Strange problem with the object Panel.

Hi all! I found this forum in a desperate attempt to find a solution to my problem. I searched without success, but if has already replied to this question, can someone point me in the right direction?

FreeHand MXa works with Vista? (Or MX, I tried two versions of the disc in the box). I can install that's fine, no problem at all. When I actually started working, I noticed that the object Panel was not on the right side where it normally is, so I click on the window and you click object. Instead of giving me the Panel, I have a popup that says "Could not complete your request because an unknown command has occurred", and then a little box pop up that looks like it might be the object Panel, but it is empty. No marks, no nothing and it does not meet anything, except when I hit the button of output on this subject. It is the same version I had installed on my old computer. I got a new computer yesterday and I tried to install today and I can't understand why it doesn't let me open the object Panel. I'm so lost without it! Is there another way to work in FreeHand without it? I have Illustrator, but I really prefer working in Freehand for more things I did on a daily basis. It's just much faster for me to do some of the things I do. I need my object Panel...

This TechNote may help:

http://go.Adobe.com/kb/ts_tn_12050_en-us

Judy Arndt

Tags: FreeHand

Similar Questions

  • Strange problems with the database

    Hello

    I just got my Fuze and am very happy with it; However, I am having a very strange problem with the database. I have a 16 GB sdhc card that I use with the "rocket" and there are about 4 songs on the card that will not play and have no information charge tag. Their tags appear in the tag browser (not the in the track information screen) as just an empty rectangle. Under the track information screen, sizes are listed as ~ 4000 mb. The songs will not play and I can not jump in front of one of these songs once they were loaded.

    At first, I suspected some kind of corruption of tag, so I set out that night to track down the problem. I removed the 16 GB card and reset the player. Then, I loaded one of the corrupt in the internal memory of the player. The track has been scanned and played correctly. Then, I removed the track of the internal memory and it loaded on another SDHC card. Yet once, everything worked correctly, so I knew that the card I was using was a kind of system files or physical problem. I returned the original 16 GB sdhc card in the reader and checked that the file was still unplayable, and then I plugged the "rocket" to my computer. I transferred the unplayable file on my computer and compared (with md5sum) to the original file, thinking that if there was the file system or physical corruption the copy of the map would be damaged. However, the files were equivalent.

    To make things even more interesting, I also have problems with the registration of the kind. I have some files tagged Genres such as 'Classic' and 'Rock '. In the list of the genre, I see this:

    C

    CL

    CLA

    CLAS

    Class

    Classic

    Classic

    Classica

    Classic

    Rock

    So, there is corruption on the kind of 'Classic' but not the kind of "Rock". Each of the substrings of 'Classic' contains only a few titles, with most of the other titles listed where they should be. I checked that the tracks are labeled correctly and in exactly the same way as the other tracks that do not have this problem.

    I am at a total loss about what to do, and I'd really appreciate any advice or suggestions. I use the current firmware, 2.03.31a and the songs in question are in Ogg Vorbis format.

    MM

    Thanks for your replies.

    I managed to find what may be the problem. Tracks that received corrupt tags had the names of total path with more than 256 characters. It seems that the driver internal fat32 the rocket uses vomits all over the place when the path name is too long. Before the "rocket", I got an iPod running rockbox tags with the same directory structure that I have on the "rocket", so I don't think that this restriction on the length of the path name is a limitation or requirement of the fat32 file system. Reduce the path corrected the problem with the files being unreadable.

    However, the problem with foires genres the rest. Looking at the files show that corruption, they all have a little information in tags. Most of the information is contained in the hashes I have files that identify them via musicbrainz. The limit on the total number of characters in the tags of the track includes the "rocket" label is not read or use?

    MM

  • strange problem with the database link

    Hello world

    I have a strange problem with the link of database in Oracle 11 g Express Edition;
    There are two computers: computer-server and the client computer. Tnsnames.ora are the same on both computers IE.

