Store files and backup at the same time
Hello!
We have a very good software measurement work written in LabView. However, we want to save the data files on a regular basis. We want to be able to do this, even during the measurement, and then the software is written in the files. Now, when we try to do, we sometimes face 'error 5 has occurred to replace/create/open file' (in 'write in a spreadsheet file') because another software (backup, windows stuff, otherwise...) accesses the files too. Now my point of view this type of file matching should not be a problem since LV is the only writing software in the files. There are 3 possible solutions that I can think of:
- delay writing (not possible because you don't know how long to delay, for example how long other software remains open)
- the data in queue and write on the next test (e.g. https://decibel.ni.com/content/docs/DOC-7212 - but once again; how long in the queue?)
- the good thing is; copy the temporary file to change temporary, delete the original and move the temp in this place
the last should be the right solution and also work on different OS since the copy/move stuff should be atomic operations and therefore safe in this context. However, I have implemented the solution and always have exactly the same problem but now in 'move the file '... I begin to doubt if it is possible to solve this problem at all and so desparatly need help here! I can see it is not lock, or mutex on file and no need to LV generate an error (I think it's done as a warning to future potential conflicts)... I guess that's a few hidden/strange evil documented Windows API 'characteristic' LV uses to detect the other access and it results in a behavior I can't change or fix - up to what to do here...?
Thank you very much in advance for helpful suggestions or advice! Greetings
Ursin Soler
I must correct myself here:
- TDMS has not help at all - has exactly the same issues
- only working solution at the moment is (protected) open the file start and keep this refnum open all the time until the program ends: reading and writing in the program can be done as before and ignore this protection refnum (open and close an another if necessary additional refnum) completely OR be implemented smarter and use the same refnum.
Hope this helps someone else too.
Using this method, I can now use for example MS robocopy to back up or all the data files in mirror while the LV program written in it. Something very fundamental and important for a recorder...
Greetings
Tags: NI Software
Similar Questions
-
How to play music and narration at the same time on windows movie maker?
I'm working on a project and successfully, I could put my videos for a song. to get all the points for the project I need to explain what is happening in videos. I have now that I need to tell and I was able to do it too. I don't know how to play the narration without stopping the music, I need narration and music at the same time. I know this is possible because I found...
You can add music and narration Audio / Music track in Windows Movie Maker. The two can play at the same time in your published movie. You can then adjust the audio levels to determine which audio will play louder than the other in your movie.
Please write again (:)
I'm working on a project and successfully, I could put my videos for a song. to get all the points for the project I need to explain what is happening in videos. I have now that I need to tell and I was able to do it too. I don't know how to play the narration without stopping the music, I need narration and music at the same time. I know this is possible because I found...
You can add music and narration Audio / Music track in Windows Movie Maker. The two can play at the same time in your published movie. You can then adjust the audio levels to determine which audio will play louder than the other in your movie.
Please write again (:)
=================================
Simple solution... Publish (save) your project in the
film format .wmv to a folder on your hard drive.Re-import the file .wmv (as a new project) and now
audio / music will be clear and you can add
the narration.John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Playback devices are turned on and off at the same time.
Somehow, my audio devices have all been disabled and enabled at the same time. I have speakers and bluetooth headset and it shows they are both active in the playback Panel devices and my headset as default device. The equalizing bar which usually goes next to them has disappeared, however. When I try to disable them, nothing happens. When I run a convenience store on one of the devices, it says that the problem is that the device is disabled and says to activate manually. But I can not because it is already activated. Do the side slide to open the control panel displays the volume button dimmed with the text, "disabled" underneath.
My operating system is Windows 8. My bluetooth device is BTH220. My speakers are realtek high definition audio.I updated all my audio drivers and restarted my computer several times. I tried disabling and disconnection of the devices and convenience stores running. Nothing seems to work.Thanks for any help you have!I don't think that problem is related to the audio drivers
Try to update the other drivers starting with bluetooth -
Trying to record demo and training at the same time
Ok... I remember when I got 8 Captivate you can record more than a software simulation both (multimode). I'm doing it, but I can't figure out how. I chose to add a software simulation and selected automatic as registration type. It seems I don't have the possibility to choose a type of simulation in the Mode menu: Demo, training, assessment, and Custom. What do I have to use Custom? When I select this option, I don't always anywhere to select more than one record mode. I want to record a demo and training at the same time. Thank you!
This will not work because you are already in a single file, you can not expect suddenly to be converted into 3 files. It was exactly the same behavior for previous versions.
To be able to capture in addition to a mode, you must start a new project with the file new software Simulation (or the old shortcut CTRL-R).
-
The opening of Flash files are twice at the same time!
When I click on a flash link on my page, two swf files open and play at the same time. I worked on it over and over again. Can anyone help?
Matthew
<! DOCTYPE html >
< html >
< head >
< meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 ">"
< name meta = "generator" content = "Adobe Dreamweaver CS6" >
< title > Mark Van video < /title >
"< link href ="... /... ' / favicon.ico ' rel = "shortcut icon" >
< style type = "text/css" >
an img {}
border: 0;
}
{.tablecells}
do-family: Arial, Helvetica, without serif.
do-size: 12px;
position: absolute;
left: 170px;
top: 95px;
Width: 818px;
height: 628px;
z-index: 5;
}
{Flash
do-family: Arial, Helvetica, without-serif, Verdana;
}
{.disclaimer}
do-family: Arial, Helvetica, without serif.
