Strange problem with the module memory series Satellite Pro 4300

Similar Questions

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• Strange problems with the database

  Hello

  I just got my Fuze and am very happy with it; However, I am having a very strange problem with the database. I have a 16 GB sdhc card that I use with the "rocket" and there are about 4 songs on the card that will not play and have no information charge tag. Their tags appear in the tag browser (not the in the track information screen) as just an empty rectangle. Under the track information screen, sizes are listed as ~ 4000 mb. The songs will not play and I can not jump in front of one of these songs once they were loaded.

  At first, I suspected some kind of corruption of tag, so I set out that night to track down the problem. I removed the 16 GB card and reset the player. Then, I loaded one of the corrupt in the internal memory of the player. The track has been scanned and played correctly. Then, I removed the track of the internal memory and it loaded on another SDHC card. Yet once, everything worked correctly, so I knew that the card I was using was a kind of system files or physical problem. I returned the original 16 GB sdhc card in the reader and checked that the file was still unplayable, and then I plugged the "rocket" to my computer. I transferred the unplayable file on my computer and compared (with md5sum) to the original file, thinking that if there was the file system or physical corruption the copy of the map would be damaged. However, the files were equivalent.

  To make things even more interesting, I also have problems with the registration of the kind. I have some files tagged Genres such as 'Classic' and 'Rock '. In the list of the genre, I see this:

  C

  CL

  CLA

  CLAS

  Class

  Classic

  Classic

  Classica

  Classic

  Rock

  So, there is corruption on the kind of 'Classic' but not the kind of "Rock". Each of the substrings of 'Classic' contains only a few titles, with most of the other titles listed where they should be. I checked that the tracks are labeled correctly and in exactly the same way as the other tracks that do not have this problem.

  I am at a total loss about what to do, and I'd really appreciate any advice or suggestions. I use the current firmware, 2.03.31a and the songs in question are in Ogg Vorbis format.

  MM

  Thanks for your replies.

  I managed to find what may be the problem. Tracks that received corrupt tags had the names of total path with more than 256 characters. It seems that the driver internal fat32 the rocket uses vomits all over the place when the path name is too long. Before the "rocket", I got an iPod running rockbox tags with the same directory structure that I have on the "rocket", so I don't think that this restriction on the length of the path name is a limitation or requirement of the fat32 file system. Reduce the path corrected the problem with the files being unreadable.

  However, the problem with foires genres the rest. Looking at the files show that corruption, they all have a little information in tags. Most of the information is contained in the hashes I have files that identify them via musicbrainz. The limit on the total number of characters in the tags of the track includes the "rocket" label is not read or use?

  MM

• Problem with the module "Automation" in WindowsAzure

  Top: Problems with the module used "Automation" service "WindowsAzure.

  Hello!

  I really need your help to decide my problem of "Azure Automation". My boss has set a task for the 'Automation' module allows you to make a backup of Virtual Machines.

  To understand my problem, I do the next:

  1. describe the situation of all;

  2. describe the problems that appear in this situation;

  3. my conclusions.

  In addition, I am attaching the necessary information: my PS-scripts (from Windows and the automation of azure), log (with my notes) and screenshots (images with my notes) see file .rar Add_info (annex).

  1 description any situation

  For our development projects, we have several Virtual Machines on service cloud "WindowsAzure. We need to make backups of discs with Virtual Machines each week. Earlier, for this task, I used Windows PowerShell on my computer and my PS-script (see Ann 0 - VM (backup) of the WPS_snapshot). I created a new storage 'backupstor' and containing 'snaps-drive '. When I run PS-script with my computer, I have backup of disks virtual Machin in the container "snaps-disk", without problem.

  Now I have a new task "automatically make the process of creating backup of Virtual Machines (VM snapshots). I tried to use automation module (overview). Can I change my PS script for the 'Automation' module and create folders (see Ann 1 - records (make backups of virtual machines) _Azure_Automation).

  I need to make a backup of Virtual Machine 'bosard' in the cloud 'cloudnet. "Bosard" on the disc size ~ approximately 90 000 000 000 bytes (total size of the default drive size 127 GB/136 367 309 312 bytes)

  2. description of the problems that appear in this situation

  My steps:

  1. I start files to make a backup of Virtual Machine disk (see annex 1 - files (make backups of virtual machines) _Azure_Automation))

  2. it starts successfully and generate the name of backup 1 (blob) - snapshot-bosard - osdisk_07.10.2014_07h00m39s.vhd (see image 1 - start copy backup 1 and annex 2 - log file copy process)

  3. the process of backup copy 1 (blob) will...

