Strange connectivity issues

Last week, I had intermittent problems with connectivity on my PC which is connected to the router via ethernet.
I use a mixture of Chrome & IE, Outlook for email and more. What happens is some pages don't is not loading (for example: I can't open gmail in IE, but I can't in Chrome), Google Talk connect (guard saying reconnection), Outlook says "disconnected" a lot of the time and so I can't send or receive mail during these periods. On the other hand, most of the sites properly.
Things I've tried:
Restart the PC
Restart the router
Disabling virus/malware protection temporarily
Running a malware scan
The call of the ISP
Reset all the settings of the browser and disabling modules
Flushing the DNS cache
Problem has not been resolved.
I have a laptop where everything works then I know it's specific to my PC.
Any suggestions welcome

Thanks for the suggestion. In fact, I worked on what it was, it was a program that I am required to run to access the home office network called FortiClient. I was not using the program, but it ran on the bar of tasks, and as soon as I closed it, all my problems solved network! It was strange because I had this program for 2 months before that and hasn't caused any problems.

Tags: Windows

Similar Questions

  • Strange connection issues

    Hello

    This problem started when I couldn't start the application server for PeopleSoft 8.9 on 8.49 tools and Oracle 11 g. I get the classic "could not sign the database" and "tpsvrinit() failed" messages:
    Do you wish to see the error messages in the APPSRV.LOG file? (y/n) [n] :y
    
    PSADMIN.4476 (0) [02/27/12 15:15:30](0) Begin boot attempt on domain HTEST91
    PSWATCHSRV.4216 (0) [02/27/12 15:15:39] Checking process status every 120 second
    s
    PSWATCHSRV.4216 (0) [02/27/12 15:15:39] Server started
    PSAPPSRV.2772 (0) [02/27/12 15:15:41](0) PeopleTools Release 8.49.03 (WinX86) st
    arting
    PSAPPSRV.2772 (0) [02/27/12 15:15:41](0) Cache Directory being used: E:\psoft\ht
    est89\appserv\HTEST91\CACHE\PSAPPSRV_2\
    PSAPPSRV.2772 (0) [02/27/12 15:15:41](1) GenMessageBox(0, 0, M): Database Signon
    : Could not sign on to database HTEST91 with user PSAPPS.
    PSAPPSRV.2772 (0) [02/27/12 15:15:41](0) Server failed to start
    PSWATCHSRV.4216 (0) [02/27/12 15:15:42] Shutting down
    PSADMIN.4476 (0) [02/27/12 15:15:48](0) End boot attempt on domain HTEST91
    
    
    Do you wish to see the error messages in the TUXLOG.022712 file? (y/n) [n] :y
    
    151530.PSWEB02!PSADMIN.4476: Begin  attempt on domain HTEST91
    151532.PSWEB02!tmadmin.1228.5884.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
    151535.PSWEB02!tmboot.5108.5236.-2: 02-27-2012: Tuxedo Version 9.1, 32-bit
    151535.PSWEB02!tmboot.5108.5236.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set
     to 60 seconds
    151535.PSWEB02!tmboot.5108.5236.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL o
    ption is selected
    151537.PSWEB02!BBL.5924.5928.0: 02-27-2012: Tuxedo Version 9.1, 32-bit, Patch Le
    vel 036
    151537.PSWEB02!BBL.5924.5928.0: LIBTUX_CAT:262: INFO: Standard main starting
    151539.PSWEB02!tmboot.6032.1536.-2: 02-27-2012: Tuxedo Version 9.1, 32-bit
    151539.PSWEB02!tmboot.6032.1536.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set
     to 60 seconds
    151539.PSWEB02!tmboot.6032.1536.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL o
    ption is selected
    151539.PSWEB02!PSWATCHSRV.4216.372.-2: 02-27-2012: Tuxedo Version 9.1, 32-bit
    151539.PSWEB02!PSWATCHSRV.4216.372.-2: LIBTUX_CAT:262: INFO: Standard main start
    ing
    151540.PSWEB02!PSAPPSRV.2772.6052.0: 02-27-2012: Tuxedo Version 9.1, 32-bit
    151540.PSWEB02!PSAPPSRV.2772.6052.0: LIBTUX_CAT:262: INFO: Standard main startin
    g
    151541.PSWEB02!PSAPPSRV.2772.6052.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
    151541.PSWEB02!tmboot.6032.1536.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error e
    ncountered; initiating user error handler
    151545.PSWEB02!BBL.5924.5928.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
    151548.PSWEB02!PSADMIN.4476: End boot attempt on domain HTEST91
    
