storage of output in a table problem

Hello

I am trying to store the analog data in a table and then save it as a csv file. But for some reason, I get only 1 value in my saved file. Please look at attached picture of the block diagram. I can't move all save loop as process (0.05 seconds) writing slows the rate of acquisition of file block. I'm trying to store all the values output from a large table and at the end to save all values in a single file. But the table seems to be adding

Sine

Sorry, but I didn't look carefully at what you were doing. You still need a registry change so that a new result will be added to a previous result.

Tags: NI Software

Similar Questions

  • Packets exported 11 g, but when I import on 12 c error of ' the target 11.2.0.3.0 database is an older version of the 12.1.0.1.0 source. Thus the storage clause is ignored to avoid problems of incompatibility between the versions. »

    Packets exported 11 g, but when I import on 12 c having error of ' The 11.2.0.3.0 target database is an older version of the 12.1.0.1.0 source. Thus the storage clause is ignored to avoid problems of incompatibility between the versions. »

    When I export only 1 package and then import, then I have no error and imported successfully, but when I do bulk above mention error comes.


    How can you make with the help of the SQL Developer or query?


    Kind regards.

    The problem is solved since
    Impdp iris/tpstps@PCMS full = Y dumpfile INCLUDE PACKAGE VERSION = 11.2.0.3.0 = packagespcmsTWO.dmp =
    query

  • Output in a Table format

    Hello

    In PL/SQL, I'll have a requirement to send a mail.

    This mail contains the message in a tabular format.

    How to have output in a table format.

    Please help me.
  • Changing aid necessary table problem

    Hello. I hope someone can help me with this problem.

    I have two tables, an and mv. Create the following script:

    create table (mv)
    the moduleId Char (2) CONSTRAINT ck_moduleId CHECK (moduleId in ("M1", "M2", "M3", "M4', 'M5', 'M6', 'M7', 'M8'")).
    credit ck_credits Number (2) CONSTRAINT CHECK (credits (10, 20, 40));
    constraint pk_mv primary key (moduleId)
    );

    create table (its)
    stuId Char (2) CONSTRAINT ck_stuId CHECK (stuId ('S1', 'S2', 'S3', 'S4', 'S5')),
    moduleId tank (2),
    primary key constraint (stuId, moduleId) pk_sa,
    constraint fk_moduleid foreign key (moduleId) references (moduleId) mv
    );

    And the scripts below is to insert data into the two:

    insert into VALUES mv ("M1", 20)
    /
    insert into VALUES mv ("M2", 20)
    /
    insert into VALUES mv ("M3", 20)
    /
    insert into VALUES mv ("M4", 20)
    /
    Insert in mv VALUES ('M5', 40)
    /
    insert into VALUES mv ("M6", 10)
    /
    insert into VALUES mv ("M7", 10)
    /
    Insert in mv VALUES ('M8', 20)
    /


    insert into a VALUES ('S1', 'M1')
    /
    insert into a VALUES ('S1', 'M2')
    /
    insert into a VALUES ('S1', 'M3')
    /
    insert into a VALUES ('S2', 'M2')
    /
    insert into a VALUES ('S2', 'M4')
    /
    insert into a VALUES ('S2', 'M5')
    /
    insert into a VALUES ('S3', 'M1')
    /
    insert into a VALUES ('S3', 'M6')
    /

    Now for the real problems.

    First of all, I need to try to overcome the problem of table mutation ensure that stuid = S1 in table its can not take the two moduleId M5 and M6.

    Just one or the other. I created a single trigger, but runs aground because of the changing table problem.

    The second problem that I need to overcome is that none of the stuids can have the ModuleID where total value of more than 120 credit credits. Credit value is stored in the table of mv.

    Thank you very much in advance for any help.

    Use a statement-level trigger:

    First of all, I need to try to overcome the problem of table mutation ensure that stuid = S1 in table its can not take the two moduleId M5 and M6.

    SQL> create or replace trigger sa_trg
      2  after insert or update on sa
      3  declare
      4  c number;
      5  begin
      6    select count(distinct moduleId) into c
      7    from sa
      8    where stuid = 'S1'
      9    and moduleId in ('M5','M6');
     10    if c > 1 then
     11       raise_application_error(-20001,'S1 on both M5 and M6!!');
     12    end if;
     13  end;
     14  /
    
    Trigger created.
    