  Problem 1:

  4. the process of backup copy 1 (see Appendix 2 - process log file copy) automatically stops and complete to copy the part 1/3 bytes copied 28311552000only. Important: The size of my virtual machine disk ~ on 90 000 000 000 bytes.  (Maximum possible) of total capacity of the disk where the Virtual Machine is used - 136 367 309 312 (127 GB). (See picture 2 - stop backup copy 1)

  5. I have Virtual size 1 backup - 28311552000bytes, when the size of my VM - 90 000 000 000 / 136 367 309 312 bytes.

  Problem 2:

  6. after the termination of the process automatically makes copy backup 1, records (see annex 1 - files (make backups of virtual machines) _Azure_Automation) automatically start (see picture 2 - stop backup copy 1) and folders automatically create new snapshot Backup 2 - name - bosard - osdisk_07.10.2014_07h31m33s.vhd (see annex 2 - process log file copy, image 3 - stop the copy backup 1 & Begin copy backup 2 and 5 - backupStore_Azure (process)of image)

  7. I pressed "stop" and stopped the process of copy and folders (picture 4 - I stopped the process of creating backup 2 & records). And how result I had size Backup 1 and 2 = 0 bytes (see image 6 - backupStore_Azure (I order records))

  Note:

  1 problem 1: the process of backup of virtual machine does not complete and stops automatically.

  2 problem 2: the process of creating new second backup starts automatically. And as a result, we do not have the backup of virtual machine, when I use the 'Automation '.

  3. my conclusions

  I think that:

  1. my PS script for Automation (files) is not correctly. Then I need your help, how to fix this.

  2 may be the module "Automation" is not working correctly. And the module 'Automation' needs repairs and settings.

  In addition, I am attaching the necessary information (see the Add_info (annex) .rar file):

  Ann WPS_snapshot 0 - VM (backup)

  Ann 1 - records (make backups of virtual machines) _Azure_Automation

  Ann 2 - log file copy process

  image 1 - start the copy backup 1

  image 2 - stop copy backup 1

  image 3 - stop copy backup 1 & Begin copy backup 2

  4. I stopped the image create backup processes 2 & records

  image 5 - backupStore_Azure (process)

  image 6 - backupStore_Azure (I order records)

  Thank you

  Kind regards

  Mikhail

  Hello

  You can get the assisted support from the following link on this point:.

  http://azure.Microsoft.com/en-us/support/options/

• strange problem with the database link

  Hello world
  
  I have a strange problem with the link of database in Oracle 11 g Express Edition;
  There are two computers: computer-server and the client computer. Tnsnames.ora are the same on both computers IE.
  
  CT =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  )
  (CONNECT_DATA = (SERVICE_NAME = XE)
  )
  )
  
  I created the database link:
  
  Create database link zdalny
  Connect to < user_id > identified by < password >
  using "CT".
  
  Customer cannot connect with server when I do not use above the command. But when I change 'use' for using "krzysztof:1521" or by using "krzysztof" or "server IP:1521" - everything is ok.
  
  Why I ask. Because in all the materials that I read about Oracle command with the help of "CT" should work correct. But there is no. Do you know why?
  
  Thanks in advance and apologize me for my English.
  
  Rgds
  Krzysztof

  Here's the tnsnames of your server, but to connect to the oracle server db (any client or to another instance of db oracle), you must install oracle client.
  However, in your condition, you want to connect the DB1 Oracle OracleDB2 using a link db, I'm right? In this case you should always set the entry in the tnsnames.ora
  To verify that you can connect to Oracle DB2 from DB1 Oracle, you can use tnsping in the command line.
  In your case

  c:\tnsping CT
  

  Krzysztof Szymaniak wrote: CT =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )

  Check your tnsnames entry in the machine, you are trying to connect to. And check if the tnsping is successful.
  Sometimes the error message says not everything, which means that you need to troubleshoot yourself and learn from the experience.
  Always in the opposite case, refer to the documentation.

  See you soon.

  Published by: Spongebob December 14, 2011 09:30

• Strange problem with the formatting of the text

  Hello

  I had a strange problem with the formatting of the text. I created a document in Polish language and the strange thing happens when it divides the word to the next line. For example here on this part of the page, I have a word "umieszczamy", which should be divided "' u - CEF - szcza - my", but my Indesign divides in umi-eszczamy (as shown on the picture). " How can I fix it so it divides the word correctly?

  Concerning

  

  What language is awarded when you select the text? Hyphenation, but also the spelling, is controlled by the dictionary that is assigned to the text.

  If the language is correct, you might have to change the hyphenation in the user dictionary.

• Strange problem with its virtual on my Satellite A100

  I have a problem with Virtual Sound on my Satellite A100-638 with Windows XP. If VS is turned on and Windows plays a sound of Windows, as when an error appears, the volume increases.

