Strange devices satellite U300-15 after the new installation of 64 bit Vista

I just got my Toshiba Satellite U300-159 (model No. PSU30E-07901NN5)

It was a display model used in the store where I bought, so I wanted to do a clean install.
Using the recovery cd did not work. (Something about some files than couln can't be read).
It is a really bothers me not at all because I want to run it with a clean Vista anyway, so I jumped into a Vista Home Premium 64-Bit UK + SP1 and installed it.

After that the installation was done, I ran windows update to get a little more drivers for the few items that not have installed correctly.

After that almost everything worked very well.

Except:
I had two entries in the called Device Manager device Base System. They are found under 'other devices '.
I have looked around the site of toshiba for the drivers, but can't find anything that seemed as if it was the thing that I was missing.
(Actually I'm not sure I've found the correct support page. I learned to http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp and was able to select 3 versions of U300. U300 - ST3091, ST3092-U300, U300-ST3094)

Everything on the PC works well: card reader, bluetooth, graphics card, wireless + LAN cable, keyboard shortcuts, sounds etc.
The only thing that is not working is when I put it in mode "Eve". The screen goes black, the powerled stays on and the fans continue to operate. It is not possible to bring him back again if.

Does anyone have an idea where to find these drivers?
Or maybe just sort the problem of sleep difficulty?

I reinstalled using the recovery CD and choose another language and thus skip the defective cd.
But the sleep problem was still there.

An update of the bios, mentioned in this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=32002&tstart=15 solved the problem.

I have always an idea that both devices are well...

Tags: Toshiba

Similar Questions

  • Cannot use windows update after the new installation of xp sp2

    Cannot use windows update after the new installation of xp sp2

    How to reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

    After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

    Hi TedWie,

    Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

    Windows XP SP3.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

    Windows XP SP2. (According to THE level of SP)

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

    Note:
    If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

    If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

    How to troubleshoot a SP3 Installation fails.

    http://support.Microsoft.com/kb/950718

    Let us know if this solves the problem.

  • Can not start the server of the University Complutense of MADRID after the new installation of 11.1.1.8 on Microsoft server 2008 R2 SP1 64-bit EA

    Hi all

    After the new installation of the WCC 11.1.1.8 on Microsoft server 2008 R2 SP1 64-bit UCM_server1 EE cannot start. (Please see trace below). WCC 11.1.1.7 work fine in this environment.

    Steps to follow:

    1. installation of jrockit - jdk1.6.0_45 - R28.2.7 - 4.1.0

    2. installation of WLS 10.3.6

    3. installation of the WCC 11.1.1.8

    4 creating the UCR 11.1.1.8 schema

    5. creation of field of config.cmd with AdminServer, UCM_server1, IBR_server1

    6. run Admin - (success)

    7 run (optional) NodeManager - (success)

    8 run UCM_server1 - failed

    Still not work after having patched MLR 1 for WCC 11.1.1.8 or upgrade 11.1.1.7.

    Log files we can see this problem caused by the JniNativeOsUtils.dll file in ' < Middleware Home > \Oracle_ECM1\ucm\idc\components\NativeOsUtils\lib\windows-amd64\7.2.1.1.

    I have replaced JniNativeOsUtils.dll with the same 11.1.1.7 file version and UCM_server1 started working

    I got errors when starting (syNativeOsUtilsNotLoaded and UnsatisfiedLinkError - you can raise in trace below), but COE upward and the works.

    I also get error when you try to start the utility SystemProperties or ComponentWithard:

    Activation context generation failed for "C:\Oracle\MIDDLE~1\USER_P~1\domains\WCC_DO~1\ucm\cs\bin\SystemProperties.exe." Load Assembly Microsoft.VC80.MFC, processorArchitecture = "amd64", publicKeyToken is "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.762' is not found. Please use sxstrace.exe for detailed diagnosis.

    Any ideas?

    Thank you

    Leon

    -------------------------------------------------------------------------------------------------------------------------

    ERROR:

    javax.servlet.ServletException: could not start a deployment of servers of IDC.