do-size: 12px;
Color: #000000;
}
. HDR {}
position: absolute;
z-index: 1;
left: 0px;
Top: 0px;
Width: 232px;
}
{.linx}
position: absolute;
z-index: 2;
left: 450px;
top: 33px;
Width: 1px;
color: #FFFFFF;
}
a: hover {}
text-decoration: none;
Color: #FF0000;
}
a: link {}
text-decoration: none;
color: #0033ff;
}
a: visited {}
text-decoration: none;
color: #ff33cc;
}
a: active {}
text-decoration: none;
Color: #0000ff;
}
{.vmlogo}
position: absolute;
left: 5px;
top: 600px;
z index: 6;
}
< / style >
"< link href ="... /... "/ SpryAssets/SpryMenuBarVertical.css" rel = "stylesheet" type = "text/css" >
< style type = "text/css" >
{body
background-color: #FFFFFF;
}
body, td, th {}
do-family: Arial, Helvetica, without-serif, Verdana;
color: #FFFFFF;
}
< / style >
< script type = "text/javascript" >
function MM_preloadImages() {//v3.0
var d = document; If (d.images) {if(!d.MM_p) d.MM_p = new Array();
var i, j is d.MM_p.length, a = MM_preloadImages.arguments; for (i = 0; i <.) Length; i ++)
If (a [i].indexOf("#")! = 0) {d.MM_p [j] = new Image; d.MM_p [j ++] .src = a [i] ;}}
}
function MM_openBrWindow (theURL, winName, features) {//v2.0
Window.Open (Theurl, winName, Features);
}
< /script >
"< script src ="... /... "/ SpryAssets/SpryMenuBar.js" type = "text/javascript" > < / script >
< / head >
< body text = "#FF0000" link = "#0033ff" vlink = alink "#ff33cc" = "#0000ff" >
"< div class ="vmlogo"> < img src ="... /... "/ images/random/Check_Mark.png" alt = "logo of the vm" width = "152" height = "36" > < / div >
< div class = "tablecells" id = "template" >
< table width = "803" height = "572" border = "1" cellpadding = "2" cellspacing = "2" >
< b >
< td colspan = "5" align = "right" valign = "middle" bgcolor = "#FFFFFF" scope = "row" > < font color = "red" > < strong > links of video click below to see feature - click on the icons to visit this page < facilities > < b > < br >
" < a href =" https://www.youtube.com/user/VanMarkProducts/videos?shelf_id=1 & view = 0 & sort = dduser/VanMarkP roducts/featured? view_as = public "title ="Van Mark Online Video Library"target ="_blank"> " https://www.YouTube.com/user/VanMarkProducts/videos ? < br >
shelf_id = 1 & view = 0 & out = dduser/VanMarkProducts/videos? view_as = public < /a > < / b > < / police > < table >
"" < td height = "15" colspan = "2" align = "center" valign = "middle" bgcolor = "#FFFFFF" scope = "row" > < font color = "red" > < b > < img src = "... /... / images/random/youtube.jpg" alt = "YouTube" width = "110" height = "43" onClick = "MM_openBrWindow ('https://www.youtube.com/user/VanMarkProducts/videos?shelf_id=1 & view = 0 & sort = ddplaylist? list = UU-q0BeeUtFV6cBQglQPlM_A ',' YouTube ',' scrollbars = yes, width = 740)" , height = 490")" > < / b > < / font > < table >
< /tr >
< b >
< th width = "117" height = "21" align = "center" valign = "middle" nowrap, bgcolor = "#6699FF" scope = "row" > brakes < /th >
< th width = "106" align = "center" valign = "middle" nowrap, bgcolor = "#6699FF" scope = "row" > Accessories < /th >
< th width = "121" align = "center" valign = "middle" nowrap, bgcolor = "#6699FF" scope = "row" > Tables seen < /th >
< th width = "101" align = "center" valign = "middle" nowrap, bgcolor = "#6699FF" scope = "row" > Machines RIP < /th >
< th width = "100" align = "center" valign = "middle" nowrap, bgcolor = "#6699FF" scope = "row" > Trim-A-gutter < /th >
< th width = "101" align = "center" valign = "middle" nowrap, bgcolor = "#6699FF" scope = "row" > how to the < /th >
< th width = "101" align = "center" valign = "middle" nowrap, bgcolor = "#6699FF" scope = "row" > misc. < /th >
< /tr >
< b >
"< th width = '117' height = '73' align ="center"valign ="top"bgcolor ="#FFFFFF"scope ="row"nowrap > < a href =".. /.. / Brakes/VanMarkBrakes.html "> < img src ="... /... "/ images/Archives/Video/Brakes_Collage.png" width = "100" height = "65" alt = "Brakes icon" border = "1" > < /a > < /th >
"< th width ="106"align ="center"valign ="top"nowrap scope ="row"> < a href ="... /... / accessories/accessories.htm "> < img src ="... /... "/ images/Archives/Video/Acc.png" width = "100" height = "65" alt = "Icon of the CSTA" border = "1" > < /a > < /th >
"< th width ="121"align ="center"valign ="top"bgcolor ="#FFFFFF"scope ="row"nowrap > < a href ="... /... / SawTables/saw_tables.htm "> < img src ="... /... "/ images/Archives/Video/SawTable_icon.png" width = "100" height = "65" alt = "Icon of Table Saw" border = "1" > < /a > < /th >
"< th width ="101"align ="center"valign ="top"nowrap scope ="row"> < a href ="... /... / Slitters/Slitters.htm "> < img src ="... /... "/ images/Archives/Video/Trim-A-Slitter.png" width = "100" height = "65" alt = "tas24" border = "1" > < /a > < /th >
"< th width ="100"align ="center"valign ="middle"bgcolor ="#FFFFFF"scope ="row"nowrap > < a href ="... /... / Roofing/TrimAGutt/tag_1.htm "> < img src ="... /... "/ images/Archives/Video/TAG_Vid_icon.png" width = "100" height = "65" alt = "Icon TAG50" border = "1" > < br >
