STR-DH520 - pass through

Similar Questions

• STR-DH520 margin adding video HDMI

  My HTPC sends 1920 x 1080 video via HDMI to the Sony APR: STR-DH520.

  Who then sends video to my Samsung Smart TV also capable of 1920 x 1080 via HDMI.

  However, the AVR adds a margin to the image such that there is one inch

  unused screen on the left and right and one half inch of unused screen up and down.

  When I connect the HDMI directly to the HTPC video card TV, there is no margin.

  The Windows 7 video driver knows he's talking to the Sony APR.

  I checked the resolution presented by the HTPC and the settings of the TV screen.

  How can I get the Sony APR to fill the screen?

  Hi Codetonic,

  What you are experiencing is called scanning. The only adjustment to change will turn the PASS THRU feature it so the TV does not see additional CEC via the HDMI connection protocols.

  If this not reslove the issue, are there any changes of the Samsung Smart TV to the mapping of pixels? These settings are usually in the settings screen called display area. If it's characteristic is present in the TV menu mark an attempt to reduce it by-1 or - 2 or increases by + 1 or + 2.

  If my post answered your question, please mark it as an "acceptable Solution".

• STR-DH520 no sound HDMI

  Hello

  I recently bought a STR-DH520 and I'm trying to get audio through HDMI to my P8H77 - I motherboard on my computer, but so far without success.

  If I connect the computer directly to my TV or the sound projector is read from this device. If I connect it to the amp I get no sound from the speakers any audio playback device I select on the computer. However, if I select the projector as a device for reading on the computer I hear the projector (for HDMI passthrough works)

  I have selected the right speaker configuration and have performed a calibration, so I can check that the speakers are working.

  An update, I tried with another computer, still no luck.

• Apple TV 4 Audio pass through

  Hi-

  My current setup is: 4 AppleTV via HDMI-> Onkyo HT-R990 7.1THX via HDMI-> Samsung Smart TV 60 inch LED. The TV speakers are turned off and that all the sound elements through my 7.1 System.

  My question is about how to disable the audio decoding on the Apple TV. Can the Apple TV 4 simply intercommunication audio without decoding? That's why my receiver will decode and choose the best audio configuration for content.

  Having a transmission option is fairly common on most devices such as Blu - Ray players. What's not an option on the Apple TV? I know by selecting "Auto" on the Apple TV, it will send the PCM signal. Why would I have DD or PCM if the content is DTS Master for example? It makes no sense to me.

  I think I have a 'Pass-through' option would satisfy loyal people optical cable and move is a real audio visual component of the Apple TV.

  Does anyone know how this can be done? Your help is greatly appreciated. See you soon!

  It can normally send PCM for music/video stereo and support the bitstream DD for 5.1, ATV 4 7.1 - I assumed AppleTV 4 this but have moved for a few months and don't have not connected my AV Pioneer amp just for the Samsung TV.

  AppleTV does not support DTS officially, certainly not for the content of the iTunes store is not an option, but I don't know about 3rd party applications that could broadcast "other videos" of local shares.

• using PostDelayedCall how to get the value passed through void * callbackData?

  Can someone tell me how to get the data passed through void * callbackData?

  The following code, panel_ptr has the right address but still contains zero.

  void CVICALLBACK value_changed (void * callbackData)
  {
  int * panel_ptr;
   
  panel_ptr = callbackData;
  calculate_new_value (* panel_ptr);
  }

  int sign;

  Panel = 2;

  PostDelayedCall (value_changed & Panel, 0.2);

  The problem is using the callbackData parameter if it is a pointer, it must be a pointer to something which is still topical at the moment that the callback executes. That is to say, you cannot pass the pointer to a local variable in callbackData as when the callback executes the pointer is no longer valid. You can switch from its value, instead, in this way:

  ... SomeFunction)

  {

  int sign;

  ...

  Panel = 2;

  PostDelayedCall (value_changed, (void *) Panel, 0.2);

  ...

  }

  void CVICALLBACK value_changed (void * callbackData)
  {
  int panel_ptr;
   
  panel_ptr = (int) callbackData;

  calculate_new_value (panel_ptr);

  return;
  }

  There are many discussions on the forums on callbackData parameter that you might want to read.

• Configuration of VMware ESX 5.1/5.5 pass through for PowerEdge 2970

  Hello

  I tried to configure VMware ESX 5.1/5.5 pass through for a 8 GB Qlogic FC HBA on PowerEdge 2970 server.

  Even after activation of the virtual technology in the BIOS, the PCI device is not listed in "Advanced settings" to configure pass-through. Attached screenshot shows the current setting of the processor.

  Y at - it all the additional steps required to configure it.

  Concerning

  E.

  Hello Sara

  You're talking Direct path IO or single root i/o virtualization? If so, none of these features are supported on the 2970 system.

  http://www.VMware.com/resources/compatibility/search.php

  I don't think that or the other of these characteristics were available until our 11 generation systems.

  Thank you

• Pass through IPSEC on Cisco 857

  Hello people!

