Strange problem with the VMware Remote Console Plug-in

Similar Questions

• Of VMware Remote Console Plug-in Setup error: "unable to install the hcmon driver."

  Hi all

  I try to install the VMware Remote Console Plug-in for my browser of 32-bit Internet Explorer 11, and I get an error message during installation: "Unable to install the driver of hcmon."

  I have Windows 7 64 bit with .NET installed 4.5.5. Anything installed in my device manager, there is no hcmon.

  I use an x 86 install files to VRMC (VMware-vmrc-win32 - x 86 .exe), but I guess that this 32-bit version is what I want because I use THE 32-bit? Or is that what I want 64-bit for my OS?

  I've seen some posts related to this issue, but all my registry keys seem to be set correctly and my .NET is of course more recent than the version 3.5 SP1, but I hope it's OK.

  Also, I got an error on the USB in my Windows logs Arbitration Service, but following the steps described here, and retry the installation also failed with the same error 'hcmon' described above:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2043656

  Any ideas on what might occur, or other things I can try?

  Check if these KBs contributes to:

  http://KB.VMware.com/kb/2053281

  http://KB.VMware.com/kb/2006486

• Strange problems with the database

  Hello

  I just got my Fuze and am very happy with it; However, I am having a very strange problem with the database. I have a 16 GB sdhc card that I use with the "rocket" and there are about 4 songs on the card that will not play and have no information charge tag. Their tags appear in the tag browser (not the in the track information screen) as just an empty rectangle. Under the track information screen, sizes are listed as ~ 4000 mb. The songs will not play and I can not jump in front of one of these songs once they were loaded.

  At first, I suspected some kind of corruption of tag, so I set out that night to track down the problem. I removed the 16 GB card and reset the player. Then, I loaded one of the corrupt in the internal memory of the player. The track has been scanned and played correctly. Then, I removed the track of the internal memory and it loaded on another SDHC card. Yet once, everything worked correctly, so I knew that the card I was using was a kind of system files or physical problem. I returned the original 16 GB sdhc card in the reader and checked that the file was still unplayable, and then I plugged the "rocket" to my computer. I transferred the unplayable file on my computer and compared (with md5sum) to the original file, thinking that if there was the file system or physical corruption the copy of the map would be damaged. However, the files were equivalent.

  To make things even more interesting, I also have problems with the registration of the kind. I have some files tagged Genres such as 'Classic' and 'Rock '. In the list of the genre, I see this:

  C

  CL

  CLA

  CLAS

  Class

  Classic

  Classic

  Classica

  Classic

  Rock

  So, there is corruption on the kind of 'Classic' but not the kind of "Rock". Each of the substrings of 'Classic' contains only a few titles, with most of the other titles listed where they should be. I checked that the tracks are labeled correctly and in exactly the same way as the other tracks that do not have this problem.

  I am at a total loss about what to do, and I'd really appreciate any advice or suggestions. I use the current firmware, 2.03.31a and the songs in question are in Ogg Vorbis format.

  MM

  Thanks for your replies.

  I managed to find what may be the problem. Tracks that received corrupt tags had the names of total path with more than 256 characters. It seems that the driver internal fat32 the rocket uses vomits all over the place when the path name is too long. Before the "rocket", I got an iPod running rockbox tags with the same directory structure that I have on the "rocket", so I don't think that this restriction on the length of the path name is a limitation or requirement of the fat32 file system. Reduce the path corrected the problem with the files being unreadable.

  However, the problem with foires genres the rest. Looking at the files show that corruption, they all have a little information in tags. Most of the information is contained in the hashes I have files that identify them via musicbrainz. The limit on the total number of characters in the tags of the track includes the "rocket" label is not read or use?

  MM

• strange problem with the database link

  Hello world
  
  I have a strange problem with the link of database in Oracle 11 g Express Edition;
  There are two computers: computer-server and the client computer. Tnsnames.ora are the same on both computers IE.
  
  CT =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  )
  (CONNECT_DATA = (SERVICE_NAME = XE)
  )
  )
  
  I created the database link:
  
  Create database link zdalny
  Connect to < user_id > identified by < password >
  using "CT".
  
  Customer cannot connect with server when I do not use above the command. But when I change 'use' for using "krzysztof:1521" or by using "krzysztof" or "server IP:1521" - everything is ok.
  
  Why I ask. Because in all the materials that I read about Oracle command with the help of "CT" should work correct. But there is no. Do you know why?
  
