Stor.E Basics 2 to USB 3.0 HARD drive

Similar Questions

• I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  What do you mean, your message is not clear.

• Toshiba 320 GB USB 2.0 HARD drive freezes computer

  I just bought a Toshiba 320 GB USB 2.0 HARD drive and every time I try to transfer the data of light go red after 20 seconds and the computer crashes. The only way I can sort is by turning it off at the wall. The HARD drive works fine via a USB1.0 port and other devices like printers etc joysticks work fine through my USB 2.0 Pci card, but not my HARD drive, any ideas what this could be?
  Thank you

  Hello

  You can also try to use the USB1.0 port. But if you want to use data transfer high, you can try to use the firewire port. Using Firewire USB2 adapter for example.

• How to make Toshiba USB 250 GB HARD drive read-only?

  Hello

  I just plug a Toshiba USB 250g external hard drive to replace all the sticks of memory, I've been using.

  I'll use this external hard drive to copy files to other computers and I would like to know how to make the drive read-only.

  Moreover, all the other tips to protect the disc would be extremely welcome.

  I use a Dell with Windows 7 laptop.

  Thank you very much

  Dougal

  I don't know what HARD drive you have exactly, but I know that Toshiba offers a software protection with external hard drives.
  Did you check manuals? Is something like that provided with your HARD drive?

  Maybe you need to use some third party software part for the protection of files on the HARD drive. Google all over the place.

• Is there a software that shows my processing of files and folders in the pc to USB or portable hard drives for many years?

  Is there a software that shows my processing of files and folders in the pc to USB or portable hard drives for many years?

  Thank you

  Nope, nothing like that is registered unless you have installed tracking software to connect it advances.

• Problem with Toshiba Stor.E D10, 1 of 5 TB external HARD drive and eSata connector

  Hello

  I have a problem with eSata HARD drive. I have a toshiba Stor.E D10, 1, 5 to external HDD. When I plug it into the connector back eSata, Windows 7 recognize this and I can read it, but when I try to write about it, it freezes and I have to unplug it. When I connect the Toshiba Stor.E D10 with the USB cable, everything works fine. The problem is when I use the eSata connector. I have updated the BIOS to the latest without any improvement. In the BIOS, I tried esata IDE and AHCI controller without success.

  My system: Windows 7 64 bit Ultimate, card mother Gygabyte GA-X58A-UD3R(rev. 2.0)

  Any help is happy.
  Thank you

  Javier,

  Hello

  Did you check and test the drive external DRIVE with other computers that provide the eSATA interface?
  I think that this should be done because theoretically the problem might be related to the laptop s / s computer eSATA port.

• Windows Vista does not recognize external USB 260 GB HARD drive

  I have a 260 GB Seagate external hard drive, a laptop Toshiba satellite and Windows Vista Basic.

  The same Windows usually choose the hard drive when I plug it, it does not appear in Device Manager and in disk management, the only way I can get it to work is to uninstall all the USB root hub and then restart the computer, and then reinstall the USB root hub and plug my hard drive.

  When windows finally recognizes him, the only way to find the driver must choose c:\ manually and there's the search for the computer.
  Works for the time that I have the computer hard disk, but when I stopped it, next time I use the computer, I'm having exactly the same problem.

  I tried to remove the hard drive safely and then close the computer and by him plugging back in after windows has loaded, I tired it connected from the computer and tried to close the computer with connected.

  None of these work.
  Can someone help me please?

  Strange?  :|
  But what need s say Microsoft Windows so I don't expect 100% without bug OS ;)

  Disconnect the USB HDD and remove all the USB ports and Device Manager USB controllers. After restarting again the OS should reinstall ports. Then you could try to reconnect the HARD drive.

• To install the new eSATA / SATA to USB 2.0 hard drive in an external enclosure but the computer does not recognize the drive in disk management

  I have an old computer with installed Microsoft Windows XP SP2 and 3.  I bought a new hard drive and also a new external hard drive for her case.  I have correctly installed the hard drive inside the enclosure, and I think that I have installed correctly (in the motherboard SATA port) eSATA port, according to the manufacturer's instructions.  I plugged everything... first eSATA, then power and power switch.  I restarted the computer, and I chose to analyze disks in disk management.  However, the new drive is not recognized.  The SATA port on the motherboard could not work or did I buy the bad, perhaps, hard drive enclosure for my system?  Or something related to the software?  Thank you.

  Hi Donnadream,

  Connect the hard drive to another port and check if that makes a difference

  Step 1: You can follow the steps mentioned in the article below, which deals with a similar question

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Step 2: Download and install the latest drivers from the chipset of the computer or the manufacturer of the motherboard and check

  Step 3: Hard disk can be turned off in the BIOS; You may want to enable

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists, it is a hardware problem, contact the manufacturer of the hard drive for a more specialized help

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of Leopard by USB for external hard drive

  Long story short, I'm trying to install OS X Leopard on an external hard drive. I've restored a USB key to be to install OS X disk image. When I try to boot to the USB I get a kernel panic (some code in the upper left corner and a message saying that I have to force stops). I am doing from a 2015 rMBP running the latest version of El Cap I have done this many years ago and had no problem. Anyone know why it does not work now?