  I have gained reciently a Cisco 857 router. I want to do a site-to-site VPN.

  I set up the ATM0.1 with "ip unnumbered" VLAN 1 interface. I have not configured the router to enable NAT or PAT. VLAN 1 is configured with a public Ip of my ISP address. Behind the cisco router, I have a Zywall 5, this device is my VPN gateway. Initially, it works very well with the other soho router but it blocks often, for this reason, I decided to change it for a cisco router.

  My problem now is that the cisco router does not allow the implementation of VPN.

  Need to activate the IPSEC pass-through?, how can I do this?

  Thanks in advance!

  If you connect through the console:

  recording console 7

  If you connect via telnet:

  farm forestry monitor 7

  monitor terminal

  Concerning

  Farrukh

• WRV200 VPN pass through limits

  We use a Cisco Small Business WRV200 to allow guests to our office to access the public internet, regardless of our corporate network environment. We regularly invited several visit of a company and generally these users connect to their company via a local VPN client. I noticed that after about 5 users activate successfully their VPN clients that no one else can connect to any other VPN tunnels. Internet connectivity still works when these 5 tunnels are active, but no other users can create a VPN tunnel after this point. Again, these are all movers or Pass through tunnels behind the WRV200 in one single environment NAT. is there a limit on vpn pass through or leaving behind this device connections and if so can it be changed? I expect a resolution of firmware to this problem, but it seems that it is only a single firmware version for this device. If this unit has an immutable limit, can then someone propose another product, Cisco Small Business wireless which has no limit of transmission?

  Thank you...

  If the NAT - T is enabled on clients and VPN gateways, there should be no problem. Otherwise, if two IPsec clients behind WRV200 are trying to connect to the same remote gateway without NAT - T active, 2 IPsec sessions could clash between them.

• Launch the Application IT Assistant with pass through authentication

  We have started to purchase DELL servers after many years using HP.  As such, we now need ot use DELL IT Assistant for our hardware monitoring.

  I am use IT assistant to go to the tool Server to my windows but server during the launch of the Web page I have to re-enter my credentials.

  Is it possible to have pass through authentication, whereas when I leave IT Assistant application launch so I don't have to enter a user name and password for the server administrator?

  Thank you

  Otte

  
  

• Golden Gate 12 c 1z1-447 will become available on view of scheduling? or is it passed through the beta process

  Hello

  Golden Gate 12 c 1z1-447 will become available on view of scheduling? or is it passed through the beta process.

  I remember never 1z0 - 447 Oracle 12 c Golden Gate Essentials review be a review.

  He has demonstrated lately on the oracle website.

  but I don't see it on the site of the view.

  I thought it was supposed to become available to plan August 8.

  Roger

  Looks like someone screwed up PV.  When you click on the "View reviews" link on the main page of Oracle to PearsonVue 1Z1-447 appears under «Other reviews"rather than «beta reviews»

  

• I have Acrobat Pro 8 and 9 for Mac. Can't install (CD media). Has already been installed on an old 17 '' Mac; failed hard drive. Everything seems fine, activation passes through, but when I go to start the program, nothing. Nada. No respo

  I have Acrobat Pro 8 and 9 for Mac. Can't install (CD media). Has already been installed on an old 17 '' MacBook Pro; failed hard drive. Then, new facility, MBP 13 "most recent. Everything seems fine, activation ADOBE passes through, but when I go to launch the APPLICATION, nothing. Nada. No response from the application. Suggestions?

  Acrobat 9 (and 8, of course) is not compatible with your operating system.

• Card reader chip as a pass through for VMware View 5.1 device (NOT USED for AUTHENTICATION)

  I try to get a USB Smart Card Reader * to work on related under VMware View 5.1 clones

  * not as an authentication device, just like a transmission of smart card reader

  Not tried:

  1 activated pass through card reader in the registry for the VMware view client

  2. active "allow redirection of card reader" in the policy active directory

  3. customer connected to view, selected USB drive list, connected to the customer

  After that, the card reader will appear with a "generic smart card", but it does not actually work.

  We executed the diagnosis of the smart card and he pointed out that the drivers are ok and windows service is ok, but the map can not be found.

  PS: When we tried first, about 2 weeks ago it worked, but it has suddenly stopped working. (Needless to say that the virtual machines and the Clients were restarted several times).

  Check that you have not installed the "PCoIP smart card Redirection" option during the installation of the agent. If it is present, it will redirect calls made RDP client smart card. Because you use a 'local' to the desktop USB drive, you don't want to do.

• OfficeJet 6480 problem w fax setup, will not pass through wireless phone

  OfficeJet 6480.

  I took 20 minutes on the phone to find someone to get me to tell them what the problem is.

  the first speaker gave me a ticket #8018531464

  and passed me on the real tech support (I think).

  Finally, I asked if I could please tell him what my problem.

  He said yes and asked if f I have the black cord that comes with it.

  I said 'yes' and he pulled the plug (1 line) on the 6480.