  Thanks in advance and apologize me for my English.
  
  Rgds
  Krzysztof

  Here's the tnsnames of your server, but to connect to the oracle server db (any client or to another instance of db oracle), you must install oracle client.
  However, in your condition, you want to connect the DB1 Oracle OracleDB2 using a link db, I'm right? In this case you should always set the entry in the tnsnames.ora
  To verify that you can connect to Oracle DB2 from DB1 Oracle, you can use tnsping in the command line.
  In your case

  c:\tnsping CT
  

  Krzysztof Szymaniak wrote: CT =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )

  Check your tnsnames entry in the machine, you are trying to connect to. And check if the tnsping is successful.
  Sometimes the error message says not everything, which means that you need to troubleshoot yourself and learn from the experience.
  Always in the opposite case, refer to the documentation.

  See you soon.

  Published by: Spongebob December 14, 2011 09:30

• Strange problem with the formatting of the text

  Hello

  I had a strange problem with the formatting of the text. I created a document in Polish language and the strange thing happens when it divides the word to the next line. For example here on this part of the page, I have a word "umieszczamy", which should be divided "' u - CEF - szcza - my", but my Indesign divides in umi-eszczamy (as shown on the picture). " How can I fix it so it divides the word correctly?

  Concerning

  

  What language is awarded when you select the text? Hyphenation, but also the spelling, is controlled by the dictionary that is assigned to the text.

  If the language is correct, you might have to change the hyphenation in the user dictionary.

• Problems with the VMware vSphere Client

  Hallo

  I have problems with the new Client VMware vSphere.

  Until I installed the new client on my system, I had the old VMware inferstructure 2.5 client to manage my esxi.

  I was then going to test esx 4 box of the anther and then installed the vsphere client.

  But!

  When I try to connect my old esxi 3.5 or the new esx 4 I get the following error from the vsphere client:

  "Analysis of the server"192.168.2.2"" clients.xml"file error.

  Logon will continue, contact your system administrator.

  I then clik Ok and get this message:

  The initializer for type for 'VirtualInfrastructure.Utils.HttpWebRequestProxy' threw an exception.

  I tried to delete the old client and the new and then install the new, but still it dosent work.

  I am running Windows 7 64 bit.

  It will not work on windows 7, period.  You must run the VIC from a supported operating system

• Strange problem with the keyboard event listener

  I have a full screen touch app. To close the application, I set an event listener on keyboard for the key "0". I don't want the press user due to some restrictions Alt + F4 key combination. Problems begin when the application loses focus. Here's the code;

  protected function onComplete(event:FlexEvent):void
  {

  this.setFocus ();
  this.addEventListener (KeyboardEvent.KEY_DOWN, trapKeys, true, 0, true);

  }

  private void trapKeys(e:KeyboardEvent):void {}
  
  If (e.keyCode == 96) {}
  This.Close ();
  }
  
  Else if (e.keyCode == 48) {}
  This.Close ();
  }
  
  }

  When the user change the screen to a different with Alt + TAB application, or any other combination of keys flex app loses focus and does not work when he turns back to my app "0". How can I solve this problem?

  Thanks in advance.

  Hi, Ahmed.

  I have absolutely no problem with the solution you are trying to set up - you use mode full-screen interactive mode of keyboard?

  Please consider:

  on full add keyboard listener

  protected function applicationCompleteHandler(event:FlexEvent):void

  {

  this.stage.addEventListener (KeyboardEvent.KEY_DOWN, trapKeys);

  };

  //

  protected function applicationActivateHandler(event:AIREvent):void

  {

  If (this.stage)

  {

  switch the State to display full-screen when activated

  If (this.stage.displayState! = StageDisplayState.FULL_SCREEN_INTERACTIVE)

  {

  this.stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;

  };

  };

  };

  //

  private var exitHandled:Boolean = false;

  on NUMBER_0 | NUMPAD_0 exit-close

  protected function trapKeys(event:KeyboardEvent):void

  {

  If ((event.keyCode is Keyboard.NUMBER_0

  || event.keyCode is Keyboard.NUMPAD_0)

  (& this.exitHandled == false)

  {

  exitHandled = true;

  this.stage.removeEventListener (KeyboardEvent.KEY_DOWN, trapKeys);

  This.Close ();

  };

  }

  (Note: applicaton of the events 'applicatonComplete' and "applicationActivate" are routed to over managers)

  Kind regards

  Peter

• Strange problem with the license...

