Stops on his own computer and will not boot from the CD

Similar Questions

• Windows 7 for Lenovo G50-70 - the computer will not boot from the CD

  Hello world

  I hope that someone here will be able to help

  I bought a new laptop with Windows 8.1. I want to install Windows 7 on that I know well because I can't use the new windows. I changed the settings in the BIOS to get the machine to boot from the CD, but it won't be fair. I also tried to restore the system to boot from the CD, but it installs just the Windows pre-installed, new instead. Also, I can't access the CD from the drive while all my other computers are capable of (what is strange)

  Can someone help, please?

  See you soon

  PS. : I can turn on the computer through the small "boot botton" on the side and select the DVD drive to boot from. But this is not followed by the message "Press any key to boot from CD" and the computer starts just W8 yet;

  I contacted customer service and followed your advice. They refused to help him on the ground that there nothing wrong with the machine in their opinion, and since I wanted to change operating system. All preinstalled spyprogrammes Lenovo has been erased with this downgrade. So far, I've owned a laptop computer brand new and expensive for a year I used only to waste my time, trying to make it work, that was not why I bought it in the first place. What a RIP-OFF!

• NB100 will not boot from the XP CD in the external USB CD/DVD drive

  I try to install XP Home in my NB100
  The netbook still refuses to boot from the XP CD. It's just not more
  Returns the current operating system (Ubuntu) or give the error "Could not find NTLDR" dreaded.
  And yet - it will boot from an Ubuntu Live CD disk perfectly fine, AND
  If I connect this external hard drive on my computer Windows 7, (another Toshiba
  Portable satellite) that the machine starts quite successfully since the XP CD
  in the same external drive!

  Can anyone throw any light on what is happening on Earth on?

  Hello

  There are various reasons why this error message:
  In most cases this error because the laptop is trying to boot from a HARD drive or flash drive that is not configured correctly. Maybe the drive is not bootable or not compatible.

  It would also be possible that some sectors on the HARD disk, HARD drive failures are corrupt or BIOS is damaged. NTLDR error messages may also appear if the master boot record is damaged.

  In your case I recommend that you format the first HARD drive before booting from the hard drive CD7DVD external using Win XP CD.

  By the way: you must add SATA driver to CD Win XP using nLite.
  The SATA driver is placed on the European driver Toshiba page in the Intel Storage Manager

  The SATA driver is needed to recognize the HDD by Win XP!

• Z575 will not boot from the hard drive or restore DVD

  Need help on a laptop Z575 age of 2 years that immediately after an automatic update of windows, will not start either from the hard disk or restore DVDs (blue screen). Does not start in safe mode, not booting from a rescue of third party DVD. Attempt to start, it will show you the ability to start the Startup Repair tool. Repair shows that it is unable to fix with the detail following problem error messages:
  Signature of the problem 1: 6.1.7600.16385
  Signature of problem 2: 6.1.7600.16385
  Signature of the problem 3: unknown
  Signature of the 4:21200196 problem
  Signature problem 5: auto failover
  Signature of the problem 6:7
  Signature of the 7 problem: bad driver
  OS version: 6.1.7601.2.1.0.256.1

  Normally think that the hard drive has failed or that windows update caused a software problem, but the inability to boot from any restore disk that makes me think that there is another serious problem with the hardware of the laptop.

  Any help would be appreciated. THX

  Additional note: when you try to boot from a restore disc, blue screen, error message:
  Stop: 0x0000007B (0xF78DA640, 0xC0000034, 0x00000000, 0x00000000)
  It is a hardware failure that cannot be restarted soft.

  I also removed the hard drive and RAM, reinstalled and rebooted, no change.

  Additional note: I was able to access the hard drive with a recovery of old program, focused on the (SpaceFM) ram charged through the DVD player. Hard drive data appears intact. Still does not start from the hard disk or a DVD of windows system.

  Thank you. Rather than buying a 4 GB or more large key USB comes from put this into hard drive replacement. Installed correctly, boots very well now. No other error of the optical drive... and no explanation I can see, but that's it.

