Stops at random - memory/battery problem?

Similar Questions

• POWEREDGE 2800 memory/battery problem

  Hello

  The server DELL POWEREDGE 2800 our company with windows sbs 2003 suddeenly server has restarted yesterday and stuck in the POST gives the error"

  Memory/battery problems were detected.

  The adapter has recovered, but cached data have been lost.

  Press a key to continue. "

  I have three times restarted the server by pressing a button to continue. All three time loading of bones preserved for a long time and restarted the same screen of the error.

  ATLAST I turned off the server and checked for any loose contacts according to the suggestion of dell. I removed the disk 0, 2 HHD, HDD3 in channel one o and replugged in and started the server. Same system has occurred. 1 HARD disc is already failed in RAID 5 and the place so that the disc is empty, I suspected may be another disk HARD in the same row is a failure and so I removed HDD 0 and rebooted the server. the same symptom (2003 loaded and stuck). turned off the server ' reconnected HDD0 and removed HDD2 and restarted the server, but the same symptom.

  Reconnected the HDD 2 and disconnected HDD3 after restarting the server, it gives error loading operating system.

  There are disk HARD 4 and 5 two more hard drive HARD drive in another channel 1

  How to recover from this problem and our secure server data?

  Please help me with this because I'm helpless and the server must be brought im production tomorrow

  Thank you & best regards

  Margot

  If your LCD is blue and you get the error of memory/battery on each startup, then you need to replace memory RAID (99% chance that it is rarely a defective battery or the riser).  The operating system will not usually start in this scenario.

  If your LCD is amber and a message about the scrolling ROMB battery voltage, you should replace the RAID battery (sometimes it's because of riser).  The operating system will usually start and work very well in this scenario.

  First of all, stop playing with readers and replace the memory RAID (and battery and lift to be 100% sure).  Once it is replaced, due to all mixture player you have done, you might have a few steps very careful to recover your data and make your table online.  When you're ready to do this (again, it is useless before repairing the message memory/battery), call Dell technical support - it's always free on servers, regardless of the status of the guarantee.

• My function paste decides to stop working randomly. What could be the problem and how could solve this problem?

  My function paste decides to stop working randomly. What could be the problem and how could solve this problem?

  A repair from the Vista DVD installation.  Don't forget to have a backup/restore point just in case.

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

• TECRA 9100 battery problem

  Similar experiences to mine, please?

  After using no not my Tecra for some time (about 3 months). He was once again the charger for more than 24 hours and I'm now done with the original problem, I had the last time I used the Tecra, several months ago! The problem is, I think, only related to the tent to use it on battery, as follows:

  At the start of the machine of 'cold', after passing the request of 'password' screen, it goes straight to a "small blue screen", which includes the message:

  Hardware malfunction

  Call your provider of support material

  NMI: channel check / IOCHK

  The system stopped *.

  A little more information, I found that I can actually 'blue screen' situation - turn off not having don't no need to remove it battery that I first thought - and if I get the power cable then everything starts up well and seems to work normally. If I then remove the power cable (leaving the laundry to run on battery only) the small blue screen and same message reappears.

  Yet once which seems to indicate a battery problem, I guess?

  Has anyone else had a similar experience?

  Post edited by: Gary S Cooper

  Hello

  Windows may indicate a fundamental error messages only when material occurrence malfunction, so that the elimination of the errors can be difficult for equipment problems. Most of the problems of material step in connection with the motherboard, the main memory on a motherboard or adapter or the stamp on a motherboard or adapter.

  On this path, it is not easy to say what may be the problem. I don't know how old is the unit, but if the unit is still under warranty I advice you contact service partner chartered. I'm sure they can find what may be the cause of this problem.

  Good bye

• N100 random diferrent closing problem... RESOLVED (clik for solution)

  Hi, this is my first post...

  I bought a friend a Lenovo 3000 n100 0768-6vg(made in 06/08)

  It worked fine except for the drums, which I think he's dead...

  When I connect power cord the charge led flashes red once then green and stays like that for about 4-5 seconds... sometimes after a few minutes it starts to blink red as he is in charge, but he died iven after 20 minutes...

  in any case I don't mind the battery problem... the main thing as it sounds...

  I started the leptop and worked verry well, answered all the functions but I disliked the windows install so I installed a new copy then the problems started...

  He had originally Windows xp home edition and I wanted to install windows xp sp2, a new install...

  After installing windows, when I was a few steps to end install, the leptop suddenly shutted down

  now when I try to start windows, after 5-10 minutes it randomly stops

  Iven if I left it in bios mode it stops... I managed to get into windows and install SpeedFan to check temperatures and it is said that the cpu has aprox. 48-50 degrees celsius in normal mode...

  After a reboot I tried to stress him out and get a maximum of 60 to 65 degrees...

  I am desperate... I have tried averything... power without battery... no hard drive (with an xp live usb)...

  could someone help please?

  PS: I have experience in the repair of office but this thing is relatively new to me...

  an update of the bios could not solve my problem? : s

  I found the problem by a mistake ... .the how it happened

  I opened the leptop and close to the circuit of battery I saw something strange... I think that a liquid has managed to enter... I have only out cleanead and nothing... I removed the battery but still nothing...

  the solution I found sounds is like this:

  If you remove the battery charger wile it is still plugged, the 'bad' run will remain in the leptop through capacitors... Yes,

  Unplug the charger...

  Battery remov...

  leave it like that for 1 to 2 minutes wile pressing the power button (to drain run it), and then reconnect the charger without the battery...

  and voila, the liptop works fine without restarts and other animals

  I hope this will help others who encounter this problem... at least they can try this before taking the leptop at a service center

  Cheers!

• Tablet-Stream 7-5709: battery problems and bitlocker guest

  The product number is K4F53UA.

  The problem of the battery does not charge properly and now I'm wondering the bitlocker code whenever I have to turn off the tablet.

  When the Tablet is turned on, Windows is running and it is plugged, the tablet will not load. It never shows the compressed load and after a while, the battery will stop and the Tablet turns off. While it is turned off, plug the Tablet into causes the charge icon will blink. If the battery still has some power left in charge icon lights up for about 10 seconds, turn off for 2 seconds lights up for 10 seconds, turn off for 2 seconds and continue to do this for a while unitl it just stops. If the battery has been emptied before that happens the same thing off the power except for the icon to load time of stay is a fraction of a second.

  I went into the menu diagnostics and completed of the rapid and Extensive tests. Has been correctly executed without error, but not the case in the diagnostics menu it shows battery when it is plugged.

  I tried to put this before, but it does not show on the forum.

  When the Tablet is turned off and you first plug the charger, you should see the pictogram of loading on the screen for 10 seconds and then disappear for the rest of the time the charger is connected.  If you see something different, the Tablet may be damaged if you have checked that the charger and cable are good.

  Others here have noted the pictogram charge flashing and it turned out to be a faulty Tablet unfortunately.

• LENOVO Y510P BATTERY PROBLEM

  I bought this laptop about 2 or 3 months ago and everything went on pretty well until this battery problem has occurred. First, he got stuck on 33%. It did not matter how long I charge. It has always been 33%. Then he began to fall little by little. Now it is stuck on 29%. Do you have any suggestions? Please help me.

  have you tried that?

  -disconnect the mains supply, remove the battery - if it is not internal, press the power button / stop for 30-40 seconds and try again.

  also, try to re - install management supply (remove/reboot/reinstall computer) or reset (the second icon mini battery) battery meter

• A3000 battery problem, charges to 99%, reduced to 15 per cent in a few minutes

  Hello.

  My A3000 ZTE has a battery problem. It charges quickly (in about 10 minutes) to 99%, and then when I unplug it, it would decrease 2% per minute (while the wifi / 3 g/bluetooth/auto rotation is turned off). Then it stops at 15%. It is very annoying because it worked fine yesterday. I bought the Tablet about 2 weeks ago, and the battery life was great until today.

  What can I do?

  Thanx

  Thanks for the reply. I think I might have fixed for now.

  I did the following, and now the battery works fine again:

  First of all, I drained the battery, it took a few hours because he was stuck on 15%, but after awhile, it's just off. So I guess it was completely empty.

  Then I kept away and loaded, it is only loaded up to 99%, but this time it took a lot longer than 10 minutes, which gave me hope. I turned it on, and the battery problem had disappeared. It works perfectly now.

  Maybe these steps he has reinstalled the battery or something.

  Thank you very much

• Keyboard touch U430 stops working randomly in Windows 10

  Since I've upgraded to Windows 10, keyboard stops working randomly in different programs. For example, it might stop working in Firefox, but at the same time it would work very well in Chrome and Notepad. Or it stops working in Chrome, but works very well to edge and Firefox. Most of the time, closing and opening the progrm do nothing, only a reboot solves the problem for a while. I should also mention that, while the keyboard stops working in this particular program, the program itself is not frozen and it works fine if I use the touchpad.

  Not sure if MS or Lenovo is to blame, but Lenovo should look into it.

