Strange problem with call manager and call before all

Similar Questions

• Strange problem with the KING and IMAQ find right 3 edges

  So first of all, I noticed that the KING produced by KING features seems to have an incompatibility with the entrance to find right IMAQ 3 edges:

  

  In my code, I have the strange problem "IMAQ find right edges 3" is the production of edges that lie outside the limits by the wired KING specifided: "."

  

  In this case, a return on investment, defined by a rectangle, I [476, 1559, 752, 1779], but the best line produced by VI shape is outside this rectangle (see ordered 1876).

  How is that possible?

  I finally thought to it - it was my fault. I was updating the global rectangle in the KING entered correctly, but not the contours.

  I fixed the wiring and now it works fine.

  Detective Conan!

  G

• Problems with Recovery Manager and wireless

  Hey everybody,

  I have an a HP Pavilion dv7-1245dx with Vista 64 bit.

  My HARD drive crashed after that the computer was hit. I bought a replacement hard drive, but could not use the HP Recovery Manager because my recovery disks were lost when I recently moved into a new House.

  I managed to get the Vista desktop of base up and running again, but without video card or wireless capability. To resolve this problem, I tried to re - install my drivers for hardware manually via

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2100&LC=en&cc=us&DLC=en&sw_lang=&product=3860...

  However, whenever I try to install Recovery Manager, I get say an error message: "this Setup program cannot be installed on this system, Installation with abandon!" InstallShield.

  Also, I tried to download and install all drivers wireless on the HP site, but I can't always operational wireless capability. Even after that I installed all drivers, Device Manager still does not recognize the wireless device.

  Any thoughts on solutions to these problems? Buy the HP recovery disk or install a new operating system Windows 7 would help solve these problems? Is it possible any other hardware become damaged when the computer was hit, and that is what causes these problems? Thank you.

  -NDEco

  Vidya,

  This problem solved-I had the drivers for the wireless and then updated the rest of the material from there. Thanks again for your help!

  -NDEco

• Problem with Media Manager and resolve blackBerry Smartphones

  My old computer died and I bought an Acer Aspire one (mini laptop, a bit like a netbook) and the resolution is not sufficient to run the Media Manager. I need to be able to transfer files (specifically of word, excel and power point) to my Storm. Can I get the media manager? Or do I have to find another way to transfer files (and how I do that)?

  Thank you

  Hi and welcome to the forums!

  You can use a PC for the transfer of information between the PC and the media card.
  Basically you focus for the BB and PC USB. Don't use office
  Manager. Go to 'My Computer' on the PC and the BB will be displayed as a flash drive.
  Then you can "drag and drop" files on the BB.
  Use the following settings in the option of memory of the storm:

  Card support ON

  NONE encryption mode

  (Storm AND "BOLD" only) Media Transfer Protocol

  WE support mass storage

  Auto enable mass storage support when it is connected TO

  Thank you

  Bifocals

• Strange problem with card sound and speakers on my Satellite A100

  Hi all

  I bought a Platinum ION (which converts documents in digital format) and oddly I can't find their tech support site (but this is another story, I guess).

  I connected it via USB on my laptop A100...

  Vista installed some drivers and now my speakers do not work - (peripheral output Audio n is installed - says VISTA).

  I tried a VISTA system restore (which failed) and a (just as ineffective) BIOS update. Now I think I want to re - install regardless of its card driver has the A100. Any ideas? Any help is greatly appreciated.

  Ty.

  Hello

  It's really weird that a USB turntable brings speakers do not want to work more. I suggest you to visit the Web to Realtek site (since your audiochipset is a realtek HD) and reinstall the drivers.

  Just go to the main site and download drivers, hope it helps: www.realtek.com

  Welcome and I would appreciate if you give some information about your situation.

• + 011 phone calls indicating that I have serious problems with my computer and that they provide a service of Microsoft solve problems

  original title: + 011 phone calls

  I just got a phone call from + 011 indicating that I have serious problems with my computer and they provide a Microsoft service problems. It sounds like a crowded call center and they can tell me their name and they tried to set up a remote entry on my computer. That's when I hung up. Is - this legitimate because what it really looked like a trick.

  Not legitimate... do not answer the call... Mike Hall MVP - Windows Expert: consumer http://msmvps.com/blogs/mikehall/

• Call before all with phone linksys not updated of CUCM online.

  Hello

  We have CUCM 9.1.2 and there is mixture of phones Cisco and linksys.

  When I come to call on the Cisco IP phone, number CFA is updated on line phone CUCM configuration.

  But when I do call before all on Linksys SPA942/SPA962 phones, number CFA is not enforced CUCM phone line configuration up-to-date.

  A feedback?

  Rgds

  Rajesh Kumar

  I can't find documentation to prove this, but I believe that it will not work as you wish. The mechanism that the use of phones IP Cisco to communicate information to the CFA is an owner for the SIP extension, which is blocked on the third-party SIP devices. In other words, RFC3261 does not provide a mechanism to do this. Most likely, the way in which the phone deals with CFA is issuing a REFER message when it receives the INVITATION of CUCM. The easiest way is to be sure of all just take a capture of the two packages the user to CFA and an incoming call while it is on. If she actually uses SEE, you must set the component search space the rerouting on the device in CUCM in a CSS which includes some CFA should be allowed to reach destinations.

  Please remember useful frequency responses and identify useful or correct answers.

• I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

  I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

  

  In addition, the Console has opened with the same message several times, but I don't know what that means.

  Any help would be appreciated.

  Hello

  The last is a picture of the Terminal window.

  Just because it lists 'Console' does not mean that it has nothing to do with this application.

  You have not said why or what you're trying to install so I can't help with that.

  You can use the activity monitor to leave their.

  After you select an item, use the X in a type of stop sign icon and confirm force quit.

  

  21:36 Thursday; September 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Satellite Pro C650D - problems with the audio and game controllers

  Hello

  I recently had problems with my microphone and speakers/headphones and game controllers.
  Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Stakeholders sometimes still work when I connect headset.
  Some of the sounds are still coming through the speakers while some coming through the headphones.

  I have a usb game controller which also did not work everything properly.
  If I assign buttons in the program that they do not work in the game.

  All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

  Any body have similar problems or know what to do better?

  See you soon
  Laurin

  Hello

  Can you please send some details on the laptop model and the system you are using?

  With regard to the issue of sound/mic:
  > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Are you talking about internal microphone or external? This only happens using Skype?
  In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

  > Yet sometimes the speakers work when I connect headset.
  I recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295

  The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
  She wrote:
  + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
  + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

  + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

  Regarding the game controller:
  > I have a usb game controller which also did not work everything properly.
  > If I attribute buttons in the program, they do not work in the game.
  I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

• HP 15 laptop: problem with the touchpad and the key "stuck."

  Hello!
   
  Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
   
  First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
   
  Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
   
  Thank you in advance for your help!

  Welcome to the HP support community @gouch3.

  I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

  Have you tried to use a keyboard external and mouse at all?

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried to perform a material or forced reset Reset?

  Did you do a test of material?

  Have you updated your drivers?

  gouch3 wrote:

  ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

  It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

  I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  Touchpad:

  • Type of research, "Device Manager."
  • Click on Device Manager,
  • Expand mice and other pointing devices.
  • Right click on the TouchPad,
  • Click on uninstall.
  • Restart the computer laptop twice,
  • Reinstall the TouchPad card.

  I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

  This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Thank you!

• Strange problems with the database

  Hello

  I just got my Fuze and am very happy with it; However, I am having a very strange problem with the database. I have a 16 GB sdhc card that I use with the "rocket" and there are about 4 songs on the card that will not play and have no information charge tag. Their tags appear in the tag browser (not the in the track information screen) as just an empty rectangle. Under the track information screen, sizes are listed as ~ 4000 mb. The songs will not play and I can not jump in front of one of these songs once they were loaded.

  At first, I suspected some kind of corruption of tag, so I set out that night to track down the problem. I removed the 16 GB card and reset the player. Then, I loaded one of the corrupt in the internal memory of the player. The track has been scanned and played correctly. Then, I removed the track of the internal memory and it loaded on another SDHC card. Yet once, everything worked correctly, so I knew that the card I was using was a kind of system files or physical problem. I returned the original 16 GB sdhc card in the reader and checked that the file was still unplayable, and then I plugged the "rocket" to my computer. I transferred the unplayable file on my computer and compared (with md5sum) to the original file, thinking that if there was the file system or physical corruption the copy of the map would be damaged. However, the files were equivalent.

  To make things even more interesting, I also have problems with the registration of the kind. I have some files tagged Genres such as 'Classic' and 'Rock '. In the list of the genre, I see this:

  C

  CL

  CLA

  CLAS

  Class

  Classic

  Classic

  Classica

  Classic

  Rock

  So, there is corruption on the kind of 'Classic' but not the kind of "Rock". Each of the substrings of 'Classic' contains only a few titles, with most of the other titles listed where they should be. I checked that the tracks are labeled correctly and in exactly the same way as the other tracks that do not have this problem.

  I am at a total loss about what to do, and I'd really appreciate any advice or suggestions. I use the current firmware, 2.03.31a and the songs in question are in Ogg Vorbis format.

  MM

  Thanks for your replies.

  I managed to find what may be the problem. Tracks that received corrupt tags had the names of total path with more than 256 characters. It seems that the driver internal fat32 the rocket uses vomits all over the place when the path name is too long. Before the "rocket", I got an iPod running rockbox tags with the same directory structure that I have on the "rocket", so I don't think that this restriction on the length of the path name is a limitation or requirement of the fat32 file system. Reduce the path corrected the problem with the files being unreadable.

  However, the problem with foires genres the rest. Looking at the files show that corruption, they all have a little information in tags. Most of the information is contained in the hashes I have files that identify them via musicbrainz. The limit on the total number of characters in the tags of the track includes the "rocket" label is not read or use?

