Strange problem with rocket, it loads more after that I did a update

Similar Questions

• Problem with my laptop LG KP500 after that PC has agreed for the first time.

  my pc has accepted my lg kp500 mobile so that I could save the photos, but this time, when I insert the USB it won't accept more can help you please thank you

  original title: problem with my cell phone after accepted pc it first time

  If you connect the phone to your PC via USB cable and go...
  Start / my computer... is the phone recognized with a drive letter?

  If_Yes_you may be able to copy and paste the pictures from there to
  a folder on your hard drive.

• My Ipod doesn t work "more after that I tried to update.

  I tried to update my ipod with the latest update of the software then it just crashed. now there's just the connection to the screen of itunes, but when I connect to my computer, nothing. When I ran troubleshoot he continues saying my ipod, a disk is missing, but I have itunes and quicktime updated and intalled

  For problems with the iPod, iTunes and QuickTime, you must find an Apple forum site. Maybe you could try http://forums.ilounge.com/ or http://forums.macrumors.com/forumdisplay.php?f=113 or https://discussions.apple.com/community/ipod?view=overview.

• Why Firefox always tell me that it blocks Java Deployment Toolkit after that I did the update?

  On the page Web 'Mozilla - check your Plugins', I was told that the 'Java Deployment Toolkit' was vulnerable. So I did the update. But then, I got the same problem still. Why? And should I care?

  Please see the attached screenshot.

  The most funny thing is... I visited two sites that use Java, being Java.com, but I haven't seen the black banner of the blocking message.

  The Java Deployment Toolkit can be the most recent version, but Oracle has not yet fixed the vulnerabilities with this plugin; so Mozilla still there on the red list and point require the user to use "Request enable" to deactivate it. A 'soft-block' - can be used if needed, but needs user by implementing action.

  More specifically, do you have a program on your PC that is really needed as Deployment Toolkit?
  Or is your concern that simply that it is disabled after update of Java?

  Very few applications consumer even uses this Deployment Toolkit, aimed at people who develop Java applications or applications such as the various Oracle programs in the workplace.

  Back to before Oracle acquired Sun Java systems in 2010, this Deployment Toolkit has not been installed with the runtime environment Java for users. Java developers needed to install a separate developers Toolbox for this Plugin - had the SDK program.

• The update even keep appearing after that I did the update

  I have a notification of update, I did the update, but for some reason it keeps appearing.

  Hi KennethBenjamin,

  Update is offered several times?

  This problem occurs when one of the following conditions is true:

  (a) an error has occurred during installation. The update has not been installed.

  (b) the update has been installed. However, a file was not updated to restart the computer.

  In order to diagnose the problem, you can check in the history of Windows Update if the update has been successfully installed.

  See the Windows updates are installed

  You can follow this link and check if the problem persists.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  Hope the helps of information.
  Please post back and we do know.

• Strange problems with the database

  Hello

  I just got my Fuze and am very happy with it; However, I am having a very strange problem with the database. I have a 16 GB sdhc card that I use with the "rocket" and there are about 4 songs on the card that will not play and have no information charge tag. Their tags appear in the tag browser (not the in the track information screen) as just an empty rectangle. Under the track information screen, sizes are listed as ~ 4000 mb. The songs will not play and I can not jump in front of one of these songs once they were loaded.

  At first, I suspected some kind of corruption of tag, so I set out that night to track down the problem. I removed the 16 GB card and reset the player. Then, I loaded one of the corrupt in the internal memory of the player. The track has been scanned and played correctly. Then, I removed the track of the internal memory and it loaded on another SDHC card. Yet once, everything worked correctly, so I knew that the card I was using was a kind of system files or physical problem. I returned the original 16 GB sdhc card in the reader and checked that the file was still unplayable, and then I plugged the "rocket" to my computer. I transferred the unplayable file on my computer and compared (with md5sum) to the original file, thinking that if there was the file system or physical corruption the copy of the map would be damaged. However, the files were equivalent.