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1268)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: java.io.IOException: csServletFailedToFullyInitialize

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:139)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: intradoc.common.ServiceException:

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:252)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: intradoc.data.DataException:! Abandoned facility.

    at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:554)

    at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

    at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: intradoc.common.ServiceException:! csInitSecurityError

    at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:140)

    at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)

    at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

    at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

    at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)

    at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

    at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

    at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: intradoc.common.ServiceException:! syFileUtilsUnableToCreateSpecifiedDir, C:/Oracle/MEDIUM ~ 1/USER_P ~ 1/areas/WCC_DO ~ 1-AAU/cs/config/private

    at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:570)

    at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)

    at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)

    at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)

    at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:76)

    at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

    at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

    at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:574)

    at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

    at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

    at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: java.lang.AssertionError:! syNativeOsUtilsNotLoaded

    at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:452)

    to intradoc.common.NativeOsUtilsBase. < init > (NativeOsUtilsBase.java:360)

    to intradoc.common.NativeOsUtils. < init > (NativeOsUtils.java:28)

    at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)

    at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)

    at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)

    at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)

    at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)

    at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

    at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

    at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)

    at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

    at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

    at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: java.lang.UnsatisfiedLinkError: intradoc/common/NativeOsUtilsBase.getNativeVersion () Ljava/lang/String;

    at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:448)

    to intradoc.common.NativeOsUtilsBase. < init > (NativeOsUtilsBase.java:360)

    to intradoc.common.NativeOsUtils. < init > (NativeOsUtils.java:28)

    at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)

    at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)

    at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)

    at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)

    at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)

    at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

    at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

    at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)

    at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

    at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

    at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Hi all

    Cause of problems is the lack of 'Visual C++ 2005 SP1 Redistributable Package'

    Environment works great after installing the two versions (x 86 and x 64)

    Thank you

    Leon

  • Oracle 10g RMAN does not work in RHEL 4 after the new installation

    I downloaded Oracle 10 g R2 from OTN to self-training.
    I have the problem with the RMAN after the new Oracle 10 g installation in RedHat Enterprise Linux AS 4. (x 86)
    Everything works fine, the database mounted including EM, SQLPlus, iSQLPlus etc.

    But when I try to run the RMAN command on the terminal, nothing happens. No prompt, RMAN, no error message!

    I ran the command 'repeat all' but no help.

    Please advice.

    Published by: Surf888 on November 16, 2008 09:51

    I guess you're a common Linux 'victim', you call rman for Oracle, but a Linux executable:

    http://Linux.about.com/cs/linux101/g/RMAN.htm

    Check your PATH variable, you can move $ORACLE_HOME/bin to the top.

    Werner

  • Satellite A300: Vista 64 bits after the new installation by using the recovery disk

    I have a Toshiba Satellite A300 A300 / M00 and when I got it, it had Windows Vista Home Premium 32 Bit. But after awhile, I started to have problems so I decided to reinstall Vista on my laptop. After crossing with the product recovery media, my system become so 64-bit.

    Was not my system suppose to have 32-bit when it was originally with her?
    If no, then how can I install 32 bit once more on my laptop like 64-bit gives me problems with the installation of some of my programs.

    If I need to buy a copy of Vista 32 Bit, where can I find the drivers for my system, because the product recovery media has all the drivers on this subject.

    Thank you for your time.

    Hmm. Your ad is a little confusing.

    Why would you say that Toshiba Recovery disk contains a version of Vista 64-bit?
    How did you check that?
    From my experience, the Toshiba recovery disc still contains the preinstalled operating system.

    Also as much as I know the new notebook from Toshiba are not delivered with the recovery disk, but with a HARD drive recovery option.
    This option allows you to reinstall the OS from the second partition of HARD drive recovery.
    Alternatively, you can use the preinstalled Toshiba recovery disc creator software to create the own recovery DVDs! And this recovery disk contains the same preinstalled OS!

    Good bye

  • Satellite Pro U400-12y: how to use HDD recovery after the new installation of the OS

    Dear Sir

    I have the Satellite Pro U400-12y and give tem my friend use it when he gets back, the laptops it do format c: and reinstalled new windows.
    I try to do the recovery only by pressing f8 without answering.

    How can I recover my laptop to its state of origin as drive HARD recovery again in d:
    Thanks in adv

    Hello

    You will not be able to restore the factory settings because another operating system has been installed on the first partition.
    Usually by pressing F8 immediately after the laptop has been powered should allow the advanced on-screen menu. Here, you should choose option called repair my computer and Toshiba Recovery HARD drive.

    But if this doesn t work then you will not be able to use HARD drive recovery.
    In this case, you will need to order the new CD from here:

    https://backupmedia.Toshiba.EU/landing.aspx

    Good bye

  • Satellite 2450-201: cannot use TV option after the new installation of the OS

    Hello

    I have a laptop toshiba satellite 2450-201.
    I've always had the TV OUT works well with my TV, use the right cable SVIDEO.
    I was able to watch divx movies in my TV using my computer.

    I had to format the laptop and installed windows XP again.
    After that, I can't use more TV-OUT option, so that the image of the laptop could be seen on television, I've always had.
    After that I updated display drivers, but the problem remains.