  Unless something else pops up we'll just call cela a HARD drive failed after 2 years of common use. Thanks again.

• No OS and does not boot from the CD!

  Help! I have a laptop SONY VAIO that has used to have Windows VISTA on it, but frustrating a friend who thought he knew computers formatted the C drive! Now I have a laptop without OS and even though I have new vista Ultimate edition and windows 7 disks or yhem will start. I changed the BIOS so that it starts only internal optical drive but nothing! I did a repair disc in Windows 7 I have on another computer laptop and who does not, but I can not move forward. Can you please help?

  Hello

  ·         What is the model number of the computer?

  ·         Are you able to press any key to boot from the CD/DVD?

  I suggest you to contact Sony, because you are not able to boot from the DVD.

  Sony support

  http://eSupport.Sony.com/Perl/support-contacts.pl

  I hope this helps.

• HP Pavilion p7-1414 will not boot from the CD

  Hello

  I recently bought your desktop HP Pavilion p7 1414, I am trying to boot from a CD to reinstall Windows 8 - I put the CD to start first in the BIOS, but when I restart the computer and I have the CD, "press any key to boot from the CD" is not displayed.  It starts just directly to the computer HARD disk in Windows to connect.

  I have 64-bit Windows 8. 6 GB of RAM and a terabyte of HARD drive space.  I'm looking to reinstall Windows 8 for a new start.  Any ideas why it won't boot from the CD?

  Very happy!

  Hello:

  You must go into the BIOS and enable the legacy Mode and disable secure boot.

• Tecra M3 PTM30A will not boot from the cd to reinstall windows

  Hi all

  Totally new here and I have a question. I replaced the hard drive in the laptop, the old man died.
  I set the bios to boot from the cd. He reads the Windows XP cd for a minute then jump to trying to boot on the network adapter.

  Do I need to have the cd of recovery or must it be able to boot from a plain old XP cd?
  If it can boot from a normal cd is the stuffed ROM or am I missing something?

  Thanks in advance to anyone who can help you.

  Hello

  > I replaced the hard drive in the laptop, the old man died

  Your new hard drive is recognized by the Bios?

  > Do I need to have the cd of recovery or must it be able to boot from a plain old XP cd?

  You can use a recovery (if available) disk or Windows disk copy. In the Bios, you must set the Cd/DVD-ROM as 1st boot device and press F10 save and exit. Turn it back on. Thus, your computer you should start the installation of the Cd drive.

• Stops on his own computer and gives me a flashing orange power light when I try to turn it on

  It lights up then, but I am at a loss and don't know what to do

  Hello, Crystal,

  Brand and model of the computer, please.  Ex: HP Pavilion XYZ324

  If a Dell - problem with power supply causes flashing orange light

  (1) unplug the computer from the taking of surge protector or wall.  Leave that it unplugged for two minutes.  Reconnect the and restart.

  (2) ' ' ' ' shutdown computer. "" " If connected to an external modem, cut the modem and unplug the cables that plug into the modem.  Wait two minutes.  Plug the cables back in and try to turn on the computer.

  (3) disconnect the devices such as printer and try again bootingup, digital camera, try again starting, speakers, new start up attempt... etc...

  4)

• Re: satellite A300 screen turns off after the toshiba logo, will not boot from the CD/DVD

  Hello, I have this problem with Toshiba satellite A300.

  I deleted several files and folders of my drives C and E. To restart the computer, it only shows the Toshiba logo then a slightly gray white screen on a thorough inspection. Whenever I press CRL + ALT + DELETE, the computer restarts and behaves in the same way.

  I tried to use an external monitor, but there is no difference. The tent to start using a CD/DVD, same behaviour occurs, it does not start and screen remains blank after the Toshiba logo, I tried even to change g the order of boot, but in vain.

  What could happen?
  Thanks in advance.

  Hello

  It seems that you deleted system files and Windows no longer starts. Have you tried to restore the disk image factory settings or hard drive recovery? Or do copy the Windows installation... It is easier to reinstall rather fix the problem.

• M91p will not boot from the CD

  I try to install a new SSD in my M91p, but when I press Enter for the splash screen, change the boot order have only Boot from CD rom, then reboot, I get a "error 1962: OS not found" message.

  I checked the DVD rom is functional by returning to the old HARD drive and use it.

  What Miss me?

  
  

• R3000 Presario will not boot from the cd after installation of windows 7

  Hello

  I have an old Presario R3000, someone updated to windows 7, has a few problems, including the cd player read don't not bootable disc, because I would like to install Vista instead, any suggestions on how to solve this problem, thanks in advance.

  chefey aka David

  Hi Futoji

  Portable office, dismissed plugged DVD and voila, it worked. I have an installation disc Windows 7 Starter and installed as I thought it would be better for! GB of memory, was not bothered with it runs, so Vista, installed fine. Some drivers are missing, sound and player card, as it's XP, so no drivers HP, I have a fixed front sound, means add files in a folder of the directory, will have to google search it again once, thank you very much for your advice, which fixed the problem, I am not too bad for a surfer of money. I know the numbers of the missing drivers, it's just a case of locaing, some of the download sites are very confused. Once agai thanks.

  David

• error 303_will will not boot from the optical drive W / re disc

  Thanks for your time

  I have a pre Home HP G71 449WM computer PORTABLE PC WINDOWS 7 X 64

  I ran diag, he gave me (hard disk 1 (303) quick test full 10% complete)

  (305) full hard disk 1, HARD TEST drive has FAILED: what about hard disk

  failing or failed in any case, I changed the HARD drive for an ssd sata 2 and installed

  He also ordered the discs (3) of recovering formatted the SSD to another

  PC (primary healthy NTFS partition) No. DRIVE LETTER when formatted

  I loaded the 1st recovery disc in the optical drive, but it wouldn't start

  optical drive AND MY SCREEN IS WHITE

  the recovery disc are Moose HP (BDPX4721)

  THE SSD WORKED OK IN THE OTHER PC... ANY IDEAS WHAT I AM DOING WRONG?

  the printer has to do with boot_recovery_error 303

• Windows 8 HP laptop Pavilion will not boot from the cd?

  Hi all

  I have a Windows 8 HP Pavilion laptop. I forgot the password of my account, but I wasn't worried because I had a recovery disc. However, even with the cd in the laptop, I directed to the login page every time. I want the cd to run the place and recover my account! I have enabled the legacy in BIOS and disable secure startup, and I even changed my boot order to put the boot first CD. None of this works well. Can someone help me? I really want to access my laptop soon.

  Thank you

  Alice

  Immediately after switching on the laptop, press the ESC key to get a menu. Then press F9 boot options. Use the arrow key to move down and select/highlight the CD/DVD drive, and then press the Enter key.

• How can I configure my computer to another person can use with their own password and do not go through the mine?

  How can I configure my computer to another person can use with their own password and do not go through the mine?

  Hello

  Activate the guest account or setup a new account with the access levels that you must allow.
  either will work.

  How to activate the guest account enabled or disabled in Vista
  http://www.Vistax64.com/tutorials/126933-guest-account-turn-off.html

  How to create a new user account in Vista (also see the related tutorials)
  http://www.Vistax64.com/tutorials/93009-user-account-create.html

  User accounts in Windows Vista
  http://www.optimizingpc.com/Vista/multiple_useraccounts.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Built in Flash Video and will NOT display in the hosted environment

  Built in Flash Video and will NOT display in the hosted environment. The files generated: work on the development computer. I posted the same files in the hosted environment and flash are not displayed. I first thought it was Vista 64 IE 7 so I switched to IE7 XP and the same results. Yet, it is strange that the falsh works locally. I'm sure it's something simple I'm missing. Any help would be appreciated. Thank you.
  
  Stan

  What files download you?