Strange horizontal lines on the 2nd monitor (TecS1 + ATI) multiscreen mode

Similar Questions

• Satellite Pro M10 - horizontal lines on the screen in different areas

  Hi all

  I hope someone can help.
  My Satellite Pro M10 seems to suffer a display problem where I have horizontal lines on the screen in different areas.
  It would be well for 10 minutes and when the laptop seems to warm up this problem begins, then shortly after
  The laptop would crash and enter in a resolution of 800 x 600 16 colors or sometimes freeze.

  Graphic drivers have been resettled, and even a new installation of Windows XP from the recovery CD does not help.
  A reboot doesn't solve what the same thing happens again and after one minute of use, so I thought it might be a video or cooling problem.
  I changed the video card I had a spare part of my last motherboard hoping this would solve the problems, but the problem persists.
  Perhaps a cooling problem? Or problems of motherboard?
  The motherboard has been replaced twice, hoping that this isn't another mobo problem.

  Any advice would be great.

  Thank you.

  Hello

  I m not 100% sure but to me it looks a bit like an overheating problem
  Maybe the graphics card may not be properly cooled after a certain period of time and that's why these strange horizontal lines appear on the screen.

  I wonder how you were able to replace the graphics chip on the motherboard?  :|
  If I m not wrong not the chip is fixed and the replacement is very easy and difficult

  It of always difficult to say what's maybe wrong without running several diagnostic tests in most cases this problem may be related to the defective chip or motherboard and so the following should be checked

  Sorry, but that's all I can suggest.

  Best regards from my friend

• HP EliteBook 8440p: white horizontal lines on the screen who retreat down in the minute

  Hi again. I've already posted about this so there are pictures and a full description of my post a few days ago. In short, when the laptop was arrested or sleep for more than a few hours, it is white horizontal lines on the lower part of the screen that slowly fade completely down. The lines do not appear on an external monitor in dual mode.

  I removed the screen twice now and checked / reinstall connections to the screen and under the keyboard. The problem persists.  I flashed the BIOS a few days ago and the problem persists. The webcam, microphone and WWAN/WLAN are all in perfect condition and the computer works fine apart from this problem of screen work.

  Until I drop the most money on this used laptop that is my only question at this point sounds as strictly a matter of cable/display on the screen? If it's a motherboard problem I would see other problems? If it is the graphics card goes wrong I would see other problems? As I said, the computer works perfectly once it is running.

  Anyone has any useful ideas?

  Hello

  You can try to connect this unit to an external monitor to check if there is a problem with the motherboard or display

  If the external monitor works fine, then there is no problem with the motherboard, only the display panel needs replacement.

  If the problem persists in the external monitor, suggest you to update the graphics drivers and see if the problem resolves

  I hope this helps

  #HPExpertDay

  Best regards;
  Jyo
  I am an employee of HP
  Please click the White Star Kudos to say thank you for helping.
  Please check accept as Solution if my help has solved your problem.

• Dv6 7246us horizontal line on the screen

  Hi all

  I have a DESIRE DV6-7246us, just updated to upgrade to 8.1 WIndows, yesterday, display fell asleep and trampled, I now have a flickering horizontal line at the top of page 1/3 of the screen. It is a single horizontal line that appears to wrap the text what ever he is going through, around the other side of the screen.  windows 8.1 upgrade was completed Monday, and the line began yesterday.  The computer is stock, with a genuine copy of Windows.  Please help I have runa small business, and this computer is invoked daily.

  Thank you

  Hello again,

  I could solve the problem with an updated graphics AMD HD SP60282 driver.  The only horizontal line has disappeared since I updated the driver.  Previously, it did not matter if I rebooted or the monitor kept awake, it never disappeared.  Now everything works as it should.  The driver can be found by searching SP60282 on the HP site.

  Thank you!

• The horizontal lines of the screen problems

  Hello

  Since I use Windows 7 X 64 on my T500 2241, I have problems with many small horizontal lines on the screen. The same one I have on an external monitor. With Win XP 32 bit, I never had such problems on this computer.

  May that this problem is related to the video driver. I use: Intel Mobile 4 Series express chipset driver version 8.15.10.2302. I had the latest bios update for my computer.

  Nothing helps. Y at - there a better idea?