    Can someone help me?
    Thank you

    Hello

    How do you reinstall the operating system? Have you used the recovery CD?
    Usually after the reinstallation of the operating system from the recovery CD, everything should work properly.
    It is important that you can switch to the TV. In this case, you can use FN + F5.
    If it's not working so I guess that for display devices hotkey utility works or was not installed. Well, the alternative is to pass on the TV via the graphic properties. The TV option, you should find somewhere in the advanced options.

    However, check it and check if you have installed all the drivers.

  • Satellite A100-847: after the new Virtual Sound Setup XP installation reports problem

    Hello

    I have a big problem with Toshiba Virtual Sound after installing Windows. After new installation Windows XP (Orginal CD not Toshiba Recovery Disk) and drivers (latest) the problem of the Virtual Sound Setup Report: is not possible to install Virtual Sound because not present this material!

    After you have reinstalled Windows, everything was OK (with Toshiba Recovery Disk). Thank you

    Hello

    Can I ask you what phone you have?

    You said something about installing all the drivers (most recent).
    Do you install all the drivers needed and just?
    The laptop runs correctly after installing the Toshiba Recovery CD because this CD contains all the drivers and all the important tools
    It occurs to me that you have not installed the drivers required

  • Satellite L40 - Wlan issue after the new installation of Vista

    Hello
    I have Toshiba Satellite L40 and I lost the recovery disk. So I download the drivers from the Toshiba website and install them. I have a new installation of windows Vista Home premium Edition SP1 also. But Atheros Wireless did not work properly. There a lock button icon status change not always off and the light is always too. But on the screen top left icon that shows the field of wireless connection there.

    Should I install any other updates vista? or am missing some other facility?

    Thanks for this short notice!

  • Satellite A100 PSAA9A: Cannot use fingerprint & keys Fn after the new installation of Vista

    Hello

    I am currently using toshiba A100 PSAA9A initially running a winxp pro sp2.
    But recently I received a window Vista on the other computer manufacturing so I reformat and installed.

    But after the installation, I checked all driver devices and they are all installed correctly.
    But I can't use fingerprints, as well as the shortcut key by pressing Fn more

    does anyone have a solution to this?
    Thank you very much

    Thanks for the info

  • After the new installation Mobo and CPU, HDD IDE does not start in XP.

    I have improved my Athlon XP a new motherboard with an Athlon XII after 5 years. XP does not start and gives the following error:

    0x0000007B (0xF789E528, 0xC0000034, 0x00000000)

    I guess that's due to the used on the boards of different drivers. I can't boot mode safe. How can I fix?

    Help, please. Thank you!

    Hello Riggs614

    After Exchange of this type of major equipment, you will have to make at least a "repair" of XP.

    A repair will not lose any data, other that the Service Pack (if not on CD), no matter what Windows updates and unsigned, drivers that will need to be re-installed later.

    Stay offline for repairs and not go online again without a firewall is activated. After the repair of XP, install the Service Pack (if necessary), firewall, then you must install to the all the critical updates then.

    How to fix XP.

    1. start the computer from your Windows XP CD.

    2. When you see the "Welcome" screen press [Enter] to start the configuration of Windows.

    Note: Do not choose "to repair a Windows XP installation using Recovery Console, press R", not wanting to load the Recovery Console.

    3. accept the license agreement and Windows will search for existing installations of Windows.

    4. Select the XP installation that you want to repair in the list, and then press [R] to start the repair. Setup copies the necessary files to the hard drive, and then restart.

    5. do not press a key to boot from CD when the message appears. Setup then continues as if she were doing a clean install, but your applications and settings are preserved.

    http://www.theeldergeek.com/repairing_windows_xp.htm

    Way to scroll to the bottom of page for

    Windows installation CD - repair current Installation

     

    http://michaelstevenstech.com/XPrepairinstall.htm

    .

  • Restore backup files after the new installation of Vista

    I recently had to replace my main hard drive as it has completely crashed and burned.  Fortunately, I thought, I had been diligently backing up to an external hard drive.   So after replaced by a fresh hard drive and a new installation of Vista, I thought I could just restore these files from backup... but no luck.  New Vista does not recognize the old Vista backup.  And it will allow me to migrate these files in any usable fashion.  Is it possible for me to get the new Vista installation to access these backups from the previous installation of Vista?

    Hi Allisonerik,

    (1) what happens when you try to restore?

    (2) you get an error message?

    (3) was it a file, or a backup system image?

    I want to clarify if your backup media (external hard drive) is recognizing in Windows.