    CT =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
    )
    (CONNECT_DATA = (SERVICE_NAME = XE)
    )
    )

    I created the database link:

    Create database link zdalny
    Connect to < user_id > identified by < password >
    using "CT".

    Customer cannot connect with server when I do not use above the command. But when I change 'use' for using "krzysztof:1521" or by using "krzysztof" or "server IP:1521" - everything is ok.

    Why I ask. Because in all the materials that I read about Oracle command with the help of "CT" should work correct. But there is no. Do you know why?

    Thanks in advance and apologize me for my English.

    Rgds
    Krzysztof

    Here's the tnsnames of your server, but to connect to the oracle server db (any client or to another instance of db oracle), you must install oracle client.
    However, in your condition, you want to connect the DB1 Oracle OracleDB2 using a link db, I'm right? In this case you should always set the entry in the tnsnames.ora
    To verify that you can connect to Oracle DB2 from DB1 Oracle, you can use tnsping in the command line.
    In your case

    c:\tnsping CT
    

    Krzysztof Szymaniak wrote: CT =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = XE)
    )
    )

    Check your tnsnames entry in the machine, you are trying to connect to. And check if the tnsping is successful.
    Sometimes the error message says not everything, which means that you need to troubleshoot yourself and learn from the experience.
    Always in the opposite case, refer to the documentation.

    See you soon.

    Published by: Spongebob December 14, 2011 09:30

  • Strange problem with the formatting of the text

    Hello

    I had a strange problem with the formatting of the text. I created a document in Polish language and the strange thing happens when it divides the word to the next line. For example here on this part of the page, I have a word "umieszczamy", which should be divided "' u - CEF - szcza - my", but my Indesign divides in umi-eszczamy (as shown on the picture). " How can I fix it so it divides the word correctly?

    Concerning

    forum.jpg

    What language is awarded when you select the text? Hyphenation, but also the spelling, is controlled by the dictionary that is assigned to the text.

    If the language is correct, you might have to change the hyphenation in the user dictionary.

  • Problem with the swatches Panel

    There is a problem with my Swatches Panel.

    When I select an object that can be colored in the page, such as a box, I choose a color for it in the swatches Panel. but, the little icon top left of this Panel that normally indicates if the color is applied to the fill or line, is empty. I can click on the arrows swap fill and stroke, near the icon and the fill and stroke will swap; but the icon is empty... just gray.

    Indicators of background and outline in the Panel of colors and the toolbar but displays correctly, however.

    The swatches Panel is displayed correctly when logged in another account.

    I'm on a Mac and tried to screw up the "idcs5_Swatches Panel.mxi" and "idcs5_Swatch Library Panel.mxi" files or not available.

    Is there another file I should try screw up? Could this be a conflict with another program?

    Thank you!

    Have you tried to screw up your general preferences?  Link here...

  • problem with the properties panel

    I have a problem in photoshop with the properties panel that no poster the property, how can we solve this?

    Try to clear your PS preferences.

    Waiting for launch

    Mac: Command + Option + shift + command
    Windows: CTRL + Alt + Shift

  • Strange problem with the keyboard event listener

    I have a full screen touch app. To close the application, I set an event listener on keyboard for the key "0". I don't want the press user due to some restrictions Alt + F4 key combination. Problems begin when the application loses focus. Here's the code;

    protected function onComplete(event:FlexEvent):void
    {

    this.setFocus ();
    this.addEventListener (KeyboardEvent.KEY_DOWN, trapKeys, true, 0, true);

    }

    private void trapKeys(e:KeyboardEvent):void {}

    If (e.keyCode == 96) {}
    This.Close ();
    }

    Else if (e.keyCode == 48) {}
    This.Close ();
    }

    }

    When the user change the screen to a different with Alt + TAB application, or any other combination of keys flex app loses focus and does not work when he turns back to my app "0". How can I solve this problem?

    Thanks in advance.