  He hung up on me!

  hahaha, nope, the wwas cord connecting the cable-modem (TimeWarner) jack to the panasonic cordless phone.

  in any case, I wasn't going to go through the introduction of 20 min. again, only to find out if he could answer the question.

  So here it is.

  When I connect the black cable supplied with (for a single line I think) telephone jack of the cable modem (they provide my dgital phone, internet and Cable only ESA, no data dedicated line because I have to go through a flurry of faxes from time to time at home.)

  then the decision-making ext 2 'lines' on the 6480, another cord goes to the single input based on the receiver of the wireless phone.

  This is the problem, no tone came thru.

  so, in this loop, I inserted the small adapter, single-jac + cord short. the output of the 6480.

  and plugges regular there cord to the cradle of the wireless.

  I had a tone. It seemed to work so far. So I went to bed, feeling successful, to continue to ensure that I had

  useful with my 6480 fax equipment.

  However the next day it did not get a dial tone on the phone.

  I tried different combinations and then abandoned once more imn frustration.

  I tried to get this thing to work for a few months now.

  Once I had the parts of the loop of any kitchen. someone should sent the fax and the 6480 a o ring...

  ringtone and ringtone.

  He hgave been other variants of this scenario which have brought to the point of frustration, I said why bother, I'll do it at work.

  and not being able to devote a lot of time and energy with this easy start home.

  now since I've been laid off, I shortly and more neceessitty to fix this problem.

  I think that the signal gets to the 6480, because I run the test and all passses. There is no test for what I am referrring to and none combined on the 6480.

  I went into the details for several reasons,

  I can omit something: oh, Yes, the router is a lynksys router.

  There is a nearby office using the wireless router and a laptop computer in the other room.

  plus, you get a little history, to learn something on me, as you go through the same routine that I do with technical support. HP is not the only culprit of this approach non-customer ceneterd. But even that does not make this right.

  I suggest, if some listen to those interested. This customer centered woould be to first know of me what is my problem, while you may, or may not, to solve. Then, you can collect the serial number, etc..

  In addition, since you ask the serial number, I would like, as a customer, with that number clearly presented in a convenient place, say in my opinion as I llook at the machine.

  Yes, I know, its probably on the back, probably there insert n close the caps. no doubt.

  but I have to do a flshlight, reading glasses and get the machine our of the arrangement.a clever, bulky, puzzle - like real aesthetic. It's b

  I hope to hear from anyone. Thank you.

  Here is the document on the implementation for different kinds of digital lines (think VOIP is not listed) that could work however, the fax modules used in probably all HP AIO are for analogue telephone lines only (the kind of Ma Bell telephone lines that have nothing to do with computers).  So, you could be just out of luck unless you want to pay for another standard analog line in your home for the fax.  Sorry to be the bearer of bad news, but makes no sense you need to beat your head in frustration on something that is not likely to ever work.  Oh and another thing - make absolutely sure that the telephone line is connected to the fax to send/receive is the one supplied with the printer, they are not your average phone cords that come with phones or you can pick up at the local super store.

• STR-DH520 component video

  I just moved into a house where they have a line consisting of the closet to the tv area. I have a Sony Bravia HD TV which has been great to work for a few years. I don't want to pull a HDMI cable in the tube where the sons of component are so I went and bought a Sony STF-DH520 a / audiovisual receiver. I hang a DVD and a Comcast HDMI in HDMI input on the receiver ports and plug a HDMI to the TV output. Works very well.

  I then try to use the Monitor Out on the receiver and connect a component video (red, blue, green) and I get no video on the TV. Then I try just the (composite) video cable to the video output on the back of the av receiver and no luck there.

  Did I miss something until I take this thing back to the store? Page 21 of the manual shows that I can have a HDMI or Component out to my TV output. It should work.
  http://store.Sony.com/wcsstore/SonyStyl... 248878.PDF

  Thanks for any help,
  Tom

  from page 22 in your manual
  "Entry of video signals to HDMI IN may
  only be transmitted via the HDMI TV OUTPUT
  Jack. Video input signals cannot be
  exit through the VIDEO OUT jacks or
  MONITOR OUT taken. »
  I think it is the way that most all receivers work. I would run the HDMI.

• Standard user can connect to the new network wireless only in local mode - no Internet pass through by the router.

  My wife now takes a laptop (HP Pavilion) with her on a business trip.  The computer that runs Windows Vista Ultimate 64-bit SP2 with all updates.  I have his set as a standard user account, just to keep him out of trouble.  However, with his own account, it can connect to a new wireless network, like a hotel or business she visits could offer.  But, invariably, she gets access 'local only' - no pass Internet through connectivity.  I had to give him the information of my account as an administrator, and then she is able to connect without difficulty.

  Of course, this isn't an ideal situation - standard user must be able to connect to the Internet through a new wireless network.  Otherwise, I should be able to change his account in such a way that it can be given to this authority without necessarily opening the entire system and its related vulnerabilities.
  Any help, suggestions or solutions?

  Hello

  I suggest you go through the information provided in the following link.

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx