Strange problem with my Satellite A200

Hello

I have a problem with my Satellite A200-1DY.

In the last two days, this occurs twice. When I start the laptop there are three icons, systray, speaker, battery and network icon, and then, the laptop stops and does not work. I can't use the mouse or keyboard and the cooler fan does not work.

When I put my hand the area where it is the processor it is hot enough. I can't reset the laptop. At first I have to disconnect from the mains. After that I restart the laptop. The cooler fan starts very quickly and it removes a lot of heat from the CPU area.

What can I do?
Sorry for my horrible English and marry Christmas.

Hello

At first, I must say that your English is very good and understandable. Now after this compliment go back to the problem described. ;)

I have too many Satellite A200 and I installed Vista and Windows XP Home edition, several times and never noticed a similar problem. I must say that all my tests were with the own operating system preinstalled.

In your case, it is not easy to say why this happens, but it turns out that some process must be loaded and at this stage of the computer cell blocks. Usually, if you keep the Start button / stop for 5 seconds, book it should be OFF.

You must understand that no one knows we what's your personal operating system configuration and if there are some applications you have installed the last days. Exact an application that runs in the background may not be loaded properly and blocks for laptop.

What should do? You can enter MSCONFIG and check all entries of Systemstart. Try to disable all the stuff, you don't need and try it again. Maybe you will be lucky and find out if there is something that starting cell blocks.

Sorry, but it's really not possible to say why this happen. If you want you can try to roll back the OS to an earlier time until it starts in the hope that the BONE will be work as before.

Bye and good luck!

Tags: Toshiba

Similar Questions

  • Several problems with my Satellite A200-1QZ

    Hello

    I'm sorry to open a new thread, but I already looked around for awhile and has failed to find the answers I need.

    Since I have several different problems, some of which are probably unique, I thought I might as well start a new thread.

    So lets start with the less important bits and get more important issues to light:

    1)

    I have some problems with my FN keys. While it seems that I can use some of them (FN + ESC, F1, F3, F6, F7, F10, F11, F12) there are also some that I can't use FN + F2, F4, F5, F8, F9, basically.

    How is it that some work and some do not, and what I need to do to get them all to work again?

    2)

    There are times, when the my screen goes black suddenly while I work, play or surf.
    This does not appear to be linked to specific programs or something, it happens completely at random.
    Sometimes it doesn't happen for weeks, sometimes, it happens two times a day.

    Normally this does not really pose problems, since all I had to do was turn the idle mode (power-led flashes orange), log in again and everything worked fine.
    But unfortunately 3 problem, so it no longer works.

    3)

    When I click on the power button - or even chose standby mode via the menu stop - the laptop won't "idle" mode, but the screen goes all black.
    As soon as I move the mouse or do something else, I wonder you connect again, so instead of the idle mode the laptop seems to go in sleeping mode.

    The main problem is that this sleep mode is not sufficient to treat the problem 2, so ultimately, my screen goes black and all I can do is to close completely by holding the button power for 5 seconds.

    Sorry for my English is not my mother tongue. Thanks for all the help in advance.

    Greetings

    Hello and welcome to this forum of technical support.

    I'm not an expert but will try to help you.

    # I put t know what operating system you use, but try to please install or reinstall Toshiba Value added Package.
    # Huh... never heard of something like this and this in standby mode is the solution to this. It means books works as usual but the display is suddenly black?
    # It is not easy to say what the problem is here. You can use Hibernate mode properly?

    By the way: are all hardware components installed correctly (Device Manager)?

  • Strange problem with keyboard Satellite A50 542

    I had due to problems with my laptop from the time of the purchase in October 2004

    The cursor moves on its own to another location
    The "BOLD" mode appears from time to time on its own
    The computer will go to another application on its own for example while typing an e-mail message, the computer will switch to the mailbox

    Hello

    Well. Have you tried to restore the system?
    Please recover the operating system with the restore CD provided. If this problem persists, I suppose that it s a hardware malfunction. In this case, you must contact the service partner to change keyboard.

    Best regards

  • Problem with the Satellite A200 and Windows Vista startup

    Yesterday, my laptop had some mistakes and tried to stop.
    He remained on the screen closed for quite a long time, so I decided to push the power button until it turns off.

    When I went to turn it back to the a started going through the normal screens, the Toshiba screen and then the white screen with the Microsoft flag down. At this point, the screen goes completely black and rest that way.

    Through starting initial power cord, light is turned on, the power supply is on the HARD drive light and then when the screen turns white HARD drive light turns off and stays off.

    I tried to do a system repair using the F8 key at startup and it goes into the Advanced Boot Options menu when I select 'Repair your computer', the light of the HARD drive temporarily, I go through the screens and select System Restore, I selected a date a few weeks and then click Next on the screen indicating the (c :)) system disk is ready to be restored then it returns an error -" (c) drive has errors. Windows has detected corruption in the file (c) system.

    You should check the drive for errors before you can restore it "- and at this point, I can only click on the 'check' the drive to find errors, and then click Start, as he chose the option 'Automatically fix file system errors'."

    When I click Start nothing seems to happen just on the same screen, the HARD drive light does not come on at all and there is no internal HARD drive noise. The only way I can get out of this screen is to turn the computer off again.

    If someone is able to help I would really appreciate it!

    Thank you!

    Hi Cazza68,

    Looks like Windows is confused upward

    Can you start Windows if you perform an installation of Toshiba Recovery disk recovery?

  • Strange problem with on Satellite 2805-S201 DVD player

    Hello! I have trouble with DVD player in my Toshiba 2805-S201.

    Seller told me, that this laptop can play DVD and Audio CD without loading the OS. And under installed LID switch 'disc' <-->'digital '.

    When I pass him on the disk, computer laptop turns on, wait 3-4 sec and switches off the power.

    Help me please. Write to [email protected] or answer here. Pleeeze! ,-)

    Hello

    On this device, it is not possible to watch DVD without an operating system just below the operating system currently running. Please check s operating manuals and collect the right information.

    Just newer units have a separate drive that allows this.

  • Strange problem with my Satellite A505-S6973

    Somehow when I put a CD in my player... He slip in my computer, but not in the drive and I can not find.

    The drive works fine, closes, opens well, load other CDs fine. I tried to watch with a flashlight can not find the disk...

    So I don't know what my options are here, leave it there and hope, nothing happens try to remove my disk drive, which I have no idea how to do.
    Or send it, which im not sure if he would be paid under warranty...

    Anyway advice or ideas would be great.

    > Somehow when I put a CD in my player... He slip in my computer, but not in the drive and I can not find.

    You mean the disc is located inside the laptop and you can't find or remove it?
    I don't know how you managed to do something like that, but I think you need a help of a technician for laptop that I highly recommend contact the ASP in your country for assistance.

  • Strange problem with my satellite notebook

    For some reason today on turning on my laptop starts ok, but it won t open certain programs. No internet connection, can t open documents, it won t start internet explore and won t open system restore, simply me blank pages which I am then unable to close.

    Unfortunately I n t have a system restore disk.
    Help, please!

    You can start your laptop in SafeMode (F8)?

  • I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

    I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

    In addition, the Console has opened with the same message several times, but I don't know what that means.

    Any help would be appreciated.

    Hello

    The last is a picture of the Terminal window.

    Just because it lists 'Console' does not mean that it has nothing to do with this application.

    You have not said why or what you're trying to install so I can't help with that.

    You can use the activity monitor to leave their.

    After you select an item, use the X in a type of stop sign icon and confirm force quit.

    21:36 Thursday; September 15, 2016

     iMac 2.5 Ghz i5 2011 (El Capitan)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro (Snow Leopard 10.6.8) 2 GB
     Mac OS X (10.6.8).
     iPhone and iPad (2)

  • Problems with disk Satellite pro 4200 hard assembly

    I have problems with a Satellite pro 4200.
    The Notbook reads no more disks. Undercarriage I traded the loan, but did not work. Undercarriage is addressed, but it is read the discs is not possible or formatted. Also, an update of the Bios is not possible, as undercarriage reads no more disks.