    Press Enter to continue...
    I'm so went to check database connectivity, because the tpsvrinit() error usually means a connection error, sometimes only the sqlplus executable is not found. However I can connect the database very well from the same server using sqlplus.

    As for the Data Mover and application designer, I can only log in bootstrap mode. My PS/PS user seems invalid when I try to use the application designer. Here is the track of the client:
    PeopleTools 8.49.03 Client Trace - 2012-02-27 
      
    PID-Line  Time        Elapsed  Trace Data... 
    --------  --------  ---------- --------------------> 
     1-1      15.17.12             Tuxedo session opened {oprid='PS', appname='TwoTier', addr='//TwoTier:7000', open at 01E90688, pid=4940}
     1-2      15.17.12    0.455000 Cur#1.4940.HTEST91 RC=0 Dur=0.173000 Connect=Primary/HTEST91/people/
     1-3      15.17.12    0.002000 Cur#1.4940.HTEST91 RC=0 Dur=0.001000 COM Stmt=SELECT OWNERID FROM PS.PSDBOWNER WHERE DBNAME=:1
     1-4      15.17.12    0.007000 Cur#1.4940.HTEST91 RC=942 Dur=0.003000 COM Stmt=SELECT OWNERID, TOOLSREL, TO_CHAR(LASTREFRESHDTTM,'YYYY-MM-DD HH24:MI:SS'), TO_CHAR(LASTCHANGEDTTM,'YYYY-MM-DD HH24:MI:SS') FROM SYSADM.PSSTATUS
     1-5      15.17.12    0.007000 Cur#1.4940.HTEST91 RC=0 Dur=0.006000 Disconnect
    I guess the initial connection as people/peop1e has managed since there is another statement after that, that I can't make out, it's when do you have the connection failed? The next step should be to check the name of the database, but what does ' t run. Please share thoughts.

    So the only problem that I have a user id/password invalid? And what would be the correct way to change it? I tried the followig in Data Mover bootstrap with no luck:
    UPDATE PSOPRDEFN SET OPERPSWD = 'PS', ENCRYPTED = 0 WHERE OPRID = 'PS';
    Commit;
    
    ENCRYPT_PASSWORD PS;
    
    UPDATE PSACCESSPRFL
    set ACCESSID = 'SYSADM',
    ACCESSPSWD = '<password>',
    ENCRYPTED = 0
    WHERE SYMBOLICID = 'SYSADM1';
    Commit;
    
    ENCRYPT_PASSWORD *;
    Is it possible that the (people) login id is locked or has an invalid password? This should not be the case since it is a user of database and I can log on successfully.

    Thanks for any input.

    Best regards
    Honza

    Published by: Honza on February 27, 2012 06:33
    What is strange, is that when I use PS/PS connect with Data Mover, he connects with Boot Strap

    People user can selects on PSACCESSPRFL, PSSTATUS and PSOPRDEFN (which should make the grant.sql script).

    What is strange, is that when I use PS/PS connect with Data Mover, he connects with Boot Strap

    It's probably because this user (oracle) has privilege 'create session' where it should not.

    Nicolas.

