Strange problem with BT Headset!

Hello

I have a very strange problem with BT headset.  My Z3 is model of official unlocked Docomo of SO - 01 G.  I got PlayStation Voxtube 500 BT headset BT version is THE 4.0.  This headset has been used with Nexus 5 (Android 5.1.1) without any problem and the battery last almost a week to stanby with a few minute talk time per day.  However, after not getting Z3 with Android 4.4.4, pairing with Voxtube has no problem.  Then, the battery is discharged within 4-5 hours stanby.  I tested it for 3 or 4 times, it has come down to that there must be something worng with the battery of the headset.

So, I got with PlayStation representative claim (it is only a few months old).  Surprisingly, representative of PlayStation has all the test suggested no stanby time problem with their phones iPhone 5 or Sumsung Galaxy S5.  Then I took back recharged so its performance is very short wait duration the same as before.  So, I tested it with my iPad Mini 3 and performance return to normal standby time.

So, it can be concluded for only problem is with the Z3. But once again with the mating with the other headset BT Jabra Tag2, stanby time is within the normal range (4-5 days).  When that happens?  I am very confused. Should I give up on PlayStation?

Thank you for your time,

Simply upgrade to 5.0.2 lolipop and hope this will help me on this issue.

Tags: Sony Phones

Similar Questions

  • I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

    I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

    In addition, the Console has opened with the same message several times, but I don't know what that means.

    Any help would be appreciated.

    Hello

    The last is a picture of the Terminal window.

    Just because it lists 'Console' does not mean that it has nothing to do with this application.

    You have not said why or what you're trying to install so I can't help with that.

    You can use the activity monitor to leave their.

    After you select an item, use the X in a type of stop sign icon and confirm force quit.

    21:36 Thursday; September 15, 2016

     iMac 2.5 Ghz i5 2011 (El Capitan)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro (Snow Leopard 10.6.8) 2 GB
     Mac OS X (10.6.8).
     iPhone and iPad (2)

  • strange problem with Ericsson H5321

    Hello

    I have a strange problem with Ericsson H5321 on my X 230. Until a few weeks ago, the card worked perfectly as a modem (at least on Linux, so I guess it would be too much work in Windows). Unfortunately, a few weeks ago disappeared from the network manager modem connection. I checked that all the special device for this files still exist:

    $ because I in/sys/class / * / * {ACM, wdm} * / device/interface; echo-n "${i}: ';" $ Cat {i}; fact
    / sys/Class/TTY/ttyACM0/Device/Interface: H5321 gw Broadband Mobile Modem
    / sys/Class/TTY/ttyACM1/Device/Interface: H5321 gw Mobile broadband data Modem
    / sys/Class/TTY/ttyACM2/Device/Interface: H5321 gw Mobile Broadband GPS Port
    / sys/Class/usbmisc/CDC-wdm1/Device/Interface: H5321 gw management of mobile devices to wide band
    / sys/Class/usbmisc/CDC-wdm2/Device/Interface: H5321 gw Mobile Broadband USIM Port
    $ lsusb | grep Ericsson

    .. .and I also checked it works like GPS (at least kind of: it generates data on/dev/ttyACM2 NMEA streams, but cannot get a GPS fix even after 45 minutes with access to an open sky).

    Then I tried to run windows 7 and the card is visible in the "Device Manager", but there is also no possibility to create the GSM connection in the connection menu in the bottom right.

    I tried a new install of Windows 7, I tried to reset the BIOS (even with the removal of the battery backup), but still I can't force them to work again. My BIOS is fully upgraded BTW: the problem appeared during the use of 2.61 and I also tried with recently published 2.62.

    My cell phone is always on the extended warranty, but as modem bought in line with the basic configuration it was only covered by the warranty of 12 months has expired

    Today it came to my mind that, as the modem itself seems a little work (present, responsive GPS device) then maybe it's a SIM card reader that is actually damaged (which would explain a bit why the camera itself is present, but I can't create a connection). Can someone confirm or deny my theory? If it is valid, then I could still replace SIM card reader because it is part of the basic configuration.

    Thanks a lot for your suggestions!