    CU
    Eltgen

    Hi Eltgen

    Sorry, but it is not easy to tell what the problem is on that path. If I understand you well you have built in a new floppy drive, because the old one was faulty. Am I wrong?

    It will be interesting to know is the new part already used. Perhaps is the new one also defective. I hope that a little light is on if you put the disc inside.

  • Problem with my Satellite C650D - 10 d of charge

    I have some problems with my Satellite C650D - 10 d and its battery.

    Indeed, when I want to reload my computer, it will no more, charge his battery to 99%, then it says "Blocked, not supported" and the corresponding light is off instead of orange or yellow-green.

    Then, after using my computer on battery, if I want to load, plug is not enough, I must remove my battery and replace. Charges of battery, 99%, once again.

    The problem is recurring and I don't know what to do anymore. I tried to get an empty using the BIOS battery (because Windows 7 turns off the computer when the battery is at least 5%), to see if there was a problem of calibration of the battery, but this isn't the case, and my problem is still the same.

    Hope you can help me ;)

    I recommend the update to the BIOS.

    Not sure if the solution in your case, but I read in some discussions that the BIOS update could solve battery problems.

    Otherwise if the BIOS does not help, then you should check if the new battery could be the solution.

  • strange problem with Ericsson H5321

    Hello

    I have a strange problem with Ericsson H5321 on my X 230. Until a few weeks ago, the card worked perfectly as a modem (at least on Linux, so I guess it would be too much work in Windows). Unfortunately, a few weeks ago disappeared from the network manager modem connection. I checked that all the special device for this files still exist:

    $ because I in/sys/class / * / * {ACM, wdm} * / device/interface; echo-n "${i}: ';" $ Cat {i}; fact
    / sys/Class/TTY/ttyACM0/Device/Interface: H5321 gw Broadband Mobile Modem
    / sys/Class/TTY/ttyACM1/Device/Interface: H5321 gw Mobile broadband data Modem
    / sys/Class/TTY/ttyACM2/Device/Interface: H5321 gw Mobile Broadband GPS Port
    / sys/Class/usbmisc/CDC-wdm1/Device/Interface: H5321 gw management of mobile devices to wide band
    / sys/Class/usbmisc/CDC-wdm2/Device/Interface: H5321 gw Mobile Broadband USIM Port
    $ lsusb | grep Ericsson

    .. .and I also checked it works like GPS (at least kind of: it generates data on/dev/ttyACM2 NMEA streams, but cannot get a GPS fix even after 45 minutes with access to an open sky).

    Then I tried to run windows 7 and the card is visible in the "Device Manager", but there is also no possibility to create the GSM connection in the connection menu in the bottom right.

    I tried a new install of Windows 7, I tried to reset the BIOS (even with the removal of the battery backup), but still I can't force them to work again. My BIOS is fully upgraded BTW: the problem appeared during the use of 2.61 and I also tried with recently published 2.62.

    My cell phone is always on the extended warranty, but as modem bought in line with the basic configuration it was only covered by the warranty of 12 months has expired

    Today it came to my mind that, as the modem itself seems a little work (present, responsive GPS device) then maybe it's a SIM card reader that is actually damaged (which would explain a bit why the camera itself is present, but I can't create a connection). Can someone confirm or deny my theory? If it is valid, then I could still replace SIM card reader because it is part of the basic configuration.

    Thanks a lot for your suggestions!

    [Mystery solved: I managed to put the SIM card on a wrong side...;]
    [I hate myself so muuuuch;]
    ([btw: Lenovo could fix their SIM card reader, so there is only one possible way to put a SIM card using his corner of heart: it would have saved me 2 days of stress and an investigation;]) )

  • Strange problem with HP OfficeJet 6500 709n

    I have a very strange problem with my printer HP 6500 E709n wireless network.  I have recently upgraded to Windows 8 and everything worked well.  Then, all of a sudden I wasn't able to scan more.  The HP Solution Center says that the printer is disconnected.

    The weird part is that it appears in the section of Control Panel as active and properly connected printer and devices and I can still print to it, but not scan to it. He also says in the network section of the HP solutions center that the printer is connected and ready.  The printer is connected to my wireless network and I also use it with a Mac Mini.  The Mac can print and scan to it.

    No idea why this is happening and how to fix it?  Thank you.

    This problem of not being able to scan only started after upgrade to Windows 8?

    If so, then to solve the problem, you must first uninstall the Windows 7 software and then reinstall the software of Windows 8 long.

    To uninstall the software, follow these steps:

    1 right-click or press on and hold the lower left corner of the screen, then click or type programs and features. A list of installed programs.
    2. click or tap the name of your HP printer, and then click or tap on uninstall.
    3. follow the on-screen instructions to uninstall the software.

    After you have uninstalled it, go ahead and download the full software features for your printer. It can be found on the link below.

    Driver and HP Officejet Full Feature software

    Install this version of the software and try to scan now!

    Let me know if it works for you, good luck!

    -Kyle

  • Strange problems with the database

    Hello

    I just got my Fuze and am very happy with it; However, I am having a very strange problem with the database. I have a 16 GB sdhc card that I use with the "rocket" and there are about 4 songs on the card that will not play and have no information charge tag. Their tags appear in the tag browser (not the in the track information screen) as just an empty rectangle. Under the track information screen, sizes are listed as ~ 4000 mb. The songs will not play and I can not jump in front of one of these songs once they were loaded.

    At first, I suspected some kind of corruption of tag, so I set out that night to track down the problem. I removed the 16 GB card and reset the player. Then, I loaded one of the corrupt in the internal memory of the player. The track has been scanned and played correctly. Then, I removed the track of the internal memory and it loaded on another SDHC card. Yet once, everything worked correctly, so I knew that the card I was using was a kind of system files or physical problem. I returned the original 16 GB sdhc card in the reader and checked that the file was still unplayable, and then I plugged the "rocket" to my computer. I transferred the unplayable file on my computer and compared (with md5sum) to the original file, thinking that if there was the file system or physical corruption the copy of the map would be damaged. However, the files were equivalent.

    To make things even more interesting, I also have problems with the registration of the kind. I have some files tagged Genres such as 'Classic' and 'Rock '. In the list of the genre, I see this:

    C

    CL

    CLA

    CLAS

    Class

    Classic

    Classic

    Classica

    Classic

    Rock

    So, there is corruption on the kind of 'Classic' but not the kind of "Rock". Each of the substrings of 'Classic' contains only a few titles, with most of the other titles listed where they should be. I checked that the tracks are labeled correctly and in exactly the same way as the other tracks that do not have this problem.

    I am at a total loss about what to do, and I'd really appreciate any advice or suggestions. I use the current firmware, 2.03.31a and the songs in question are in Ogg Vorbis format.

    MM

    Thanks for your replies.

    I managed to find what may be the problem. Tracks that received corrupt tags had the names of total path with more than 256 characters. It seems that the driver internal fat32 the rocket uses vomits all over the place when the path name is too long. Before the "rocket", I got an iPod running rockbox tags with the same directory structure that I have on the "rocket", so I don't think that this restriction on the length of the path name is a limitation or requirement of the fat32 file system. Reduce the path corrected the problem with the files being unreadable.

    However, the problem with foires genres the rest. Looking at the files show that corruption, they all have a little information in tags. Most of the information is contained in the hashes I have files that identify them via musicbrainz. The limit on the total number of characters in the tags of the track includes the "rocket" label is not read or use?

    MM

  • Strange problem with BT Headset!

