Strange Flash at the start of the Mac.

Similar Questions

• Strange behavior of the CAM Table SG300-28

  We have two switches SG300-38, both set to update to the latest firmware (1.1.2.0) and the two experience a strange problem in the MAC address Table. It seems that switches cannot learn the mac address, or forget too quickly learned in MACs.

  The switches have a very basic, just configuration of VLAN, but the problem is constant in all the VLANS. Whenever we start a file transfer, we can see (and we have confirmed with packet capture) traffic is flooded among all other ports.

  To test it, we added a few MACs static, and the traffic to these Mac works correctly.

  Please, can I do to stop this behavior? It seems that we have gone back to the time of the Hub!

  Natalio,

  This firmware fixed some issues with the MAC address tables. Factory reset switch and reconfigure and test it. I've seen a few problems when upgrading to the latest 1.1.2.0 fabless switches - 10% of cases have to factory reset reset.

  Jasbryan

• Cannot start a new conversation with relay of sms on the Mac or iPad.

  Very strange problem and I have tried seemingly everything. SMS relay works fine on all my Apple devices. I can send and receive messages either SMS or iMessage. However, I can't start a NEW conversation with relay. I can only answer to the conversations that are already started. (does not matter if I started or the other party)

  When I want to send texts to my boyfriend who doesn't have an active conversation in the list of messages I have to text him to my main iPhone (that the relay is activated on) and after that the convo appears right in messages on mac, the other my iPhone and my iPad, and I can continue to send messages from any device.

  I tried to close off the coast of relay and allows once again. Restart the phone. Restart the mac. Disabling iMessage on the iPhone. Ensure that all devices are on the same wifi network. A lot of things that shouldn't matter...

  A few tips here after a reset of the iPhone?

  Also note that my iPhone is running iOS 10 beta 2 now, BUT I had this problem for some time. Long before I had the beta version.

  Well, that's disappointing...

• Using the Flash drive when you use the Mac book Pro?

  I am currently trying to determine whether it would be useful to add an extra cost of £400 for the other half TB of Flash Drive when buying top spec Mac book Pro?

  Depends on your storage needs. You're OK with unloading of LARGE files on an external USB 3 drive? If so, you can save the $$$ and get the 256 GB.

  I have 256GB flash on my retina of MBP 2015 and that's a lot for me. If I start running out of space, I'll spend LARGE files my server or an external USB drive to free up space on my MBP of retina.

• I was using my MacBook today and it crashed and the dock turned silv, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock turned

  I was using my MacBook today and it crashed and the dock turned silver, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock has transformed money! I tried to restore Mac OS and then also the same!
  OS El Capitan

  This can help:

  Reboot safe mode (it is a slow process):

  -stop of the mac

  -Start up the mac in shift, press and hold until you see appear it to progress bar, so you can let go

  -When everything started, connect

  -Once connected, stop the mac once again, nothing else is necessary.

  -restart normally.

  Lex

  PS: This clears all system caches.

• Adobe Flash lost the connection @ 30%. Mac installation fails.

  I'm seeing this anywhere in the forums without anyone find a solution. I tried everything suggested in Safari or Firefox, including a clean install 3 times! Even after uninstalling and deleting the files flash in the library, when I try to download and install it immediately starts at 30% and then I get the error message "the connection interruption. Trying to connect... "it hangs a little bit and then I get"the connection has failed. Could not complete the installation. "I go to their link for assistance when the installation fails but the link which they suggest to download directly from the final step is"not FOUND ". See here: Installation problems | Flash Player | Mac

  This same link appears in several forums for a solution. I don't know what else to do. I write this option to add many others with the same question in the hope that Adobe will solve this problem! I'm on a MAC OS 10.9.5. Never had this problem before with flash updates!

  Solution found on another thread. Download the installer here offline: http://fpdownload.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx. dmg

  I downloaded and was able to install Flash correctly. Make sure you do a clean just to be safe installation.

• I get a strange behavior of the bar tabs and the address bar in Firefox 29,0 for Mac.

  I just installed Firefox 29,0 for Mac.
  I have a strange behavior of the bar tabs and the address bar with this new version.
  Instead of the address bar, I get two rows of symbols. And it is impossible to write anything in the address bar.
  (I add a screenshot, but I can't find a way to do it).

  Firefox has an RSS icon in the palette of the toolbar that you can drag a toolbar (but not on the location bar container).