  MM

• Strange problem with ASDM

  Hi, today we had a strange problem with one of our 5550. I worked through ASDM on it and all of a sudden I couldn't connect via asdm on the interface of management or inside interface. Nothing helps.

  When I connected with a vpn, then use asdm, it works. My ip on the network when it did not work was 1xx.xxx.81.235. When I use the vpn is a 1xx.xxx.55.1 from a different ip address. I can build a connection on the inside interface with asdm (with vpn).

  I tried closed and without stop the interface of man, that does not.

  It may be that the things asa, I am an intruder and dynamically blocks my netwerk range? If yes where can I find this info.

  Other users of our team had the same problem.

  I also checked the syslog nothing.

  THX,

  Marc

  Although I've ever experienced this myself, but if the running-config has not changed and worked before its possible that the ASA

  may have shunned your connection?

  To the CLI:

  # sh shun

  look if your IP address is present, if any make:

  # claire shun

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/protect.html#wp1058270

  More than likely it is do to a change to the running configuration, I would start by looking at a previously working with the gift of running-config running-config.

• strange behavior with access Internet and e-mail through D6300 AC1600

  NOTE: When creating this post 'Model' box doesn't let me choose my modem model, it was not an option so I picked one at random! My current modem is the AC1600.

  I hope someone can help with this problem.

  Modem works fine, Internet access is very good.

  My my email on new servers migrated hosting service yesterday now I have strange problems with access to electronic mail.

  I can access e-mail very well on my phone via 4G.

  Unable to access from any device on my network, e-mail, webmail or outlook or messaging.

  If my phone is on the network, it cannot access email either.

  I can ping the e-mail servers and my domain OK from any device

  DNS resolves the addresses OK

  As several devices on the network have difficulty then it is network and/or router associated

  I think a factory reset on the modem as a last resort.

  It's only a problem for e-mail server migration.

  Outlook is saying: the connection to the server has been lost

  Outlook cannot configure the IMAP account automatically.

  When I try manually it says that the server does not support the encryption type (the one provided by the service of the host).

  My companion said that it works OK on hisnetwork.

  Ahhhh, would you believe? After a factory reset of the router and troublehshooting hours I managed to contact my hosting service (I usually go through the dealer) and they said that my IP address has been blocked due to many failed attempts to connect to my CPanel! I had encountered a problem with the password CPanel and who had put on the side so I fixed the problem of e-mail! Heck, who would have guessed that they were related?

  Thanks for your help!

• strange problem with Ericsson H5321

  Hello

  I have a strange problem with Ericsson H5321 on my X 230. Until a few weeks ago, the card worked perfectly as a modem (at least on Linux, so I guess it would be too much work in Windows). Unfortunately, a few weeks ago disappeared from the network manager modem connection. I checked that all the special device for this files still exist:

  $ because I in/sys/class / * / * {ACM, wdm} * / device/interface; echo-n "${i}: ';" $ Cat {i}; fact
  
  / sys/Class/TTY/ttyACM0/Device/Interface: H5321 gw Broadband Mobile Modem
  
  / sys/Class/TTY/ttyACM1/Device/Interface: H5321 gw Mobile broadband data Modem
  
  / sys/Class/TTY/ttyACM2/Device/Interface: H5321 gw Mobile Broadband GPS Port
  
  / sys/Class/usbmisc/CDC-wdm1/Device/Interface: H5321 gw management of mobile devices to wide band
  
  / sys/Class/usbmisc/CDC-wdm2/Device/Interface: H5321 gw Mobile Broadband USIM Port
  $ lsusb | grep Ericsson
  
  

  .. .and I also checked it works like GPS (at least kind of: it generates data on/dev/ttyACM2 NMEA streams, but cannot get a GPS fix even after 45 minutes with access to an open sky).

  Then I tried to run windows 7 and the card is visible in the "Device Manager", but there is also no possibility to create the GSM connection in the connection menu in the bottom right.

  I tried a new install of Windows 7, I tried to reset the BIOS (even with the removal of the battery backup), but still I can't force them to work again. My BIOS is fully upgraded BTW: the problem appeared during the use of 2.61 and I also tried with recently published 2.62.

  My cell phone is always on the extended warranty, but as modem bought in line with the basic configuration it was only covered by the warranty of 12 months has expired

  Today it came to my mind that, as the modem itself seems a little work (present, responsive GPS device) then maybe it's a SIM card reader that is actually damaged (which would explain a bit why the camera itself is present, but I can't create a connection). Can someone confirm or deny my theory? If it is valid, then I could still replace SIM card reader because it is part of the basic configuration.

  Thanks a lot for your suggestions!

  [Mystery solved: I managed to put the SIM card on a wrong side...;]
  [I hate myself so muuuuch;]
  ([btw: Lenovo could fix their SIM card reader, so there is only one possible way to put a SIM card using his corner of heart: it would have saved me 2 days of stress and an investigation;]) )

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments