Stopped Printer Status window Interface - work

Similar Questions

• Printer status window interface stopped working

  I'm unable to print information from my pc because I get a message saying, "the printer status window interface stopped working.  -What it means and how to fix it?

  Hi Doris,

  1. What is the brand and model of your printer?

  2. remember you make recent changes made to the computer that could have caused this problem?

  3. how you have connected the printer to the computer?

  Try to run the printer Troubleshooter.

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

• The printing status window interface stopped working

  After loading MS SP 2 for Vista, my laptop has stopped working due to a registry error (my best guess). With the help of a the manufacturer Gateway, laptop computer recovery disk works.  Reinstalled the desktop drivers and Dell AIO printer 960 & utilities, but cannot print because of "the printing status window interface has stopped working".  How can I fix it?

  Hi Tammy,

  I suggest you try the following steps:

  Step 1: Run the Fixit available in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

   

  Check whether the problem is resolved

   

  Step 2: Make sure that the printer is set as default.

  1. on the Windows taskbar, click the Start button, select Control Panel, and then click Printers. The Printers folder opens.

  2. look for a green checkmark beside your printer (Dell A960 printer). This check box indicates which product is the default printer for Windows.

  Also, make sure that the printer is not paused or offline.

  1. on the bar menu print queue, click on the printerand then locate suspend printing and printer use offline items in the menu.

  2. ensure that there is no check box next to each item. If a check mark appears next to each item, click to clear it.

  Change-your-printer default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer

  If the problem persists,

  Step 3: Download and install the latest drivers for printer from DELL website, click here for drivers

   

  For more information, see the links below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

   

  You can check with DELL to known problems

  http://support.Dell.com/support/index.aspx?c=us&l=en&s=Gen& ~ CK = mn

   

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The printer status window Interface stopped working and was closed. How can I fix it?

  When I try to print I get the following message from Microsoft Windows: Printer Status window Interface stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  I have never received a Windows solution.  Once I have selected an email or other document to print and then click on print, nothing happens.  I then log out of windows and then reopen in an and the document will be printed.

  How can this problem be fixed?

  Hi all!

  This is usually resolved with a driver updated from the manufacturer.
  I highly recommend updating the driver to see if that takes care of the issue. If you need help, find the driver for your printer, please provide the make and model and I will do my best to find the right one for you.
  Thank you for using Microsoft Answers!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printing status window Interface has stopped working

  I have a new computer with Windows 8 and an old printer Dell720.  I found a driver and the printer works with the new computer.  The printer was working without any problems, when I received the message "the Print status window Interface has stopped working".  I also had a "Low Ink" pop-up window.

  Any help to solve this problem would be appreciated.

  OK, I found a way to deal with my problem.  Apparently the problem centered around the printer sends a message to the computer that the ink cartridge is low on ink.  I said to the computer I installed a new print cartridge (but I do not actually have) and now the printer works.

• Printer Status window Interface has stopped__

  Printer Status window interface stopped working

  Print sometimes and then stops.  I unplugged, rebooted and then it works?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  Try to uninstall/reinstall the printer.

  And make sure you have the latest printer drivers downloaded from the printer manufacturer's Web site, not from Windows Update.

  See you soon.

  Mick Murphy - Microsoft partner

• Printing status windows interface has stopped working

  Original title: what to do when I try to print a statement and get a message {windows printer interface status stopped working]
  The document is through Adobe reader

  Hello

  1. what operating system you are using on the computer?
  2. What is the brand and model of the computer?
  3. not the problem only occurs when you try to print the document using adobe reader software?

  
  Method 1:
  You can try the procedure described in the link and check if it helps:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 2:
  You can also see the following article from Adobe to solve the problems on the issue.
  Resolve PDF printing problems. Acrobat, Reader
  http://kb2.Adobe.com/CPS/873/cpsid_87346.html
  
  Alternatively, you can contact adobe about this issue.
  http://forums.Adobe.com/community/adobe_reader_forums

• The job status window interface stopped working Dell AIO printer 968

  I bought a new computer with window 8, native. "Each connection with my previous devices ran quite well when it is installed automatically, except for AIO printer 968 Dell, I have installed a new driver from Dell, more precisely prescriptions Scanner is pritnting OK when I get this message" Job status etc.. "I have to accept twice this window to find a solution otherwise everything is blocked, then it starts to print, but it only prints what is like html text and not clear. How can I get normal printing without this message "State of work etc." and with all the text

  Rick

  What you are proposing, it's just what Dell US suggests on its website.

  I tried and it doesn't work.

  I tried once more and still the same message: employment status etc.