  Thank you very much

  Michael

  Hi, I found following:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-74739&selectarea=support&tempsel...

  It works

  Thank you

  Best regards

  Michael

• NB 550 d - 11 d - horizontal line in the middle of my screen

  I have a toshiba NB 550 d - 11 d a few weeks ago.
  It has been very slow since the beginning.

  Then, the fan has started to be marketed all the time and now I see a horizontal line in the middle of my screen.

  Is that what I can do before I apply for coverage?

  Thank you
  ISA

  Hello

  I fear that the problem is related to a hardware problem m.
  The internal display is affected or the graphics chip on the motherboard is faulty.
  In both cases the hardware must be replaced
  Therefore, you should get in touch with a partner service is available in your country for this problem
  I hope that your warranty is valid

  Good luck

• Satellite L830 - horizontal line across the screen

  All new Satellite L830 has a horizontal line across the screen.

  What can be the cause and how can be fixed?

  If the laptop is brand new it back as soon as possible and ask for replacement.
  On this virtual path, it is not easy to say what the problem is here, but it may be related to faulty display, especially if you can see from the first moments when the laptop is turned on.

  Don't try anything. Request a new one. If you can not new, contact the nearest Toshiba service provider and ask for help. They need to exchange the defective part.

• HDMI output on Qosmio G40 - horizontal line on the screen

  I connect my Qosmio G40 to an 46F86BDX of Samsung LCD via HDMI. On all my films, when there is a shift, I see a horizontal line on the screen. Sometimes is in the middle of the screen, sometimes lower.

  I tried my pc with another TV and a different cable, but the same problem. Someone knows the same thing?

  Thanx

  Hello

  > On all my films, when there is a shift, I see a horizontal line on the screen.

  If I understand issue you this horizontal line appears ONLY on and external TV and ONLY if there is some faster movements of the pic.

  If so, then I think it has nothing to do with G40 Notepad.
  I have read that those issues could be related to the new TVs LCD then to watch movies in high definition.

  I think you should read a few tests and reports on similar issues on LCD TVs

  See you soon

• HP 15 laptop: flickering horizontal line at the top of the screen

  Hi, I bought this laptop 10 months ago and its been great until about a month ago. A month ago the hard drive doesn't work faster (Super slow r/w) and is noisy. 2 days ago a horizontal line at the top of the screen started flashing when I started the PC. Then I rebooted a few times and nothing. I finally found it flashes only when the pc is unplugged. I loaded 100% and it continues to blink. Update my display drivers did not help either.

  Video: https://www.youtube.com/watch?v=7zJioGvs2Bg

  In the video you can see lines flicker. When he started there was only one, but it has gradually increased to 4 sound at this time. Also, the line crosses the screen completely but is no longer visible to these 4 points.

  Hi @HelpMeFixPC,

  Yes for sure. Just please use the following link to create yourself a file number, then the call and it can help to speed up the process of appeal:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number are displayed.

  They will be happy to help you immediately.

  By clicking on the Thumbs Up below, you can say thank you!

  Thank you.

• little blue horizontal lines on the doc, I've done the nozzel check and head cleaning.

  All of a sudden one day when I print there are some blue horizontal lines on the doc, I've done the nozzel check and head cleaning. I have a 810

  Hello

  ·          What version of the operating system is running on your computer?

  Step 1: Check if the problem occurs on a test print.

  http://Windows.Microsoft.com/en-us/Windows7/print-a-test-page

• the 2nd monitor resolution

  Hi all

  I'm working on an application that uses 2 monitors.

  I have a VI that measures the resolution of the screen.

  I want to know the 2nd monitor resolution.

  How can I get that?

  Thank you

  Ritesh

  You can use a property node application, the display value-> AllMonitors. Index of this with an array and ungroup the result. This will give you information on the limits of the screen. By subtracting from left, right and top to bottom. You can get the size of the screen.

• Pavilion g7-1310us with horizontal lines on the screen

  G7-1310us Pavilion began to have horizontal lines on the screen one day ago. laptop is 8 months old. White lines on the screen. restart does not help. resolution 1600 x 900 of Intel(r) hd graphics family refresh rate 60 graphics 1 696 MB memory driver (20110809)

  If you see these lines in the BIOS and start-up also, this must be a hardware problem with LCD or may be damage also. Please contact HP support for warranty support as appropriate.