  • connectivity issues mobile iPhone 7

    I have a new iPhone 7 jet black, so far I'm in love. But yesterday, I noticed an annoying problem. The phone loses the network connection (cell to the & t) and he no reconnect, it will remain just it saying no service. I have to go in airplane mode and outside to force it to look for the network connection.

    everyone knows this? and everybody understand what it could be?

    I already missed messages and a phone call. This could worsen as boring to become a problem. If anyone has any idea what this could be please give me a heads up!

    OH! Another thing I noticed, when the iPhone is connected my signal strength went from-102 to my 6 sec to-86 on my 7! Then when I am connected I am connected!

    Hello jpgraphx,

    Thank you for using communities Support from Apple. I know have a cell connection issue on your new iPhone, it's not what you expect. The good news are the following steps will help to solve your problem with loss of cellular data and see no Service and get your new iPhone works properly again.

    If you cannot connect to a cellular network or cellular data

    See you soon!

  • Mac pro wi - fi connectivity issues

    I have the same problem, it seems that many people have with Wi - Fi connectivity issues.  I just bought the Macbook Pro in December 2015.  My computer goes to sleep and when I open the hood it looks like I'm connected to wireless, but I'm really not!  I'm going to websites, and they won't open.  I disconnect my wi - fi and reconnect and sometimes it works, but sometimes I actually have to restart my computer.  For the moment, at the end of the day I'll stop my computer, then restart the morning I guess.  It sometimes seems to lose its connection during the day too, I guess because he falls asleep.  Very frustrated.  Just got this computer in December and have had this problem since I use the computer out of the box.  I was told it's because I haven't had my update of El Capitan, did, but it wasn't the problem.  Technical support suggested a few other things we also went through and those who did nothing either.  Don't know what the problem is or how to solve this problem, or even if I can if so many others have this problem.  I think it's a matter of Apple and the wish that they would be admitting the problem and try to find a solution.  Apple of love, but right now quite disappointed.  Quite expensive computer for issues that I am.  I went from a Dell for an Apple thinking it was the best thing since shirt pockets, hmmm...  I don't think it's any problem with our modem, wireless, router, etc., because we have other laptops, iPads, iPhones in this House and have NO problem.  So, I hope that everyone is not running out to buy new routers and modems because no doubt this is the problem at all.  PLEASE APPLE, DO SOMETHING TO FIX THIS!

    Hold down the Option key while you click on the wireless icon in the menu bar. You get a screen similar to the following:

    what you get for channel and mode PHY?

    What CISOS or the signal strength?

    What emission rates?

    very important and how many other networks do you see?

  • Hi my game Center leaves me not to accept friend requests, load any games im unable to load data because of connectivity issues and the King Games I have when you want to send queries, you need to connect whenever fbk his shit

    Hi my game Center won't let me load any games or accept friend requests and when I try to accept queries etc. of friends on my King of games it's connect to facebook every time his shit. phone says on the game center connectivity issues I am not worked before

    Hi, kitecatgirl.

    Please visit Apple support communities.

    I understand that you experience connectivity problems when you access Game Center accepting friend requests.  Here are some troubleshooting steps that I recommend to go through this problem.

    Get help

    If you are unable to connect to Game Center or stay connected, follow these steps:

    1. Make sure that you are connected to the Internet.
    2. If you cannot create an account or sign in to Game Center of in a game, try to create an account or sign in with the Game Center app.
    3. Sign out of Game Center, then reconnect. If you can not you connect to Game Center with an Apple ID, reset your password, or use another email address. To manage your Apple ID, see my Apple ID.
    4. If you use a connection Wi - Fi, be sure that your Wi-Fi router is configured for Game Center.
    5. If you can't connect to a Mac, continue with the steps to solve the sign in questions.

    If you have a problem with a game of Game Center, follow these steps:

    1. Make sure you have the latest version of the game. To check for updates, go to App Store > updates.
    2. Test your connection by using a different game. If you cannot connect with a specific friend or player in multiple games, they might need to check their Wi - Fi connection and router settings.
    3. On iOS, try opening the game to the home screen, rather than the inside Game Center.
    4. If you cannot resolve the problem, follow the steps described in the next section to report the problem to the developer.