    Hi, Ahmed.

    I have absolutely no problem with the solution you are trying to set up - you use mode full-screen interactive mode of keyboard?

    Please consider:

    on full add keyboard listener

    protected function applicationCompleteHandler(event:FlexEvent):void

    {

    this.stage.addEventListener (KeyboardEvent.KEY_DOWN, trapKeys);

    };

    //

    protected function applicationActivateHandler(event:AIREvent):void

    {

    If (this.stage)

    {

    switch the State to display full-screen when activated

    If (this.stage.displayState! = StageDisplayState.FULL_SCREEN_INTERACTIVE)

    {

    this.stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;

    };

    };

    };

    //

    private var exitHandled:Boolean = false;

    on NUMBER_0 | NUMPAD_0 exit-close

    protected function trapKeys(event:KeyboardEvent):void

    {

    If ((event.keyCode is Keyboard.NUMBER_0

    || event.keyCode is Keyboard.NUMPAD_0)

    (& this.exitHandled == false)

    {

    exitHandled = true;

    this.stage.removeEventListener (KeyboardEvent.KEY_DOWN, trapKeys);

    This.Close ();

    };

    }

    (Note: applicaton of the events 'applicatonComplete' and "applicationActivate" are routed to over managers)

    Kind regards

    Peter

  • Satellite L850 - 1 H 4 - a strange problem with the FN key

    Hello

    I have a strange problem on my laptop. When I uninstall my PVAT my start "FN" key works, when I install it it s not working not properly. Its market not only the volume key (F9 and F10) without pressing the "Fn", if I want to press F9 or F10 I have to press FN + F9, even with the rest of the buttons.

    When I install PVAT I have to press FN, so I can use my F keys (e.g. F3 to search on the browser tool, alt + f4 - I have to press Fn + alt + f4), and I can't use real functions like mute, disable Touchpad etc. Use the volume keys only. Y at - it a problem if I run my computer without PVAT, this may affect its performance?

    Where could be the problem and can I fix it? I'm with Windows7 x 64, but the laptop was with no OS when I bought it. And there is a problem with this version, I bought its impossible to install the Pakc3 Service, it s with SP1, can be the problem? I put t know what to do... perhaps I run the laptop without PVAT, sounds good, because the buttons work fine without it, but I don't know if it interacts with something else.

    Thanks in advance!

    Its possible to use the function buttons by pressing another button without the use of the fn or FN.
    This option can be changed in the BIOS.

    Go to the BIOS by pressing F2.
    In the BIOS, choose Advanced-> system configuration Options
    Here you should find the option that allows to change the special function keys which allows you to use the function FN or without button Fn button

    By the way: this theme has already spoken here in the forum several times. therefore recommend that you use the advanced search to Forums before posting new thread

  • Strange problem with the KING and IMAQ find right 3 edges

    So first of all, I noticed that the KING produced by KING features seems to have an incompatibility with the entrance to find right IMAQ 3 edges:

    In my code, I have the strange problem "IMAQ find right edges 3" is the production of edges that lie outside the limits by the wired KING specifided: "."

    In this case, a return on investment, defined by a rectangle, I [476, 1559, 752, 1779], but the best line produced by VI shape is outside this rectangle (see ordered 1876).

    How is that possible?

    I finally thought to it - it was my fault. I was updating the global rectangle in the KING entered correctly, but not the contours.

    I fixed the wiring and now it works fine.

    Detective Conan!

    G

  • problem with the control panel.

    I have a laptop with win7 32 bit. I installed 3 days ago and yesterday when I want to go in Panel said that Explorer Windows has stopped working. Except that everything works perfectly.
    I don't know what to do, I tried everything. I did the test of memory, I checked all the files *. Cpl, I scan the viruses and malware (I have kaspersky internet security), I put the control panel to show me that I can access the options menu, it does not work, I tried to install the patch 296 934 and he said something like that is not suitable for the operating system... I'm desperate, I don't know what to do.
    Can you help me please?

