Storage of liquid E3 problem!

Similar Questions

• format micro sd card acer liquid e2 problems

  Hello I have an acer liquid e2 smartphone running on android jelly bean 4.2.1

  recently, I bought a micro sd with a capacity of 32Gbs of kingston card

  at first glance, everything worked fine, but yesterday, I wanted to transfer files via 4Gbs.

  I noticed that it is not possible for FAT based micro sd for this cards but if format you the card micro sd for exFAT, or NTFS you could work around this transferlimit.

  so today, I bought a drive from sd cards to solve the problem.

  I put my micro sd card in a sd card and then the sd card in the sd card reader/writer.

  I connect to my computer and I reformatted my card micro sd, exFAT AND NTFS, but none of them has been recognized by my phone.

  so I searched more on this subject, and it seems that android supports NTFS...

  so I wonder is my e2 liquid acer problem here? and what do I do?

  I hope that I did not purchase this reader/writer for sd cards

  Thanks for the help

  Sorry for the late response

  my phone is rooted so I lack it but there were a few problems update even if it was properly the

  so I changed my phone to its factory settings and updated to 4.2.2

  It was not always able to recognize NTFS in itself, so I searched again and found an app that should be able to do

  the app is called "paragon NTFS and HFS +" it wanted to download it but I need to root my phone to use this application

  so I rooted my phone after update to 4.2.2 and downloaded this app

  now, I'm finally able to use my micro sd NTFS-formatted card

  I don't know if the app alone would be enough to do, but it was clear that I needed the app or at least root

  4.2.2 update alone is not enough

• Update to iOS 9.2.1 creating storage on the iPhone problems 6

  I upgraded my iPhone 6 iOS 9.2.1 a few days ago. «Since then, a message of "storage" almost full keeps popping up on my screen all the minutes and whatsapp becomes unusable ("your iPhone is running low on storage.» So Whatsapp can continue to work correctly, up to 100 MB of space free by: 1 removing applications longer you use, 2 large delete videos from your camera roll, 3 manage your storage in the middle space > general > use > Storage manage). I did all the three things mentioned above. However, no matter how many applications or videos I remove, storage space remains the same: use - GB 11.6, available - 0 bytes. I can't possibly delete data on my phone without losing the essential information.

  I backed up even my phone to my Macbook Eve, reset to the factory settings and then restored my old version back up on iTunes. The problem seems to have been resolved, and there were 4-5 GB of free space on my phone. The phone worked fine all day yesterday, but today the message 'almost complete storage' keeps popping up again and my applications have become unusable again. When I connect my phone to iTunes, it informs me that an upgrade to iOS 9.2.1 is available and asks me if I want to download the update. However, when I go into the settings and the "Software Update" from my phone, it says "iOS 9.2.1. Your software is up-to-date. I don't want to delete applications or data on my phone, more particularly when I still 4-5 GB of free space. What should I do?

  http://www.Macworld.co.UK/how-to/iPhone/how-to-make-space-on-iPhone-iPad-photos-vid eo-ios9-3524712 /.

• Storage of liquid E2

  Hello

  I have a problem of sound on the storage, when I tried to install an APP, it will not directly install in my SD card.

  can someone help me, please. im a beginner with andriod

  preferred installation location = there only internal, phone, let the system decide no SD card option options

  also my default writedisk is "SD card"

  Heres my phone comments

  Build: Acer_Av061_v370_1.018.00_ww_gen1

  Andriod v4.2.1

  If an update is necessary, please help me how to

  No rooting...

  Please update to 1.023:

  http://global-download.Acer.com/GDFiles/OS/OS/OS_Acer_Acer.AV061.V370.1.023.00.WW.GEN1_A42J_A.zip?AC...

  then check if an OTA update (use a Wi - Fi connection) is available, since the latest version is: 1.032

• BlackBerry in storage blackberry z10 Z10 problems

  Hi all! After os updated 10.3.2.2836. In my opinion, this device for the largest system operating system itself. 16 GB for the system device already, if it cannot be reduced to a minimum for data storage

  Before this latest OS update storage, storage is never complete. I had to remove all the application but the rest of his stay of 1 GB. It is equivalent to devices from other brands

  helps to refine the system so that any storage space for the operating system itself. or there are other ways to this problem other than total elimination? THX

  I can't understand your message, but it may not be important. Read more and see what you think...

  The Z10 has 2 GB of RAM and 16 GB onboard flash storage memory. The operating system and applications are in RAM. Embedded flash memory is for the media, and some data of the app are stored here as well. As a general rule, you need to store your photos, video, audio, all you can on a card microSD; but there are cases that you have no control and in these cases, the data will be stored on the camera flash memory.

  I don't know why the camera flash memory seems to be filled when all indications are that she shouldn't be. I have a theory, but no need to enter. You prefer better is most likely do a security wipe. I do not know a better solution (but I am willing to learn, if someone a pole).