    Method 1: Put the computer to boot and then check to see if you can restore

    Follow step 1 in the link below,
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

    Method 2: Check your external hard drive to find errors

    http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

    Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

    See the links below

    Backup and restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    Restore files from a backup

    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

    Thanks and greetings
    Ajay K
    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 7 Pro update is not after the new installation

    I know that this question is asked many times, but I tried pretty much everything that is suggested and nothing seems to work, some worked for others, but they have not worked for me.

    I have replaced a failed hard drive on a Lenovo X 200 an old laptop that I was giving away he a son of friends who needed just for the College.

    I stuck in an SSD and saw genuine window 7 Pro licenses as was previously on Vista, I made a new installation as I've done a hundred times before, and then as always update windows first, but I'm just update Windows scroll bar I left it all night nothing happened.

    I tried using the Microsoft Easy Fix times nothing.

    I tried Windows Update Agent still nothing.

    I tried a suggestion here that seemed to have worked for others install (KB3102810) I did as stated on this occasion, he worked told him there are 225 updates and 18 in option more, I jumped in option one it seemed to work very well it installed just 13 with the lack of rest I restarted as requested but recede in windows it says Windows is up to date, that was impossible.

    I clicked on update again and it does what it was originally just to get the scroll bar that I left for hours and nothing, this is seriously my head in, I think that Microsoft is not going like it the impression that I'm being bullied by installing Win 10 and the person wants to win 10 , because they prefer to Win 7.

    Please could someone help me on this pickle was on this thing now for almost 2 days of installation then put in solid form and re install all to nothing does not.

    I would seriously some knowledge on it.

    Concerning

    It was pointed out Alan

    Ken Morely has the solution.   Follow precisely...

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/following-a-clean-install-Windows-Update-remains/ff3c442e-79a6-40d3-AC35-29e130cebef1

    I've used several times, as many others have, and it does not have the problem you describe.

    Install all that it offers to the exception updates Windows that are not labeled security and are dated after 2014.  The reason is that all those who since have no value to your system and prepare your system to accept Win10 and provide information to Microsoft.

  • After the new installation of El Capitan, Illustrator will not open and says that it requires a certain version of Java. I uninstalled and need assistance, put it back in place, as well as the question of fixing once resettled Java

    After you install the new operating system of El Capitan for my macbook, Illustrator will not open and told me that I had to update my Java. When I followed the link provided with the message that popped up, it would not download on my computer for some reason any. After trying to solve the problem for hours, I finally uninstalled illustrator, but now I can't understand how to reinstall. I need help reinstalling the program and then fix the Java problem once it is reinstalled.

    magroot,

    For the Java download successfully, I think that you look here or here:

    https://jdk8.Java.NET/Download.html

    http://oliverdowling.com.au/2014/03/28/Java-SE-8-on-Mac-OS-x/

    For reassembly, you can download version:

    CC:

    http://www.Adobe.com/downloads.html?promoid=JZEFS

    Before CC:

    http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

    http://helpx.Adobe.com/Creative-Suite/KB/CS5-5-product-downloads.html

    http://helpx.Adobe.com/Creative-Suite/KB/CS5-product-downloads.html

    http://helpx.Adobe.com/Creative-Suite/KB/CS4-product-downloads.html

    http://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

    Note: If you have the version CS2 Premium Suite, you need to download the standard and then download Acrobat and GoLive separately under their own serial numbers for replacement.

    Be sure to update, as appropriate:

    Before CC:

    http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows

    http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh

Maybe you are looking for

  • Cannot open new tabs to the menu, with double click or Ctrl + T

    Has been using firefox without problems until this morning. Now impossible to get a new tab to open by double clicking on the tab or by selecting 'new tab' file, or by using CTRL + t. run OS x 10.6.8.

  • compactRio 9074 y or 9234

    Hola, estoy instalando compactRio 9074, pero al momento estoy tried el or 9234 not me appears peripheral opcion en the MAX pantalla como. No to TR is instalar has make solo o con is inserta in el compactRio, igual al initiates would call desde labvie

  • Need help to do a restore of the system on my XP Media Center 2004 (hp a1654n)

    If I try to use the HP System Restore function, a blue screen with: STOP: c0000218 If I try to use the HP recovery CD, a blue screen with: Stop 0x000007b

  • no option to connect to the network

    I tried to get on my internet on my laptop using my broadband and it keep asking me to select a network. but it is not giving me any option

  • Issue of ASA NAT and routing

    Hello I have a question about NAT and routing on the SAA. I'm relatively new to ASA and don't know if it works or not. I have a pool of public IP (209.x.x.x/28) that routes my ISP to the external interface of my ASA. IP was assigned address for the o