stopped working after upgrade

Similar Questions

• SD card slot stop working after upgrade a1 - 830 kitkat

  Hello

  After update of the a1-830 (Spain), SD card stopped working. As I said in another thread, it may be a coincidence if, in addition, there is no other reason why (no water, no drops, no high temperatures...).

  Checked the sd card in other devices - works OK

  checked other maps sd in the 830 - nothing has worked

  reset to factory settings - nothing, no error messages...

  My question is, is there some newspapers, dump, something where I can search for messages in error, to find if the problem is actually related to the upgrade?

  Thanks in advance

  Yes, I tried but nothing happened... until apply the latest patch, then the SD card is recognized, assembled and disassembled every second and valid ramdomly saying that the card does not have a file system.

  I'll try an another factory reset and if after that always have the same problem, will finally I bought at the store.

  I'm going to mark it as resolved, I think that this has nothing to do with the update of kitkat

  Thank you all for your answers

  Now, waiting for news about an update of the lollipop...

• Logitech Headset H330 with Mic stopped working after upgrade to SP3 of XP Professional

  While in SP2, all worked, but once the system to update to SP3, the game has stopped working.

  Any help would be appreciated.

  I had the same problem after buying the Logitech H330 Mic headset and use Windows XP with SP3.

  -Solution (at least for me):

  * Go to C:\WINDOWS\inf

  To find the WDMA_USB file. BAK

  * Rename this file WDMA_USB.inf

  * Use the Windows Update Wizard (from Device Manager', select the 'Logitech USB Headset"(with yellow exclamation mark), right click and select 'Update driver...) »)

  * Specify C:\WINDOWS\inf as a location to search for the driver

  * If you are lucky (I was / am!), Windows XP with SP3 will install the "Logitech USB Headset" as USB-audiodevice and you can select (and - finally - use) as audiodevice!

  -Credits and thanks to 'Anonymous' on http://www.mycreativefansite.com/2007/06/solution-cannot-install-this-hardware.html on May 31, 2010 17:36

• Windows Explorer stops working after upgrade to sp2 for newly created folders

  Recently upgraded to Windows Vista SP2. Any new cause of file created Windows Explorer to display error message "Windows Explorer has stopped working" dialog when you try to look at the files in a directory listing.

  Here is an article on the limits that can help you to file naming: http://vlaurie.com/computers2/Articles/filenames.htm.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Lightroom 6 stopped working after upgrading windows 10

  Hello

  My LR6 will not launch after the Windows 10 major update last week.

  I get this Windows dialog, superimposed on the LR start page;

  Adobe Photoshop Lightroom has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I have no option at this stage, except Lightroom closure.
  

  I rebooted several times (it seemed the same problem three times after the previous updates of small windows) and also reinstalled Lightroom twice, to no effect. When I start a reinstallation I am informed that there may be a problem because the installer has detected that a reboot may be waiting. If I stop and restart I get the same message again when you try the reinstall.

  Has anyone else had similar problems?

  Thank you

  Hi alanw,.

  Please see this thread CC Lightroom freezes when develop mode and manually disable the use of the GPU in Lightroom

  Let us know if that helps.

  Kind regards

  Assani

• Phone stopped working after upgrading to iOS 9.2

  I have updated to iOS 9.2 and my phone (5 s) has stopped working.

  do not send text messages or save and none of the applications to work.

  I do not have a PC at the moment so I can't use iTunes

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Boot Camp has stopped working after upgrade to Yosemite

  Hi all

  I also lost Boot Camp after upgrade to Yosemite. I tried to recover by following the instructions on this forum but did not.

  Issues related to the:

  1. can I get it back? See some of the data below.

  2. otherwise, I can create a new training camp after the recovery of wasted space?

  3 is it better to first upgrade to El Capitan?

  Thank you in advance!

  ➜ ~ diskutil list

  / dev/disk0

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB 950,5 disk0s2

  3: disk0s3 Apple_Boot Recovery HD 784.2 MB

  4: Microsoft database 32.0 GB disk0s4

  / dev/disk1

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS BrontoSSD * GB 950,1 disk1

  Logical volume on disk0s2

  90BC997C-0C7C-40FB-896D-973BC192A123

  Unencrypted

  ➜ ~ list cs diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 46320040-2E97-49D9-A652-87CBA72E637D

  =========================================================

  Name: BrontoSSD

  Status: online

  Dimensions: 950509715456 B (950,5 GB)

  Free space: 18956288 B (19.0 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 950509715456 B (950,5 GB)

  |

  + -> 14BD334A-53BE-4C89-949D-2E8E5EF30A59 family of Logical Volume

  ----------------------------------------------------------

  Encryption status: unlocked

  Encryption type: no

  The conversion status: NoConversion

  Direction of conversion: - none -.

  At encrypted extensions: No.

  Fully secure: No.

  Password required: No.

  |

  +--> Logical Volume 90BC997C-0C7C-40FB-896D-973BC192A123

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 950138437632 B (950,1 GB)

  Conversion progress: - none -.

  Reversible: Yes (no required decryption)

  Name: BrontoSSD

  Volume name: BrontoSSD

  Content indicator: Apple_HFS

  ➜ ~ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1856464288 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  1856873928 1531680 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  1858405608 32621336

  1891026944 62496768 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  1423 1953523712

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  ➜ ~ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AC 1023 254 63 - 1023 254 63 [409640-1856464288]

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1856873928-1531680]

  * 4:87 1023 254 63 - 1023 254 63 [1891026944-62496768] VS NTFS

  You must run Testdisk. Have what you tried so far?

• Subwoofer stops working after upgrade to windows 7. __

  After the upgrade to Windows 7 my subwoofer is no longer in effect. I tried to uninstall the driver and the re - install the latest drivers, but it does not work. Strange thing, it is that the sub will work in test phase of the program, but not in music playback. Any help would be appreciated.

  Finally figured it for people with Realtech HD audio drivers! All you do is, right-click on the volume in the taskbar.  Click playback devices. Click the speakers properties. Access improvements. Activate bass management. That's all! Alternatively click on correction of the room and set the PB to have more control.

• Speakers Logitech Z313 stopped working after upgrading to Windows 7

  I delayed upgrading to Windows 7 until after I graduated from College just for this reason. I just installed Windows 7 and my Logitech Z313 speakers that worked perfectly well in Windows XP are not recognized as material.

  There is no yellow! device drivers, I have the "High Def Audio" largest later device driver installed. Troubleshooting Windows does not detect a problem with anything. My speakers are working properly. When I disconnect or shut down the PC, I can hear the feedback and the pop Logitech has no drivers for these speakers because they must be detected automatically by the system when they are connected. I tried unplugging / plugging in different ways.

  Can anyone help?

  Thank you.

  Hello

  I quite had the same problem and found the solution: you must uninstall your device, then go to control-online Device Manager Panel => are looking for the "!" symbol on your list, then right click on 'properties' and 'details', you will see a list with weird names (ex: HDAUDIO\FUNC_01 & VEN_10EC & DEV_0662 & SUBSYS_18497662)

  Copy it and go to , paste it into the search bar, and then select your 'Windows' (for me it was 10 Win 64-bit), download the driver and install it. Fact! :-)

  Problem solved ^^ not by Microsoft or Logitech, unable to understand this problem, caused by the update of Windows 10... (-_-(

• Why siri stop working after upgrading to ios 9?

  Why siri doesn't work anymore?

  Updates can bring on all sorts of unforeseen anomalies. First of all, I recommend going through the instructions in this article that I placed down below.

  Use Siri on your iPhone, iPad or iPod touch - Apple Support

  Help with Siri

  • If "Hey Siri" does not work, make sure that "Hey Siri" is turned on under settings > general > Siri.
  • Could Siri say, "Sorry, I have problems connecting to the network", or "Try again in a few moments." It is probably a problem with the network. Check your Internet connection and try again later.
  • When you use Siri to dictate, dictated is limited to 30 seconds.

  If Siri is not available, or do not understand or answer questions

  Before you try the following steps, make sure that your camera works with Siri. After each step, see if Siri works.