    SQL> select * from sa;
    
    ST MO
    -- --
    S1 M1
    S1 M2
    S1 M3
    S2 M2
    S2 M4
    S2 M5
    S3 M1
    S3 M6
    
    8 rows selected.
    
    SQL> insert into sa values ('S1','M5');
    
    1 row created.
    
    SQL> insert into sa values ('S1','M6');
    insert into sa values ('S1','M6')
    *
    ERROR at line 1:
    ORA-20001: S1 on both M5 and M6!!
    ORA-06512: at "SCOTT.SA_TRG", line 9
    ORA-04088: error during execution of trigger 'SCOTT.SA_TRG'
    

    The second problem that I need to overcome is that none of the stuids can have the ModuleID where total value of more than 120 credit credits. Credit value is stored in the table of mv

    SQL> create or replace trigger sa_trg
      2  after insert or update on sa
      3  declare
      4  c number;
      5  begin
      6    select count(distinct moduleId) into c
      7    from sa
      8    where stuid = 'S1'
      9    and moduleId in ('M5','M6');
     10    if c > 1 then
     11       raise_application_error(-20001,'S1 on both M5 and M6!!');
     12    end if;
     13
     14    select count(*) into c from (
     15    select stuid
     16    from mv, sa
     17    where sa.moduleid=mv.moduleid
     18    group by stuid
     19    having sum(credits)>120);
     20
     21    if c > 0 then
     22       raise_application_error(-20002,'A student cannot have more than 120 credits!!');
     23    end if;
     24
     25  end;
     26  /
    
    Trigger created.
    
    SQL>   select stuid, sum(credits)
      2  from mv, sa
      3  where sa.moduleid=mv.moduleid
      4  group by stuid;
    
    ST SUM(CREDITS)
    -- ------------
    S3           30
    S2           80
    S1          100
    
    SQL> insert into sa
      2  values ('S1','M4');
    
    1 row created.
    
    SQL>   select stuid, sum(credits)
      2  from mv, sa
      3  where sa.moduleid=mv.moduleid
      4  group by stuid;
    
    ST SUM(CREDITS)
    -- ------------
    S3           30
    S2           80
    S1          120
    
    SQL> insert into sa
      2  values ('S1','M7');
    insert into sa
    *
    ERROR at line 1:
    ORA-20002: A student cannot have more than 120 credits!!
    ORA-06512: at "SCOTT.SA_TRG", line 20
    ORA-04088: error during execution of trigger 'SCOTT.SA_TRG'
    

    Max
    http://oracleitalia.WordPress.com

  • Storage of the data in a table problem

    Hi guys,.

    I have the following schema:

    < xsd: element name = "Details" type = "DetailsType" / >
    < xsd: complexType name = "DetailsType" >
    < xsd: SEQUENCE >
    < xsd: element name = "count" type = "xsd: Integer" / >
    < xsd: element name = "loop" type = "xsd: Integer" / >
    < xsd: element name = "test" type = "xsd: Integer" / >
    < xsd: element name = "test2" type = "xsd: String" / >
    < xsd: element name = "test3" type = "xsd: String" / >
    < xsd: element name = "ReceiptArr" type = "xsd: String" maxOccurs = "unbounded" / >
    < / xsd: SEQUENCE >
    < / xsd: complexType >

    where I said ReceiptArr in a table.

    I try to copy the data in the table, but it does not work.

    I want the data to be like that

    ReceiptArr [1] = 12345
    ReceiptArr [2] = 23456
    ReceiptArr [3] = 78900
    .
    .
    .
    etc.


    Here is my statement copy of bpel


    < copy >
    < expression = "ora:getNodes ('receiveInput_Get_InputVariable', 'CashReceipt', concat ('/ ns2:CashReceipt / ns2:Detail [', bpws:getVariableData('DebtorVar','/ns9:Details/ns9:loop'),'. / ns2:receipt_number'))" / >
    < variable = "DebtorVar."
    Query = "Concat ('/ NS9:Details / NS9:ReceiptArr [', bpws:getVariableData('DebtorVar','/NS9:Details/NS9:loop'),']')" / >
    < / copy >

    and it fails, does anyone know how I can complete my table in bpel?