< /a > < /th >
"< th width ="101"align ="center"valign ="top"nowrap scope ="row"> < a href ="... / Instructional / instruct.htm "> < img src ="... /... "/ images/Archives/Video/How_To.png" width = "100" height = "65" alt = "Howto" border = "1" > < /a > < /th >
"< th width ="101"align ="center"valign ="top"bgcolor ="#FFFFFF"scope ="row"nowrap > < a href ="... /... / index.html "" > < img src = "... /.." "/ images/Archives/Video/Misc-Icon.png" width = "100" height = "65" alt = "Misc Icon" border = "1" > < /a > < /th >
< /tr >
< b >
"< td width ="117"height ="21"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ Music videos/Metal_Master.wmv" title = "Metal Master® 20 Clip" target = "_blank" onClick = "MM_openBrWindow('..)." /.. /Videoclips/Metal_Master.wmv','mm','scrollbars=Yes,width=7 20, height = 480') "> Metal Master® < /a > < table >"
"< td width ="106"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ Music video/TrimCutter.wmv" title = 'help TrimCutter' target = '_blank' class = 'vid' > TrimCutter™ < /a > < table >
"< td width ="121"align ="center"valign ="middle"nowrap > < a href ="... /... / flash_content/TAT60_Video/TAT60. MP4"title ="Trim-A-Table TAT60Clip' target = '_blank' > < NOBR > Trim - A - Table™ TAT60 < / NOBR > < /a > < table >
"< td width ="101"align ="center"valign ="middle"> < a href ="... /... "/ Music videos/TAS.wmv" title = "Trim-A - Slitter™ ' target = '_blank' > S24C cutting machine < /a > < table >
"< td width ="100"align ="center"valign ="middle"> < a href ="... /... "/ Music video/TAGprimer.wmv" title = "Trim-A-gutter Clip" target = "blank" > TAG50 Primer < /a > < table >
"< td width ="101"align ="center"valign ="middle"> < a href ="... /... "/ flash_content/drip_edge.swf" title = "Drip" target = "_blank" onClick = "MM_openBrWindow('..)." /.. /flash_content/drip_edge.swf','DripEdge','width=740,height = 490') "> drip < /a > < table >"
"< td width ="101"align ="center"valign ="middle"> < a href ="... /... "/ flash_content/Main Feature / Main_Feature.swf" title = "Main Feature" target = "_blank" onClick = "MM_openBrWindow('..)." /.. 512, height = 385'/videoclips/MainFeature.wmv','main','scrollbars=Yes,width=) "> main feature < /a > < table >"
< /tr >
< b >
"< td width ="117"align ="center"valign ="middle"nowrap scope ="row"> < a href ="... /... "/ Music video/IM1055.wmv" title = "Industrial Metal Master® EZ 20" target = "_blank" > Ind Metal Master® < /a > < table >
"< td width ="106"align ="center"valign ="middle"nowrap scope ="row"> < a href ="... /... "/ flash_content/Ezgo/ezgo.swf" title = 'UniStand EZ - Go™' target = '_blank' > UniStand EZ - Go™ < /a > < table >
"< td width ="121"align ="center"valign ="middle"nowrap > < a href ="... /... "" / Music videos/TAT50demo.mp4 "title ="Trim-A-Table TAT60Clip' target = '_blank' > Trim-A - Table™ < /a > < a href = "... /... "/ Music videos/TAT50demo.mp4" title = "Trim-A - Table™ Clip TAT50" target = "_blank" > TAT50 < /a > < table >
"< td width ="101"align ="center"valign ="middle"nowrap > < a href ="... /... "/ flash_content/SCIvideo/scisetup.swf" title = "Industrial cutting machine Setup" target = "_blank" onClick = "MM_openBrWindow('..)." /.. /flash_content/SCIvideo/scisetup.swf','scisetup','width=72 0, height = 480') "> Ind cutting machine Setup < /a > < table >"
"< td width ="100"align ="center"valign ="middle"> < a href ="... /... ' / flash_content/Tag.swf "title ="How it works"target ="_blank"> Tag.swf < /a > < table >
"< td width ="101"align ="center"valign ="middle"> < a href ="... /... "/ flash_content/hem.swf" title = "Hemming" target = "_blank" onClick = "MM_openBrWindow('..)." /.. (/ flash_content/hem.swf ', 'Hem',' width = 740, height = 490') "> ic low hem < /a > < table >"
"< td width ="101"align ="center"valign ="middle"> < a href ="... /... ' / flash_content/TALouver/TALouver.swf ' target = '_blank' onClick = 'MM_openBrWindow('..). ' /.. (/ Music videos/louver.wmv ',' tal ',' width = 360, height = 240') "> sorting m - A - Louver™ < /a > < table >"
< /tr >
< b >
"< td width ="117"align ="center"valign ="middle"nowrap scope ="row"> < a href ="... /... "/ Music video/TrimMaster.wmv" title = "Mark II TrimMaster® Clip" target = "_blank" > Mark II TrimMaster® < /a > < table >
"< td width ="106"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ Music video/CoilCradle.wmv" title = "Coil Cradle™" target = "_blank" onClick = "MM_openBrWindow('..)." /.. /Videoclips/CoilCradle.wmv','coil','scrollbars=Yes,width=5 12, height = 385') "> Coil Cradle™ < /a > < table >"
"< td width ="121"align ="center"valign ="middle"> < a href ="... /... "/ flash_content/SureCut90.swf" title = "SureCut™ 90" target = "_blank" > SureCut™ SCT90 < /a > < table > "."