    Hello

    I have a very strange problem with BT headset.  My Z3 is model of official unlocked Docomo of SO - 01 G.  I got PlayStation Voxtube 500 BT headset BT version is THE 4.0.  This headset has been used with Nexus 5 (Android 5.1.1) without any problem and the battery last almost a week to stanby with a few minute talk time per day.  However, after not getting Z3 with Android 4.4.4, pairing with Voxtube has no problem.  Then, the battery is discharged within 4-5 hours stanby.  I tested it for 3 or 4 times, it has come down to that there must be something worng with the battery of the headset.

    So, I got with PlayStation representative claim (it is only a few months old).  Surprisingly, representative of PlayStation has all the test suggested no stanby time problem with their phones iPhone 5 or Sumsung Galaxy S5.  Then I took back recharged so its performance is very short wait duration the same as before.  So, I tested it with my iPad Mini 3 and performance return to normal standby time.

    So, it can be concluded for only problem is with the Z3. But once again with the mating with the other headset BT Jabra Tag2, stanby time is within the normal range (4-5 days).  When that happens?  I am very confused. Should I give up on PlayStation?

    Thank you for your time,

    Simply upgrade to 5.0.2 lolipop and hope this will help me on this issue.

  • Strange problem with HorizontalFieldManager - it does not show on real device bitmap

    I have a rather strange problem with the HorizontalFieldManager on my Blackberry 8820, which I did not on the Simulator, or done other blackberries that I tried to install my game.

    The problem is that bitmaps that I add, do not appear on the actual device, as in the images below. The code is provided below as well. No idea how to debug, or resolve is appreciated.

    Here's what I see on Simulator and some devices

    Here's what I see on the real blackberry:

    Code:

    ......

    OK, I found the solution - the problem is that there seems to be a bug where you can't put more fields button radio on a horizontal layout manager with 4.2.2.x.

    The solution is to extend the RadioButtonField field and replace the positioning method:

    RadioButtonField radioField = new RadioButtonHack ("", textureGroup, isSelected);

    SerializableAttribute public class RadioButtonHack extends RadioButtonField {}

    public RadioButtonHack() {}
    Super();
    }

    public RadioButtonHack (String label, group RadioButtonGroup,
    Boolean selected, long style) {}
    Super (label, group, selected, style);
    }

    public RadioButtonHack (String label, group RadioButtonGroup,
    Boolean selected) {}
    Super (label, selected group);
    }

    public RadioButtonHack (label As String) {}
    Super (label);
    }

    Protected Sub layout (int width, int height) {}
    int temp = this.getPreferredWidth ();
    setExtent (time, height);
    Super.Layout (time, height);
    }

    }

    resolved http://supportforums.blackberry.com/t5/Java-Development/radiobuttonGroup-related-problem-in-storm/m-...

Maybe you are looking for

  • I have an unread email in my Inbox that was not found

    My "Inbox" shows (in bold) an unread E-mail downloaded from my server Bellhosting. However no such email unread is to be found in my entire inbox. Direct querying the server Bellhosting shows unread e-mail. This is a mistake on the part of Thunderbir

  • How to convert a table to graph XY?

    Hello I'm new to LabVIEW. For my course, I have to create a graph of load on a beam against the measured voltage to a rosette strain gage. I managed to create the required table and I can export to Microsoft Excel to create the chart, and that works

  • SSD update for HP nx9420

    I am very satisfied of my computer laptop htough even there a few years. I would like either to increase the capacity of the HARD disk, real is only 40 GB or replace it with a SSD HARD drive kind. Can you help me with suggestions for both options? Al

  • 1025 CP: CP 1025 light flashes when turned on

    Hello CP1025... when I turn on the printer flashes a few minutes warning, and then the light and the ready light Tower and remain stable (without flashing). Printer does not work. I tried the hard reset (disconnect the power cable and wait for a whil

  • How can I get Caesar IV to work on Windows 7 Home Premium 64 bit?

    My father has installed and tried running Caesar IV on our WIndows 7 Home Premium 64-bit system. He could not come, so I offered to help. Not knowing what he had or had not done, I decided to uninstall and reinstall Caesar. I tried to install the ver