    Game Center on your Mac or iOS device using

    See you soon

  • Pavilion g6: Atheros connection issues with Arris Modem

    Hi, I had the same problem with my laptop and Atheros network card, windows 7, it can not connect to the network with Arris modem but it works with other modems. I downdoaded the driver from the link you provided here, and it worked, my laptop connected to the network without problems, but after a month it stopped connecting to the network, I downloaded the driver again, but it did not work.

    @s_z,

    Hello and thanks for posting back.  Here is a link to a solution to problems of common connection to the problems of Atheros WLAN Driver and connection.

    Atheros WLAN Driver corrects connection issues with many new routers (Linksys, Netgear, D-Link, etc...)

    Please let me know how things are going.  Thanks again for posting and have a great day.

  • Connectivity issues while trying to connect in spades to MSN on the computer

    * Original title: msn Spades - he works?

    I can't log on to msn Spades; something about connectivity issues; can someone help here?

    Hi Steve-Bob,

    Thanks for posting your question in the Microsoft Community Forums. I'm sorry to hear that you are facing connectivity problems while trying to connect in spades to MSN on the computer.

    I imagine the inconvenience that you are experiencing. I will definitely help you with this.

    I would like more information about the issue.

    1. What is the exact error message?

    2. what browser you're using connection?

    3 have there been recent changes made on the computer before the show?

     

     

    If you are using internet explorer, please follow these methods and check if it helps.

    Method 1: Verify the problem by running Internet Explorer mode without modules.

    Temporarily disable all add-ons to see if the modules are the origin of the problem.

    To temporarily disable all add-ons:

    a. click the Start button.

    b. click on all programs, accessories, and click on system tools.

    c. click on Internet Explorer (No Add-ons).

    If the Internet Explorer (No Add-ons) mode works very well then an add-on may be causing the problem. You will need to re-enable each (process of elimination) in order to determine which one is causing the problem.

    http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

     

     

    Method 2: Optimize Internet Explorer and check.

     

    How to optimize Internet Explorer

    http://support.Microsoft.com/kb/936213/no

     

    Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

     

    For more information, visit the following link.

    Sign in using

    http://zone.MSN.com/en/support/article/supporthubsignin

     

     

    If the problem persists, feel free to let us know. It is our pleasure to be of service.

  • Database MS SQL Server with AIX server connectivity issues

    Hi all

    I am confronted with the below with the AIX server connectivity issues.

    Operating system: AIX 64 bit

    DB: SQL Server 2005

    EPM Version: Hyperion 11.1.1.4

    Error creating socket to host and port 1433. Reason: Connection timed out: could be due to an invalid address

    Tired of Solution

    (1) checked the properties of TCP/IP, its permitted.

    (2) ping the source and target servers both ends all works fine

    (3) firewall is DISABLED in DB Server

    Hi all

    My apologies, its number of firewall & network. Resolved by the Unix administrator.

    Thank you

  • SCSI local data store connectivity issues

    Hi all
    I installed the server ESXi 4.1 before six months. now, I've seen continuous events related to data store connectivity issues. I changed the SATA cable also, but it won't help. How can I fix this without interrupting the VMs.

    As ESXi before 5, it is located on the var

    You can find them easily by starting from the root directory of newspapers:

    var/log/messages of cat | grep vmkernel | less

  • MAC PRO CONNECTION ISSUES NOT IDENTIFIED

    So, I had serious problems with lag (ping spikes connection) on my computer.

    I use Mac Pro (mid-2010), and I used the 'ping - i.2 192.168.0.1 sudo"command in a terminal to monitor my ping. My ping stays constant at 1ms - 3ms, but always rises to 100ms to 200ms every 6 to 15 seconds. And these "spikes" happens literally every 6 to 15 seconds, but it's not crazy to ping 1000 or even above.

    The difference strikes me much since I play overall infringement of counter-strike on mac, which the PPE ping can be clearly felt.

    The strange thing is that I'm not under any program that downloads or downloads and the offset ONLY HAPPENS in THIS COMPUTER SPECIFIC. The offset can't on my laptop and all. What is going on? My speculation on this issue is probably my computer seems to be sending files or signals a, and that's when the ping comes up, but I just can't understand what is happening.

    The connection USED TO BE FINE. Is this a problem with features hidden in my mac network or what? I was about to try to disable the SSDP service, which seemed to be the cause of the delay of a few of my friends, but I don't know how, since her pimp.

    Any help would be really really really appreciated.

    Please read this message before doing anything.

    This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

    The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

    Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

    The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

    Test in safe mode. Same problem?

    After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

  • Strange connection with WRT54G2 problems

    As stated, I have a Linksys WRT54G2 (ver. 1).  The problem exists from the very beginning when I bought this router.  What is happening is that downstream data speeds slow down normal speed (11-15 Mbit/s) for barely more than 1 Mbps.  To temporarily correct the problem, I simply change the wireless channel.  When the channel is changed, my speed immediately return to normal 11-15Mbps (sometimes as high as 16 Mbit/s).  But here in 20 minutes, we at speeds just a shade over 1 MB/s.  Make lather, rinse, repeat.

    While looking for a real solution to the problem, I have:

    • Update the firmware on my router worm 1.0.04)is.  This does not resolve the issue.
    • Changed the type of wireless from WEP to WPA security.  This does not resolve the issue.
    • Past votes to zero WPA wireless security type.  This does not resolve the issue.
    • Changed IP address range of 50 machine from 192.168.1.100 to 10 machines from 192.168.1.150 (only 3 PC to connect to this router... when they are able).  This does not resolve the issue.

    Any ideas on this strange matter would be most appreciated!  Looking forward to your solutions!

    I searched the forum for you and found this info.

    In the router:

    Disable UPnP.  Under settings wireless Beacon Interval 75, RTS and Fragmentation threshold to 2304.  Save the settings, then try channel 1 or 11.  Try this.

  • PC HP Pavilion 15 15-p001tx: control wifi wireless connectivity issues

    Hello
    Member of the Community/Forum

    Model name - laptop Hp Pavilion 15 (15-p001TX)
    Questions - Brodcomm 802.11n wireless adapter not Worming.

    Problems-
    I was faced with the same problem for 4 days and I tried all possible means to resolve out, but nothing works.

    Problems are the following:-

    1) Wifi stopped working 15 minutes to restart the computer and the wifi icon is automatically limited, and then it automatically become the LAN (small PC icon) and after this phone get hanged every time.

    to re work I need for wtich forcefully from the power button.

    2) I followed all the tips and tricks to solve the problem and even take a Hp support helps solve this problem of wifi. but nothing works... no one has helped me on this problem.

    Here are the ways I've tried.

    1. that tick managent of power, I have UN ticked (from PROPERTIES)

    2. using the CMD, I reset

    3. I DID cofig automatic Wlan disable (and put it on startup)

    4. update the drivers to the latest Version.

    5 install the latest drivers from the HP website brodcomm or even other Web sites.

    No the above to help me out.

    3) all wired network work great, but when I swtich to wifi, it will automatically limited and then diirectly hang the entire notebook.

    Please please suggest the Suggestion and the ways out sorting valueable.

    He's really frustrated now, I do not understand what are the ways to my wifi on working condition.

    Thank you

    Kind regards

    Spoiler (Highlight to read)
    Spoiler (Highlight to read)
    Spoiler (Highlight to read)
    Spoiler (Highlight to read)
    Aditya Rai
    Aditya Rai

    Hello @adityarai82,

    Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

    I read your post about the WiFi problem and wanted to help you!  I understand that you have tried the troubleshooting steps a lot already, without success.

    Try to review these steps, offered by community member @Great-Christine-Tree:

    First of all, we have a step by step guide to guide you through the process of diagnosis here:
    Troubleshooting your wireless network and Internet access

    A second option is to try the following steps:
    Powercycle the network:
    1. turn off your laptop.
    2. unplug the power to your router.
    3. disconnect the power to your modem.
    4. wait at least 45 seconds.
    5 reconnect the modem and wait for it to come back online.
    6 plug in the router and wait for it to come back online.
    7. turn on your laptop and test your connection.

    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Reset the TCP/IP settings on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here , but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test an ethernet connection:
    Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

    Test another connection:
    Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

    If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

    Source: fixes Common for wireless connectivity problems.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • HP Envy TS m6-k015dx: HP Envy Bluetooth Windows 10 connectivity issues

    I've upgraded to Windows 10 recently (even if she will be as a downgrade) and have experienced problems with the wireless and bluetooth connectivity. specifically, I can't keep a solid connection on any wireless network while my bluetooth is turned on.

    He'll keep disconnection, and when he says that I have a stable connection I don't always get all internet.  He said that there is a problem of DNS probe.

    As well as wireless issue while bluetooth is turned on, I also had problems with the connection to an audio device via bluetooth.  I recently received Coulax QX8 bluetooth headphones and they connect on my phone (iPhone 6s), but when I try and connect to it on my laptop, it is not figure it out.  I activated the devices to the discovery of the notebook in the settings, but I still don't see it appear.  Help, please.

    And before all the messages about drivers, YES, I update my bluetooth and Wifi drivers, through both the HP Support help and directly by the driver and the Device Manager.

    Current drivers

    Bluetooth: Intel Wireless Bluetooth, version 18.1.1525.1445

    Wireless: Intel Centrino Wireless-N 2230, version 15.18.0.1

    Please let me know if bluetooth or wireless number, or if it's just with Windows 10 on this product!

    Hello @sambody47,

    Thanks for the quick response!

    Keep your eyes on Windows Update.  If ever the drivers become available for your product, it will be pushed through this program.  You can check this site for the drivers as well:

    HP products - where to find Windows 10 drivers and software for my model?

    Because Windows 10 drivers are not yet available for your product, on the site of HP; You can try to use the solutions on this site to work around the problem.  Please let me know the results:

    How to: install and update drivers in Windows 10

    If you're still having problems, try to use back to a previous generation option, in your system settings: HP Notebook PC - upgrade to Windows 10

    Remember that this feature is available only for 28 days, after the installation of Windows 10.  I hope this helps.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Kind regards!

  • Satellite Pro L550 - Realtek RTL8191SE Wlan connection issues

    Hello

    Affected by a big problem with my WLAN connection which is ongoing for about a month.
    I have problems with a very inconsistent connection.

    To start, turn on the laptop of its climate 50-50 I'll successfully connect to my internet. Once connected I constantly disconnect and reconnect, never reached a point of stability, as long as possible without hitch is about 30 minutes, and after this point it will repeat the process above in one or two minutes, making it impossible internet usage.

    After following various checks, I can confirm that this is NOT a router problem:

    -Several other devices around the home connect without the same problem
    -Have you tried the reset and restarted both modem and router without result
    -Used new Ethernet cables and checked the other son of bends or damage
    -Tried to change the frequency of router and the channel for better connectivity with no result
    -Tried to change the location of the router, the closest pass to the laptop for a greater power of the signal without any positive results

    Whenever he logs off, I go through a laborious task repetitive troubleshooting and although sometimes it solves the problem, so that it does only temporarily.