"< td width ="101"align ="center"valign ="middle"nowrap > < a href ="... /... "/ flash_content/TAS24/TASCombo.swf" title = "BUNCH Combo" target = "_blank" onClick = "MM_openBrWindow('..)." /.. (/ flash_content/TAS24/TASCombo.swf','combo','scrollbars=Yes, width = 512, height = 385') "> cutting machine Combo < /a > < table >"
"< td width ="100"align ="center"valign ="middle"nowrap > < a href ="... /... "/ Music videos/AsSeen.wmv" title = "As seen on TV" target = "_blank" onClick = "MM_openBrWindow('..)." /.. /Videoclips/AsSeen.wmv','','scrollbars=Yes,width=320,Heigh t = 240') "> as seen on TV < /a > < table >"
"< td width ="101"align ="center"valign ="middle"> < a href ="... /... "/ flash_content/cornerpost.swf" title = "Corner post" target = "_blank" onClick = "MM_openBrWindow('..)." /.. /flash_content/cornerpost.swf','cornerpost','width=740,Hei ght = 490') "> < /a > corner post < table >"
"< td width ="101"align ="center"valign ="middle"nowrap > < a href ="... /... "/ flash_content/Looper/Looper.swf" title = "Video loop" target = "_blank" > < /a > < table > video streaming
< /tr >
< b >
"< td width ="117"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ Music video/TrimAbrakeII.wmv" title = "Trim-A-brake II Demo' target = '_blank' > Trim-A-Brake II™ < /a > < table >
"< td width ="106"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ flash_content/TF_Demo/TF_Demo.swf" title = "TrimFormer™" target = "_blank" > TrimFormer™ < /a > < table >
< td width = "121" align = "center" valign = "middle" scope = "row" nowrap > < table >
"< td width ="101"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ Music videos/SCI48.wmv" title = "Action of cutting machine SCI48" target = "_blank" onClick = "MM_openBrWindow('..)." /.. /Videoclips/SCI48.wmv','sciaction','scrollbars=Yes,width=5 12, height = 385') "> SCI48 Action < /a > < table >"
"< td width ="100"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ flash_content/RainTest/Rain_Test.swf" title = "Rain Test" target = "_blank" onClick = "MM_openBrWindow('..)." /.. /flash_content/RainTest/Rain_Test.swf','rain','scrollbars= Yes, width = 640, height = 480') "> rain Test < /a > < table >"
"< td width ="101"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ flash_content/WindowCasing.swf" title = "Window envelope" target = "_blank" onClick = "MM_openBrWindow('..)." /.. /flash_content/WindowCasing.swf','casing','width=740,Heigh t = 490') "> envelope window < /a > < table >"
"< td width ="101"align ="center"valign ="middle"scope ="row"> < a href ="... /... ' / flash_content/Adjustments.swf "title = 'Setting brakes' target = '_blank' > adjust the brake < /a > < table >
< /tr >
< b >
"< td width ="117"align ="center"valign ="middle"scope ="row"> < a href ="... /... "" / Music videos/TrimMaster.wmv "title ="Cam-Lock Demo"target ="_blank"> < /a > < Cam - Loc has href ="... /... / Videos/TrimMaster.wmv "> system < /a > < table >"
< td align = "center" valign = "middle" scope = "row" onfocus = MM_openBrWindow('..) « /.. (/flash_content/Multi_Gauge/MultiGauge.swf','MG','scrollbar s = yes, largeur = 720, hauteur = 480')"> < span id ="multigauge"> < a href ="... /... "" / flash_content/Multi_Gauge/MultiGauge.swf "title ="Multi Gauge™"target ="_blank"> Multi Gau < /a > < / span > < a href ="... /... / flash_content/Multi_Gauge/MultiGauge.swf ">™ < /a > < table > ge"
< td width = "121" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "101" align = "center" valign = "middle" scope = "row" nowrap > < table >
"< td width ="100"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ flash_content/scuffy/Scuff_Test.swf" title = "Scratch Tip" target = "_blank" onClick = "MM_openBrWindow('..)." /.. /flash_content/scuffy/Scuff_Test.swf','scuffy','scrollbars = yes, width = 640, height = 480') "> scraping Tip < /a > < table >"
"< td width ="101"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ flash_content/Gravel_Stop.swf" title = "Gravel Stop" target = "_blank" onClick = "MM_openBrWindow('..)." /.. /flash_content/Gravel_Stop.swf','gravel','width=740,height = 490') "> gravel Stop < /a > < table >"
"< td width ="101"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ flash_content/VMSlideshow.swf" title = "Timeline" target = "_blank" onClick = "MM_openBrWindow('..)." /.. sizable /flash_content/VMSlideshow.swf','slider','menubar=Yes,Resi = yes, width = 740, height = 510') "> timeline MPCV < /a > < table >"
< /tr >
< b >
"< td width ="117"align ="center"valign ="middle"scope ="row"> < a href ="... /... ' / flash_content/Adjustments.swf "title ="Setting Van Mark Brakes"target ="_blank"> setting brake < /a > < table >
"< td width ="106"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ Music video/NailHawg_02.avi" title = "NailHawg™" target = "_blank" > NailHawg™ < /a > < table >
< td width = "121" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "101" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "100" align = "center" valign = "middle" scope = "row" nowrap > < table >
"< td width ="101"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ flash_content/J_Channel.swf" title = "Channel J" target = "_blank" onClick = "MM_openBrWindow('..)." /.. /flash_content/J_Channel.swf','jchannel','scrollbars=Yes,w width = 720, height = 510') "> channel J < /a > < table >"
"< td width ="101"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ flash_content/Brakes/Brakes.swf" onClick = "MM_openBrWindow('..)." /.. (/ flash_content/Brakes/Brakes.swf','flash','scrollbars=yes, width = 720, height = 510') "> Van Mark brakes < /a > < table >"
< /tr >
< b >
"< td width ="117"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ Music video/POWERslot.wmv" title = "POWERslot™ hinge" target = "_blank" > POWERslot™ < /a > < table >
"< td width ="106"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ Music video/QuickScore.wmv" title = "QuickScore™" target = "_blank" > QuickScore™ < /a > < table >
< td width = "121" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "101" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "100" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "101" align = "center" valign = "middle" scope = "row" onfocus = "MM_openBrWindow (", 'adaptation ',' scrollbars = yes, width = 720, height = 480') "" > < a href = ".." /.. ' / flash_content/CopingCover.swf "title ="Coping Cover' target = '_blank' onClick = 'MM_openBrWindow('..). ' /.. /flash_content/CopingCover.swf','coping','width=740,height = 490') "> adaptation coverage < /a > < table >"
< td width = "101" align = "center" valign = "middle" scope = "row" nowrap > < table >
