Storage space does not connect to a drive

Similar Questions

• Storage space does not add correctly?

  Last September, I tried to download a zip file of 1.3 GB. Download appeared at the end, however, he never appeared in the cloud. I have posted about this problem and see the space occupied. At the time where space has been estimated in the Trash because I had not permanently deleted from the trash and he had a lot of files, and since the file don't was not there I assumed that the download failed.

  This brings us to today, according to the website of Creative cloud I have 6.7 GB of storage space currently used. However, if I add what I have stored in there I can't 5.5 GB of storage used. I thought maybe it was the trash, or archive, and when I look, there is no files in archive that I have deleted recently (when I finally deleted archive files do not have more than 100 MB).

  Is it really this 'missing file' and not do not show? Why I see a difference in storage space?

  Thanks for any help!

  We have fixed the problem.

• ScanJet Pro S3000 S2: HP Easy Scan does not connect to Google Drive

  Everyone knows a problem, try to scan directly to Google Reader using the HP Easy Scan software?  I had HP Easy Scan Setup for about a year and I configured Google Drive in v1.0.7.0 HP Easy Scan and it worked until recently.  I have not activated double authentication Google and Google Drive works locally on my PC.  So I know that my Google credentials are correct.

  When I try to configure Google Drive in HP Easy Scan to choose a folder of cloud, I get an "Unable to connect" error HP Easy scan.  I tried this on two different computers.  It did not work so I tried a workaround solution.

  Scan temporarily to Google Reader using the Easy Scan software I had to add another shortcut to scan in Easy Scan is called a record.  I had also installed the version PC Google Drive, so that I can do refers to a folder on my pc and have it sync with Google Drive in the cloud.  Then I pointed out Easy Scan folder.  Now I can scan to Google Drive again.  It's a work around unnecessary in my mind to make it work properly again.

  I guess that Google has done something to their routine of authentication and HP Easy Scan is not compatible with this change yet.

  Scanning documents directly to Google Reader using HP Easy Scan is resolved if the software is updated to HP Easy Scan v1.0.9.0.  HP has released a update for Easy Scan and it can be found on the HP Support site by clicking here.  v1.0.9.0 was published on July 30,2015.  Once you download and install the update, scan direct to Google Drive from inside HP Easy Scan won't work correctly once again, as he did in v1.0.7.0 before security update by Google.  I hope this helps!

• Mac Pro 2013 does not connect to the hard G technology drive

  Hello

  I recently bought a Mac Pro and I am trying to transfer files from my hard drive mini 1 TB of G technology itself. The files came from a backup who was recently transferred to my 2011 macbook pro. I tried using cord USB 3.0 for the Mac Pro doesn't have a firewire plugs, but it does not recognize my hard drive. The hard drive is not showing any signs of work because I don't hear the fans turn on the player. The hard drive connects perfectly to my macbook pro via firewire, so should I buy a bolt of lightning for this firewire adapter? I really hope that I don't need to buy a new external, but I'd love to hear a few options for this issue, it would be greatly appreciated.

  Best regards

  May be that the USB port does not provide enough power. Sabrina drve is provided with a plug that allows to connect a plug to an AC wall power supply.

  The manual

  http://www.g-technology.com/sites/default/files/fields/field_files_pdf/product/g-drive_mini_3.0_usermanual_r3_1015.PDF

  Neither the Web site

  ve http://www.g-Technology.com/Products/g-Drive-Mini-1-TB-External-Desktop-Hard-DRI

  give the voltage of power

  It works via the USB port on your MacBook? The USB part is maybe defective.

• Why is my Apple - Super Drive CD does not connect to my iMac?

  Why is my Apple - Super Drive CD does not connect to my iMac?  That was before I upgraded to el Capitan.  Now it will not allow CD insertion and the icon does not appear on my desktop.  However, the device is displayed in the Finder and seems to rest for more than 15 minutes, try to connect.  Any advise appreciated.

  try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• Atheros AR9285 in CQ61-410US wireless network card does not connect to the Internet after the update of the adapter driver

  I have a Compaq Presario CQ61-410US (WA974UA) which is equipped with an Atheros AR9285 B/G/N wireless network adapter.   The laptop Internet access was fast and stable when using a Wi - Fi N.   Its pilot AR9285 was the initial version of the 8.0.0.172 factory.  But because there were so many subsequent driver updates, I've updated the display driver version from the support page 8.9.9.316 (sp48755.exe).  However, after updating the driver, I immediately lost Internet access.   The laptop is running Windows 7 Home Premium with Service Pack 1 and 64-bit.

  The driver seems to be installed OK, but it does not connect to the Internet.  Here is the status of the driver: 1) in Device Manager it appears OK and is presented as working properly.  (2) in the results of IPCONFIG/all, it there is no entry for the wireless adapter and without IP addresses are affected.  Here are the results of the IPCONFIG/all command:

  C:\Users\Karen>ipconfig/all

  Windows IP configuration

  Name of the host...: KarensLaptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:
   
  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  Description...: Realtek PCIe FE Family Controller
  Physical address: 00-26 - 9th - JJ - 83 - 9 c
  DHCP active...: Yes
  Autoconfiguration enabled... Yes

  Tunnel adapter isatap. {E52D6F3E-5080 4B3B - 8BE7 - B7CFD7E137D1}:

  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Microsoft ISHTHP adapter
  Physical address: 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Auto connection...: Yes

  Map of tunnel Teredo Tunneling Pseudo - Interface:

  State of the media...:...: media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Teredo Tunneling Pseudo - Interface
  Physical address.... : 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Karen >

  (3) Trying to Connect through connections network does not a list of known available networks and instead says "not connected - no connection is available."