    [Mystery solved: I managed to put the SIM card on a wrong side...;]
    [I hate myself so muuuuch;]
    ([btw: Lenovo could fix their SIM card reader, so there is only one possible way to put a SIM card using his corner of heart: it would have saved me 2 days of stress and an investigation;]) )

  • Strange problem with HP OfficeJet 6500 709n

    I have a very strange problem with my printer HP 6500 E709n wireless network.  I have recently upgraded to Windows 8 and everything worked well.  Then, all of a sudden I wasn't able to scan more.  The HP Solution Center says that the printer is disconnected.

    The weird part is that it appears in the section of Control Panel as active and properly connected printer and devices and I can still print to it, but not scan to it. He also says in the network section of the HP solutions center that the printer is connected and ready.  The printer is connected to my wireless network and I also use it with a Mac Mini.  The Mac can print and scan to it.

    No idea why this is happening and how to fix it?  Thank you.

    This problem of not being able to scan only started after upgrade to Windows 8?

    If so, then to solve the problem, you must first uninstall the Windows 7 software and then reinstall the software of Windows 8 long.

    To uninstall the software, follow these steps:

    1 right-click or press on and hold the lower left corner of the screen, then click or type programs and features. A list of installed programs.
    2. click or tap the name of your HP printer, and then click or tap on uninstall.
    3. follow the on-screen instructions to uninstall the software.

    After you have uninstalled it, go ahead and download the full software features for your printer. It can be found on the link below.

    Driver and HP Officejet Full Feature software

    Install this version of the software and try to scan now!

    Let me know if it works for you, good luck!

    -Kyle

  • Strange problems with the database

    Hello

    I just got my Fuze and am very happy with it; However, I am having a very strange problem with the database. I have a 16 GB sdhc card that I use with the "rocket" and there are about 4 songs on the card that will not play and have no information charge tag. Their tags appear in the tag browser (not the in the track information screen) as just an empty rectangle. Under the track information screen, sizes are listed as ~ 4000 mb. The songs will not play and I can not jump in front of one of these songs once they were loaded.

    At first, I suspected some kind of corruption of tag, so I set out that night to track down the problem. I removed the 16 GB card and reset the player. Then, I loaded one of the corrupt in the internal memory of the player. The track has been scanned and played correctly. Then, I removed the track of the internal memory and it loaded on another SDHC card. Yet once, everything worked correctly, so I knew that the card I was using was a kind of system files or physical problem. I returned the original 16 GB sdhc card in the reader and checked that the file was still unplayable, and then I plugged the "rocket" to my computer. I transferred the unplayable file on my computer and compared (with md5sum) to the original file, thinking that if there was the file system or physical corruption the copy of the map would be damaged. However, the files were equivalent.

    To make things even more interesting, I also have problems with the registration of the kind. I have some files tagged Genres such as 'Classic' and 'Rock '. In the list of the genre, I see this:

    C

    CL

    CLA

    CLAS

    Class

    Classic

    Classic

    Classica

    Classic

    Rock

    So, there is corruption on the kind of 'Classic' but not the kind of "Rock". Each of the substrings of 'Classic' contains only a few titles, with most of the other titles listed where they should be. I checked that the tracks are labeled correctly and in exactly the same way as the other tracks that do not have this problem.

    I am at a total loss about what to do, and I'd really appreciate any advice or suggestions. I use the current firmware, 2.03.31a and the songs in question are in Ogg Vorbis format.

    MM

    Thanks for your replies.

    I managed to find what may be the problem. Tracks that received corrupt tags had the names of total path with more than 256 characters. It seems that the driver internal fat32 the rocket uses vomits all over the place when the path name is too long. Before the "rocket", I got an iPod running rockbox tags with the same directory structure that I have on the "rocket", so I don't think that this restriction on the length of the path name is a limitation or requirement of the fat32 file system. Reduce the path corrected the problem with the files being unreadable.

    However, the problem with foires genres the rest. Looking at the files show that corruption, they all have a little information in tags. Most of the information is contained in the hashes I have files that identify them via musicbrainz. The limit on the total number of characters in the tags of the track includes the "rocket" label is not read or use?

    MM

  • Strange problem with HorizontalFieldManager - it does not show on real device bitmap

    I have a rather strange problem with the HorizontalFieldManager on my Blackberry 8820, which I did not on the Simulator, or done other blackberries that I tried to install my game.

    The problem is that bitmaps that I add, do not appear on the actual device, as in the images below. The code is provided below as well. No idea how to debug, or resolve is appreciated.

    Here's what I see on Simulator and some devices

    Here's what I see on the real blackberry:

    Code:

    ......

