StorE Alu2: two ports USB ports or not?

Hi all

I can't understand that the series of external hard drive StorE Alu2 takes 2 USB ports, to work or not.
There are two exams in the Amazon saying it does:
(OLE http://www.amazon.co.uk/gp/product/B00472861W/ref=s9_simh_gw_p147_d0_g147_i1?pf_rd_m=A3P5ROKL5A1 & pf_rd_s = center-2 & pf_rd_r = 0VS71D4V6ZDJWW3JSKA6 & pf_rd_t = 101 & pf_rd_p = 467128533 & pf_rd_i = 468294),

but there is no confirmation of nowhere elsewhere.
Even the manual States produced with all the letters that he only use a single USB port
(http://www.toshiba-multimedia.com/eu/store-external-hard-drives/alu-2-25/).

Anyone able to help?

Thank you!

> Manual States even produced with all the letters that he only use a single USB port
> (http://www.toshiba-multimedia.com/eu/store-external-hard-drives/alu-2-25/).

Page Multimedia Toshiba says it supports a high speed USB 2.0 ports and you can see from the photos on this page.

> I can't understand that the series of external hard drive StorE Alu2 takes 2 USB ports, to work or not.

I think it depends on the USB ports on the computer/laptop.
The common standard USB should provide 500mA but this may be different and in this case the USB hard drives would not get enough power to operate correctly. In this case, you need a Y USB cable to connect an external USB HDD to two USB ports.

Tags: Toshiba

Similar Questions

  • Satellite U400 - two of the three USB ports are not working

    Hello

    I have laptop Satellite U400 who has three USB ports.
    One of these 3 ports does not work correctly and the other two ports do not work.
    Is there anyone to show me any solution?

    Thanks in advance,
    Concerning

    Any solution? You mean a magical solution? :)

    No one knows the configuration of the laptop.
    No one knows what OS you are using.
    Nobody knows what you did last time with your laptop.
    No one knows how long you have this problem.
    No one knows what are the USB devices that you use to test USB functionality.
    What you have already tried to do about it?

    You want to have more questions?
    Maybe you should write more than three short sentences as a description of the problem.

  • How I fixed my USB ports not working not problem. Two ports left side previously does not... HP Dv7

    So I do not know what is not "where it will honestly, but put there just to try to help someone else who has struggled with this as long as I did it...» I ended up having my two USB ports on the left side (turned out to be my 3.0 ports) working again when they recognize nothing. I could use the USB 2 on right 2.0 ports, but the transfer rate was terrible.

    My answer on another question where someone had a similar problem... good luck!

    'Hi. '

    Not sure if this will help, but I had the same problem, the two ports on the left did not work on my Dv7. All this time I thought that the USB on the right were my 3.0 ports so I thought that would be nice, but it's been over a year that I initially had this problem and made a bunch of maintenance of the system meant that I would look through it again. In any case, I went to the Device Manager through the computer management tool. I know that you can go straight to the Device Manager, but just give you exactly how I did it. You can search just to start computer management.

    So I chose Device Manager in the menu on the left side and it looked like ordinary Device Manager. Went down to Universal Serial bus controllers... at this stage, I watched the action menu on the right and select more actions, opinions and you click Show hidden devices. After that I went through my USB controllers one by one as I had done many times before and checked them, tried the update of drivers, etc... Under the USB controllers Section, I noticed something like xHCI Host controller of compliance Test... I right click it and went into its details, I tried the driver updated and installed the new driver. 2 new USB controllers immediately arises: Renesas Electronics USB 3.0 Host Controller and root hub.

    Switched on a test drive from the right thumb to the left and the computer instantly recognized and installed the driver for the stick.

    And that was all... hope it helps even if this is later. "

    Hi @klark1kent,.

    Thank you for visiting the Forums Support HP's, welcome and thank you for the important information.

    Have a good week.

    Thank you.

  • HP 8460p left two USB ports do not work.

    Hello

    After a motherboard replacing the left two ports of the laptop don't work. AMT is enabled, DMI is correct, BIOS is the latest UEFI value by default, enabled USB ports in the BIOS. What I was asking, the funktion of the ports support work, but I can't begin with my USB stick or windows diagnosis 7 recognizes this device. (tested with different USBdev.)

    What could I have forgotten?

    THX for the help.

    It seems that if that was the problem. In the next few days, I can verify this.

    Thanks a lot for all indications.

    JP

  • My USB ports do not work.

    Hello
    Yesterday, I bought a brand new printer, implemented, it was working fine, and then it just stopped. So I fought a bit with her, decided the printer was defective and would resume and put it out to a new, and meanwhile put my printing task on my jump drive and bring it to our local printing store. However, when I put my jumpdrive into the USB port to transfer the project, my computer would not my USB - stick. So now, I think that for some reason that my USB ports are not working. Why is this happening and how to fix it?

    Hello

    1 reboot to be sure nothing blocks the ports.

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------

    Then lets refresh the USB stack

    Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices

    Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
    plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
    for all instances

    Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
    UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

    This KB shows XP how to and the method of Vista is identical
    http://support.Microsoft.com/kb/310575

    ----------------------------------------------

    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Envy of HP Dv7 - 7223cl Windows 7 Ultimate 64 - Bit: USB 3.0 Ports will not work.

    When I plug my mouse into one of the USB 3.0 ports, Windows does not sound has indicated that it is connected. I did a clean reinstall there two days and most of my drivers installed, but they do not work. A store local deleted Windows 8 PC and installed Windows 7, a few weeks ago, and USB 3.0 ports was working at this time, so drivers exist. After having some problems, I decided to do a clean reinstall of Windows 7, which has deleted all my drivers and I was able to reinstall most of them, but USB 3.0 ports has not worked since and still not working. I looked on the internet, but I couldn't find the right one. I looked in the management system and found that two devices: PCI Device and SM Bus controller are shown with a yellow sign. After looking under properties, I found that the two do not have their drivers installed (Code 28). Anyone know where to find the drivers for this problem?

    Nevermind, it works now. I just had to uninstall and reinstall all components of AMD. Thanks for your information!

  • I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

    I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

    Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

  • NB200-12N - USB port does not work

    Hello

    I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
    Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
    But does not work.

    Thank you

    Paulo

    If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

    Try reinstalling the chipset utility.

    By the way: two other ports work well, right?

  • Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

    I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

    Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
    The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

    Plug the mouse on or off doesn't change anything. Only restart helps.

    Any ideas?

    It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

  • HP ENVY Beats all-in-One: usb 3.0 ports do not work

    USB 2.0 hubs work but the 3.0 have never worked. Thumb drives and exterrnal readers do not appear in the file manager. No problem, indicated in the Device Manager.

    Thank you for your help.

    After searching around, I found new info: F2 at startup - BIOS - HP has a tool to check if different parts of the computer are working correctly. (Officially), I learned that the usb ports two 3.0 do not work (despite Device Manager, telling all the devices work properly). I received a "failure code" and a phone number to call. Technical support has confirmed that the failure code indicated the 3.0 ports do not work, and for $215 they can repair (price including shipping Fedex).

    I see if someone locally replace ports. Not sure that 3.0 ports are worth anywhere from $215. After all, the computer works just fine as it is. It's just annoying, they have never worked, that it took so long to finally find a solution, and that the warranty has expired.

  • Satellite L875D: USB 3.0 ports do not work after decommissioning of Win8 for Win7

    Hello

    I got my OS of Win8 OEM for Win 7 Home Premium because Win8 is just not for me... Its a legal version of Win7 with a product key, storebought...

    The laptop is a Satellite L875D-10N, which I bought in September 13.

    Installation went well, except that 2 3 ports USB 3.0 no longer works.
    I can stil fresh my phone or other devices, but the laptop is not "see". Also, USB drives and other storage devices are not recognized.

    In the Device Manager the ar two ports under "other devices" and no driver is installed for them.
    I tried in different ways to find and install a driver, but it never works.

    Can someone help me with this? I would be very much greatfull!

    Kind regards

    Wilbert
    Amsterdam, Netherlands

    > In Device Manager, the two ports are listed in the "other devices" section and no driver is installed for them.

    Indeed the USB issue seems to be related to the missing drivers.

    You must install this driver USB 3.0:
    [Driver USB AMD v 2.0.7.176 Windows 7 - 64 bit: http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct 7534 = & selSh ortMod = null & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 3 & ID = 87792 & OSI D = 30 & driverLanguage = 42]

    In addition, you will need to make sure that this chipset driver has been installed too.
    The laptop supports the graphics chip ATI and AMD chipset. The chipset driver is the driver of ATI graphics card and this is why you must make sure that this driver would be installed too.

  • Lenovo G505 3.0 usb ports does not work with Win7

    Hello.

    I bought Lenovo g505 and installed Win7 Ultimate SP1.

    The left, two USB 3.0 ports do not work.

    I could not find the drivers for it.

    Help, please.


  • 23 - f217c: HP 23-f217c: USB 3.0 ports does not

    Hello, I have recently downgraded to windows 7 Professional for windows 8, and everything works fine except for the two ports usb 3.0 on the side.

    Anyone know where I can find the appropriate drivers for these ports? I tried these AMD, but I don't think they are good, because they do not work: http://support.lenovo.com/us/en/downloads/ds030088#os

    Thank you

    Hello:

    Download and install the AMD chipset drivers and restart.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  • USB port does not work

    The model of my laptop is HP Pavilion 2235dx g4. I use windows7 32-bit. It has 3 usb ports. It contains a usb port, it is just side & two others contain he left aside. In this way the usb port on the right side works fine but two other usb ports on the left side does not work.

    What can I do for this?

    Help me...

    Hello:

    Download and install the AMD Chipset drivers and reboot.

    You want the first file on the Web page.  To install the smbus and usb 3 controllers.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

    If you need graphics driver, AMD Beta driver should work for you...

    http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

  • USB ports do not recognize hardware

    I have a desktop running Windows XP and a few months ago he suddenly stopped to recognize the external hardware on 2 of the 4 USB ports.  The two other USB ports work.  Is this a software problem or could the two USB port went bad at the same time?  I plugged a USB stick in the USB work and it does not work, but the mouse I reconnect works very well.  This same USB works on another system.  I'm puzzled.

    Thanks for your help!

    I have a desktop running Windows XP and a few months ago he suddenly stopped to recognize the external hardware on 2 of the 4 USB ports.  The two other USB ports work.  Is this a software problem or could the two USB port went bad at the same time?  I plugged a USB stick in the USB work and it does not work, but the mouse I reconnect works very well.  This same USB works on another system.  I'm puzzled.

    Thanks for your help!

    If some ports work and others do not, it is most likely a hardware problem, not a Windows.

Maybe you are looking for

  • Satellite A200 - including details on BIOS 2.10 WIN

    I have the Satellite A200 1N7 with 2x512MB RAM. My maximum resolution of RAM is now 2 MB. I can to change 1x512mo by 1 x 2 MB. I can to install the new bios update (2.10 day WIN 19.02.2008). Is this possible?

  • HP G72 laptop: HP G72 DNS

    I checked a jury back and applied the information given, and I always feel a DNS error message. I'm not able to use Internet on my laptop and I use my phone, so apologies for not being able to show my specific settings.However, I am able to connect t

  • using search in win 7

    How can I use search in 7 looking for my other XP disks used to give a list of readers for the research, but only 7 seems to 'c '.

  • I need the date of the creation of my account

    I used to check the date of creation on my profile, I can't find it anywhere. How can I get the date of the creation of my account?

  • Cannot get my document of cloud

    I try to access my documents of cloud and it only that keep you trying to download, but the four boxes just blink and never download. Document on cloud issues?