  I have read several messages from the HP Forum and tried a lot of things, including the installation of various updates driver later thanks to the version 10.0.0.222, but I still can't the driver to connect to the Internet.  I also changed my router "n" has only B/G as the AR9285 pilot has a history of problems with Wireless N.  Even back to the original driver version 8.0.0.172 provides an Internet connection.

  Any advice would be appreciated.

  Hello:

  I'm glad that you were able to restore your internet connection.

  I'd go with the latest driver HP vice one from another source.

  The only time wherever I go outside HP for wireless network drivers is if you have an Intel wireless card.

  My recommendation is to use the free MS Security Essentials antivirus/antispyware, which never interfere with how "things important works" on your PC, such as network connections.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Your router with a hardware firewall and a software firewall Windows. I don't see the importance of adding other firewalls.

  Unless you have a lot of albums secret info on your PC that pirates would like to get my hands on, these fully functional security roadblocks are adequate for most of us.

• Windows 7 backup function does not recognize the external drive connected to the wireless router

  I installed a Belkin router for my laptop and pc, it came with a usb port so that I can connect my external hard drive directly and share it as a backup drive.  But when I tried to set up in Windows 7, the backup options list.  The network recognizes it, but Windows will not let me select it as backup destination.  A buddy of mine said that the backup of Windows 7 does not work with network drives, but no matter who else thought of it?  Thnx.

  It depends on the flavor of Windows 7. The Home Premium version will not network disks, backup but the Ultimate version. You can connect your drive as a USB drive when you make your backup.
  _________________________
  ID #0316. If this answer was helpful, you can vote by clicking on the green triangle. If it solves the problem, click 'propose as answer. Thank you.

• WIN 7 does not have the net driver for Asus A2D WHAT CAN I DO. I HAVE THE CONNECTION TO THE LOCAL NETWORK.

  WIN 7 does not have the net driver for Asus A2D. or I'm unable to find it.
  WHAT I CAN DO. I HAVE THE CONNECTION TO THE LOCAL NETWORK.
  Thanks for any idea, address etc.
  DragMil
  You can wito to * address email is removed from the privacy *.

  Try an older driver installed in compatibility mode

  To run in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > choose OS

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

• My printer driver does not connect to my new laptop

  Original title: too old printer?

  My printer driver does not connect to my new laptop it says my hp7150 is a usb device that is older and may not work with usb 3 try usb 2?

  Hello

  You should be able to operate...

  Did you install the software for your printer, or just plug in?

  You can actually have more luck with the USB 2.

  I think your laptop would have at least a USB 2 port. Glance to one that is not blue...

• I purchased Adobe Lightroom 5 who arrived on a disc.  My new computer does not have a D drive (for dvd or cd).  I'll be able to download my Lightroom 5 on my new system via an online connection?

  I purchased Adobe Lightroom 5 who arrived on a disc.  My new computer does not have a D drive (for dvd or cd).  I'll be able to download my Lightroom 5 on my new system via an online connection?

  Sure.

  Download it from

  Adobe - Lightroom: For Windows: Adobe Photoshop Lightroom 5.7.1

  Adobe - Lightroom: For Macintosh: Adobe Photoshop Lightroom 5.7.1

  Install and enter your serial number.

• Used to boot Windows - does not recognize the hard drive

  Hello. I had my computer laptop vostro dell for 5 years, and I've never had a problem. A few weeks ago, I was starting, and I got the blue screen of death. I had the same thing when I rebooted. I bought a SATA dock for recover my files, so I could format it and start from scratch. However, the dock does not detect my HARD drive, although I hear the disc running. I tried to connect a Dell Latitude docking station to transfer the files, but the Latitude does not recognize my HDD ether. Vostro runs XP Home Edition and Zorin OS, Latitude anime XP Pro. HHD in question is a 120 GB Western Digital Scorpio for drinking devices. Help, please.

  You boot from the disk and choose "Try without Unbuntu and change to your computer"?. Honestly, it looks that you have installed. In addition, using raid with Windows Xp support?

  If you have chosen to 'Try' Unbuntu I recommend now you run chkdsk /r from the recovery console. The problem is not with the hard drive probably, but with the file system.

  Download WIndows Xp Recovery Console from HERE. Save the file to your desktop. You will need to burn the iso image to a blank cd using the same way you did to the image ISO of Unbuntu ImgBurn. Although the instructions below refer to a Windows disk, the disk from the Recovery Console that you create will do the same.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

• My computer does not recognize my CD drive

  I have:

  went to hp support and did all the solutions available including:
  -check the devices for the player manager, looked for an updated driver.
  -check the BIOS to see if the disc is recognized and is not.
  Windows does not recognize my cd drive at all anywhere in my system, and BIOS is not either.
  I have no idea where the cable on my cd rom drive is at all so I feel not comfortable to verify if the drive is properly connected. I know that the reader was one for a long time until a few months ago and the cd player turns on and eject when I hit the button manually... so the power supply is plugged.
  Anyone have any ideas?