  • Firefox menu button > Options/Preferences > toolbars
  • View > toolbars > customize

• One of the Mac have touchscreen, and they have a flash drive?

  one of the Mac have touchscreen and they have a flash drive?

  "Flash player" is usually referring to a USB key. Do you really want to say disk solid state drive (SSD)?

• I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

  I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

  Replace your hard drive.

  You have a backup of trust? If not, buy a disc of exterrnal for that as well.

  The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

• When Windows starts it is always a dialogue box that flashes on the screen and the CPU usage high (above 50%), after I connect sometimes for several minutes.

  Original title: at the start of Windows there is always a dialogue box that flashes on the screen, but I've known idea what it is.

  How can I determine which program is using this dialog box? I also don't expect high utilization of the processor (over 50%) after that I connect sometimes for several minutes. I see not all applications running in the Task Manager. The amount of CPU utilization in the services tab doesn't match what I see compared to what the gadget is read in my sidebar. Any ideas?

  Thanks in advance

  Hi Soan,

  1. What is exactly mentioned in the dialog box?

  2. when the problem started?

  3. did you of recent changes on the system?

  Method 1:

  Step 1:

  You can check if the problem occurs in safe mode.

  Start your computer in safe mode

  Step 2:

  If you are not faced with the question in safe mode, you can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2:

  You can read the following article and perform a full scan of security on your computer.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss. You can take a backup of important data before performing analysis.

  Method 3:

  You can also read the following article and try to optimize the performance of Windows Vista.

  Optimize the performance of Microsoft Windows Vista

  Hope this information is useful.

• Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  I left by mistake a USB in the port when I restarted my computer (Windows 7).

  Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  If I press ESC during startup and access the start menu, something marked WED... is highlighted and I press on enter and it starts normally.

  How can I get Windows 7 to do a normal boot without having to access the Boot Menu each time?

  Thank you.

  Tried that, but it did not work.  Finally got and IT guy come and it took him 3 1/2 hours to repair.

  Need a bootable floppy which has then repairs itself.

  Lesson learned.  Have an available for each computer startup disk.

• How can I find the MAC for Windows 7 Starter Edition address?

  How can I find the MAC for Windows 7 Starter Edition address?

  You use the same method as for all other versions of Windows:
  1. click on start, then type the three letters cmd into the search box and press ENTER.
  2. Enter the following command and press ENTER:

  ipconfig/all | more

  Search for the word "physical".

  Here's an alternative:
  1. click on start, then type the three letters cmd into the search box and press ENTER.
  2. Enter the following command and press ENTER:

  ipconfig/all > "% UserProfile%\Desktop\IP.txt".

  You can now double-click the IP.txt file to your desktop and review at your leisure.

• CS6 flash does not start after the first time.

  Hello! I installed Flash CS6 creative cloud in a previous version to open some old files. It works fine the first time you open it. After you close the it and try to open again, it shows the popup flash for a second and she disappears. Same thing over and over. After you uninstall and install again it opens for the first time and same problem after that.

  Any thoughts?

  It worked:

  Navigate to:

  C:\Users\«yourusername»\AppData\Local\Adobe\Flash CS6\en_US\Configuration

  There is a file fontinfo.txt. This opens up in Notepad and remove all what it and save it, but before you start again Flash, change the properties of this file fontinfo.txt for read only so Flash cannot crush him again.

• I can't get Adobe Flash Player to date on my Mac. It keeps telling me to close Safari, even if it is closed. I tried all the suggestions on the Adobe site and always get the same results. Thanks for any help

  I can't get Adobe Flash Player to date on my Mac. It keeps telling me to close Safari, even if it is closed. I have tried every thing on the Adobe site to solve the problem with the same results still. I went to the site of both Mac and said to go to Adobe for a solution. It worked fine as a new Mac in February, but it will not update now, so no Flash Player ay all. Thanks for any help.

  By clicking the red dot on the safari window it minimizes, but leave the program running.

  To exit Safari completely, open Safari by clicking on the dock icon, and then choose Safari > Quit Safari to the upper left of the screen.

• Flash player cannot start on the series of Photoshop help videos

  How can I run Flash player on the help of Photoshop video series (CS5 Extended)

  Refer to this:

  Flash Player Help. Installation problems | Mac OS

  Flash Player Help. Installation problems | Windows

  Mylenium