  To make things even more interesting, I also have problems with the registration of the kind. I have some files tagged Genres such as 'Classic' and 'Rock '. In the list of the genre, I see this:

  C

  CL

  CLA

  CLAS

  Class

  Classic

  Classic

  Classica

  Classic

  Rock

  So, there is corruption on the kind of 'Classic' but not the kind of "Rock". Each of the substrings of 'Classic' contains only a few titles, with most of the other titles listed where they should be. I checked that the tracks are labeled correctly and in exactly the same way as the other tracks that do not have this problem.

  I am at a total loss about what to do, and I'd really appreciate any advice or suggestions. I use the current firmware, 2.03.31a and the songs in question are in Ogg Vorbis format.

  MM

  Thanks for your replies.

  I managed to find what may be the problem. Tracks that received corrupt tags had the names of total path with more than 256 characters. It seems that the driver internal fat32 the rocket uses vomits all over the place when the path name is too long. Before the "rocket", I got an iPod running rockbox tags with the same directory structure that I have on the "rocket", so I don't think that this restriction on the length of the path name is a limitation or requirement of the fat32 file system. Reduce the path corrected the problem with the files being unreadable.

  However, the problem with foires genres the rest. Looking at the files show that corruption, they all have a little information in tags. Most of the information is contained in the hashes I have files that identify them via musicbrainz. The limit on the total number of characters in the tags of the track includes the "rocket" label is not read or use?

  MM

• Strange problem with HP OfficeJet 6500 709n

  I have a very strange problem with my printer HP 6500 E709n wireless network.  I have recently upgraded to Windows 8 and everything worked well.  Then, all of a sudden I wasn't able to scan more.  The HP Solution Center says that the printer is disconnected.

  The weird part is that it appears in the section of Control Panel as active and properly connected printer and devices and I can still print to it, but not scan to it. He also says in the network section of the HP solutions center that the printer is connected and ready.  The printer is connected to my wireless network and I also use it with a Mac Mini.  The Mac can print and scan to it.

  No idea why this is happening and how to fix it?  Thank you.

  This problem of not being able to scan only started after upgrade to Windows 8?

  If so, then to solve the problem, you must first uninstall the Windows 7 software and then reinstall the software of Windows 8 long.

  To uninstall the software, follow these steps:

  1 right-click or press on and hold the lower left corner of the screen, then click or type programs and features. A list of installed programs.
  2. click or tap the name of your HP printer, and then click or tap on uninstall.
  3. follow the on-screen instructions to uninstall the software.

  After you have uninstalled it, go ahead and download the full software features for your printer. It can be found on the link below.

  Driver and HP Officejet Full Feature software

  Install this version of the software and try to scan now!

  Let me know if it works for you, good luck!

  -Kyle

• I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

  I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

  

  In addition, the Console has opened with the same message several times, but I don't know what that means.

  Any help would be appreciated.

  Hello

  The last is a picture of the Terminal window.

  Just because it lists 'Console' does not mean that it has nothing to do with this application.

  You have not said why or what you're trying to install so I can't help with that.

  You can use the activity monitor to leave their.

  After you select an item, use the X in a type of stop sign icon and confirm force quit.

  

  21:36 Thursday; September 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• strange problem with Ericsson H5321

  Hello

  I have a strange problem with Ericsson H5321 on my X 230. Until a few weeks ago, the card worked perfectly as a modem (at least on Linux, so I guess it would be too much work in Windows). Unfortunately, a few weeks ago disappeared from the network manager modem connection. I checked that all the special device for this files still exist:

  $ because I in/sys/class / * / * {ACM, wdm} * / device/interface; echo-n "${i}: ';" $ Cat {i}; fact
  
  / sys/Class/TTY/ttyACM0/Device/Interface: H5321 gw Broadband Mobile Modem
  
  / sys/Class/TTY/ttyACM1/Device/Interface: H5321 gw Mobile broadband data Modem
  
  / sys/Class/TTY/ttyACM2/Device/Interface: H5321 gw Mobile Broadband GPS Port
  
  / sys/Class/usbmisc/CDC-wdm1/Device/Interface: H5321 gw management of mobile devices to wide band
  
  / sys/Class/usbmisc/CDC-wdm2/Device/Interface: H5321 gw Mobile Broadband USIM Port
  $ lsusb | grep Ericsson
  
  

  .. .and I also checked it works like GPS (at least kind of: it generates data on/dev/ttyACM2 NMEA streams, but cannot get a GPS fix even after 45 minutes with access to an open sky).

