates above is not installing on my computer.  Is there a way to remove the facility?

  You should be able to them with the right button in the Microsoft Update window and choose "Hide".  Are these two updates for Office XP, which indicates that does not completely uninstall all Office XP when you upgraded to Office 2003.

• "Windows Installer has stopped working". After going to 'manage' under 'computer', I find that windows install is missing from the directory 'services '.

  I managed to solve the problem by doing something with my registry. Now after a week his new broke and I don't remember how I fixed it. I am running windows vista ultimate. I discovered that it was broken again by trying to download java. HALP.

  I rebooted my computer in any way, and nothing has worked. However, it seems even e-mail links have stoped working.

  I can only suggest that you back up all your personal files and folders you want to keep in a flash drive or an external hard drive, then...

  1. If your computer comes with a Vista installation DVD, you can use it to perform a repair installation.

  Repair for Vista installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
  If you do not, find a friend who has a. Make sure it has the same version of bits as yours.

  2. If you have a set of recovery disks created at the time you purchased your computer, use and restore your computer to 'presets' (as the first is out of the box)

  If you do not have a set of facts, contact the manufacturer of your computer, ask a set of recovery disks. The cost is very low and it is well worth the expense.
  In the same Helena ask to speak to a technician. Ask the person to teach you how to access your recovery partition (if you have one) and how to use it to restore your system.

  The recovery partition was the installation by the manufacturer of your computer. They know exactly how to use it.

  With my limited knowledge, that's all I can help you.

  ........................................................................................

  Someones with a better knowledge of the computer may have better ideas to solve your problem.
  Please wait for another entry of others.

• After the exit to stop his specific image and Play (curriculum vitae)

  Hi, I have a Flash project

  I made a button ON / OFF for a sound background music and use these script:

  var my_sound:SoundId = new SoundId();

  var my_channel:SoundChannel = new SoundChannel();

  my_channel = my_sound.play ();

  my_channel.addEventListener (Event.SOUND_COMPLETE, introloop);

  function introloop(e:Event):void {}

  my_channel = my_sound.play (0, 9999);

  }

  stop_btn.addEventListener (MouseEvent.CLICK, stopSound);

  function stopSound(event:MouseEvent):void {}

  my_channel. Stop();

  Stop (2);

  }

  now I have the frame I have component Flv (mp4 video) on this subject and I have a button on my first framework to achieve this image, I want when I Go to FLV sound melted framework background on or off service and when I get out of this frame, the background again melted in or ON (best resume my sound)

  no idea how to do? !   specially to play sounds again after release Flv image?

  Thank you...

  Just use the same play and stop commands in some functions get used for outgoing and incoming in flv.

• my windows vista OS does not have the windows fax and scan program

  It does not seem that I have the fax of the window and he analyzes the program on my OS (Vista);

  Hello

  Vista home versions have included fax software

  for this you need business or ultimate or business

  you need 3rd party fax software if you have Vista Edition Home Basic or home premium

  try to snappy fax:

  http://www.SnapFiles.com/get/snappyfax.html

• Intel ProSet/Wireless Services event log has stopped working

  I get this message at the start and ran the diagnostics and the hardware failure for the Intel PROSet / Wireless. Help! Thank you

  Hello amaas1982,

  You can try to reinstall the software for the Intel PROSet / Wireless and see if that will help the issue.
  Download from the link here. You can also update all drivers and see if that helps.

  If you're still having problems, then after, I suggest that contact manaufacter for support.
  Click here to post your question in the Intel community forums.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Need to uninstall Windows 7 and go back to Vista, but do not have the cd

  I need unstall wendows 7 for vista

  * original title - need to uninstall do not have win 7 install vista cd *.

  How to uninstall Windows 7

  Carey Frisch