    Thank you
    K

    Hello
    I had to do in the past, and this is the approach I used. Create two variables, one for a number of records and the other as an index of the loop. The index of the loop the value 1 and get a number of nodes in the xml data in the entry for the second variable. Then the loop through the input xml data while the loop index is less than the record number, set the value of your table and incrementing the index of the loop, the use of brackets around the loop index (i.e. open close bpws:getVariableData('Variable_loopIndex') of the angle. I see that when I post this message, this part of the code is eating, and in my browser at least when I replace the ASCII for support, it is displayed instead of the media.

    There might be better ways to address the issue, but it worked for my process. I have not tested the below with your types to xml schema, but here's an example of how this can stand as a model using my code:











    condition = "bpws:getVariableData('Variable_loopIndex') < = bpws:getVariableData('Variable_recordCount')" > "

              


    Query = "/ ns2:CashReceipt / ns2:Detail / ns2:receipt_number [bpws:getVariableData('Variable_loopIndex')]" / > ""

    Query = "/ ns9:Details / ns9:ReceiptArr [bpws:getVariableData('Variable_loopIndex')]" / > ""









    Hope this helps
    Candace

    Published by: cmcavaney on June 25, 2009 08:26

  • manipulation of the table problem

    I'm using Labview 2009 and I have a problem with windows... I have to implement the following code in Labview (X and digital input boards):

    for (i = 0 to MAX (X)) {}

    If (X [i] > (X [i-1] + 1)) {}

    X.Add (X [i], X [i-1] + 1) / / add the value X [i-1] + 1 x [i] position of the X table

    Y [i] = 0

    }

    on the other

    Y [i] = Y [i]

    }

    If I try to add items in the original array Y with the function 'Replace subset of table', the output array is not changed by the VI. If I try to initialize and to build a new table, I get a matrix of zeros. Can someone help me?

    If you want to just add 0 to the index that does not exist in X [] then try this.

  • store the output to a table

    This one should be easy, so I'm a little ashamed. I have a script that queries our storage and for each host returns the result in the form of:

    name value2 value3 value4
    name value2 value3 value4
    name value2 value3 value4
    etc...

    Thus, each line represents a host and each value is a property of this host, name, initiating group... and so on

    I am trying to find a way to put this information in a table, chopping whatever, so that I could get the values 2, 3 or 4 simply by providing the first value (name).

    Why channel output to out-string?

    He gets rid of the power of Powershell objects named!

    You ask your storage space by using the PowerShell cmdlets?

    In this case it returns objects.

    Put objects in a hash table using the name as a key like I did in my previous answer.

    When you're stuck with strings, use the method. split() to split the string.

    Use the array of strings to the method. split() to create a custom object.

  • Pagebreak table problem

    Hi all

    I'm working on a project that takes the mif generated from framemaker (FM) file as input file and perform a top treatment to generate the required output file. one of the requirements of the output file is that it should be the same line number and pages that appear in the framemaker file.

    I am facing a problem when a table is divided into two pages in the framemaker. I convert the framemaker mif file. It doesn't generate any information related to a page break in the table of the mif file.

    Any help?

    Concerning

    Ather

    Hi Lucie...

    Each page (page frame) that contains a text stream will be a block of text it contains. I think that you will need to check for the first object in this block of text to the line you are looking for. Hand, I'm not sure that a line can be the 'first' object on a page... you might have to dig through some other items before we get to the line (it could be the first object... I am not able to look at that model right now so don't know).

    If you need further assistance FDK, you might consider joining the group Yahoo "frame_dev"...

    http://tech.groups.Yahoo.com/group/frame_dev

    See you soon,.

    .. .Scott

  • Spry dynamic dataset table problem

    We are running in a quirk of Spry that we can't seem to make it work.

    When we create a data set of an XML file on the web server, a Spry table using this dataset displays correctly and is as it should be. But when we create the same group of XML data from a php/asp script on the web server, the Spry table flashes the model for a fraction of a second, and then deletes them. Web pages that contain the data sets are identical except for the source used by Spry.Data.XMLDataSet. No matter where he gets to it, the XML is identical. The XML file that we use has been generated by recording the output of the php/ASP script. The XML source file works, but the source script does not work.