< /tr >
< b >
"< td width ="117"height ="19"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ Music videos/ReplaceVinyl.wmv" title = 'Replacement of the vinyl strip' target = '_blank' > < table > < /a > vinyl Strip
"< td width ="106"align ="center"valign ="middle"scope ="row"> < a href ="... /... ' / flash_content/UniLeg.swf "title ="UniLeg™"target ="_blank"> UniLeg™ < /a > < table >
< td width = "121" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "101" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "100" align = "center" valign = "middle" scope = "row" nowrap > < table >
"< td width ="101"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ flash_content/brick_mold.swf" title = "Façade moulding" target = "_blank" onClick = "MM_openBrWindow('..)." /.. /flash_content/brick_mold.swf','brickmold','width=740,HEIG ht = 490') "> brick mould < /a > < table >"
< td width = "101" align = "center" valign = "middle" scope = "row" nowrap > < table >
< /tr >
< b >
< td width = "117" height = "19" align = "center" valign = "middle" scope = "row" nowrap > < table >
"< td width ="106"align ="center"valign ="middle"scope ="row"> < a href ="... /... ' / flash_content/UniStand.swf "title ="UniStand™ USA1"target ="_blank"> UniStand™ USA1 < /a > < table >
< td width = "121" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "101" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "100" align = "center" valign = "middle" scope = "row" nowrap > < table >
"< td width ="101"align ="center"valign ="middle"scope ="row"> < a href ="... /... ' / flash_content/Z_Bend.swf "title ="& quot; Z & quot; Bend' target = '_blank' onClick = 'MM_openBrWindow('..). ' /.. (/ flash_content/Z_Bend.swf ',' zbend ',' width = 740, height = 490') "> Basic & quot; Z & quot; Bend < /a > < table >
< td width = "101" align = "center" valign = "middle" scope = "row" nowrap > < table >
< /tr >
< b >
< td width = "117" height = "19" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "106" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "121" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "101" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "100" align = "center" valign = "middle" scope = "row" nowrap > < table >
"< td width ="101"align ="center"valign ="middle"scope ="row"> < a href ="... /... "/ flash_content/ValleyPan.swf" title = "Valley Pan" target = "_blank" onClick = "MM_openBrWindow('..)." /.. /flash_content/ValleyPan.swf','valleypan','width=740,Heigh t = 490') "> Valley Pan < /a > < table >"
< td width = "101" align = "center" valign = "middle" scope = "row" nowrap > < table >
< /tr >
< b >
< td width = "117" height = "19" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "106" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "121" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "101" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "100" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "101" align = "center" valign = "middle" scope = "row" onfocus = MM_openBrWindow('..) « /.. (/flash_content/Adjustments.swf','adjustments','width=740,h huit = 490')"> < a href ="... /... / flash_content/Shed_Flash.swf "> hangar flashing < /a > < table >"
< td width = "101" align = "center" valign = "middle" scope = "row" nowrap > < table >
< /tr >
< b >
< td height = "19" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td align = "center" valign = "middle" scope = "row" nowrap > < table >
< td align = "center" valign = "middle" scope = "row" nowrap > < table >
< td align = "center" valign = "middle" scope = "row" nowrap > < table >
< td align = "center" valign = "middle" scope = "row" nowrap > < table >
< td align = "center" valign = "middle" scope = "row" onfocus = MM_openBrWindow('..) « /.. (/flash_content/Adjustments.swf','adjustments','width=740,h huit = 490')"> < a href ="... /... ' / flash_content/Ridge_Cap.swf "title ="Ridge"target ="_blank"> Ridge < /a > < table >
< td align = "center" valign = "middle" scope = "row" nowrap > < table >
< /tr >
< b >
< td width = "117" height = "19" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "106" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "121" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "101" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "100" align = "center" valign = "middle" scope = "row" nowrap > < table >
< td width = "101" align = "center" valign = "middle" scope = "row" nowrap > < table >
< /tr >
< b >
< td height = "55" colspan = "7" align = "left" valign = "top" bgcolor = "#0099FF" scope = "row" > these videos, animations and slideshows are for purposes of template only and provided as a service to our customers and suppliers. Van mark Products Corp. cannot be held responsible for the correctness of installation of videos, animations and slideshows, or other components realized with the use of any Mark Van tool and product. < table >
< /tr >
< b >
"< td height ="82"colspan ="7"align ="center"valign ="bottom"bgcolor ="#FFFFFF"scope ="row"> < h3 > < img src ="... /... "/ images/random/newfooter.png" alt = "Footer" width = "538" height = '73' well = "#Map" border = "0" >
< name of the map 'Map' = >
" < area shape ="rect"coords ="100,50,160,72"href =" https://www.Facebook.com "target ="_blank"alt ="Facebook"> "
" < area shape ="rect"coords ="191,47,249,71"href =" https://Twitter.com/# "target ="_blank"alt ="Twitter"> "
" < area shape ="rect"coords ="277,49,348,73"href =" https://www.YouTube.com/user/VanMarkProducts/videos?shelf_id=1 & View = 0 & out = DD "target ="_blank"alt ="YouTube"> "
" < area shape ="rect"coords ="359,48,423,72"href =" https://www.LinkedIn.com "target ="_blank"alt ="LinkedIn"> "
< / map >
< / h3 > < table >
< /tr >
< /table >
< / div >
< div >
< ul id = "MenuBar1" class = "MenuBarVertical" >
"< li > < a href ="... /... "/ index.html" title = "Home Page" > homepage < /a > < /li >
"< li > < a href ="... /... "/ About_Us/about_us.htm" title = "About Us" > about us < /a > < /li >
"< li > < a href ="... /... "/ Brakes/VanMarkBrakes.html" title = 'Van Mark Brakes' > brakes < /a > < /li >
"< li > < a href ="... /... "/ accessories/accessories.htm" title = 'Brake accessories' > Accessories brake < /a > < /li >
"< li > < a href ="... /... ' / SawTables/saw_tables.htm "title ="Tables"saw > table saw < /a > < /li >
"< li > < a href ="... /... "/ Slitters/Slitters.htm" title = "Machines RIP" > Machines RIP < /a > < /li >
"< li > < a href ="... /... "/ Roofing/TrimAGutt/tag_1.htm" title = "Trim-A-gutter" > Trim-A-gutter < /a > < /li >
