stops unexpectedly when I try to run an iPhoto slideshow

Similar Questions

• Receive error message "MFC Application has stop working" when you try to run a PED Basic on Windows 7

  Original title: I am trying to run a PED Basic on Windows 7, I am not able to access my creations on my hard drive. When I try to open the file, I get a MFC Application has quit job message. Any ideas? __

  Window 7

  1.06 based PED

  Hello photoheiress,

  Check the following:
  1) go to Brother Web site and check you have the latest Windows 7 drivers/software for your Brother model.
  (2) try to run in Compatibility Mode. If your Brother model is compatible with Windows XP, then choose XP or the brother Software was written for any operating system.
  (3) when you install the setup.exe or .msi file, right click and select "run as Administrator".

  If please reply back and let us know if none of the suggestions helped solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I get an error, "host process for windows services has stopped working" when I try to run a program.

  host process for windows services has stopped working a problem caused the program to stop working correctly windows closes

  Original title: host process for windows services has stopped working

  See if you have rootkits. Run tddskiller, if it finds rootkits, select cure, wait for it to finish and then restart your computer

• get a ' player rgss has stopped working "when you try to run big fish game

  What is player rgss

  He's the player of games created with RPG Maker.

  Supposed to be This is a fix.

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• my Media Player from microsoft says this (symaddln) when I try to run it and stops. What do I need?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! my media player microsoft says this (symaddln) when I try to run it and stops.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  Hello
   
  What security software is installed?
   
  This "symaddln" occurs especially if you had Norton installed anti-virus software.
   
  I suggest you follow the steps below and check if the problem persists.
   
  Step 1:
   
  (A) I would say you temporarily disable your security software (if you are using Norton) and check if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  (B) If you already have Norton Security software before and uninstalled later, there would be traces of which would result in the computer does not normally. I suggest that you use their uninstall/removal tool to uninstall Norton Security software traces.
   
  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN
   
  Step 2:
   
  If this does not help, I would say you put your computer in a clean boot State and check if the problem persists. This could be the result of a conflict of software of third party causing the problem to occur.
   
  Note: Be sure to follow step 7 to start your computer in normal mode.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I installed quicken 2009 connected as owner on Vista Home Premium Notebook Sony. When I try to run Quicken I get a windows message immediately that "Quicken launcher has stopped working" Windows will attempt to resolve then problem__

  I installed quicken 2009 connected as owner on Vista Home Premium Notebook Sony. When I try to run Quicken I get a message of immediate windows Windows "Quicken launcher has stopped working" will try to resolve the problem then

  Hello Richard Popp,.

  I'm not an expert on Quicken so I do not know what help I will be.
  You could look at this post on the Quicken Forum and see if this information helps you.
  https://qlc.Intuit.com/post/show_post_full_view/cppSsgKbWr3PYHacfArQA8

  1 Quicken uninstall using the Windows Control Panel

  2. run qcleanui.exe and clean all versions.

  3. restart your PC

  4 Quicken resettlement to a new distinct and NOT in the Program Files folder in the folder where your Quicken data resides and install as administrator (if on Vista).

  5 update Quicken at the last updated R6.

  See if that helps. Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I try to run Quicken I get a windows message immediately that "Quicken launcher has stopped working".

  I have Vista Premium when I try to run Quicken, I get an immediate message of windows Windows "Quicken launcher has stopped working" will try to solve the problem then...  Quicken worked very well. I tried to reinstall with no luck still improved to 10 still have the same problem... I am the administrator, there must be vista? but I'm out of ideas

  http://Quicken.Intuit.com/support/ MS - MVP - Elephant Boy computers - don't panic!

• Computer stops when I try to run games, gets the blue screen locale ID: 4105

  Original title: blue screen, I don't know what to do

  Hi, for the last days of couple and officially from last week, my computer went to the blue screen with problems of memory, it seems.  I'm not very good with the technical part of the computers and I finally know what to do.  It gave me an error report which stops just when I try to use the search for a solution button.  He mostly stops when I try to run games on it, but sometimes he does when I'm not even in it. The last report of error was:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 4105

  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000005003
  BCP2: FFFFF781C0000000
  BCP3: 0000000000014FAD
  BCP4: 00014FAF00029F5F
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\050715-7051-01.dmp
  C:\Users\Ryan\AppData\Local\Temp\WER-11575-0.SysData.XML

  Please help me. I'm at a loss to know what to do.

  We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  
  
  
  
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask
  
  

• Get the "Local WMI connection failed" error when you try to run bbntcfg

  Wondering if anyone is aware of this error and what might be required to occur. The whole service of 4.40 BBPE is dying and when I try to run bbntcfg I get this error. I use this on a Windows 2000 Server (yuck, I know).

  The service fails with the following error;

  The Big Brother Professional Edition Client 4.40 ended in unexpected ways. He did this 3 times. The following corrective action will be taken in 0 milliseconds: no action.

  And I believe that these previous posts may be related as well (occur in the same minute);

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  Please try first:

  from a command window, run:

  net stop winmgmt

  CD %windir%\system32\wbem

  referential repository.old Ren

  net start winmgmt

  If the problem is not resolved, continues:

  winmgmt /clearadap
  ammo winmgmt
  WinMgmt /unregserver
  WinMgmt/regserver
  WinMgmt /resyncperf

  If the problem is still not resolved, continues again:

  CD %windir%\system32\wbem
  Mofcomp.exe cimwin32.mof
  Regsvr32 /s wbemupgd.dll
  Regsvr32 /s wbemsvc.dll
  Wmiprvse/regserver

  Hope this works now :)

• Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.

  Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.  When I try to catch the separator bar to go back to the left, only half of the small arrow icon and line appears, and it cannot be moved.   Can open the message by double clicking a message viewer.

  Hi there, alicefrompa!

  Thank you for using communities Support from Apple. From your post, I understand that you do not see the Message Viewer box which allows you to read your e-mails; only see you the Inbox that includes a brief overview of the message and are unable to restore access using the separator bars. I have had this happen to my own Mail app and am happy to let you know how I could fix!

  You are really on the right track - you want to roll your mouse over the divider between the Inbox and sections Message Viewer (which should now be on the extreme right edge of your mail window) and drag it to the left.  When you click on the receipt/Message Viewer box, the cursor turns into a line continuous black with a single arrow pointing to the left. When you see the cursor change, click with the left button of the mouse and (while holding down the mouse button in) drag the combination line / arrow to the left. You may need to drag a little further than before to get it. I had to hang mine almost completely in the middle of my Mail app before the display of the message box appeared.

  From there, you should be able to adjust the boxes to your widths you want as expected.

  If you are still not able to get the display of the messages visible after have try this, here are a few more things that you can do.

  1. Press command + O on your keyboard.
  2. Exit the Mail application, and then press on and hold the SHIFT key on your keyboard while reopening.
  3. Restart your Mac by selecting the menu  Apple in the upper right of your screen restart from the menu drop down.

  See you soon!

• When I try to run Age Of Empires with the CD in, I get a message "Please insert the right CD-ROM, select OK and restart the application.

  Former title: Trouble running games CD, post installation under Vista. That is to say 2 AoE, Warrior kings.

  I have vista on my laptop, I installed games like shogun and medieval total war and they both work perfectly, I tried to put it on the age empires and warrior kings: battles who are also on a cd format, I installed the last but they usually run after that. Although the instialltion is over, I get asked if I wanted to leave the program to run as administrator. : s

  DVD/CD drive recognize there is a disc, but does not work automatically. I can't install the program normally when I run the setup.exe for the game. When I try to run the program with the CD in, I get a message "Please insert the right CD-ROM, select OK and restart the application.

  I tried to run them in compatibility mode, using all variants. and also I tried soome of advice from the help article about the disk drivers. game discs are clean and one striped.

  Why can I install the program and access the drive to use the files it contains, but then not use the disk?

  Hello
   
  
  This problem may occur if one of the following conditions is true:
  a. you do not use the game disc to start the program.
  b. the CD player is not compatible with the program.
  c. using a copy of the program CD.
  d. you are not connected to the computer as an administrator.
  e. the programs interfere with the start of the game which is running but is invisible to you.
  f. the CD-ROM drive uses out-of-date drivers.
   
   
  I would ask you to try the methods listed in the article below:
  Error message or the game stops responding on the "Loading" screen when you start a Microsoft game: "insert the right CD.
  http://support.Microsoft.com/kb/228985/en-us
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I had installed the captain claw game and when I try to run the following error report is: of the Side-Scrolling Action-Arcade game has encountered a problem and needs to close.

  original title: C:\DOCUME~1\hariraj\LOCALS~1\Temp\7f3f_appcompat.txt

  I had installed the captain claw game and when I try to run the following error report comes... Please solve my problem...

  ....

  ARCADE-ACTION SIDE-SCROLLING GAME

  Of the Side-Scrolling Action-Arcade game has encountered a problem and needs to close.  We are sorry for the inconvenience.

  ERROR SIGNATURE

  AppName: cla.exe AppVer: ModName 1.3.0.60: cla.exe
  ModVer: 1.3.0.60 Offset: 000f3956

  THE FOLLOWING FILES MUST BE INCLUDED IN THE ERROR REPORT

  C:\DOCUME~1\hariraj\LOCALS~1\Temp\b285_appcompat.txt

  Please please please please help me... i will be grateful to you

  Hi Raj Kumar,

  You can follow the steps mentioned in the article below, which deals with a similar question

  Game hangs or quits unexpectedly
  http://support.Microsoft.com/kb/303032

  (Article apply to Microsoft games, steps for other games)

• When I try to run a game that uses DirectX, it gives no error message or anything it either, then closes.

  When I try to run Black Ops II I double-click the icon and open the Task Manager to verify that the process is running. I see that it is running. But 30 seconds later, the process stops. Then I ran DxDiag and he says I'm under DirectX 11. However when I look for dxcpl.exe in the System32 folder, it isn't here. That's what I think, it is the origin of the problem. Please help me find a way to fix the missing DirectX file!

  Data sheet:

  OS: Windows 7 Ultimate 64 bit SP1

  Processor: Intel Core i5 CPU M 460 @2. 53 GHz

  RAM: 6.00 GB (5.87 usable)

  Dell Inspiron N5010

  I thought that the question was already answered-

  "dxcpl.exe (DirectX Control Panel) is not a default Windows file. I think that it only would be present when

  DirectX SDK developer tools are installed. "

  Therefore, there is no point in having a dxcpl.exe. It is not relevant to the running of the games.

  It is used by software developers who are coding with C++, and because you have not

  the software is installed, this file is not in System32.

  -If you need more information, you can post on the TechNet forums.

  TechNet forums-

  .

• Driver.exe has stopped working when you try to play Driver.San Francisco.

  I get the message DRIVER. EXE. Haven't STOPPED WORKING, when I try to play the game, Driver.San Francisco on my computer. Windows 7

  Hello

  1. what game do you play?

  2. have you made any changes to the computer?

  3. this problem occurs only with the particular game?

  4. What is the exact error message you received?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to see link and check.

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista

  http://support.Microsoft.com/kb/2665946

  See also:

  If the problem is related to Microsoft, I suggest you to see link and check.

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032