  Hi all!

  I have a very strange problem and I got nowhere with navigation on all ads in this forum. My environment is as follows:

  An ESX 3.5 update 3 Server with 2 cards integrated network interface and two Intel Quad Port cards VT. I put the on board to be the port of the console and the other on board to be the network of Virtual Machines. Here are the two separate networks, separated by a Cisco firewall. The IP of the console is 10.10.10.10 and virtual machines are on a network of 172.16.10.x. I also have a VC (physical) server with network cards two, one on the 10.10.10.x network and the other network 172.16.10.x. I installed the license server on the VC, and she won the 172.16.10.x listening address (although I discovered he will listen on the network 10.x.x.x). Then I edited the file hosts on the ESX Server to include the VC server using a name resolution. I ping the name/address of the server successfully. I also have my firewall configured to allow all traffic between two networks (as long as the traffic is initiated by the 10.10.10.x network). I cannot see any errors or not on the firewall.

  The strange thing is that I am able to the ESX by VC license but it stays there for a little while and then loses the configuration. Then, I try to do it again without success. I point to the assessment option and it works again. I then point to the license server and takes it. I can do the same thing on the ESX itself with similar results. I tried to use the name of host or IP address; exact same results. The error simply indicates that the server could not find the license server.

  The really strange thing is that even when the server is authorized, any action I do on the server (configuration, start and stop VMs, etc) is extermely slow and some of them simply because of time.

  Did anyone have clues here? I'm lost...

  Thank you in advance. ?:|

  Tom

  Hi BDHHI.

  Do not know if she could solve your problems but... According to what you say, the license server becomes the 172... interface as the default interface. Go to network connections-> Advanced Options-> advanced settings and make sure that the interface with 10.10 IP... is on top, services will have this default IP address.

  On which network will be launching connection, maybe I'm wrong, but that it could be open in both directions.

  Kind regards

  AlexNG

• Strange problem with the new ca and on Satellite M45 mouse adapter

  Hello

  Recently, my adapter had problem with load the laptop (model M45-S2692), so I bought another card. The new adapter has worked for a few months and now its behave differently.

  If I plug the adapter into the laptop, the mouse does not work and works otherwise.

  Does anyone have an idea on what could be the problem.

  Please advise.

  Concerning
  Suri

  Hey Buddy,

  Therefore, may I ask if the adapter that was purchased is an original toshiba AC adapter? Why didn t contact you a servicepartner, since they had probably had your sector-free adapter because you have something called guaranteed.

  How Don t you know the adapter you have, there where he knows do not so it s original or not, do not damage anything on your motherboard for your machine.
  Maybe it has nothing to do with your power adapter...

  I would appreciate comments on your part just a small one description which CA is, when you bought your machine and if the error could be reproduced with the removal of the AC.

  Welcome them

• Satellite L850 - 1 H 4 - a strange problem with the FN key

  Hello

  I have a strange problem on my laptop. When I uninstall my PVAT my start "FN" key works, when I install it it s not working not properly. Its market not only the volume key (F9 and F10) without pressing the "Fn", if I want to press F9 or F10 I have to press FN + F9, even with the rest of the buttons.

  When I install PVAT I have to press FN, so I can use my F keys (e.g. F3 to search on the browser tool, alt + f4 - I have to press Fn + alt + f4), and I can't use real functions like mute, disable Touchpad etc. Use the volume keys only. Y at - it a problem if I run my computer without PVAT, this may affect its performance?

  Where could be the problem and can I fix it? I'm with Windows7 x 64, but the laptop was with no OS when I bought it. And there is a problem with this version, I bought its impossible to install the Pakc3 Service, it s with SP1, can be the problem? I put t know what to do... perhaps I run the laptop without PVAT, sounds good, because the buttons work fine without it, but I don't know if it interacts with something else.

  Thanks in advance!

  Its possible to use the function buttons by pressing another button without the use of the fn or FN.
  This option can be changed in the BIOS.

  Go to the BIOS by pressing F2.
  In the BIOS, choose Advanced-> system configuration Options
  Here you should find the option that allows to change the special function keys which allows you to use the function FN or without button Fn button

  By the way: this theme has already spoken here in the forum several times. therefore recommend that you use the advanced search to Forums before posting new thread

• Strange problem with the KING and IMAQ find right 3 edges

  So first of all, I noticed that the KING produced by KING features seems to have an incompatibility with the entrance to find right IMAQ 3 edges:

  

  In my code, I have the strange problem "IMAQ find right edges 3" is the production of edges that lie outside the limits by the wired KING specifided: "."

  

  In this case, a return on investment, defined by a rectangle, I [476, 1559, 752, 1779], but the best line produced by VI shape is outside this rectangle (see ordered 1876).

  How is that possible?

  I finally thought to it - it was my fault. I was updating the global rectangle in the KING entered correctly, but not the contours.

  I fixed the wiring and now it works fine.

  Detective Conan!

  G

• Solution of problems with the vmware window

  Using VMWare Workstation 7.0.1 and windows xp SP3 professional home, the resolution of the screen always changes to adapt to the vmware window. I especially run it in full-screen, exclusive mode, but sometimes I have to go to restored state. When I do, the vmware window must shrink to fit on my screen (which it doesn't) and the resolution of the virtual machine running is currently expected to remain the same for he puts just scroll bars on the edges. What is happening is that the resolution always goes down to 800 x 600 bottom of 1440 x 900 and its really annoying. Mostly because all the desktop icons move upward in the upper left corner when I change the resolution back to the larger size.

  I'm sure it's a problem in vmware itself because I tried to uninstall vmware tools of virtual pc and with that was the graphics card driver. Surprisingly, when I rebooted the virtual pc, it installed most of the pilots who were going with vmware tools except for the screen and it goes not smaller when I'm out of the mode full-screen. After that, I reinstalled tools and he did the same thing again. I'm pretty sure I should keep vmware tools, so I don't want to leave just UN-installed.

  Are there specific parameters associated with the change in resolution to fit the window? Ive looked around and ive seen settings do not really match what I want.

  AutoFit window resizes the window to match the guest.

  AutoFit Guest resizes the guest to match the window.

  (This is explained in the preferences > display page.)

  If both are true, we will resize the window when the customer changes his resolution internally, but we will resize the comments when you explicitly resize the window of VMware Workstation.

• Strange problem with the keyboard

  Hello.
  I have problem with my keyboard. It works with delays. I don't know how to fix it.

  Hello

  What do you mean by working with delays?
  As far as I know, you can change the keyboard settings in the keyboard properties.
  Also, if you think that it s not a fault or parameters of software problem but hardware malfunction, you can try to contact the service agent.
  But before you contact the ASP you should recover the operating system.

  Good bye

• Strange problem with the default location of Documents

  I have recently reinstalled Windows after a hard disk failure. Fortunately, I had previously moved the library of 'My Documents' to a secondary drive, so I don't lose anything. Merge all records (i.e. move the new default library to merge with the library on my secondary drive) seemed to cause some problems with some file search programs, then my new primary drive being much bigger than my old one that I decided just to move the library of My Documents from my drive C (the OS partition).

  Here's the weird part: under start > Documents (right click) > properties, I have the save location set to C:\Users\MyName, which (I think) is normally by default when you install Windows. But if I click on "restore defaults", it switches to the root of one of my secondary drives (drive E).

  This is problematic because some of my games can't seem to find my old safe. Backups are in Documents > my games, but instead to find there as it should the games create a new folder 'My games' in the root directory of drive E, although I still have My Documents to save the location defined in its usual location on my primary C drive.

  So I think the problems are linked, and I can't understand why by clicking on "restore default settings" on the start menu > properties of Documents it would lead to the use of the root of my E drive as the location for all the files and folders "My Documents".

  I carefully edit the registry to make sure that this value is set correctly. Be sure to include the name of the final folder ('Documents') in the path. If you simply specify your user folder, all your documents will be dump it instead of inside the real documents folder.

  

• Strange problem with the loading of the page.

  Hello everyone.  First of all, I am a newbie.  Recently, I decided it was time to refresh my site, which was built using Frontpage, and with the recommendation of a friend, I bought DW CS4.  I look for many tutorials in recent weeks and still feel I have only scratched the surface of the posibilities of DW.  I'm kinda learning as I go and I have a feeling, when I get my site to the top and run I will build another.

  Now that I have that out of the way I started with a template and changed it a bit to account for what I'm doing.  However I came across a small question, well I think that is a problem and its driving me crazy.  When the page load the style is in every sense and jump together.  Is this normal?

  Here is the link: http://www.profleetsales.com/order_guides.php

  What is happening just above the tabs Spry menu.

  Normal?

  This is the great (heavy) or the images on it that give it weight.  From of ovefr would not change cela.