Strange problem with order of cursor on Satellite P100-160

Similar Questions

• Strange problem with its virtual on my Satellite A100

  I have a problem with Virtual Sound on my Satellite A100-638 with Windows XP. If VS is turned on and Windows plays a sound of Windows, as when an error appears, the volume increases.

  When the VS is off, the problem does not exist, but I would have turned on VS, cause, I play a lot of music! I tried to upgrade level or upgrade to other versions of VS, but the problem is still there. I also tried to uninstall and install my sound card drivers.

  Can someone help me with this?

  Hello

  I put t know what is the problem. Your description is incomplete and very strange.
  Usually it's not easy to say what's wrong because you have already installed the 3rd party applications that could only unique functions or have a bad influence on all operating systems.
  I assume that the registry is damaged.

  If we can continue the speculation after the recovery completely portable.

• More strange problem with keyboard and mouse on Satellite 1900

  Clicking on files or folders, I wonder to confirm the deletion of the clicked elements. The "Left shift" is interpreted as a backspace. I was afraid of a virus; but no viruses or spyware are present. I reformatted and reinstalled evrything; the problem persists. Everyone has known and resolved this strange problem.
  Thank you for the help.

  Hello

  It's very strange. Unfortunately I have no precise explanation. I suggest you check this with external keyboard to see if the keyboard is not defective.

• Strange problem with the module memory series Satellite Pro 4300

  I have a laptop Toshiba satellite pro 4300 series with 64 MB onboard + 64 MB Module and I want to upgrade my memory to 320 MB. I bought two ram of 128 MB each. I removed the 64 MB module and I put a 128 MB module into the slot (A) one, but I saw that the total memory is 128 MB again.

  I removed the module again and I put the second module in the connector (A), but I saw that the total memory is 128 MB again. After that, I put the two modules in my notebook (Slot A and slot B) but I see that the total memory is 192 MB. This means that it recognizes each module as 64 MB as opposed to 128 MB. Dose anyone know why this happens?
  And what do I do about it?

  Thank you.
  [email protected]

  Hello

  Well, I put t know why this happens. It seems that the 128 MB modules are 64 MB modules. I know that it of strange but I have only this explanation. You are 100% sure that both modules of memory 128 MB?
  In my opinion, you should check the bars of memory if they have 128 MB.

  Good bye

• Strange problem with password created on my Satellite L20

  I bought a Toshiba Satellite L20 laptop with model No. PSL2XL-01R007
  I registered the password using the Toshiba help utility that has been placed on the desktop, using the secure user function.

  After stop of the laptop and turned on, it prompted me to enter the password before it can start. When I entered the password which I thought I had entered windows using the Toshiba help utility under secure user, it gives me a message of invalid password whenever I try to enter the password. So I can't use my laptop. The BIOS is the Phoenix.

  Thanks for your advice and assistance

  Hi Hung

  I tested it today with my Satellite L20-182 and everything works fine. I tested the options for the user and supervisor passwords, and there is no problem at all.

  Sorry, but I think that you enter the wrong word as password and this is the reason why you cannot start the laptop. I really put t see any other explanation.

• Strange problem with ports USB on my Satellite A300-243

  Hello

  I have the following problem. So far, I have 4 USB ports, and only my USB key and key to my friend works there. All other USB keys (I tried mby 20 different ones) does not work: aks for, pilot research, etc...

  I spent many hours together in the internet search, but I didn t find a USB driver, but I don't even know what I'm looking for. So please, I would be very happy if someone could help me with this.
  And I forgot: other devices do not work too. I use it y of the mouse, but it only works in the USB port on the left. Safely, he asks for driver...

  Thanks in advance.

  Hello

  Normally you n t need a driver for USB. On XP, Vista and Windows 7 the stick will be automatically installed and no driver is no longer necessary.

  Can you please tell us what OS you are using? This happens with the factory settings or you have installed another OS?
  You should try with the factory settings and update the chipset driver. You can find it on the Toshiba site. In addition, updating the BIOS could also be helpful.

• Strange problem with light touches on the Satellite A350-10z

  Hello

  I have a Toshiba A350-10z with windows 7 x 64. When I got a Vista everything was all straight light keys working properly.
  Now the keys have different functions - the key to 'silence' runs my player for example. And there is another problem - my 'FN' key does not work.

  When I use TI - OS shows an error and ask me to close the application. I can run these shortcuts by the mouse. Is there a driver for this?
  I can't found on the download site.

  Please install the package of added value for your laptop model.

  If you already have it out of the system, and after restarting the laptop install it again.

• Strange problem with Power Saver on my Satellite M30

  My laptop connected via the mains supply, is quite well. However, when it is not connected (i.e. use it on battery), it shows 100% battery up to 90%, when I get an error window Windows "Toshiba Power Saver must be closed, you want to send an etc error report" and then my battery on the taskbar becomes critical - 3%.

  In addition, at this stage, my processor speed slows down (which is notable because applications take longer to load etc.) as if the laptop is happening in energy saving mode. I thought that maybe this is a display error, so I left the laptop on just to see - and turns off 5 minutes later!

  What is a software error or a bad battery? Any help appreciated.

  Best regards.

  Hi John,.

  I think you may have a bad battery, but just to be safe, I would recommend that you recharge the Toshiba power management software, and then check the default settings for the actions to be taken with display brightness, speed of the processor, hard drive, etc. at the various stages of the battery capacity.

  It is normal that the brightness of the screen to reduce in stages, as the battery capacity decreases, and it is also normal that the speed of the CPU to slow down as well. You can change this behavior if you want to leave in the Toshiba power management utility.

  Kind regards

• I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

  I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

  

  In addition, the Console has opened with the same message several times, but I don't know what that means.

  Any help would be appreciated.

  Hello

  The last is a picture of the Terminal window.

  Just because it lists 'Console' does not mean that it has nothing to do with this application.

  You have not said why or what you're trying to install so I can't help with that.

  You can use the activity monitor to leave their.

  After you select an item, use the X in a type of stop sign icon and confirm force quit.

  

  21:36 Thursday; September 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• strange problem with Ericsson H5321

  Hello

  I have a strange problem with Ericsson H5321 on my X 230. Until a few weeks ago, the card worked perfectly as a modem (at least on Linux, so I guess it would be too much work in Windows). Unfortunately, a few weeks ago disappeared from the network manager modem connection. I checked that all the special device for this files still exist:

  $ because I in/sys/class / * / * {ACM, wdm} * / device/interface; echo-n "${i}: ';" $ Cat {i}; fact
  
  / sys/Class/TTY/ttyACM0/Device/Interface: H5321 gw Broadband Mobile Modem
  
  / sys/Class/TTY/ttyACM1/Device/Interface: H5321 gw Mobile broadband data Modem
  
  / sys/Class/TTY/ttyACM2/Device/Interface: H5321 gw Mobile Broadband GPS Port
  
  / sys/Class/usbmisc/CDC-wdm1/Device/Interface: H5321 gw management of mobile devices to wide band
  
  / sys/Class/usbmisc/CDC-wdm2/Device/Interface: H5321 gw Mobile Broadband USIM Port
  $ lsusb | grep Ericsson
  
  

  .. .and I also checked it works like GPS (at least kind of: it generates data on/dev/ttyACM2 NMEA streams, but cannot get a GPS fix even after 45 minutes with access to an open sky).

  Then I tried to run windows 7 and the card is visible in the "Device Manager", but there is also no possibility to create the GSM connection in the connection menu in the bottom right.

  I tried a new install of Windows 7, I tried to reset the BIOS (even with the removal of the battery backup), but still I can't force them to work again. My BIOS is fully upgraded BTW: the problem appeared during the use of 2.61 and I also tried with recently published 2.62.

  My cell phone is always on the extended warranty, but as modem bought in line with the basic configuration it was only covered by the warranty of 12 months has expired

  Today it came to my mind that, as the modem itself seems a little work (present, responsive GPS device) then maybe it's a SIM card reader that is actually damaged (which would explain a bit why the camera itself is present, but I can't create a connection). Can someone confirm or deny my theory? If it is valid, then I could still replace SIM card reader because it is part of the basic configuration.

  Thanks a lot for your suggestions!

  [Mystery solved: I managed to put the SIM card on a wrong side...;]
  [I hate myself so muuuuch;]
  ([btw: Lenovo could fix their SIM card reader, so there is only one possible way to put a SIM card using his corner of heart: it would have saved me 2 days of stress and an investigation;]) )

• Strange problem with HP OfficeJet 6500 709n

  I have a very strange problem with my printer HP 6500 E709n wireless network.  I have recently upgraded to Windows 8 and everything worked well.  Then, all of a sudden I wasn't able to scan more.  The HP Solution Center says that the printer is disconnected.

  The weird part is that it appears in the section of Control Panel as active and properly connected printer and devices and I can still print to it, but not scan to it. He also says in the network section of the HP solutions center that the printer is connected and ready.  The printer is connected to my wireless network and I also use it with a Mac Mini.  The Mac can print and scan to it.

  No idea why this is happening and how to fix it?  Thank you.

  This problem of not being able to scan only started after upgrade to Windows 8?

  If so, then to solve the problem, you must first uninstall the Windows 7 software and then reinstall the software of Windows 8 long.

  To uninstall the software, follow these steps:

  1 right-click or press on and hold the lower left corner of the screen, then click or type programs and features. A list of installed programs.
  2. click or tap the name of your HP printer, and then click or tap on uninstall.
  3. follow the on-screen instructions to uninstall the software.

  After you have uninstalled it, go ahead and download the full software features for your printer. It can be found on the link below.

  Driver and HP Officejet Full Feature software

  Install this version of the software and try to scan now!

  Let me know if it works for you, good luck!

  -Kyle

• Strange problems with the database

  Hello

  I just got my Fuze and am very happy with it; However, I am having a very strange problem with the database. I have a 16 GB sdhc card that I use with the "rocket" and there are about 4 songs on the card that will not play and have no information charge tag. Their tags appear in the tag browser (not the in the track information screen) as just an empty rectangle. Under the track information screen, sizes are listed as ~ 4000 mb. The songs will not play and I can not jump in front of one of these songs once they were loaded.