    Example code:
    XML source: (this is generated by st.php and saved in st.xml, model based on DW CS3 Spry documentation)

    <? XML version = "1.0" encoding = "utf-8"? >
    <>sets
    < Game >
    < user_id > ZZZZ < / user_id >
    < grp_id > ABCD < / grp_id >
    < / set >
    < Game >
    < user_id > ZZZZ < / user_id >
    < grp_id > EFGH < / grp_id >
    < / set >
    < / sets >

    HTML: (here, everything is generated as DW CS3 has created, starting a new html file)

    <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
    "" < html xmlns = " http://www.w3.org/1999/xhtml ' xmlns: spry ="http: /ns.adobe.com/spry">
    < head >
    < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
    < title > Untitled Document < /title >
    < script src = "SpryAssets/xpath.js" type = "text/javascript" > < / script > "
    < script src = "SpryAssets/SpryData.js" type = "text/javascript" > < / script > "
    < script type = "text/javascript" >
    var DS1 = new Spry.Data.XMLDataSet ("st.php", "sets/set");
    < /script >
    < / head >
    < body >
    < div spry: region = "ds1" >
    < table >
    < b >
    user_id < th > < /th >
    < th > grp_id < /th >
    < /tr >
    < tr spry: repeat = "ds1" >
    < td > {user_id} < table >
    < td > {grp_id} < table >
    < /tr >
    < /table >
    < / div >
    < / body >
    < / html >

    -note: the "xmlns: spry" in the code above has an extra space between the slashes - I added that because the preview kept adding tags additional head in the middle of this address...

    The above html code uses "st.php" as a source for the dataset, and the only difference between the two tests is to change the source to 'st.xml '. I tried to look in all the documents that I can find, and the CS3 code corresponds to all the examples for the use of XML or a set of data source php/asp. Documentation seems to assume that it should simply work little matter that I use as a source as long as it outputs xml, which is what I do. I can check if the output itself works well because it made when registering in a direct xml file. Also, if I try to build the dataset schema, DW correctly interprets the output of the php script, exactly as it does when generating the schema from the xml file.

    We get this behavior if use us IIS, Apache, php, or asp, IE or Firefox. Obviously we are doing something wrong somewhere, but I can't find others with this problem, I can't find any options that could correct. Anyone has any ideas what could be the problem?

    "FSchwalm" wrote in message
    News:f1cq7h$KGM$1@forums. Macromedia.com...
    > Get us this behavior, if we use THE IIS, Apache, php, or asp, or
    > Firefox.
    > Obviously we're doing something wrong somewhere, but I can't find
    > other
    > having this problem, I can't find any options that could correct.
    > Everyone

    > have any ideas of what could be the problem?

    You must use the ASP/PHP code to configure the mime type of the XML file as
    "application/xml".

    --
    ----------------------------
    Massimo Foti, programmer web-rental
    Tools for ColdFusion and Dreamweaver developers:
    http://www.massimocorner.com
    ----------------------------

  • Storage in 6 64 GB iPhone problem

    All of a sudden more than 30 GB storage was filled without applications or documents and showing "full storage.

    After removing several apps, about 7 GB free, but in a few minutes, once again used space automatic watch. Through iTunes, more than 70% Watch space occupied by Documents and data, but there are no documents or data. I am also unable to access messages, as his farm automatically down just after the opening.

    Please suggest me what to do?

    Restore your iPhone from your backup and see if that fixes the problem. Looks like you have a corrupted file.

  • Video output Qosimio G20 S problem - NTSC TV

    Hi all

    I have a Qosmio G20-110, bought in the United Kingdom and problems of video output via the S-video cable to a flat TV in US I have the image but it rolls down very quickly. When he does that, I played video clips AVI on windows media player. I followed the Nvidia Setup program to get the result on portable computer LCD screen and tv screen synchronized, and that's ok, except for the picture of rolling. I don't know if there is a problem with the NTSC output - is this still a problem when watching digital videos on your laptop? - or if it's a different kind of problem. Any advice much appreciated.

    BTW, I read elsewhere on the forum that the media center TV works in the country of purchase - not the case with my laptop, I've watched television successfully both in the United Kingdom (PAL system) and the United States (NTSC system).

    Is it possible to check or change the type of output via s video cable?

    Hello

    I have no experience with a standard NTSC TV but AFAIK the PAL signal supports 50 Hz and supports the NTSC 60 Hz signal.
    Maybe it has something to do with your problem.

    You will find the detailed description:
    http://en.Wikipedia.org/wiki/NTSC

    However, in your case I would recommend BISO settings.
    In many of the BIOS version, you can pass the video parameters between NTCS and PAL.

    PS: I recommend you to test the video output also on different TV s to make sure this isn't a TV related issue.