  Then I tried to run windows 7 and the card is visible in the "Device Manager", but there is also no possibility to create the GSM connection in the connection menu in the bottom right.

  I tried a new install of Windows 7, I tried to reset the BIOS (even with the removal of the battery backup), but still I can't force them to work again. My BIOS is fully upgraded BTW: the problem appeared during the use of 2.61 and I also tried with recently published 2.62.

  My cell phone is always on the extended warranty, but as modem bought in line with the basic configuration it was only covered by the warranty of 12 months has expired

  Today it came to my mind that, as the modem itself seems a little work (present, responsive GPS device) then maybe it's a SIM card reader that is actually damaged (which would explain a bit why the camera itself is present, but I can't create a connection). Can someone confirm or deny my theory? If it is valid, then I could still replace SIM card reader because it is part of the basic configuration.

  Thanks a lot for your suggestions!

  [Mystery solved: I managed to put the SIM card on a wrong side...;]
  [I hate myself so muuuuch;]
  ([btw: Lenovo could fix their SIM card reader, so there is only one possible way to put a SIM card using his corner of heart: it would have saved me 2 days of stress and an investigation;]) )

• Strange problem with BT Headset!

  Hello

  I have a very strange problem with BT headset.  My Z3 is model of official unlocked Docomo of SO - 01 G.  I got PlayStation Voxtube 500 BT headset BT version is THE 4.0.  This headset has been used with Nexus 5 (Android 5.1.1) without any problem and the battery last almost a week to stanby with a few minute talk time per day.  However, after not getting Z3 with Android 4.4.4, pairing with Voxtube has no problem.  Then, the battery is discharged within 4-5 hours stanby.  I tested it for 3 or 4 times, it has come down to that there must be something worng with the battery of the headset.

  So, I got with PlayStation representative claim (it is only a few months old).  Surprisingly, representative of PlayStation has all the test suggested no stanby time problem with their phones iPhone 5 or Sumsung Galaxy S5.  Then I took back recharged so its performance is very short wait duration the same as before.  So, I tested it with my iPad Mini 3 and performance return to normal standby time.

  So, it can be concluded for only problem is with the Z3. But once again with the mating with the other headset BT Jabra Tag2, stanby time is within the normal range (4-5 days).  When that happens?  I am very confused. Should I give up on PlayStation?

  Thank you for your time,

  Simply upgrade to 5.0.2 lolipop and hope this will help me on this issue.

• Strange problem with HorizontalFieldManager - it does not show on real device bitmap

  I have a rather strange problem with the HorizontalFieldManager on my Blackberry 8820, which I did not on the Simulator, or done other blackberries that I tried to install my game.

  The problem is that bitmaps that I add, do not appear on the actual device, as in the images below. The code is provided below as well. No idea how to debug, or resolve is appreciated.

  Here's what I see on Simulator and some devices

  

  Here's what I see on the real blackberry:

  

  Code:

  ......

  OK, I found the solution - the problem is that there seems to be a bug where you can't put more fields button radio on a horizontal layout manager with 4.2.2.x.

  The solution is to extend the RadioButtonField field and replace the positioning method:

  RadioButtonField radioField = new RadioButtonHack ("", textureGroup, isSelected);

  SerializableAttribute public class RadioButtonHack extends RadioButtonField {}

  public RadioButtonHack() {}
  Super();
  }

  public RadioButtonHack (String label, group RadioButtonGroup,
  Boolean selected, long style) {}
  Super (label, group, selected, style);
  }

  public RadioButtonHack (String label, group RadioButtonGroup,
  Boolean selected) {}
  Super (label, selected group);
  }

  public RadioButtonHack (label As String) {}
  Super (label);
  }

  Protected Sub layout (int width, int height) {}
  int temp = this.getPreferredWidth ();
  setExtent (time, height);
  Super.Layout (time, height);
  }

  }

  resolved http://supportforums.blackberry.com/t5/Java-Development/radiobuttonGroup-related-problem-in-storm/m-...