  At first, I suspected some kind of corruption of tag, so I set out that night to track down the problem. I removed the 16 GB card and reset the player. Then, I loaded one of the corrupt in the internal memory of the player. The track has been scanned and played correctly. Then, I removed the track of the internal memory and it loaded on another SDHC card. Yet once, everything worked correctly, so I knew that the card I was using was a kind of system files or physical problem. I returned the original 16 GB sdhc card in the reader and checked that the file was still unplayable, and then I plugged the "rocket" to my computer. I transferred the unplayable file on my computer and compared (with md5sum) to the original file, thinking that if there was the file system or physical corruption the copy of the map would be damaged. However, the files were equivalent.

  To make things even more interesting, I also have problems with the registration of the kind. I have some files tagged Genres such as 'Classic' and 'Rock '. In the list of the genre, I see this:

  C

  CL

  CLA

  CLAS

  Class

  Classic

  Classic

  Classica

  Classic

  Rock

  So, there is corruption on the kind of 'Classic' but not the kind of "Rock". Each of the substrings of 'Classic' contains only a few titles, with most of the other titles listed where they should be. I checked that the tracks are labeled correctly and in exactly the same way as the other tracks that do not have this problem.

  I am at a total loss about what to do, and I'd really appreciate any advice or suggestions. I use the current firmware, 2.03.31a and the songs in question are in Ogg Vorbis format.

  MM

  Thanks for your replies.

  I managed to find what may be the problem. Tracks that received corrupt tags had the names of total path with more than 256 characters. It seems that the driver internal fat32 the rocket uses vomits all over the place when the path name is too long. Before the "rocket", I got an iPod running rockbox tags with the same directory structure that I have on the "rocket", so I don't think that this restriction on the length of the path name is a limitation or requirement of the fat32 file system. Reduce the path corrected the problem with the files being unreadable.

  However, the problem with foires genres the rest. Looking at the files show that corruption, they all have a little information in tags. Most of the information is contained in the hashes I have files that identify them via musicbrainz. The limit on the total number of characters in the tags of the track includes the "rocket" label is not read or use?

  MM

• Strange problem with BT Headset!

  Hello

  I have a very strange problem with BT headset.  My Z3 is model of official unlocked Docomo of SO - 01 G.  I got PlayStation Voxtube 500 BT headset BT version is THE 4.0.  This headset has been used with Nexus 5 (Android 5.1.1) without any problem and the battery last almost a week to stanby with a few minute talk time per day.  However, after not getting Z3 with Android 4.4.4, pairing with Voxtube has no problem.  Then, the battery is discharged within 4-5 hours stanby.  I tested it for 3 or 4 times, it has come down to that there must be something worng with the battery of the headset.

  So, I got with PlayStation representative claim (it is only a few months old).  Surprisingly, representative of PlayStation has all the test suggested no stanby time problem with their phones iPhone 5 or Sumsung Galaxy S5.  Then I took back recharged so its performance is very short wait duration the same as before.  So, I tested it with my iPad Mini 3 and performance return to normal standby time.

  So, it can be concluded for only problem is with the Z3. But once again with the mating with the other headset BT Jabra Tag2, stanby time is within the normal range (4-5 days).  When that happens?  I am very confused. Should I give up on PlayStation?

  Thank you for your time,

  Simply upgrade to 5.0.2 lolipop and hope this will help me on this issue.

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• Strange problem with HorizontalFieldManager - it does not show on real device bitmap

  I have a rather strange problem with the HorizontalFieldManager on my Blackberry 8820, which I did not on the Simulator, or done other blackberries that I tried to install my game.

  The problem is that bitmaps that I add, do not appear on the actual device, as in the images below. The code is provided below as well. No idea how to debug, or resolve is appreciated.

  Here's what I see on Simulator and some devices

  

  Here's what I see on the real blackberry:

  

  Code:

  ......

  OK, I found the solution - the problem is that there seems to be a bug where you can't put more fields button radio on a horizontal layout manager with 4.2.2.x.

  The solution is to extend the RadioButtonField field and replace the positioning method:

  RadioButtonField radioField = new RadioButtonHack ("", textureGroup, isSelected);

  SerializableAttribute public class RadioButtonHack extends RadioButtonField {}

  public RadioButtonHack() {}
  Super();
  }

  public RadioButtonHack (String label, group RadioButtonGroup,
  Boolean selected, long style) {}
  Super (label, group, selected, style);
  }

  public RadioButtonHack (String label, group RadioButtonGroup,
  Boolean selected) {}
  Super (label, selected group);
  }

  public RadioButtonHack (label As String) {}
  Super (label);
  }

  Protected Sub layout (int width, int height) {}
  int temp = this.getPreferredWidth ();
  setExtent (time, height);
  Super.Layout (time, height);
  }

  }

  resolved http://supportforums.blackberry.com/t5/Java-Development/radiobuttonGroup-related-problem-in-storm/m-...