    Please excuse my English.

    IF it works in safe mode, you can use a clean boot to diagnose what is causing the problem. It won't take long to test.

    Another thing to try is to create a new user profile and connect through that to see if a new user can access control panel. You can delete the new account if it is not helping, or transfer your data to the new account if it helps.

    You might also consider trying a repair to re install - install windows 'above' of your existing system which should NOT replace your existing installation or data.

    Or, if this happened recently, you could try a system restore to a point before the error occurred.

  • Strange problem with the license...

    Hi all!

    I have a very strange problem and I got nowhere with navigation on all ads in this forum. My environment is as follows:

    An ESX 3.5 update 3 Server with 2 cards integrated network interface and two Intel Quad Port cards VT. I put the on board to be the port of the console and the other on board to be the network of Virtual Machines. Here are the two separate networks, separated by a Cisco firewall. The IP of the console is 10.10.10.10 and virtual machines are on a network of 172.16.10.x. I also have a VC (physical) server with network cards two, one on the 10.10.10.x network and the other network 172.16.10.x. I installed the license server on the VC, and she won the 172.16.10.x listening address (although I discovered he will listen on the network 10.x.x.x). Then I edited the file hosts on the ESX Server to include the VC server using a name resolution. I ping the name/address of the server successfully. I also have my firewall configured to allow all traffic between two networks (as long as the traffic is initiated by the 10.10.10.x network). I cannot see any errors or not on the firewall.

    The strange thing is that I am able to the ESX by VC license but it stays there for a little while and then loses the configuration. Then, I try to do it again without success. I point to the assessment option and it works again. I then point to the license server and takes it. I can do the same thing on the ESX itself with similar results. I tried to use the name of host or IP address; exact same results. The error simply indicates that the server could not find the license server.

    The really strange thing is that even when the server is authorized, any action I do on the server (configuration, start and stop VMs, etc) is extermely slow and some of them simply because of time.

    Did anyone have clues here? I'm lost...

    Thank you in advance. ?:|

    Tom

    Hi BDHHI.

    Do not know if she could solve your problems but... According to what you say, the license server becomes the 172... interface as the default interface. Go to network connections-> Advanced Options-> advanced settings and make sure that the interface with 10.10 IP... is on top, services will have this default IP address.

    On which network will be launching connection, maybe I'm wrong, but that it could be open in both directions.

    Kind regards

    AlexNG

  • Strange problem with the new ca and on Satellite M45 mouse adapter

    Hello

    Recently, my adapter had problem with load the laptop (model M45-S2692), so I bought another card. The new adapter has worked for a few months and now its behave differently.

    If I plug the adapter into the laptop, the mouse does not work and works otherwise.

    Does anyone have an idea on what could be the problem.

    Please advise.

    Concerning
    Suri

    Hey Buddy,

    Therefore, may I ask if the adapter that was purchased is an original toshiba AC adapter? Why didn t contact you a servicepartner, since they had probably had your sector-free adapter because you have something called guaranteed.

    How Don t you know the adapter you have, there where he knows do not so it s original or not, do not damage anything on your motherboard for your machine.
    Maybe it has nothing to do with your power adapter...

    I would appreciate comments on your part just a small one description which CA is, when you bought your machine and if the error could be reproduced with the removal of the AC.

    Welcome them

  • Strange problem with the keyboard

    Hello.
    I have problem with my keyboard. It works with delays. I don't know how to fix it.

    Hello

    What do you mean by working with delays?
    As far as I know, you can change the keyboard settings in the keyboard properties.
    Also, if you think that it s not a fault or parameters of software problem but hardware malfunction, you can try to contact the service agent.
    But before you contact the ASP you should recover the operating system.