"< li > < a href ="... /... "/ Roofing/Roofing_Products.htm" title = 'Roofing products' > Products of roof < /a > < /li >
"< li > < a href ="... /... "/ Tools/tools.htm" title = ' Misc/parts/buy' > Misc/parts/buy < /a > < /li >
"< li > < a href ="... /... ' / Archives/Archives.htm "title ="Archives"> bed/video/pictures < /a > < /li >
< li > < a style = "background: yellow;" color: #666; "" href = "... /... "/ Offers/promos.htm" title = "Promotions" > Promotions < /a > < /li >
"< li > < a href ="... /... "/ PartsList/parts_page.htm" title = "Parts list" > list < /a > < /li >
"< li > < a href ="... /... "/ ssl/cusserv.html" title = "Sales/Customer Service" target = "_blank" > Service Sales/UC < /a > < /li >
"< li > < a href ="... /... "/ ssl/ideas.html" title = "Submit ideas" target = "_blank" > submit ideas < /a > < /li >
"< li > < a href ="... /... "/ ssl/vanmarkjobs.html" title = "Careers/jobs" target = "_blank" > careers/jobs < /a > < /li >
< li > < a href = "mailto: " [email protected] "title 'contact us' = > contact us < /a > < /li > "
< /ul >
< / div >
"< div class ="hdr"> < img src ="... /... "/ background/blankhdr.png" alt = "hdr" width = "1600" height = "94" > < / div >
< div class = "picker1" > < / div >
< div class = "linx" >
< table width = "250" border = "0" align = "center" cellpadding = "4" cellspacing = "4" >
< b >
"< td align ="center"valign ="middle"bgcolor ="#FFFFFF"> < a href ="... / ImageArchive/imagearchive.htm "> < strong > < Images / strong > < /a > < table >"
< td align = "center" valign = "middle" bgcolor = "yellow" > < a href = "vm_video.htm" > video < /a > < table > "
"< td align ="center"valign ="middle"bgcolor ="#FFFFFF"> < a href ="... / Literature/literature.htm "> lit/manuals < /a > < table >"
"< td align ="center"valign ="middle"bgcolor ="#FFFFFF"> < a href ="... / Instructional / instruct.htm "> didactics < /a > < table >"
< /tr >
< /table >
< / div >
< / body >
< / html >
-
To scale an imported graphic (framework and content at the same time)
I read the help files, the knowledge base, even watched instructional videos but can ' t find a way to scale a placed graphic. I understand the difference between a frame and the content. I can put the scale either by using the mouse or digital controls. But to measure these things, what I owe to scale each seseparately?
For example, I want the picture size to 2.0 inches wide. I don't see a way to do this in a single operation.
I see that you CAN do in %. Select the image of the object and if you the size to 50%, it works - framework and content go to half size. But if I size dimension (width = 1.5 "), I have the frame, then the content.
Is there a way to act on the structure and content at the same time?
It is InDesign CS3 on Mac.
It is not really intuitive. Select the image, and then look in the control panel for the horizontal and vertical scale fields, which should all two say 100% when you first select an object. The unit of measure in these areas by default is %, but as any of the numeric fields of ID, you can use any unit you want, as long as tell InDesign what units you are using. If you want to 2.0 ", enter 2.0i (you need not nitrogen) in the width field and press ENTER. Your frame and content will scale to 2 ".
-
on the Iphone 7. How to listen to music, if we have a normal headset and charge at the same time?
How to listen to music, if we have a normal headset and charge at the same time?
< re-titled by host >
It sopposed must be a wireless charging dock to be launched shortly if the dock does not so it is a disappointment
-
Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!
Marley6921 wrote:
Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!
Put it on wait ten minutes if the phone did not come one, then hold down the sleep/Home button until you see the apple logo and then release, make sure that the phone is still connected to the charger.
-
USBOTG and Charge at the same time on Stream 8
To keep this thread as productive as possible and efficient for those who find it useful to:
Unless you have under your eyes
1. a schematic representation of the 8 Stream USB port (USB port and battery electric circuit etc.)
2 source code for the firmware BIOS and kernel that controls the material
Please DO NOT respond or say "is not possible". In view of the above is true, you do not have enough information to say '' not possible. ''
If no one replys with a solution, what he calls not possible by default.
Also please do not answer to say ' I don't know how "or" but I know how to do anything else that ' is also not that useful.
An update of the BIOS or other software update may be required by HP, Microsoft or both to offer this feature really intuitive and quite possible.
And I hope that this thread can be an effort consolidated by all who have the 8 flow to make the necessary changes. The majority of the other tablet PCs are capable of it. It seems that only the 8 Stream and a few others have trouble with her.
~~~~
I want the ability to use a simple, inexpensive cable and perhaps standard (with electronic active minimum inside) which allows me to host and to use one or more USB devices on the Stream via its USB port B microphone 8 while this cable can also be connected to a charger standard and charge 8 flow simultaneously. This means that the cable has a minimum of three connectors. One of the possible configurations are as follows (apart from the normal charging cable):
1 cable Micro USB B Male - connect to the stream 8
2 USB male A - connect to the AC charger (IE one that came with the 8 Stream)
3. USB A female - one or several connectors to plug into the key of USB data, keyboard, mouse or even a hub.
Connector # 2. above shall provide a power supply to recharge the 8 Stream via conn. #1 and the power supply for external USB devices via conn. #3 so that they are in use - all at the same time.
A and if the same cable can act as a normal OTG no charger for when no external power supply is available. This may necessitate a switch or an electrontics active inside.
The last part of this goal is unimportant for various reasons. I wish that HP, the manufacturer of 8 flow, to State in writing good mode necessary to do this, so that other manufacturers or even-it yourself can make maximum use of their tablet HP equipment.
~~~~
The neat thing it will alow a person to do with their tablet, it is to work at home using the Tablet as a desktop PC by connecting a keyboard, mouse, perhaps external screen (with USB to the display adapter) and knit for a long time without time limit prescribed by the battery life because the charger provides energy to all involved.