    OK, I found the solution - the problem is that there seems to be a bug where you can't put more fields button radio on a horizontal layout manager with 4.2.2.x.

    The solution is to extend the RadioButtonField field and replace the positioning method:

    RadioButtonField radioField = new RadioButtonHack ("", textureGroup, isSelected);

    SerializableAttribute public class RadioButtonHack extends RadioButtonField {}

    public RadioButtonHack() {}
    Super();
    }

    public RadioButtonHack (String label, group RadioButtonGroup,
    Boolean selected, long style) {}
    Super (label, group, selected, style);
    }

    public RadioButtonHack (String label, group RadioButtonGroup,
    Boolean selected) {}
    Super (label, selected group);
    }

    public RadioButtonHack (label As String) {}
    Super (label);
    }

    Protected Sub layout (int width, int height) {}
    int temp = this.getPreferredWidth ();
    setExtent (time, height);
    Super.Layout (time, height);
    }

    }

    resolved http://supportforums.blackberry.com/t5/Java-Development/radiobuttonGroup-related-problem-in-storm/m-...

  • Strange problem with ASDM

    Hi, today we had a strange problem with one of our 5550. I worked through ASDM on it and all of a sudden I couldn't connect via asdm on the interface of management or inside interface. Nothing helps.

    When I connected with a vpn, then use asdm, it works. My ip on the network when it did not work was 1xx.xxx.81.235. When I use the vpn is a 1xx.xxx.55.1 from a different ip address. I can build a connection on the inside interface with asdm (with vpn).

    I tried closed and without stop the interface of man, that does not.

    It may be that the things asa, I am an intruder and dynamically blocks my netwerk range? If yes where can I find this info.

    Other users of our team had the same problem.

    I also checked the syslog nothing.

    THX,

    Marc

    Although I've ever experienced this myself, but if the running-config has not changed and worked before its possible that the ASA

    may have shunned your connection?

    To the CLI:

    # sh shun

    look if your IP address is present, if any make:

    # claire shun

    http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/protect.html#wp1058270

    More than likely it is do to a change to the running configuration, I would start by looking at a previously working with the gift of running-config running-config.

  • strange problem with the database link

    Hello world

    I have a strange problem with the link of database in Oracle 11 g Express Edition;
    There are two computers: computer-server and the client computer. Tnsnames.ora are the same on both computers IE.

    CT =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
    )
    (CONNECT_DATA = (SERVICE_NAME = XE)
    )
    )

    I created the database link:

    Create database link zdalny
    Connect to < user_id > identified by < password >
    using "CT".

    Customer cannot connect with server when I do not use above the command. But when I change 'use' for using "krzysztof:1521" or by using "krzysztof" or "server IP:1521" - everything is ok.

    Why I ask. Because in all the materials that I read about Oracle command with the help of "CT" should work correct. But there is no. Do you know why?

    Thanks in advance and apologize me for my English.

    Rgds
    Krzysztof

    Here's the tnsnames of your server, but to connect to the oracle server db (any client or to another instance of db oracle), you must install oracle client.
    However, in your condition, you want to connect the DB1 Oracle OracleDB2 using a link db, I'm right? In this case you should always set the entry in the tnsnames.ora
    To verify that you can connect to Oracle DB2 from DB1 Oracle, you can use tnsping in the command line.
    In your case

    c:\tnsping CT
    

    Krzysztof Szymaniak wrote: CT =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = XE)
    )
    )

    Check your tnsnames entry in the machine, you are trying to connect to. And check if the tnsping is successful.
    Sometimes the error message says not everything, which means that you need to troubleshoot yourself and learn from the experience.
    Always in the opposite case, refer to the documentation.

    See you soon.

    Published by: Spongebob December 14, 2011 09:30

  • Strange problem with find/replace

    I'll have a little strange problem with find/change in InDesign CS4 Mac.

    The document is a data merge.  In the worksheet, there are two fields that contain either a '@' or a '&', depending on the context.  These are just placeholders - the plan was to convert glyphs of the police 'Wingdings 2' after creating the merged document.  We do it this way because we couldn't figure out how to get the glyphs themselves in the .csv file.  Two glyphs are < FO54 > and < FO56 >.

    First I used find/replace to change all the '@' symbols to < FO54 >.  That has worked well. But then when I tried to change the symbols "&" < FO56 >, I got the < FO54 > again instead.  In fact, now I ask what glyph, I get < FO54 >.  Find/replace always normally works for normal text... it of just that he seems to have decided that if I ask a glyph, I get < FO54 >, anything.

    I tried to shut down and restart, but the bug is still there.

    Any thoughts?

    I used the tabs of glyphs in find/replace when I tested it, but what you describe seems to work as well.

  • Strange problem with export to jpg files

    I'm having a strange problem with exporting my vector files to jpg.  When I export the file as a .jpg file, then open it some text or shapes (such as rectangles or squares) have disappeared.  When I go back and open the file .ai the stuff is there, but he just went on the jpg.  If I open the .ai file in Photoshop it's gone too.  I have to save the file in pdf format, then open the PDF in Photoshop and export in a file .jpg away.  It's very strange.  If I go into the Illustrator file and re - type the text disapers, it usually fixes the problem.  I'm not an expert with Illustrator, then I can do something wrong, if anyone can help please let me know, thanks! (I have CS3)

    Things that are disppearing are defined for a recovery? Look in Control Panel attributes with objects selected and see if all the overprints are defined.

  • Strange problem with the formatting of the text

    Hello

    I had a strange problem with the formatting of the text. I created a document in Polish language and the strange thing happens when it divides the word to the next line. For example here on this part of the page, I have a word "umieszczamy", which should be divided "' u - CEF - szcza - my", but my Indesign divides in umi-eszczamy (as shown on the picture). " How can I fix it so it divides the word correctly?

    Concerning

    forum.jpg

    What language is awarded when you select the text? Hyphenation, but also the spelling, is controlled by the dictionary that is assigned to the text.

    If the language is correct, you might have to change the hyphenation in the user dictionary.

  • Strange problem with measurement of the color under Mac.

    Hello, I have a strange problem with measurement of the color under Mac. For example I create a gradient in Photoshop color 200 200 200 color 240 240 240. When I measure the color of the gradient with the Photoshop color measurement tool or with the built in OS X color measurement tool measured color is of 200 199 197 to 240 240 238. I measured the same gradient with Photoshop for PC and the values are OK (the same values that I create).

    I don't know what the problem is, but I think that the colors that I create are the same I have measure after creating them and also values between Mac and PC. I appreciate much help or information you could give me that helps me understand what is happening here.

    Thank you for your time

    Marcelo.

    Yep, you guessed it, evidence as monitor basically removes all profiling and just offer it right.

    is it possible to make the OS X color measurement tool to measure the original color values

    You mean the colors of paper - No., as I said photoshop filter your image through the profile document, proof of installation and the monitor profile. Why use Digital color meter for this though?

    I don't understand what is measurement of color values that will change every time point calibrate it my monitor.

    Because color values are "larger" what is on your monitor. Your monitor (via photoshop) makes only the best he can to display these values, which can be anything from LAB colors outside the range of your monitor - to the CMYK color. Calibration, it is the only way to allow your monitor to do this in any way accurately. (never really impossible) The monitors have a certain range and are only representations / would the REAL colors who is the holder of a document, with a profile. There's only one good reason to measure the monitor values so that is to build a monitor profile.

  • Strange problems with Firefox!

    Hello.
    I am a user of Mozilla Firefox about 3 years. I use it on my desktop and on my laptop. in the PC, I have no problem; but in the laptop, I have strange problems. I searched this problem to support Mozilla and Google also! but I can't find any answer.
    Also, I have reset Firefox and problem resists. even I uninstall and install after. but the problem remains.
    Now, I'm under Firefox 22.0.

    Problems:
    1. download icon in the header does not work. ( http://www.8pic.ir/viewer.php?file=30576184770845961788.jpg )
    2. sometimes I can't switch between tabs.the there is no need to click!
    3 Middle click of the mouse to move around the page work; but its icon is not displayed! ( http://www.8pic.ir/viewer.php?file=44434592402706809052.jpg )
    4. some of the Add-ons not work! for example; I use "Video download 1.97.2 pure", but its icon in the header will work not (just like the download icon that mentioned in 1). There is no need to click! (I use this add-on in my PC and it works).

    Hello

    Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

    (If you use it, switch to the default theme).

    • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

    Once you get the pop-up, simply select "" boot mode safe. "

    If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. It might help others who have the same problem.

    Thank you.

  • Satellite Pro C850 - strange problem with LAN connection

    Hello world

    I just signed up on this forum because I hope you guys can help me with a really strange problem.