  When the VS is off, the problem does not exist, but I would have turned on VS, cause, I play a lot of music! I tried to upgrade level or upgrade to other versions of VS, but the problem is still there. I also tried to uninstall and install my sound card drivers.

  Can someone help me with this?

  Hello

  I put t know what is the problem. Your description is incomplete and very strange.
  Usually it's not easy to say what's wrong because you have already installed the 3rd party applications that could only unique functions or have a bad influence on all operating systems.
  I assume that the registry is damaged.

  If we can continue the speculation after the recovery completely portable.

• Error message "A problem with the cooling system" on Satellite A660

  Hi all

  Hope I can get help here. I got about 5 laptop computers HP after each of them had problems and errors. I got sick of them and so got a refund and bought a high spec A660-1FH.

  The A660 is a great laptop for two days until yesterday when I started having a saying of warning message "a problem with the cooling system has been detected. Please turn off the power immediately and return it for service "."

  The cpu fan works fine you can here it turns and the temperature of the processor i5 - 460 m is around 40 degrees for two hearts - that seems normal to me. I noticed that this happens only when running on battery, and if you switch from eco utility to the power saving mode. Its fine when running on the "balanced" power setting The fan is louder before when this message appears.

  Like its less than 28 days my retailer swapped it for a brand new immediately. Got a new home page, and the same message reappears. Everyone knows this. Like two laptops had this, I was wondering if it is normal that the laptop A660 series or if it was really a hardware problem?

  I tried to update the eco utility and the bios of the laptop, but the two are the latest versions. Can someone help or share if they have a similar problem with their laptop?

  Thank you

  In front of me, I have Satellite A660-13 q (PSAW3E) and I have about 6 weeks now. It works almost 10 hours a day and so far I didn't notice this message or anything that may be suspect for the operation of the equipment.

  I put really know why this happen on your laptop and don t think that there is nothing you can do about it.
  I would trade it again. What you can also try is to contact the closest service Toshiba. Make a call, explain the situation and ask if they can help you with this.

• Problems with the installation of recovery - Satellite A300D - BSOD

  Hello

  The laptop in question (TOSHIBA Satellite A300D) recently stopped starting (BSoD).

  So, I tried using the recovery disk, but there is no help. What happens is:
  -After about 10 minutes of waiting, the first language menu load, so I click on "next".
  - Then I again click Next and accept the message that my HARD drive will be erased
  - Then I see a cmd prompt that says "try to remove all the letters of partitions possible...". »
  -There is also a minimized command prompt that says something like "RAID failed to initialize."
  -And then nothing happens.

  Is this a hardware problem? I also tried a full installation (instead of recovery), which, even once, is simply not. None of the errors is - it just freezes.

  Any help appreciated.
  Thank you.

  It is not easy to tell what can be the problem, but if you were not able to install the OS by using two different facilities CDs/DVDs, so there must be a problem with the HARD drive.

  The warranty is still valid?
  I mean you can contact the nearest Toshiba authorized service provider and explain the situation. They can swap the HDD and again test the recovery procedure.
  Can you get somewhere 2,5 SATA HDD for testing?

• Problems with DVD/CD-RW on Satellite Pro M series

  After searching the Forum questions / answers, it seems that many users have problems with the carpet * a 841 s UJ which is equipped with several types of Toshiba portable computers and I wonder why someone from Toshiba has not been able to intervene and to produce a final solution.

  In my case, I can not format a CD - RW or a DVD + RW because the message "D:\ is not accessible" and also "incorrect function".

  If DLA is selected in properties, can be as much as to be shown to a format selection window, but "Format failed due to general failure" happens.

  Toshiba installation CD will work OK (I did this several times after losing data on the hard drive) but the writing seems to be beyond the capacity of the disc.

  Does anyone have any suggestions?

  BTW, the deletion of "Upper and Lower Filters" registry that I have seen offered as a solution will not work because there is only one entry for low filter - no higher.

  You try to format the two supports using Windows option or using an application like Nero?
  I can't imagine that there is a serious problem with ODD. Test it with Nero. I'm sure it will work properly.

• Strange problem with the keyboard event listener

  I have a full screen touch app. To close the application, I set an event listener on keyboard for the key "0". I don't want the press user due to some restrictions Alt + F4 key combination. Problems begin when the application loses focus. Here's the code;

  protected function onComplete(event:FlexEvent):void
  {

  this.setFocus ();
  this.addEventListener (KeyboardEvent.KEY_DOWN, trapKeys, true, 0, true);

  }

  private void trapKeys(e:KeyboardEvent):void {}
  
  If (e.keyCode == 96) {}
  This.Close ();
  }
  
  Else if (e.keyCode == 48) {}
  This.Close ();
  }
  
  }

  When the user change the screen to a different with Alt + TAB application, or any other combination of keys flex app loses focus and does not work when he turns back to my app "0". How can I solve this problem?

