Strange question by using a layer to key as hidden by approach

Similar Questions

• strange question use stop() to control a scenario after loadClip

  Hello, I have this strange question:

  I want to control the scenario of a swf file loaded with loadClip command.

  I wrote this code

  var loader: MovieClipLoader = new MovieClipLoader();

  loader.addListener (this);

  function onLoadComplete(_mc:MovieClip) {}

  _mc. Play()

  };

  loader.loadClip (swfname, _root.holder)

  function pause() {}

  _root.holder.stop)

  }

  function pause a button is used to stop playback of the loaded movieclip.

  strange thing is that stop() works when you test the movie by the flash application and plays from the projector. It DOES NOT WORK when he runs by embed code html in swf or swf directly.

  I checked a lot of time and the name of the 'container' is resolved, but the command does not work for his screenplay.

  thanx for help

  Daniele

  you wouldn't expect this stop() never work.  Once the loading starts, stop() no longer applies to the target of a loadClip (or loadMovie) method.

  to resolve, use the stop() on the first frame of the loaded swf file editing.

• Windows XP Home edition has crashed - how to return WXP and use with the product key?

  Hello. I bought an Equium L20 last year and after 1 year my windows crashed due to a virus. I want to know how to get a real windows xp OS because the product under my laptop key is always saved for me and is a legitimate product but I can't get windows because it was obviously preinstalled and no CD was given to me with the package.

  How can I get back Windows to use with my product key on my WIN sticker below my laptop.

  Hello

  First of all, it is very strange that recovery CD is not delivered with your laptop. It's hard to believe, but anything is possible. As you know after buying a new product, it is very important to check all orders sent with it and if something is missing, you must call the local as soon as possible and not to wait a year.

  Sorry but this key code belongs to original recovery image and you can't use it with every installation of Windows XP Home edition CD. In your case, there are two options:
  -You can buy the CD of facilities Microsoft original WXP (with the key correctly code) or
  -Contact the partner of service allowed in your country and order the new CD from recovery for your laptop model.

  All that s!

  Bye and good luck!

• Satellite A210 - 11 p point of freezing by using the FN + F5 key - how to remove the VAP

  Hello

  I had a problem with my A210 - 11 p gel when I use the f5 function key to switch between the LCD and the tv.
  I read other posts and people talk about updating the value Pack.

  I downloaded it but it tells me to uninstall the old version by using Add or remove from the control panel.
  But the added value pack is not listed here. I thought that I would try to remove the utility Flash Cards, but that did not help and I had to install the 64-bit driver to get them back because once they have been removed I couldn't use the function keys!

  Flash cards are back so the 64-bit driver seems to work, but I think I have a 32-bit of Windows Vista.

  The other reason that I was updating the value Pack is that when I go to the TV and LCD, flash cards are not displayed and I have to use the f5 function and it is when the computer crashes.

  So, how can I uninstall the old VAP?
  Where he's hiding?

  Someone eles suffer this?

  And how do I know if I use 32-bit or 64?
  Sorry for the string of questions

  Thank you

  Mickey

  Hello

  Perhaps I should clarify that;

  First and foremost your laptop must belong to the PSAELE series.
  If you are not sure, check the bottom of the unit.

  The VAP may be withdrawn from Vista in Control Panel-> programs & features

  On my laptop A210 the PPV could be found at the end of the list of installed programs.
  I could easily remove it. But note that I used the Vista 32 bit.

  The VAP for _Vista 64bit_ is not available!
  On the European disc of Toshiba, you will only find programs simple but * not full * VAP package!

  I think it's the reasons why you don t see the PPV and cannot be removed.

  concerning

• Buy server windows 2008 32 if I download the 64-bit and use the 32-bit key original that it will work?

  Buy server windows 2008 32 if I download the 64-bit and use the 32-bit key original that it will work?

  Hi George,.

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope that helps!

• Strange question, craps remaining after the system recovery on my windows xp desktop.

  Strange question, thank you for your comments!

  I just reinstalled windows xp on my old HP desktop HP Pavilion Media Center TV m7334n PC computer using the recovery on D partition. I expect that the installation would be a clean install. At the beginning of the recovery, I noticed the message on the screen saying that the backup was in process. After recovery, I could start my computer and realized that used disk space C was still as the space of C drive used before the restoration. I also noticed that there was a lot of pre-installed programs appears on the list of start - all programs. I never installed them after recovery. Many of them work. I expect a CLEAN installation. It is not clean at all.

  Furthur inspection on the system to reveal problems:

  1. I noticed that there are so many records under the program folder program files on the C drive (I have only one program fichiersDossier). I guess that the recovery process copied evething under my original forder of program files in this folder. I don't have anything I can use most of them because the links were scattered on a large number of them (I can't run the program of either start - all programs or folder directly). Is not at all a CLEAN installation.

  2. the recovery process also copy my document in the folder as well original user, see below to understand which is the original file of the user.