If there is only a single connector on the cable #3, then an additional node of coarse had to provide support for these multiple USB devices at the same time. However, it would be better if there were several #3 connectors integrated in the cable itself. This would be better as a suitable USB hub also requires its own power. That an adapter is necessary if the whole thing were integrated into one.
~~~~
I really want answers from anyone who has already accomplished USB OTG delivered with simultaneous load with flow 8. (independent of any published 'proper' way is also welcome)
Today's date is 2015-01-16. If in 2015-02-16 (one month), nobody has posted a solution and then starts to bug HP and Microsoft on it's us?
~~~~
Technical training:
I understand the possibility the tablet software and firmware must take a decision on the manner in which power flows on the power port USB microphone B pins.
I know that with a proper design of the electronic circuit carring these signals of power inside the Tablet could be sensitive to what is connected and without risk to decide for himself what to do without needing to control software. For example by testing/detecting periodically differential voltage or current management to see what sides of the connector can supply.
But this is only one of the many "could bes".
In addition, this can be no standard regarding the standard USB. What seems to be actually the case with a lot of cables OTG + fresh, is that physical clues embedded in the cable or charger are used to signal to the Tablet what the situation is. Then the signal of software/firmware of the Tablet, interprets what the situation is intelligently and responds by flipping the bits of correct hardware control to activate, or deactivate the power flow in the port and also control its direction in or out.
I'm not familiar with the standard USB. Maybe I could do more research, if I believed that HP followed with 8 Stream or even the standard covered this situation explicitly.
But to a certain extent, it seems I'll have to invent something that should be intuitively just like it does with other tablets. Isn't it? Maybe I'm overthinking, but I can't find any USB OTG + cables load that specify compatibility with 8 HP flow.
In any case, I was familiar with both methods other use of tablets to send the highest mentioned signal to the hardware/firmware/software of the tablet to the idea that it's time to load / time of OTG or both.
The first method is a 0 Ohm to 200 ohms short between pin USB A 2 and 3. This is the bidirectional data differential lines D - and D + respectively. In data mode, all the data passes back and forth on those lines. When you load with a cable, it's the charger module that puts this short, not on the cable. I measured the short on three different Chargers. It is 0 Ohms on two of them, one of those who are the charger that came with the 8 HP flow. The others 0 ohms was generic. The third was for an apple iPad and it measured on 53KOhms. It's probably not the resistance ohms 0-200, but probably it is impedance termination indicating that there is some intelligent serial port communication in the charger itself. Leave it to Apple to be different.
This method is somewhat questionable, as this signaling mode would prevent OTG + fee because it seems unlikely that you will be able to OTG when the data lines are shorted each and overloaded with such low impedance. I could be wrong on this subject...
The other method I have seen suggested to work with some tablets and phones other than the 8 stream is too short the USB microphone B pin 5 to Terminal 4 with 0 Ohms to 100 000 Ohms.
USB B has 5 pins. USB has only 4. The extra pin on B moves the GND pin 4 pin 5 pin to and makes pin 4 PIN ID.
If this signal applies to a drop in the ID pin (4) or in some cases, I saw that she proposed, he runs down with 0 Ohms.
Dead shorting things always makes me nervous. If ID is a simple normally high impedance high input, resistance could be used to make voltage well below the low or zero threshold while also preventing the risk of damage when cheat on him with a device that you do not have the diagram for.
Yet, 100K is a bit high for a 'pull down' in most of the situations that I'm used to. Even a 10K would be uncertain. A 1 K or 2 K seems reliable enough, but then things are weaker and in know more nowadays low... All but a dead short but if possible.
So, it seems possible that the device might be able to "indicate" by the specific value of the resistance, which can be found here. In other words the resistance is not a pull down but in fact a signature analog ID, in which case the exact value will be crucial. So if this is the case, a guess is not going to work.
Obviously in such a system as described above, a chip inside the Stream 8 should be responsible to support this information. I hope the 8 Stream has such a chip.
Probably a register inside this chip would be at all times what the State of the pin ID is a binary number. All that is needed is for the BIOS to the chip and the registry in it and read this number via the bus to determine what happens to the port. Finally, he would use that signals of info to send the order of material to the electrontics of power set the appropriate direction to take etc. (and change the State of the icon on the screen of the rude)
I don't know if the PIN ID method described is a standard USB or not either.
Eventually, there may be a third way. But I do not suspect that it would be possible with a non-active external device. In any case too complicated for the novice DIY for sure.
The device would need to act is a kind of extension of bus. As an active hub. But she would use the negotiation of data USB serial lines and in addition to reproduce one or more additional USB ports, intelligently inform the tablet to get with the program which is "now we're going to otg and recharge at the same time."
This requires a smart external device with a processor Inside, no doubt.
It seems to me that many other tablets have been able achieve avecjoint here the need for a smart external device and thus the flow must also be able to do.
There is a device that claims to be able to work with the HP Jet 7 and 8 and provides same ethernet and USB and big DVI ports so loads the data stream. But its expensive because it is active. Se here:
It's called a "Docking Station".
A reference to a product that does exactly what I want (possibly without active electronic components) is here:
It's by Kirin and it is a device of type squid with four USB ports. Precisely, which is my goal. But read in the comments stream 7 user indicated that he would not be OTG and load, not really clear if it worked as a hub USB OTG or not. Another evaluator stated that she would not support even a single USB device much less fees of 8 Stream. This device has a switch.
I forgot to mention that some 'hackers' have claimed success with other tablets to deceive their devices by using a multi-step process to plug things in. Usually in general they would get connected Tablet and load first, then they would return a switch or something remove some resistance or the signal was introduced by the first position of the switch. For some reason any Tablet would continue to require. Then the data lines would be free and they would plug in a usb key and it mounts correctly even if the tablet was always in charge.
It's like the power circuit has a lock which does not allow it to return to the mode "power flow" as long as he still feels the power flows inward regardless of what software it is telling. Full proposal here.
These tips seem dubious to me. Changes in the BIOS could change the way it works. Also you can not be sure what actually happens if you do not have a schematic representation. You could damage your tablet. Many people will support icon in the operating system whether the Tablet is in charge. But I'm sort of a low-risk guy and my policy is generally indicators of intereperet not to have meaning at all once a device is functioning in a non-standard setting. Especially when it's something that I did not built and could not fix if I FRY.
Hypothetical reasoning: tell me what data sensory discs really the State of the charging light screen? This reflect the bit of hardware control programs actually feeding management and status on the port? Or does it measure the direction of the flow of power, said in the section of the circuit battery monitoring? Point - none of us have a schema because it's owner. To really be sure according to the smart electronic hardware, the port must be mode flow under advisement "of power. If it's in a "power flow out" mode and power will be delivered externally as well you wind upward with both power supplies the same power at the wheel nets. In this case, the two opposing regulators attempting both to drive 5 V can have slightly different voltage calibrations. That could lead to fighting between them, with more than 100% of their capacity. For example if you try to regulate 4.95 real V and the other and other attempts to regulate 5.05 V. Current then flows to the tune of 100 mV / a few milliohms in the cables linking the two. This may be several amperes. (many) In other words, like I said: you want the tablet to know that power is coming in don't go out and automatically hitting the internal switches needed for that to happen. Probably the icon should indicate this with precision, but in some wacky situation, he could not. There may be a chance that the icon could indicate the load and still be burning or focusing on some circuits of the tablet or the charger.
Another thing, I could see that happening is if you play with these reported resistance types enough you might find a resistance value that winds up place the device in an intermittent condition. In other words it keeps flipping back and forth quickly between OTG and fresh. It can give the illusion that it works. You can have marginal communication with your USB devices and battery could even load. But will still be a lot of stress on the power circuit.
It is difficult for me to risk a Tablet perfectly well if I don't know exactly what I'm doing.
If a brave individual makes their own experimentation and verifies that it charges and OTGs and you tell the rest of us, you're a hero.
Maybe one of you has a good knowledge on the USB standard to have more confidence in such an experience... like what the ID pin 4 REALLY supposed to work for example?
That's what I know so far. If you think you can help, thanks in advance, or if this helped you, then your quite welcome.
It works
Evidence
http://targusblog.com/2014/11/25/how-to-turn-a-99-Tablet-into-a-workstation/
But it's 4 x the price in Europe
Have fun
-
Satellite M30X-122: how to use the headphones and speaker at the same time?
Hello
y at - it a possiblity to use headphones and speaker at the same time?
When I plug the headphones into the Jack, the speaker is created off the coast of the moment.Thank you
PeterHi Peter,.
There is unfortunately no way to use both headphones and speakers at the same time. This is because tghere's a disconnection physical power for the internal speakers when you plug in the headphones. It is not by software. The only way around this would be to dismantle the headphones Jack and solder connections that are broken when you insert the headphone permanently.
Kind regards
-
Satellite Pro L770 - 14 H - the use of WLan and Bluetooth at the same time
I have a Satellite Pro L770 - 14H and you want to use a Bluetooth mouse.
With the 'FN' and F8 key I am capable of coding between WLAN and Bluetooth, but it is not possibel to have both at the same time.My question is: How can I have WLAN and Bluetooth at the same time?
To use a Bluetooth mouse with WLAN connection.Thank you very much
HelmutHello
Using Win 8.1?
Usually you could turn on and off Bluetooth in Win 8.1
Settings PC-> PC &-> of Bluetooth devicesThere, you can move the cursor to BT for THE position.
-
Is it possible to use iCloud shares photos with the two opening and Photos at the same time?
Is it possible to use iCloud shares photos with the two opening and Photos at the same time?
Non - PEAK is not a feature of iPhoto or Aperture - this is new with Photos
LN
-
I want to delete email messages on iphone and mac at the same time
How can I delete email messages on iphone and mac at the same time?
Use an e-mail provider that uses the IMAP protocol.
-
Unable to connect WiFi and Bluetooth at the same time
: After that I updated to KitKat 4.4.2 cannot use WiFi and Bluetooth at the same time. Must turn off Bluetooth to use WiFi.can you help with this problem. I have the Motorola droid RAZR maxx hd
-
Lenovo L450 Dock Pro video output DVI and DP at the same time
Hello
I have L450 NB and Pro Dock station.
I have question. Can I connect and use two monitors (1 - DVI, 2 - displayport)?
In this link (https://support.lenovo.com/cz/cs/documents/pd029622) is writable:
3 - any combination
What it means?
If I connect DP and DVI at the same time came out video only on DP.
Is possible to use two screens on the digital output?
Tomas
maniakum wrote:
Is possible to use two screens on the digital output?No, the DisplayPort and DVI Pro docking station port can be used at the same time. So, you need the Dock Ultra.
Maybe you are looking for
-
I deleted the old iPhone content to give to a friend. It was set up this evening and said in the section account she has need of MY Apple ID and password. I have to call Apple because it is registered to my account?
-
Satellite 5200 - powers automatically (sensor/hall-magnet)
I have an automatic feeding weird issue with my laptop Satellite 5200. * Situation. *1 laptop is turned off and the cover is open2. I close the lid while the laptop is always off (just battery is connected)3 result: the laptop automatically and boots
-
Keyboard presses records does not correctly - NB100
I was in possession of my NB100 since the new topic about a month ago. This afternoon, I discovered that when you press the keys as the i, the number 5 is given on the screen instead of waiting for him I. Other keys affected are the letter u, o, p, j
-
Update on apple store of El Capitan 10.11.1 in 10.11.2 on 2015 iMac, OS installed on the SSD external, any night left me with a black screen and mouse arrow top left. Shut down and restart left me with SBOD on the user login. Reinstalling internet CM
-
LaserJet 500 color M551: Firmware upgrade - go directly or perform step-upgrade?
I need to update the firmware on my printer (LaserJet 500 color M551). I'm new to support printers and it's the first printer, I need to update firmware on a client. The firmware is version 2302908_435020. I need to upgrade to 2307851_000057. There