  1. Make sure that your iOS device has an Internet connection via Wi - Fi or cellular data.
  2. On your iOS device, make sure that Siri is enabled in settings > general > Siri.
  3. Restart your iPad, iPhone or iPod touch.
  4. On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.
  5. If you use an iOS device, try to use Siri with headphones. If Siri works if you are using a headset, get help with microphones on your device.
  6. Contact Apple support.

  If Siri does not make a noise when you press and hold the Home button

  On your iPad or iPod touch, Siri sounds when it's time to ask a question. If you have an iPhone with iOS 9 or later, Siri begins to vibrate in place. You will hear only the ringtone on your iPhone with iOS 9 or later, when you use headphones.

  Siri also sounds when you use "Hey Siri" on an iOS device 9.

  -- -- --

  If Siri doesn't always, use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory - Apple Support settings.

  Backup your iPhone If you have not already done so.

  The backup of your iPhone, iPad and iPod touch - Apple Support

• Printer: My Scanner stopped working after upgrade Windows 10

  Hey,.

  Finally, I upgraded my Windows 7 to 10 Windows computer and the scanner no longer works. It prints fine, but when I go to open the scanner software, it just opens and says "add a printer". Any help is greatly appreciated.

  Bill

  Well first of all, did finish just upgrade? If so, you must make sure, that you have all the updates of Windows 10 - just search for "update and recovery", and then click Windows update. Make sure that everything is up to date. You should also completely shut down the computer and restart it at least once before you start troubleshooting.

  If you have done these things, and you get the screen asking to add a printer, then the link between 10 Windows and HP full feature software (Printer Wizard) is broken. The best way to recover is to uninstall the software from programs and features and then reinstall it. Go to http://123.hp.com/us/en and look for your model of printer, download the latest version of the free full version software.

  If you need more information, see this HP support document: http://support.hp.com/us-en/document/c05212298.

  Good luck!

• Built-in mic stop working after upgrading Vista to Windows 7

  I've checked everything I can think of.  Nothing is cut.  When I go into control panel - sound - recording, there is a green check mark on the mic, but it captures all the sounds.  The microphone worked before I upgraded.  Any ideas?

  Jorjannaz wrote:

  (1) MODEL # CQ60 - 417-CA

  (2) P/N: NW158UA #ABC

  (3) the product key: {information}

  I think I got that right?

  Thank you.

  It is always helpful if you identify your OS by saying also that it is 32-bit or 64-bit.

  Here's where tit portal for your laptop support pages are.

  Go into the control panel. Select sound. Select the record. Select Configure. Select Configure microphone.  You should see what I have in the next image if all goes well at this point. If you speak into the microphone, you should see a green bar mobile.

  

  view your results.

  Best regards
  ERICO

• Audio input and output stop working after upgrade 10.2

  Phone 6 s 64Gb

  10.2 - updated iOS updated yesterday

  headphones - original Apple

  problem - when a call or receive a call cannot hear the other person, nor they can hear me.

  Bypass - Press speaker, microphone and speaker start to work, tap new pregnant and everything goes back to normal.

  happens all the time since updated!

  I had this problem too and a simple reboot fixed it for me.

• The fans are not stop working after upgrading BIOS on Satellite A200

  Hello

  IM using the Satellite A200-1bp. I recently updated my BIOS 5.20 - winner and my fans are not end all the time working.
  I think his reason is update BIOS
  I'm looking for the BIOS below.

  Please help me...

  Hello

  Maybe this thread can help http://forums.computers.toshiba-europe.com/forums//thread.jspa?messageID=128543

  Make sure that you use the right BIOS for your laptop model.

• my printer has stopped working after upgrading from XP to Vista? What should I do now? __

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: How can I remove Vista and go back to XP?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: How can I remove Vista and go back to XP?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hey Larry907

  Uninstall and reinstall the printer

  but 1st go to the website of the printer manufacturers and see if printer vista drivers are here for your printer model

  If you have vista drivers available for your printer model reinstall the printer

  If there are no vista drivers, it may be time to upgrade your printer

  consult the manufacturer of the printer

  Walter, the time zone traveller