• Strange problem with ASDM

  Hi, today we had a strange problem with one of our 5550. I worked through ASDM on it and all of a sudden I couldn't connect via asdm on the interface of management or inside interface. Nothing helps.

  When I connected with a vpn, then use asdm, it works. My ip on the network when it did not work was 1xx.xxx.81.235. When I use the vpn is a 1xx.xxx.55.1 from a different ip address. I can build a connection on the inside interface with asdm (with vpn).

  I tried closed and without stop the interface of man, that does not.

  It may be that the things asa, I am an intruder and dynamically blocks my netwerk range? If yes where can I find this info.

  Other users of our team had the same problem.

  I also checked the syslog nothing.

  THX,

  Marc

  Although I've ever experienced this myself, but if the running-config has not changed and worked before its possible that the ASA

  may have shunned your connection?

  To the CLI:

  # sh shun

  look if your IP address is present, if any make:

  # claire shun

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/protect.html#wp1058270

  More than likely it is do to a change to the running configuration, I would start by looking at a previously working with the gift of running-config running-config.

• Strange problem with find/replace

  I'll have a little strange problem with find/change in InDesign CS4 Mac.

  The document is a data merge.  In the worksheet, there are two fields that contain either a '@' or a '&', depending on the context.  These are just placeholders - the plan was to convert glyphs of the police 'Wingdings 2' after creating the merged document.  We do it this way because we couldn't figure out how to get the glyphs themselves in the .csv file.  Two glyphs are < FO54 > and < FO56 >.

  First I used find/replace to change all the '@' symbols to < FO54 >.  That has worked well. But then when I tried to change the symbols "&" < FO56 >, I got the < FO54 > again instead.  In fact, now I ask what glyph, I get < FO54 >.  Find/replace always normally works for normal text... it of just that he seems to have decided that if I ask a glyph, I get < FO54 >, anything.

  I tried to shut down and restart, but the bug is still there.

  Any thoughts?

  I used the tabs of glyphs in find/replace when I tested it, but what you describe seems to work as well.

• Strange problem with measurement of the color under Mac.

  Hello, I have a strange problem with measurement of the color under Mac. For example I create a gradient in Photoshop color 200 200 200 color 240 240 240. When I measure the color of the gradient with the Photoshop color measurement tool or with the built in OS X color measurement tool measured color is of 200 199 197 to 240 240 238. I measured the same gradient with Photoshop for PC and the values are OK (the same values that I create).

  I don't know what the problem is, but I think that the colors that I create are the same I have measure after creating them and also values between Mac and PC. I appreciate much help or information you could give me that helps me understand what is happening here.

  Thank you for your time

  Marcelo.

  Yep, you guessed it, evidence as monitor basically removes all profiling and just offer it right.

  is it possible to make the OS X color measurement tool to measure the original color values

  You mean the colors of paper - No., as I said photoshop filter your image through the profile document, proof of installation and the monitor profile. Why use Digital color meter for this though?

  I don't understand what is measurement of color values that will change every time point calibrate it my monitor.

  Because color values are "larger" what is on your monitor. Your monitor (via photoshop) makes only the best he can to display these values, which can be anything from LAB colors outside the range of your monitor - to the CMYK color. Calibration, it is the only way to allow your monitor to do this in any way accurately. (never really impossible) The monitors have a certain range and are only representations / would the REAL colors who is the holder of a document, with a profile. There's only one good reason to measure the monitor values so that is to build a monitor profile.

• my iphone 5 c opens more after that I was invited to be updated with itunes. now, the display shows only itunes usb cable and logo. read some tips here, but nothing happened. any help will be much appreciated.

  My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.

  https://discussions.Apple.com/message/30014877#30014877http ://

  Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.