Stor.e TV + does not recognize external DVD

Hello!

I connect an external DVD / Blu - ray with a USB cable player (as suggested by the manual), but when I go to the icon of the DVD, I get the message "no changer". I plug in a Phillips bluray that seems pretty standard... Anyone who has faced this problem before or can give advice?

Thank you!

Hello

You are right
The Stor.E + can be connected to the external CD/DVD drive with a USB cable.
To do this you must select DVD auto play option and need to fix on IT.
Did you do that?

Connect the DVD player via the USB cable to Stor.E TV +.
Select setup-> system-> AutoPlay dvd and active automatic DVD playback
Then select external DVD option in the main interface of the Store TV +.

If this does not work, I recommend you to test the Store TV + as part of another drive to CD/DVD, but to my knowledge, there is no particular standard (of course USB 2.0 should be supported) which would be necessary

Tags: Toshiba

Similar Questions

  • Windows Media Player does not recognize external DVD drive - so how do you watch a movie DVD?

    I just connected an external DVD - RW drive in my ultrabook of Windows 8 for the first time.  The ultrabook recognizes the drive and the dvd movie which are, but Windows Media Player only - only says: "connect a device".   The resolution of the issues said that the drive works properly.  I can't copy this movie at the video store, because it's a borrowed DVD.  So, how do WMP to recognize the DVD drive and play the movie?

    DVD playback is possible in 8 Pro windows media center. Player Windows Media 8 has no native codecs DVD added to it. You have the option to purchase an update for your Windows 8, which is Media Center Pack to allow playback of DVDs on your computer.
    * Note: Media center pack is only an upgrade for existing computers to Windows 8.
    BryanNeil
  • computer does not recognize external DVD RW drive

    Of course, I am one of the many people who can't afford a new computer, and I still have XP.  I have a LG external DVD burner and have been using it for a legal problem.  All of a sudden, the computer will not recognize its existence.  This happened in the middle of a writing and I run many tests and diagnostics, followed many responses on the Microsoft web site, but I can't get a response.  Help!

    Hello

    · What is the number and the model of the computer?

    · Were there any changes made on the computer before the show?

    · Who is the service pack installed?

    You can follow the steps listed in the link below: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/982116

  • Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

    I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

    What is your indication that the DVD is not recognized?

    Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

    I did all the updates and it does not see the DVD in the DVD drive.

    If you put another type of disc in the optical drive, as a music CD, it is recognized?

  • Qosmio G40 does not recognize CD/DVD

    Qosmio G40 does not recognize CD/DVD, or sometimes it reads some DVD or CD. But it does not burn.
    Once I managed to burn, but could not be able to read the CD.

    All the world is facing this problem?
    What would be your suggestions?

    Thanks in advance

    Hello

    This isn't a real problem.
    These problems can occur using incompatible media or not fully supported.
    I had this problem too. You wouldn't believe how many CD or DVD I used to know what media would be fine.

    Finally I went to TDK's and for a long time I m really satisfied.

    By the way; User manual you should provide some useful details on the compatible media. Check also.

    Good bye

  • I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D

    Original title: DVD problems

    I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D what is the solution. I tried the fix and I also used the Center 'Fix it '.

    Hello

    1 how long have you been faced with this problem?
    2. don't you make changes on the computer before this problem?
    3 are. what patch you referring?
    4. this happens to you with some specific discs?

    Reinstall the drivers for DVD player and check.

    1. click on start > run
    2 type devmgmt.msc and press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
    3. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
    4. When you are prompted to confirm that you want to remove the device, click OK.
    5 restart the computer.
    6. when the computer restarts, the drivers will be installed automatically.

  • Acer Aspire 5517 does not recognize the DVD in the drive

    I just bought this new laptop last night. The DVD player does not recognize any DVD or CD placed in the tray. All if the player starts but nothing appears on the monitor. I have the auto-play configured to recognize any software install cd/dvd.

    http://support.Acer.com/

    As it is new, it is under warranty.

    Contact Acer A.S.A.P. > and make a claim.

    See you soon. Mick Murphy - Microsoft partner

  • DVD burner does not recognize blank dvd inserted

    DVD burner does not recognize blank dvd inserted into the pc

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

    my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

    This might help: http://support.microsoft.com/gp/cd_dvd_drive_problems

  • My Dell laptop does not recognize the DVD / CD player or D drive more.

    My laptop does not recognize the DVD / CD player or D drive more. It is built in and included with the computer is a Dell. Can't use it because the computer can't find it. All ideas

    Original title: DVD player

    If it just happened all of a sudden, you can restore the registry files of the system in working order by following option n ° 1 on this page.  If this does not work, you can be reasonably sure that the configuration of the system is not the problem and start looking into other possibilities as a broken drive or a bad connection inside the cable.

  • LightScribe software does not recognize my DVD LightScribe drive. Can help any one? __

    LightScribe software does not recognize my DVD LightScribe drive. Can someone help?  I belive what happened after I enstalled Windows 7!

    Have you installed the latest http://www.lightscribe.com/downloadSection/windows/index.aspx?id=810 Lightscribe system software

  • Windows does not recognize the DVD drive at startup

    Laptop: Dell E6410 ATG wt / verzion A15 Bios

    OS: Windows 7 SP1 with the latest updates.

    The question I have is when I log on Windows 7, the laptop does not recognize the DVD drive. The reader will not be displayed in my computer or Device Manager. I can get around this physically ejecting the disc and reinsert. If I do this drive appears in my computer Windows and Device Manager. It will read DVDs and CDs fine. I am able to reproduce the problem above mentioned question if I restart the laptop. If I restart the laptop the DVD drive won't be recognized and reinsert the drive will get it appears again.

    This problem occurs if I try a DVD - RW drive and an old DVD - ROM drive. If I go into the BIOS before windows, I can see the BIOS recognizing drives ok but not when initially get into Windows without having to eject and inserting the disc.

    Thanks in advance for any help.

    I guess that this must be a hardware problem then.

    Seems odd.

    The only other thing I can think of, after reinstalling W7, is a BIOS problem eventually. A strange setting it may be an older version of BIOS with a bug in it. If you decide to update the bios, make sure that you get the latest version for your make and model PC and follow the instructions. You can destroy a PC with bad BIOS or update the procedure.

  • Windows7 dvd creation does not recognize my dvd burner

    I have windows 7 pre-installed on a computer inspiron dell less than 2 years.
    Create DVD does not recognize my DVD burner. Roxio, and DVD Styler.
    Also, in the computer, the dvd drive is not listed in the left side, but he is on the right side.

    Hi Luboceric,

    Thanks for the reply.

    I suggest you to update the drivers from cd/dvd and check the status.

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    You can also uninstall the driver and reinstall the driver to check the status. You must contact the manufacturer of the computer for the driver updated and appropriate.

    Feel free to post your request here on the Forums of Windows, we would be happy to help you.

    Thank you.

  • My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader. Do you have any suggestions?

    My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader.  I have just upgraded to Windows 8 of Window Vista. Do you have any suggestions?

    Hello

    I see nothing unusual, except that there should be a "0001", or even "0002"...

    When you have made the registry change, you used the command line (Admin)?... the process may not work with the regular command prompt...

    Also, try to go to Device Manager, right click on your DVD drive, click on uninstall and restart.

  • computer does not recognize a dvd in the drive

    Hello

    My computer does not recognize the presence of a dvd in one of my two drives, although she acknowledges a CD.  This happens regardless of what dvd I insert.

    Thank you very much

    PAM

    Try this;  Restart your computer before trying again the disc that plays on your DVD player.  If this does not work then there is only one possibility;  your DVD drive is DEAD and you need to replace it, or buy an external CD/DVD drive.    He comes to the end of the mystery.

Maybe you are looking for