  3. originally, in my computer, I have two users (or 3 including comments), we came to HP-administrator with the computer, is another family.  On the computer I just recover, there are 3 users accompanying the recovery. They are administrator, hp-administrator and guest. I've renamed the family administrator. Now, under systems and settings, I see the user plus two records. They are administrator-YOUR-4DACD0EA75 and hp-administrator-YOUR-4DACD0EA75. YOUR 4DACD0EA75 sounds familiar. I can remember that I was lazy and that it has not changed the computer name during installation after recovery. YOUR 4DACD0EA75 is actually the default name given to me during the installation. I don't like this at all, so I changed the name of the computer and restarted the computer. The name of the computer was changed after the restartup, but ugly folder names remain the same and I can not even rename the ugly file name.

  I had done some restorations system on this computer before, I never noticed a problem like this before.

  1 have we seen this before?

  2 I forgot something?

  3. can I safely delete the original user profiles and records under the program folder program files?

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant.

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks?

  Thanks for reading my long message!

  1 have we seen this before? I saw something similar and other relief to be fixed.

  2 I forgot something? I don't think so. Just do an another hard drive recovery. Try again is all I can think about.

  3. can I safely delete the original user profiles and records under the program folder program files? I would'nt mess with her. Just do another hard drive recovery system.

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant. Yes. Used hydrogen peroxide call destructive (or full) non-destructive vs. Make a full - restoration destructive to put things o back the way you bought it.

  http://support.HP.com/us-en/document/bph07145

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks? By all means, out juice of repair disk and try to get it back. If you can repair the disk, make a copy or 2 whole and store them in a safe place. Otherwise, you will have to order them from somewhere on the Web... as a popular auction site.

  Thanks for reading my long message! You are welcome. Thanks for posting. I hope my answer helps.

• Questions (MS Sculpt Ergo) keyboard: Windows key, Double letters

  I was using an ergonomic keyboard Sculpt Microsoft and mouse for a few months now on Windows 7 running on my computer (iMac in Bootcamp) with no problems until yesterday.  I brought to the top of the keyboard on the screen and the issues I found are the following:

  1. the windows key often seems to be pressed (always with the two shift keys), leading to questions disappearing actually press the Windows key (but refer to chance).

  2. often, while typing some letters will appear twice, it seems that some letters (e, t, h) more than others, but I can't say for sure.

  3. the above questions also shows where I could type a word (for example the combination) and it doubles as a series of letters (ex: combinatioion) or add a letter I typed just after the space I typed (ex: where e).

  4. certain combinations of letter/key (SHIFT + V) do not work, so I can't type a capital "v" without using the on screen keyboard.

  I tried the following things to resolve this, so far without success:

  A. replacement of the batteries in the keyboard.

  B. restart the computer.

  C. blow off dust keys of (the room was clean and did not have whatever it is spilled on it).

  D. removing the Windows and verification key to remove the dirt or anything that might be the cause to push.

  I would appreciate any input, the keyboard is new enough, I can see to have replace if necessary, but I thought I'd check and see if anyone had ideas of software/driver to try first.

  Hello Joe,

  Thanks for posting your query in Microsoft Community.

  I understand you have questions using the keyboard you have made recently. We appreciate the efforts that you have taken to solve the problem, we are happy to help you in the matter of fixing.

  You can try to follow the suggestions mentioned in the link below to solve the problem with the keyboard.

  Troubleshoot wired keyboards that do not or only the erroneous characters category

  http://support.Microsoft.com/kb/258826/en-us

  Additional information:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab04

  I hope it works for you. Otherwise, feel free to write us back for assistance.

• Strange question - width ListItem

  While developing applications, I noticed a strange question.

  When I draw list in qml item available, it's very nice on an excerpt:

  I put

  horizontalAlignment: HorizontalAlignment.Fill
  

  and the width of the list item fill all empty space, but when I check the list on Simulator it encapsulates the width of content?

  Does anyone know how to set the width of the listItem to fill all the space from left to right?

  To sum up,

  I want to have (and it looks like this on qml overview):

  

  but I get this (width of list point fits only the content):

  

  Thanks in advance.

  Hi, there may be simpler but for me it works using the spaceQuota:

  ListItemComponent {
      type: "item"
      Container {
  
          background: Color.Red
          Container {
              preferredHeight: 230     
  
              layout: StackLayout {
                  orientation: LayoutOrientation.LeftToRight
              }
  
              Container {
  
                  layoutProperties: StackLayoutProperties {
                      spaceQuota: 1
                  }
               }
           }
       }
  }
  

• generate a numerical value to use as the primary key

  Can someone correct me, in an interview that the question was asked.

  How not one generates a numeric value to use as the primary key?