  Found the culprit. 16.0.0.614 Kaspersky virtual keyboard. For the disabled that and no more problems.

• Kalonline-works until I get the anti-piracy icon so stop saying: there is a problem with the function of anti-hacking

  I play kalonline (RPG game), when to start the game it works up until I get the anti-piracy icon so stop saying: there is a problem with the function of anti-hacking. the program stops. I am the admin of it say kal computer run it in administrator mode and I did and I delete and reinstall the game. Solve the problem in win 7 by a right click and run as administrator, they wanted to work in win xp it all fits on how to solve this problem. These are the things, I was told to do to fix it.
  Hello

  It comes to KalOnline.

  Your error message can be corrected by following these steps:

  1. run KalOnline in Administrator Mode.

  2 uninstall KalOnline d_lete the entire Inixsoft folder, then reinstall the game.
  I did it and and it has not worked. then I was told that this was causing the problem

  Please check your computer system.

  This problem has occurred by a kind of problem of piracy.

  And if you have used a kind of memory-editing program, it could be happen too.

  So if your receipt similar to, then please remove it.
  I have none of these things on my computer. All I know is that people who have not updated windows xp can play the game and people who win 7 can play the game if they right click icon and run as administrator, that I still say side here but no way to prove it.

  Hello

  I suggest you to get in touch with the manufacturer of games and see if there are any other fix for this problem.

• Charging battery problems!

  After Lollipo-update, my Z3C had problems with charging the battery...

  (1) phone heats up during loading

  (2) the phone stops to recharge the battery approximately 85% is charged. Orange led starts to blink... and power management is stopped too: it freezes when loading stops and battery usage meter stops to update.

  I rebooted the phone several times with no improvement fot this problem... WHO IS WRONG?

  A suggestion, re - install the last update with the CCP to iron out things.

  PC Companion (CCP)

  Bridge (for Mac)

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

• battery problem: message "consider replacing the battery.

  original title: battery problem

  Hello.

  I think I have a problem with my battery today. I bought my laptop on October 2010 and everything was OK until today: the indicator of battery on the computer screen with a blinking red and it says that I should "consider replacing the battery.
  Then, when I plug the battery on the computer, there is one other Red Cross on the battery indicator, and also said I should 'consider replacing the battery. In addition, it is written "a battery problem has been detected. Your computer may suddenly stop. However, I see that the battery is charging (the battery indicator increases).
  Finally, when I unplug the battery from the computer, after 5 minutes on all messages have gone, and everything seems completely normal.
  So, I wonder if there is a real problem, and you think that I should really change the battery soon (I would find it strange that my cell phone is almost brand new)?

  Thank you.

  Hello

  I suggest you o article below to see and check if it helps.

  What should I do if I get a notification "consider replacing your battery"?

  http://Windows.Microsoft.com/en-us/Windows7/consider-replacing-your-battery

  Also check out the article below:

  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Hope this helps

• Battery problem (fresh for a while then says: no charging current)

  I have dell inspiron n5110. I have upgraded to windows 10 pro... Everything was fine but since last week, it shows a battery problem. When I plug in the charger, the battery shows as 5-6 seconds of charging for and then it shows not charging. Again, I remove the cell phone charger and plug it in again and the same thing happens. Nothing changes on the displacement of the charger a little here and there... Only fees for 5-6 seconds when I plug works.

  When it stops to load, check the system to see if the AC adapter is not recognized (or shake gently the connector).  If the adapter displays unknown (F2 on startup to check) battery is not charging.  If the adapter is recognized, it is most likely a dead or dying battery.

• Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please. I have

  Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please.

  Troubleshooting help here > Apple Portables: Troubleshooting MagSafe adapters - Apple Support

• iPhone 4 s - battery problem

  Hello

  I have an iPhone 4S running iOS 7.1.2 who must break with the battery problem almost entirely.

  I don't know if it's a hardware problem, but I hope that it is a software problem so I will try to do everything as my possible to isolate and software problem.

  I did a reset on iOS, but it does not solve. The next step should involve a DFU reset using iTunes but it will update my iPhone to iOS 9 and as far as I know it will turn my iPhone unusable.

  The other possibility is it back to iOS 6.1.3 but it won't, I must do a restore to iOS 9 which will be a problem.

  Yes, is there something I can do without updating to iOS 9?

  What makes you think this update to iOS 9 will make useless iPhone?

  Please read here > identify your iPhone - Apple Support model

  Read also here > update the iOS on your iPhone, iPad or iPod touch - Apple Support software

  Last read here > get help with hardware on your iPhone, iPad, and iPod features touch - Apple Support