  Hope that dell wil solve his problem before buying one new another brand

  THA, ks, greetings and a happy new year

• PSC 2115 all-in-one has stopped printing under Windows 7 64-bit.

  Faced with the driver for PSC2115 which stopped working under Windows 7 64-bit. Problem is that this printer is old, but still in excellent condition and prints of cracking.

  Used the HP trobleshooters to exhaustion. It shows that the printer is ready, but prints just stuck in the print queue and outputs nothing.

  The message of the alignment of the cartridge is also high at all times, but it do not line up when you press on enter.

  Hi G-Force,

  Here is a link to an excellent tool that can help narrow down and solve your problem:

  HP Print and Scan Doctor

• HP8620: Printer offline, Windows 10, worked fine until a few days ago

  I have a wired network printer, HP8620.  In the last few days, every time I turn on my laptop (HP spectrum), also connected by wire to the network printer is offline - it will not be printed.

  Reports HP print and utility Scan doctor that the printer is offline, but Microsoft Word and other applications do not, print saying the printer is offline. I can solve the problem by turning the printer off and on again.

  I've seen suggestions that it is a problem of SNMP status, but when I go to the printer properties, Ports and select "Configure Port", I get an error message "an error occurred during port configuration", "this operation is not supported", so I can't uncheck SNMP, as suggested elsewhere.  Any ideas?

  Thank you

  Philippe

  Hi @Philip4,

  Welcome to the community of HP.

  I read your post on your HP Officejet Pro 8620 having connection problems, and I want to help out you.

  Try the link below, there are several possible solutions to your problem. Try all the steps in order and let me know the results as well as of the problems or the error codes you are experiencing.

  HP printers - printer 'offline' status message (Windows 10)

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• PSC 2355 all in one printing stopped after upgrade windows 8.1 scan is OK.

  I have a HP psc2355 printer worked happliy in window 8. I downloaded and installed windows store 8.1 and the printer no longer works!

  With the printer Open (via Control Panel) status window, the details of the document briefly appear when you click the button print. Nothing happens at the end of the printer. Theres nothing wrong with the printer as I can use it on another PC without problem.

  I uninstalled and reinstalled the printer using hppiw 2012-10-31 and the HP print and Scan Doctor V 4.1.0.29 which gives an error in device "your printer is in a busy state" after an attempt is made to print from applications or properties of the printer/print test page.

  that self-test prints OK.

  Scanner works OK

  Printer is connected via rirectly USB cable to the USB port on the PC

  Windows Update ran this morning

  3 hours lost so far!

  SOLVED * printer properties Advanced tab Print Processor change Print Processor to winprint hpzpplhn settings check the default data type is RAW print OK now HP has gotten support jobs going?

• Photosmart 7520: Printer Wizard does not work on Windows 10

  My PC has recently upgraded Windows 10.  I am now having a problem with the Printer Wizard.

  Previously, I had the status display, the ink levels, scan document, check printer heads, etc.

  Now all I get is a printer configuration screen that has 3 options

  -connect a new printer,

  -convert a USB printer wireless, and

  -Add new software.

  How can I get the correct printer assistant screen to run?

  Thank you.

  Hi @AJA3,

  Thanks for joining the Forums of HP Support for a solution to your problem of HP printer Assistant.

  I understand that you use a HP Photosmart 7520 e-all-in-one printer with a computer who has recently upgraded Windows 10 and now, when you click on the printer icon to open the HP printer Assistant you get the "connect a new printer"window. " I would like to help with that.

  It is not that the HP printer Assistant does not work, but probably the printer probable network needs to be reinstalled.

  I would like to start by uninstalling all software that was installed before the upgrade to Windows 10 relating to printers. Here is a support document which can help needed - uninstalling the software of the printer (Windows).

  If you get prompted to restart the computer when uninstalling, go ahead and do the restart. If this isn't the case, restart the computer after the uninstall is complete.

  Once the computer is ready, try to use the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years

  My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years - any changes made on the network wireless to our knowledge.  Printer works fine in USB mode on old Windows 2000 office.  Network sees the devive asked to detect devices.  Wireless to the printer hardware is perhaps not handshaking...?  Please let know us that he is a very curious pnnc.

  Windows 7 is updated as well as the print driver.  Thank you.

  Hello abir.

  Thank you for giving us the opportunity to help you with your concern for Windows.

  From your post, it seems that you cannot print from Windows 7-based computer.

  When you say "no changes made on the network wireless to our knowledge", which is the type of network you're talking about? (Workgroup, domain)

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  We will try the steps from the following link and check if this solves the problem.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  You can also check this link:

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Response with the State of the question, too, let us know if you need help with Windows problems and we will be happy to help you.

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.