  Years

  We can get it using the sequence. For example:

  CREATE SEQUENCE cust_seq

  START BY
  1000

  INCREMENT OF
  1

  NOCACHE

  NOCYCLE;

  Hi Shu,

  sequence would be my choice and 12 c new type called identity.

• Strange question - data double on table 12 c JDev

  Hello

  I have a strange question in my table. I use Oracle JDeveloper 12 c. In my page, I use 2 VO and a secondary has a problem with the display of data - it displays two times. Heard that I deleted the table and put it in my page and always the same problem.

  No matter if I have all the data to my record in the table primary or not, when there are data to display then it shows twice. I do not know it can help, but for more information table is located in the popup.

  Anyone have this problem?

  Kind regards

  WK

  You must specify exact jdev version (there are two versions of 12 c)

  I had this problem in 12.1.2(a il y a longtemps, et à cause de trop de bugs dans cette version je n'a pas pris la peine de trouver la raison), but it seems that this problem went to 12.1.3(at moins, pour mon application)

  Dario

• This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switchi

  This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switching autour.

  If you have symbols of button on the stage to the next and previous, each of these symbols has an instance name with a listener event attached to it. The event listener is linked to a mandate. You can have a single event point to a function. So for example, if you have a next button and a click event that points to a function that says something like nextFrame(); and then you want to use the next button to point to a function that says something like nextScene(); you will need to use another instance of this next button and have this different instance to use a different event handler to point to a different function. Who help me?

• Change all paths in a layer without using a layer appearance attribute

  I suspect I did it wrong for a while, but I don't know how to do it right.

  If I want to change the appearance of all paths in a layer (say, something simple to change their line color), it is pretty easy to target in the layer by clicking on the button of the target layer. However, when I do change (as outline in orange color setting), it appears in the appearance of the layer itself - each element within the layer are not orange line directly in their appearance attributes, they just inherit the appearance of the layer attributes.

  I understand that this is the intended behavior, but I found that it's easier for me to avoid the layer effects and have just each element in a layer to be autonomous and show all its own attributes of appearance without something inheriting from the upper layer (I tend to forget and be confused about when they appear). However, I don't know how to force the appearance of a layer down to its subcomponents (likely the compensation of the appearance of the layer to avoid duplication). Is it some commands I'm missing?

  Now how I do it, it's all in the layer by using the layer target, then UN-target target the highest member of the layer. This allows me to change the appearance of all items in the layer (except the one at the top) without changing the appearance of the layer itself. Then I do the top separately. Seems kludgier than she should be. Any help? Thank you.

  tqrtuomo, I was confused by the present, sometimes as well and made the same thing you describe. I think the key, when selecting on a given layer or group is to click on the 'right' of the 'Target' button in the layers panel to the layer/group level. Make sure that there is no 'circle' around the target button or appearance will be assigned to the layer/group.

• Strange question USB CPU intense operations...

  So I was hitting this strange question lately with my R4 Aurora...

  During an intense application or game, the power of my keyboard & mouse will start go on and outside... fan start office turns up and down at the same time. The computer will continue to function, but as the USB power goes on and outside, I can't use the keyboard to stop. I can hit the power button on the computer and usually it stops just fine.

  Could be that your diet is more stressed.

  If you connect a USB2 Hub supplied with 50W power brick, what happens?

• Using the layer style, mix if it doesn't work

  I use the layer style, if mix GREEN mode and he abandoned all colors.  Why is this happening?  The photo is a RGB 8 bit jpg.  When I select any color or grayscale it takes all colors.  I'm doing something wrong?

  I followed the instructions by training from Lynda.com on Photoshop CS4.  The instructor took a sky background.  The only difference is that I am trying to remove the green of the trees in the background so that I can bring other photos to the background image.

  Thanks in advance.

  Oops

  Not a bug. The color range tool, remembers the last setting even after outgoing PS and he raises. Because this setting can be from a completely different image, unconnected with, the memory can be disconcerting to a user unfamiliar with this tool.

  Just ignore the displayed initial selection and start highlighting the left of the three eyedroppers and click in the image on a color you want to select. Twist the blur to expand or reduce the range of color affected. Switch to pipettes middle or right and click a different tone of color linked to add or subtract from the original selection.

  Optionally, you can choose to stay with the eyedropper on the left and press SHIFT or Alt keys while clicking on the image to add or subtract.

  For what you are trying to do it on the specific image you presented, you won't find the satisfactory color range tool.

• If the hard disk dies this affect router/WiFi?  I know that this seems to be a strange question.

  If the internal hard drive dies this affect router/WiFi?  I know that this seems to be a strange question.  Logically, they seems to be two independent functions.  However, since I do not understand how it works...

  I plan to spend my old airport extreme (about 7 years) at an airport new Time Capsule or Airport Extreme for better wi - fi range.

  Where the internal hard disk come into your Airport Extreme or Time Capsule dying airport upgrade?

  If the disc is dead, it will be not not to be replaced. This should be done first before to other devices.