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• LaserJet P1102W: [RESOLVED] LaserJet P1102W does not connect to a wireless network on Mac

  UPDATE: the below solution worked on my MacBook, both running El Capitan. Ignore the instructions provided in the manual of the P1102W and follow the steps below.

  I have a P1102W printer.

  Recently my LaserJet P1102W refuses to connect to networks using WPA Wireless.

  As it does not have an IP address, I can't access the web server.

  She also does not connect to my Mac Wireless via Bonjour. The printer will install when connected via USB.

  I installed printer HP Apple drivers, that contains the P1100 driver.

  The P1102W worked before wireless. I only noticed this anomaly since installation El Capitan and moving the printer to another room with my workstation.

  I need the printer to use the wireless network, as I did not have enough space on my desk for him. And I just can't place it anywhere within the range of a USB cable.

  Are there alternatives to this?

  Hi @rcosgrove,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems connecting your Laserjet P1102w printer to your network wireless using your Mac computer. I can help you with that.

  First of all, I would like to mention that it would be easier to the printer connected to your network using a Windows PC. If you can't borrow or use a Windows PC, the following steps should allow you to connect the printer. If you can borrow a PC, please let me know what version of Windows and I can provide a link to the drivers to configure the printer automatically.

  Preparation of the printer

  1. Turn the printer off.
  2. While the printer is turned off, hold down the two buttons on top of the printer.
  3. Hold the buttons on top of the printer and the printer.
  4. Hold down the maintained for even 10 seconds.

  Wireless printer setting

  1. Make sure that the printer is connected to your Mac via the USB cable.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Click the icon of your printer on the left.
  4. Click Open print queue, printer installation, utility of printer, open printer and HTML Config utility.
  5. (If the above step generates an error, change your default browser on Safari. Please let me know if you need assistance with that).
  6. In this new window, click on the networking and wireless tab on the left.
  7. Under Mode of Communication, select Infrastructure.
  8. Select your network from the list and then click on the button with the arrows.
  9. Under Security Mode, select WPA/WPA 2. If you have an old router, you may need to select WEP instead.
  10. Enter your password wireless in the field below.
  11. Click on apply.

  Now, wait a few minutes. Your printer must change to have a solid blue light. If it is not the case, either the password has been entered incorrectly or there is a setting on the router that the printer is having a resolution of the issue. Please let me know if this is the case.

  Once you have a solid blue light:

  1. Unplug the USB cable.
  2. Return to the printers and Scanners.
  3. Hold down the CTRL key and click the icon of the printer on the left.
  4. Click on reset printing system.
  5. Click on the button "+" in the lower left corner.
  6. In this window, select your printer in the list.
  7. Click in the box next to and select your printer from the list.
  8. Click on Add.

  Please let me know if you are able of print or the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• WD Pass Ultra does not connect to MacAIR

  Hello

  I have a MacAir 2012, running the latest software including El Capitan... last night, I have connected my WD My Passport Ultra to the laptop computer and left overnight to back up via Time Machine. In the morning, when I opened the computer not only had the back towards the top do not run, but the drive has ceased to appear in the Finder.

  I restarted laptop, Finder, reset the PRAM and SMC, and tried to open utility disk - which does not start upward and only do so if I disconnect the external hard drive. I have connected the player to a desktop Windows PC and player controls indicate the hard drive works fine. In ADDITION, when you are connected to a Mac the drive spins and flashes indicating power going through so I can not think that it is a cable problem.

  Can someone help me please? Disk utility does not start if the drive plugged in, so I can't unmount/mount... Held the WD driver manager and who is stuck at 90% so I try to leave it overnight to see if that solved the problem.

  Would appreciate any comments.

  Thank you

  Jean-Pierre

  Omaahm wrote:

  Disk utility does not start if the drive plugged in, so I can't unmount/mount...

  I always recommend any new drive formatting, to ensure that all proprietary software are removed, e.g. Manager of drivers WD

  After you start DiskUtility then plug in your WD drive, you can try to force mount

  DiskUtility > file > install

• iTunes does not connect with my iphone 6

  I updated my phone and itunes for recent versions, and when I try to connect my device with itunes, it does not connect. My computer says that my phone is connected but my itunes doesn't work. When I connect my phone, a notification appears saying "allow this device to access the photos and videos? Nothing appears saying "approve this computer? I restarted my computer several times and my phone but it still does not connect. I tried the update of the driver portion, but he says it's updated, but when I go to view the file "Apple Mobile Device USB Driver" it does not appear on my computer.

  Have you tried the following steps:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  If so, you may also want to see excellent iTunes to turingtest2 for troubleshooting Windows guide to:

  Troubleshooting problems with iTunes for Windows updates

  especially the chapters containing Apple Mobile Device Support.