    Good luck

  • MS Office report Express VI and table problem

    Hi all

    I have a strange problem with MS Office report VI, which is included with the report generation tool. I created an Excel template that I linked, according to the preference "Custom template for Excel" and all the named ranges. However, two of the named ranges that I entered are 1 d arrays of doubles. Now the problem:

    When I entered the berries to their specific name range (it's only 6 values), instead of simply enter the values in the table in the cells he entries like this:

    A value of 0

    1 value

    2 the value

    ...

    6 value

    He pushes the 'value' to the column next to the beach of name because of 0-6.

    He does it with two tables so it screws to the top of all formulas. Anyone know how to remove the 0-6 and simply enter the values?

    Thank you all

    The Express VI are easy and convenient, but some costs. Since the Express VI can also accept a waveform entry, you have to accept that it will add a channel name.

    With the tool report generation (who are also its limits), it's easy to add only the data you want:

    Ben64

  • simple table problem

    I have read some data from a text file and form a table according to my requirement (the illustrious photo attached).

    What my problem was when I used this table in an other vi through the connector components, all the lines in the resulting table the width of the line of maximum size, and are filled with zeros.

    How do I remove it? I need the lines ending with its own values, here in my case two first rows should have 5 items in the table, the elements of line 7 third and so on...

    Your VI makes no sense. Why not autoidenxing? Why "delete from table?

    Here's a simple possibility (just to write the resulting string in a file).

  • Table problems

    Hello OR Forums, I currently develping a VI to specify the tensions that will be send to the device that will run two mirrors. The idea and the configuration are pretty basic, but programming, it's a question. Matrices X and there are elements that correspond to a point located on a network of coordinates. For example, maybe my items in my grid for X [-2, - 1, 0, 1, 2] and my Y could be [-2, -2, -2, -2, -2]. However, the problem is that I need a larger value of X and Y for I could resign in the grid and reassemble in table X. For example, will be my next line of items [-2, - 1, 0, 1, 2] X and [-3, - 3, -3, -3, -3] for Y. However, how my program is written my last value of is less than the previous item. Thus, ideally I would form a table that would have an extra X element that corresponds to the step down in voltage on the axis Y. This would be ideal: [-2, - 1, 0, 1, 2, 2] x and [-3,-3,-3,-3,-3,-4] for y.

    Sorry for this question is a bit bad made. The application of this program is quite simple, but it seems to me a bit puzzled.

    If you want to start (start X, start) then continue to start X + step X, start. Continue (Start, X, Y). Then go to start X, Y + step start o and increment in X. Repeat for all the table again.

    Is that a correct understanding of what you want?

    If so, you can do this with a picture of the X values and an array of the values, or even with no tables at all.  Create a State with the States for Scan X machine, trace, and no matter what States are required for initialization and shutdown.  Have two shift registers to track the values X and Y or indexes. Whenever you increment X through the State X Scan. When X reaches the maximum value or the index reached the last X, change the State to trace. It increments Y and restores X X start or equivalent for the index. When you reach Max X and Y of Max, go to the State of clean shutdown or restart.

    No complicated manipulation table required.

    Lynn

  • Edge of metering size buffer/table problem (VC ++)

    Hello

    Accidentally, I posted this in the multifunction DAQ forum so forgive me for posting this again here.

    I'm trying to make an edge stamped with PCI-6115 of counting for the application that I'm developing.

    Ideally, I initialize a buffer array, then use a sample clock time and acquire the values of a counter which will then be stored in a buffer.  After a number of samples, I would then use the DAQmxReadCounterU32 function to extract this data and perform calculations.

    However, windows gives me an error when I try to initialize the size of the stamp of table is larger than 255001, I need 264000 +.

    Essentially, it seems that only this part of the code to execute:

    error int = 0;

    TaskHandle taskHandle = 0;

    TaskHandle taskHandleCtr = 0;

    given uInt32 [260000];

    After trying initialize the array of uInt32 my program crashes saying there was an error with my exe with a popup asking me if I want to send an error report to Microsoft.

    That would be a problem of windows not afford to allocated more 255000 32bits samples for this table?  If so how can I put the table on the memory embedded amount?

    Sorry guys, it actually had nothing to do with the DAQ card.

    He was apparently C++ that limits the size of the array that I called him, which was the traditional "int a [size]".

    I used this rather to solve my problem:

    int * a = NULL;
    a = new int [10000000];

    Problem solved.

    Sorry for posting in the wrong forum and thanks to all who read this.

    Howard

Maybe you are looking for