  Then... Perform a full backup. If you use a memory card and it is encrypted, you will need to disable the media card encryption and let the removal of full encryption. As an additional security measure, I copy all the files from the card to a computer using the link, before disable you encryption. Then do a security wipe. Then, restore the backup and install all your applications. If you use the encryption of multimedia card, you can turn it back on it.

• VMware Vsphere HA (problem of storage in common) and problem of band network bandwidth

  Hi all

  I am setting up VMware VSphere HA on ESXI 6.0

  I have 5 hosts running, each host has 2 management networks main network 1 vMotion and 1 network card for balancing with the management network. (each NIC 1Gbit uplink)

  I also attached to each card a FC (Fiber Channel) connected to HP 3PAR storage.

  each host have 1 TB or 2 TB Fiber Channel-attached storage.

  When I was setting up the AP he stated that he did not have any shared how storage can I allow other hosts to see each store data as a shared storage. NB: when I go vsphere client to web I see all the storage of each host.

  I also want to allow FT on a virtual machine, I have also a problem of bandwidth insuffisent or something. .

  also, I enabled fault tolerance on each NIC attached to the host.

  also another question: should I export volumes (LUNS) to all hosts in the AP? (in fact I exported each volume to each host separately) for example:

  Volume 1: HP3PAR_ESX1 exported to HOST ESX1

  Volume 2: HP3PAR_ESX2 exported to the ESX2 HOST

  Volume 3: HP3PAR_ESX3 exported to ESX3 HOST

  .. .etc

  can you me clear on this issue or guide me to where I can solve these problems please.

  When I try to activate the FT on the VM I the following warning attached

  This message was edited by: coolirc attached image FT problem

  There are memory FT requirements compatible VM is through two virtual, primary and secondary computers. so it will consume the same amount of resources of both ESXi hosts.

  VM with 10 GB of RAM allocation, turn on FT booking VM is now 10 GB RAM, so 10 GB + VMkernel consumption General host running primary VM and same amount of the host that is running with secondary VM. on top of this admission control in support of the failures of host we are going to tolerate so say primary VM host fails, then secondary VM becomes the new primary and triggers a new high school to be created and powered in one of the other host survivor in your HA cluster but which will be successful only when you have sufficient resources available to satisfy a reservation.

  your source host has 16 GB of RAM and one of the destination host also got 16 GB of RAM, so if you try to activate pi after disabling admission control on your cluster policy, I think that it should allow you to activate FT without errors. [if it still does not work so if possible, turn off all other virtual machines for free resources or to try to reduce their reservation manually if they are running with a reservation and try again.]

  with admission control, the necessary resources would be even higher.

  screenshot of Cluster summary reports that you have 4 guests in it and the memory resources available about 30 GB to 60 GB total memory. But isn't always the right figure, if you go to the monitor-> book resources, is where you will find actual "ready reserve", it's the right amount of reserve memory that you will be able to use across several virtual machines, you run in your cluster.

  I tried 2 vCPU vm FT in vSphere 6, works very well, but never tried with Hardware version 8, in your case, your virtual machine is hardware version 8, although I'm not sure if it is mandatory to have the hardware version 11 VM for FT so ideally it should work, but virtual hardware version if possible vm upgraded to 11.

• Graph of storage (about this Mac > storage) seems wrong. Problem?

  I have a macbook pro running El Capitan. When I open "about this Mac" and go to the tab "Storage", here is what I see

  

  Note that the disc is a 500 GB drive. There are approximately 375 GB of free space. «But as you can see, on this Mac > ' storage ' suggests that about 423 GB are being picked up by 'Apps'.» The idea that there are about 375 GB of free is supported by 'get info' on the disc:

  

  But clearly, you can't 375 free concerts and 423 gig picked up by what anyone on a 500 GB drive.

  I remember (but don't have images) the amount taken up by 'Apps' wasn't this big one last week, even if it was even bigger that what could have been possible.

  I ran disk utility > a few times and at least once in single-user mode, as well as when executing a backup bootable flash drive.

  What happens here? Is this a serious question?

  Reindexing can be corrected: https://support.apple.com/en-us/HT201716

• Flipcover Acer liquid e700 problem

  Any body can help me, how flipcover active in acer liquid e700? Such as advertising, may take the phone with flipcover closed?

  Thank you...

  v 1.0.18.00 is your solution

• Liquid E3 - problem of Status Notification bar

  Hi all!

  Here's the problem - whenever I take a call... when the phone against my ear/head... him receives Notification Status BAR "flow down" and sometimes I'll accidentally tap the icon of the 'flight' fashion and cut the call, or I'll tap the 'Settings' and continue to launch the phone in all types of different settings as I speak until finally I accidentally cut the call.

  There is a way to "Lock" the Status Notification BAR does not scroll down?

  I contacted ACER Tech Support and they say that it is not an option to do this, because it is a function of the phone that the Status BAR Notification CAN scroll down.

  So, I guess another question would be - "Is there an Android application that allows to lock the Status Notification bar?"

  Thanks in advance people!

  Paul

  If you put the phone near your ear, that the screen should close, try a call and get your hands on the proximity sensor.
  If the screen does not stop, there is a software problem, a factory reset can probably fix it but you will lose your data.