  Please contact HP support.
  Please visit http://www.HP.com/cposupport/Loc/ > select the country in the left hand bottom side (USA is selected by default) > on the next page, on the right side, click on the 'connect with HP' icon, you must have e-mail HP options or call HP.

  It will be useful.

• Non - generic pnp on the 2nd monitor and no sound

  Original title: generic Non - pnp on the 2nd monitor

  • 2 monitors... Left (23 1/2 ")... Law (21 1/2 ")
  • ........................................ DYNEX... AOC ENVISION series
  • The two usually run on 1920 x 1080
  • With the help of the ATI Radeon HD 5700 series
  • Both using VGA adapters convert
  1. Turn it on one day and the resolution is all screwed up after using an Xbox on the AOC (AV HDMI cords don't transfer sound for me)<---- might="">
  2. Cannot repair resolution of VGA resolution (?) (1600 x 900, 1440 x 900...) due to the generic Non-Plug-and-Play monitor.
  3. System Restore - nothing
  4. Drivers switch autour using AVG and other versions of Radeon. -fucking nothing but resolution
  5. Re-plug-nothing
  6. Defragmentation (desperate after 4 hours) - nothing
  7. Restart for the 100th time
  8. The computer stops at 'Starting Windows' screen and stops at halfway through safe mode.
  9. F8 F8 F8 F8 F8
  10. 'Repair your computer' - nothing
  11. Connect to the computer through Tablet and update all the drivers - back to step 2 of this ti time sometimes shows generic Non - pnp monitor and sometimes peripheral display watch on: laptop display even if my 2nd monitor displays and able to react to what I put on it.

  Monitor AOC is shifted from 3/4 "(black margin on the bottom) and an uncertain amount to the left (no right margin)."

  trying to be as helpful as possible, I have a lot of work to do and CS work is almost impossible for me without 2 monitors to work please help, thank you.
  UPDATE! : I had no sound.

  Mike,

  Disable the LogMeIn driver from Device Manager and check. There are a few reported issues where LogMeIn driver has disabled the aero thus also changed the screen resolution feature.

  -Click Start, and then press on and enter type Device Manager.
  -Double click on graphics cards to expand the video drivers.
  -Right-click on the LogMeIn mirror driver and then click on disable.
  -Restart the computer and see if that helps.

  You can try to uninstall the video drivers and then install the driver from the AMD website as given in my first answer.
  Note: it is there no trouble uninstalling the video driver. When the video driver is uninstalled, Windows starts with minimum VGA drivers. The resolution of the screen (icons on the screen) may look bigger, but after installing the latest video drivers, the screen resolution will be back to normal.

  Please try the following steps and answer results.

• Windows Media Center captures the pointer of the mouse on the 2nd monitor when WMC window is enlarged.

  My mouse pointer is captured on the 2nd monitor when the windows media center window is maximized on this screen. I can return the mouse to the main screen when the window of the wmc is reduced.

  Hi ijeff:

  One option is to move the Media Center window on the second monitor, and then expand the window to fill as much of the screen as possible by dragging an edge to the outside.  You can fill most of the screen that also and always use the mouse on each monitor.  The other option is to try pressing ALT + TAB to release the mouse in the Media Center window.  I think that worked in MCE2005, but currently I don't have a dual monitor set up to see if it still works.  Good luck!

• C20 discovered appears only not on the 2nd monitor after upgrade firmware to 6.1.1

  Used to run 5.x and if not on a call that the left monitor would display the menus and the wallpaper while the 2nd monitor would show the Self discovers C20

  If in a VC call key participants would be on the left monitor and discovered or presentation would be on right monitor

  When upgraded to 6.1.1 changed the scenario above:

  • If not on a call the left monitor would display the wallpaper and the menus and the 2nd monitor only show black, discovered in PIP mode on monitor left (codec is set to dual display)
  • If in a VC call, key participants would be on the left monitor and presentation on the right monitor but the display of the self are in PIP on left monitor

  Check the codec settings and everything is configured

  Thank you

  This is a common question. This is limitation of TC6 which will be set on TC6.2. Please, follow this topic:

  https://supportforums.Cisco.com/message/3965573#3965573

  Paulo Souza