    Updates on computer and controls are as follows:

    -Install the latest drivers for my network card
    -The latest version of the BIOS for my laptop
    -J' tried UN-installing software and remove driver in Device Manager in the case of a corrupted driver, after re-booting works temporarily and then breaks down in the first 5 minutes
    -Tried using windows troubleshooting, which sometimes displays a message on my gateway by default, I don't know what that means well as
    -Tried to use other means of verification, connectivity doctor etc., no results
    -Tried to reset network cards
    -Tried to use an earlier version of the network card to check if the new drivers were the problem - no result
    -Tried resetting IP addresses IP conflict with other devices in the House, no results
    -Played hundreds of reboots

    I would like to point out that when using the LAN on my laptop my connection is quite well and I have the experience without interruption, I have also contacted my ISP to ask if there is ongoing network maintenance tasks and check if the internet I receive is consistent.

    Computer laptop specifications: -.

    Toshiba Satellite Pro L550
    Network card: Realtek RTL8191SE
    OS: Windows 7 x32bit

    The whole process is infuriating and I am at my wits end as to what to do, is, fuck my network card?

    NB:

    This could be a problem as the dust inside my computer laptop on the map, causing interference?
    The problem is much more prolific when I use Skype - might be a bandwidth issue?

    Open to the suggestions of many, and any help will be appreciated.

    Thank you.

    And all this occur with clean Windows 7 preinstalled that you got with your laptop (factory settings)?

  • Wi - fi connectivity issues

    Hello

    In my house a number of apple devices that connect wireless or an airport or any other wifi device. The issue I'm facing is only with the macbook pro. Every few minutes, it loses its internet connectivity without losing wifi connectivity. It is able to maintain filtration (e.g. teamviewer) connections but not to make new ones. It can ping the gateway, but not details. If I try to disconnect and reconnect to the same wifi device, or other (really makes no difference), then the problem is resolved for a small period of time.

    I tried to reset the PVRAM but that did not help.

    Any ideas, what could be, or what I might try?

    Thank you.

    Hello vasileiosg,

    I understand that you are having problems with a Wi - Fi connection on your MacBook Pro. Let's go over some troubleshooting to get this sorted out.

    The first thing I would try use Wireless Diagnostics when you run again the issue. This will scan your current configuration and make suggestions on what to do to solve it. Take a look at the first article below for more details.

    Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac.
    https://support.Apple.com/en-us/HT202663

    Now if it continues, another troubleshooting option is to create a new location for your Mac network. This is generally used for people who have different configurations to connect to internet, but it is also good to isolate Wi - Fi configurations. Open System Preferences and click on network , to help you get started. Read the article below to walk you deep in the details to create the new location. Once it is set, test connection to your Wi - Fi connection to see if it stops just accept new traffic as before.

    Using network locations (Mac OS X 10.6 and later)
    https://support.Apple.com/en-us/HT202480

    Take care

Maybe you are looking for

  • My Tecra M3 has caught a virus-help

    Can anyone recommend a good anti-virus software. I think having a virus since I was in the internet last night. My M3 starts fine and I can work with it, but whenever I have access to internet, I put on a 'internet - Shopping' page (rather not mentio

  • Float

    Hello Ex: How do I round floating point data ' 0.45 ' to ' 0.4 ' or ' 0.5? Thank you

  • day 2 old Canon Rebel T5 90% of the time its stuck in mode development in AI .wont take picture

    even when I push down once pushing halfway it just don't stop development and take the picture.especially inside I found this frustrating.it very said as BUSY all the time.I tried the other setting, but it does the same thing, is this new camera brok

  • Unable to use Outlook Express 6

    I have Outlook Express 6 and have never been able to use it, I've been using Firefox, but it certainly would be nice to use to be able to use Outlook Express.I know that the problem is with my incoming and outgoing server name, I don't know what is t

  • T410 with G.Skill DDR3 1600 4 GB?

    Can I put my T410 with G.Skill DDR3 1600 ram (4 gb * 2)? Is this compatible with T410? Or should I choose Mushkin 4 GB DDR3 1066? Price wise, no difference. Thank you.