• Mass storage controller driver installation problem

  Hi my computer is Sony Vaio VGN-NR38M/S and I installed a new copy of windows 7 Home premium 32-bit (no update for vista) but it me in the Device Manager shows Mass Storage Controller driver error even I tried to install windows update but nothing if someone could tell me where I can get the drivers for it and install it

  thanx

  Hello

  Contact the manufacturer of the computer, and try to get the downloaded drivers.

  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=24&NAVDISP=PC

  Also check the link mentioned below as a reference.

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this information helps.

• rebuild the RAID1 with Intel Matrix Storage Manager Dimension 9150 problems

  I installed the RAID 1 a week ago. Today, it has been degraded. I tried to rebuild after deleting a RAID volume, create a RAID... of the RAID configuration utility... There was no Windows utility to work of the... Now, all the data disappeared and I have a white RAID configuration. Is there a way to restore it or I have to reload all along? The Intel Matrix Storage Manager, I had downloaded from the Dell support page. R130118.exe. I loaded the wrong program. I am running XP Pro SP3.

  Thanks for any help.

  When you use the option ROM Intel to set up a RAID, the drives are initialized before established the RAID volume.  Your data may still be present, but as an earlier poster said, you will need to go to a data recovery provider to get.  For later use, you must use the Intel Matrix Storage Manager, or his later incarnation, the technology Intel Rapid Storage Technology, application to build a RAID from a working drive.  Normally, a RAID 1 will rebuild automatically if you have removed a faulty drive and install a new, white, this hard drive place of the failed disk.

  The Intel product requires Windows to be installed and running before it can be used.  There is also a download for the driver only, but which is used during the installation of Windows if the SATA driver is missing from your Windows installation CD-ROM.

• vSphere high availability with no shared storage? And general problems with VMware partner supplier

  
  HA can function without shared storage?

  It may not by the availability of vSphere manual.  However the global VMware partner who sold me on VMware solution said that the shared storage is not required for HA.

  This is the same guy who told me that I would not need to buy Windows Server licenses because everything was included in the package (vSphere Essentials Plus).  Now, I have no Windows license, no shared storage and a customer who will not be happy that we did not include these costs in the citation for this project.

  HA can function without shared storage?

  No.... you need a storage shared for HA.

  This is the same guy who told me that I would not need to buy Windows Server licenses because everything was included in the package (vSphere Essentials Plus).  Now, I have no Windows license, no shared storage and a customer who will not be happy that we did not include these costs in the citation for this project.

  Maybe your partner speak the vCenter Server Appliance that is included on vSphere Essentials Plus and you can use this device to manage your vSphere, ESXi without need a VM of Windows (with Windows license) to install the vCenter server.

• license storage i/o control problem

  Hello

  We test e/s control of storage in a dev environment here and when looking to obtain the following

  Message:

  "< Ds > data store is connected to one or more hosts pre-version 4.1 that do not control of storage i/o support.

  What is strange, that we run esxi 5.0 update 2 so should not receive this message.

  Any help welcome

  Hello

  You are a company like?

  Check out http://communities.vmware.com/message/1867802

• Liquid-Design problem (Flowing gruid)

  Hello

  I use Dreamweaver model with flow gruid which offers

  CSS three-piece as Mobile, Tablet and desktop computer.

  That works very well but if change something in the mobile css the

  Internet Explorer also do it for the desktop version. Is there a

  CSS-Hack or solution it works well?

  I hope that I can describe my problem right and that someone knows the answer.

  Thank you in advance.

  Best regards

  Mark

  Function in FluidGrid of DW CS6 contains a respond.js file that helps pre - IE9 browsers to render the questions from the media.

  CS6 (17 min video) fluid grid layouts

  http://TV.Adobe.com/watch/learn-Dreamweaver-CS6/using-fluid-grid-layouts/

  Creative cloud 12.2 grid improvements in fluid layouts

  http://blogs.Adobe.com/Dreamweaver/2013/02/updated-fluid-grids-in-Dreamweaver.html

  Step by step tutorial - fluid construction grid Layouts in DW CS6

  http://www.Adobe.com/inspire/2012/08/fluid-grid-layouts-Dreamweaver-CS6.html

  Nancy O.

• Adding storage to esx. Problems with VCB proxy

  Hello

  I just added 4 FC LUN and them have initialized on ESX 3.02 with no problems.

  I went to the VCB proxy, which had the automount disable, then I think that I made a mistake because I put them online (done not initialized) and after that Vmware can't access these drives vmfs.

  Try to solve this problem I did the automount disable and scrub, but I don't know what to do next. Should I restart VCB proxy?

  According to some posts here, I've run ' fdisk-l/dev/SD all? "command and it shows that these 4 discs didn't fb partition type.

  Based in another post, I ran fdisk against each drive but I don't have the ability to place the partition type.

  Can someone help me on this?

  Thank you

  My DSL is peeling. But looking over your Yes steps. I can take down a second chance. I can't provide reliable help that I continue to be disconnected.