    I recently bought a Satellite Pro C850-1MX
    It came with Win8, but given that I don't really like Win8, I bought an additional Windows 7 Pro (64 bit) license and installed on the laptop.

    The problem I describe, also arrived on 8 to win, which makes it even more strange.

    As soon as I connect a cable to the RJ-45 port, Windows tells me, that the LAN connection is not connected.
    As soon as I unplug the cable, Windows starts looking for a network and actually found one!

    So, the only way to connect to my LAN cable is... I have activate the LAN connection, wait that it detects a network (without the cable connected!) and meanwhile to connect the cable to the network port.
    Now... If I disconnect the cable once again, Windows still shows its connected.

    I must say, that I am a Director of professional network for more than 10 years now, so I should know my systems, but this never happened to me before. Event log shows nothing, re-installing drivers did nothing either. IM quite confused here and I hope you guys can help me.

    Thanks for reading, and let me know if you need any additional info!

    Greetings from the Germany,
    Sandro

    Hello Sandro,

    To be honest I confused m.

    I would try to start talking about the drivers installed, since you changed the system for Win 7.
    All the network devices, such as card WLan and LAN card are properly recognized in Device Manager?

    As I m not wrong not the laptop was equipped with a network card Realtek-8111F (1000BASE-T/100Base-TX/10Base-T) and WLan RTL8723AE Realtek b/g/n card.
    If both should appear in the device properly Manager if you have installed the drivers correctly.

    2nd question:
    You said:
    > As soon as I unplug the cable, Windows starts looking for a network and actually found one!
    Are you sure that you speak of LAN and WLAN?
    For me it made no further since. If the network cable is unplugged, the notebook would connect to the WLan where WiFi is enabled.

  • Satellite L850 - 1 H 4 - a strange problem with the FN key

    Hello

    I have a strange problem on my laptop. When I uninstall my PVAT my start "FN" key works, when I install it it s not working not properly. Its market not only the volume key (F9 and F10) without pressing the "Fn", if I want to press F9 or F10 I have to press FN + F9, even with the rest of the buttons.

    When I install PVAT I have to press FN, so I can use my F keys (e.g. F3 to search on the browser tool, alt + f4 - I have to press Fn + alt + f4), and I can't use real functions like mute, disable Touchpad etc. Use the volume keys only. Y at - it a problem if I run my computer without PVAT, this may affect its performance?

    Where could be the problem and can I fix it? I'm with Windows7 x 64, but the laptop was with no OS when I bought it. And there is a problem with this version, I bought its impossible to install the Pakc3 Service, it s with SP1, can be the problem? I put t know what to do... perhaps I run the laptop without PVAT, sounds good, because the buttons work fine without it, but I don't know if it interacts with something else.

    Thanks in advance!

    Its possible to use the function buttons by pressing another button without the use of the fn or FN.
    This option can be changed in the BIOS.

    Go to the BIOS by pressing F2.
    In the BIOS, choose Advanced-> system configuration Options
    Here you should find the option that allows to change the special function keys which allows you to use the function FN or without button Fn button

    By the way: this theme has already spoken here in the forum several times. therefore recommend that you use the advanced search to Forums before posting new thread

Maybe you are looking for

  • High CPU consumption (always between 12 and 30%)

    I am running Firefox 9.0.1 for Mac. Until the upgrade to version 9.0.1 I had no use of high CPU problems... I've now must constantly between 12% and 30% of CPU and up to sometimes use much further than that, which really slows down my Mac to a point

  • Re: NB200 - automatic plug-and-play for Ethernet cable

    Do you know why I don't have automatic plug-and-play, when I connect to internet ethernet cable on my NB200?

  • Need help to repair xp do not remember addmi. password

    In trying to repair xp, he asks an addmin. password. I don't know it.

  • Unable to start Windows Vista

    original title: problem with windows vista home premium does ON WITH HER... WINDOWS DOES NOT... I HAVE TO USE THE SAFE MODE ON... Help! I had a problem with this windows... I think its 8-16 bit... When I turn on my laptop, the windows no longer works

  • OfficeJet 4630 cannot print from Word 2013

    Hello! I bought a printer all-in-one Officejet 4630 a few months ago, and all went well until a few days ago: all of a sudden, I was unable to print Word files (2013), or Notepad files ("the parameter is incorrect" message). Printing of PDF files and