  A Mac of 2015 is too recent to boot Leopard.

  (142979)

• Extermal Toshiba USB 320 GB HARD drive not recognized correctly

  My hard drive does not recognize now them itself as a hard drive just an AT2P RC42 Cypress and is now useless after a few months in use.

  I uninstalled and reinstalled by the Device Manager. I then tried on another computer and I have the same problem, so it's the hard drive and not on the computer.

  It's an external drive USB 320 GB toshiba that previously worked fine, but now think its thing and nothing else.

  What can I do to fix this problem? Please help all my data on this drive...

  Hello

  Check it please this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17412 topic. You will find similar discussions.

• External USB 3.0 HARD drive does not work on USB 3.0 port

  Hello guys,.

  I have a problem with my external HARD drive and the problem is that it is USB 3.0 feature does not work in my computer.

  The curious thing is that it works very well in the SATA port or a normal USB 2.0 port.

  Y at - it a failure with the HARD drive or is there something wrong with my motherboard (M5A99 fx pro r2.0)?

  Thanks in advance.

  From my point of view of the few is not HARD drive problem because the HARD drive operates in a USB 2.0 port.

  I m wondering if you tried to update the USB 3.0 driver.
  Have you tried this HARD disk in another computer / USB 3.0 ports?
  I think that its worth a check.

  Also, I read on some problems of USB 3.0 controller from different manufacturers.
  Sometimes, it might be possible that some problems of compatibility between different devices may arise.

• Where to buy STOR. E ALU 2, 3.5 "external hard drive 2 TB of capacity?

  Hi all

  I am looking to buy two STOR. E ALU 2, 2 TB disks 3.5 "to replace the two ALU 1 TB drives that I currently have.

  Toshiba press releases and information all indicate these drives should be available in the 2nd quarter of this year. We are already in August and there is no sign of them yet.

  I'm really eager to these readers as they look the part next to my Apple Mac Mini, which I use as a media server.

  Does anyone have any idea when these discs will be available or where I could find one?

  Thank you very much

  John

  I googled a bit but the result was the same as yours, that I wasn't able to find any online store where to order this HDD.
  I put t think anyone here can offer an adequate answer to your question then I think your only option is to wait and see when the HARD drive will be offered on the market.

• Satellite 2430-101: external USB 2.0 HARD drive problem

  Hello everyone,
  I have Toshiba satellite 2430-101. Recently I bought external 40 GB hard drive. When I connected to my toshiba usb hub, it is said that it exceeds the limit of the power, and I need to detach the external hard drive. When I read these last questions, someone suggested to uncheck the power supply to the usb hub options, but he says always the same. They are someone to help me.
  Concerning
  Sri

  Hello

  Well, in my opinion, this problem occurs if the USB port can't provide enough power.
  In this case, that the USB hub must be connect to external power.

  Good bye

• Satellite M30X: Problems with external USB 2.0 HARD drive

  Hello
  I have a Toshiba Satellite M30X. I bought recently a 200 GB external hard drive. It has its own power supply. If I connect with USB 2.0 on my laptop, it happens to disconnect and reconnect leads him. Sometimes it works, so I can put data on the disc. Then again, he diconnects and reconnects repeatedly. I've tried a different USB Port, but there is no difference. It's very strange, because I plugged the external hard drive to many other computers (Laptop and Tower) and it STILL works! It is that with my cell phone, it disconnects and reconnects all the time. As I said, not always. Sometimes it works for a half an hour or two and then the action begins again...

  If anyone can help?
  Oxford Lutz

  Hello

  I put t know if this can help, but you can try to connect a USB hub with an external power supply. Then try to connect this external HARD disk to the USB hub.
  I know that it of not a exactly the solution but maybe it will help you to solve this problem of USB.

  Good bye

• Disk recognized as usb flash external hard drive

  I have an old Samsung SP0411N IDE internal hard drive, I am trying to use as an external hard drive with a SATA & IDE adapter USB & eSATA Conceptronic csatai23u. Windows XP with Service Pack 3 detects the etc. of Sata to usb etc, but instead to detect the hard drive, it detects a usb mass storage, which according to me, that means a usb flash key. The connection has worked before, but I don't know how to make it work again. The last time it worked Windows says that it has detected a "Samsung SP0411N disk drive". The device does not show in my PC.

  Hi EduardoGB,

  -Are the other devices is recognized without any problems?

  See the section "my hard drive connected to the CSATAi23U is not detected by my computer" from the link below:

  http://www.Conceptronic.NET/site/desktopdefault.aspx?TabIndex=2&tabid=410&PC=CSATAI23U

  Also try to download and install the software for the product from the link below:

  Downloads

  Additional reference on:

  CSATAI23U