  Thanks in advance.

  Hi, Ahmed.

  I have absolutely no problem with the solution you are trying to set up - you use mode full-screen interactive mode of keyboard?

  Please consider:

  on full add keyboard listener

  protected function applicationCompleteHandler(event:FlexEvent):void

  {

  this.stage.addEventListener (KeyboardEvent.KEY_DOWN, trapKeys);

  };

  //

  protected function applicationActivateHandler(event:AIREvent):void

  {

  If (this.stage)

  {

  switch the State to display full-screen when activated

  If (this.stage.displayState! = StageDisplayState.FULL_SCREEN_INTERACTIVE)

  {

  this.stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;

  };

  };

  };

  //

  private var exitHandled:Boolean = false;

  on NUMBER_0 | NUMPAD_0 exit-close

  protected function trapKeys(event:KeyboardEvent):void

  {

  If ((event.keyCode is Keyboard.NUMBER_0

  || event.keyCode is Keyboard.NUMPAD_0)

  (& this.exitHandled == false)

  {

  exitHandled = true;

  this.stage.removeEventListener (KeyboardEvent.KEY_DOWN, trapKeys);

  This.Close ();

  };

  }

  (Note: applicaton of the events 'applicatonComplete' and "applicationActivate" are routed to over managers)

  Kind regards

  Peter

• Which module memory for Satellite Pro M70?

  Hello! First post here, happy to join :)

  So, here is my question:
  I have a laptop M70 and want to upgrade the memory from 512 MB to 1 GB. I checked Toshiba online store and found that in fact 2 memory of 512 MB with the same characteristics (512 MB PC2-4300 DDR2 533 MHz) are supposed to do the job...
  The only difference is that the PA3412U - 1 M 51 is mentioned as "dual channel" and the PA3412U - 2M 51 is "RoHS compl.

  So, what is the good? Another problem is that I can not really get any of these two because the first one is "sold out" and the second is 'exhausted '! Laughing out loud

  But finding the correct for my system is a good first step, in my opinion. Thanks in advance! ;)

  Hello

  In this unit are 2 slots available and you can upgrade the memory for max 2048 MB (2x1024Mo). You can use DDR2 memory modules.
  I found information on the modules of memory support

  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  I would recommend to google for this part numbers and I m you will find an online store that offers this module.

• Satellite L850 - 1 H 4 - a strange problem with the FN key

  Hello

  I have a strange problem on my laptop. When I uninstall my PVAT my start "FN" key works, when I install it it s not working not properly. Its market not only the volume key (F9 and F10) without pressing the "Fn", if I want to press F9 or F10 I have to press FN + F9, even with the rest of the buttons.

  When I install PVAT I have to press FN, so I can use my F keys (e.g. F3 to search on the browser tool, alt + f4 - I have to press Fn + alt + f4), and I can't use real functions like mute, disable Touchpad etc. Use the volume keys only. Y at - it a problem if I run my computer without PVAT, this may affect its performance?

  Where could be the problem and can I fix it? I'm with Windows7 x 64, but the laptop was with no OS when I bought it. And there is a problem with this version, I bought its impossible to install the Pakc3 Service, it s with SP1, can be the problem? I put t know what to do... perhaps I run the laptop without PVAT, sounds good, because the buttons work fine without it, but I don't know if it interacts with something else.

  Thanks in advance!

  Its possible to use the function buttons by pressing another button without the use of the fn or FN.
  This option can be changed in the BIOS.

  Go to the BIOS by pressing F2.
  In the BIOS, choose Advanced-> system configuration Options
  Here you should find the option that allows to change the special function keys which allows you to use the function FN or without button Fn button

  By the way: this theme has already spoken here in the forum several times. therefore recommend that you use the advanced search to Forums before posting new thread

• Strange problem with the new ca and on Satellite M45 mouse adapter

  Hello

  Recently, my adapter had problem with load the laptop (model M45-S2692), so I bought another card. The new adapter has worked for a few months and now its behave differently.

  If I plug the adapter into the laptop, the mouse does not work and works otherwise.

  Does anyone have an idea on what could be the problem.

  Please advise.

  Concerning
  Suri

  Hey Buddy,

  Therefore, may I ask if the adapter that was purchased is an original toshiba AC adapter? Why didn t contact you a servicepartner, since they had probably had your sector-free adapter because you have something called guaranteed.

  How Don t you know the adapter you have, there where he knows do not so it s original or not, do not damage anything on your motherboard for your machine.
  Maybe it has nothing to do with your power adapter...

  I would appreciate comments on your part just a small one description which CA is, when you bought your machine and if the error could be reproduced with the removal of the AC.

  Welcome them