    Good bye

  • strange problem with the PC just stops

    Hello

    I have a user who has a PC that keeps closing.  Well, I should say two PC.  After fighting with the issue works for several months and not getting anywhere, we decided maybe the 1st PC (Dell Optiplex 755) has just had a bad image or something and decided to give it just a PC brand new (Dell Opiplex 760).  Put a new picture on it and the applications she needs and bam... it is always set to zero.  The only things off the previous PC I parked has its Favorites IE, my Docs and desktop icons.  I thought it was just turn off then I swapped the surge by hope protector and has no good.  I spoke with the user and she says each time it shutsdown she gets a message "Windows is shutting down."  So, for me, it seems that there is something which is indicative of his PC through the shutdown process.

    After some research on his new PC, it seems that when restarting PC that this trend is coming in the case Log - in order of first at the last before the reboot.  I have attached the error and the description given when opening the error message in the event viewer.

    Userenv
    Windows cannot unload your registry file classes - it is still used by other applications or services. The file will be unloaded when it is no longer in use.

    Userenv 2
    Windows saved user PROD\patricyo registry while an application or service was still using the registry during log off. The memory used by the registry of the user has not been released. The registry will be unloaded when it is no longer in use.
    This is often caused by services running under a user account, try configuring the services to run in the NetworkService or LocalService account.

    ATISmart
    The service has started

    LMS
    LMS Service started

    PC Anywhere
    Host started
    Connection object: "C:\Documents and Settings\All Users\Application Data\Symantec\pcAnywhere\Hosts\pcaNSHost.bhf"
    Device type: TCP/IP
    Serial number: 0001-067A-0000-0000-0000-0000

    EACH
    Notification of the user service Intel (r) began.

    Security Center
    The Security Center service has stopped.  He was prevented from running by a software group strategy.

    Micorsoft Fax
    Fax service failed to initialize devices (virtual or TAPI) awarded faxes. Faxes cannot be sent or received until a fax device is installed.

    Microsoft Fax 2
    The outgoing routing rule is not valid because it cannot find a valid device. The outgoing faxes using this rule will not be routed. Check that the devices or target device (if it is routed to a group of devices) is connected properly installed and activated. If routed to a group, make sure that the group is configured correctly. Country code: ' *' area code: ' *'

    When your PC works fine for 3 or 4 days this chain of events is not displayed.  There are only political messages.  Have you ever seen something like that before or have any idea where I might start?  :)

    Thank you

    Rich

    It's funny.  It ends up being the user had a key on the keyboard value 'Shutdown' PC.  Some _ of Belkin keyboard.  Finally, she said "I think it happened shortly after clicking this key."  It was after we gave him a new PC since the follow-up of the matter on the image of the all-new and fresh PC.

    Funny stuff.  I love, hate my work :)

  • Strange problem with the default location of Documents

    I have recently reinstalled Windows after a hard disk failure. Fortunately, I had previously moved the library of 'My Documents' to a secondary drive, so I don't lose anything. Merge all records (i.e. move the new default library to merge with the library on my secondary drive) seemed to cause some problems with some file search programs, then my new primary drive being much bigger than my old one that I decided just to move the library of My Documents from my drive C (the OS partition).

    Here's the weird part: under start > Documents (right click) > properties, I have the save location set to C:\Users\MyName, which (I think) is normally by default when you install Windows. But if I click on "restore defaults", it switches to the root of one of my secondary drives (drive E).

    This is problematic because some of my games can't seem to find my old safe. Backups are in Documents > my games, but instead to find there as it should the games create a new folder 'My games' in the root directory of drive E, although I still have My Documents to save the location defined in its usual location on my primary C drive.

    So I think the problems are linked, and I can't understand why by clicking on "restore default settings" on the start menu > properties of Documents it would lead to the use of the root of my E drive as the location for all the files and folders "My Documents".

    I carefully edit the registry to make sure that this value is set correctly. Be sure to include the name of the final folder ('Documents') in the path. If you simply specify your user folder, all your documents will be dump it instead of inside the real documents folder.

Maybe you are looking for