Strange question on Satelite R830-1GZ
Owner for two weeks. Everything worked well, but today I had a strange thing happen
I was connected to a Wi - Fi modem. Then I disconnected the modem and signed in btfon.
After that, I noticed Skype contacts were not connected, so I have closed Skype. I then immediately open Skype. Before you have time to charge that a blue screen appeared and windows must close.
So I was surfing when this happened. When I rebooted, it did this automatically, all load fine... but Skype charged only to the extent where my user name, that is to say, I had to re enter password, I have never had to do before. This would be a matter of Skype?
I am terrified, as I just finished an acer that blue screened at the drop of a hat which treats. This happened only today once. I put the laptop under extreme pressure up to now and not a murmer, it may be just a stop?
Skype works fine and usual railway accidents (chrome) nothing untoward happened. Brightening laptop, wow
Hello
BSOD is a hardware or software problem.
I got a BSOD from time to time, but in my case it was a software problem, the system has been altered and I installed it again this improved my performance.
I guess you could start Notepad correctly and Skype working properly too right?
Well, maybe it was a problem of temporal software who knows but similar Skype problem happened to me after installing the new version of Skype, I assume that the necessary sound to you connect again using the Skype password after these major updates
Tags: Toshiba
Similar Questions
-
I have a new R830-1GZ Satellite with Windows 7 and a (much) older Portege M300 - all have two versions of Radar on them.
However, while the old machine display correctly anywhere wireless and signal forces - even when there are multiple places with the same SSID - I use Powerline Extenders to extend coverage, the new machine with the last RADAR doesn't seem to be able to cope with these multiple identical wireless spots and fails to show more than one at a time - and then reliably.
I should add that both machines work quite well in fact using the same SSID points connecting to the stronger.
Is there a utility round way this or another that correctly displays it available different SSID and strength.
Thank you very much
Bill
> Is there a utility round way this or another that correctly displays it available different SSID and strength?
As far as I know there is no other Toshiba utility that could manage wireless networks and display devices Bluetooth as ConfigFree don't.
I found some useful Q / A ConfigFree regarding:
[ConfigFree: answers Questions &: http://www.toshiba.eu/innovation/solution_content_article.jsp?z=42&SOLUTION_ID=Conf igFree_QandA]Look also in Toshiba's technical knowledge base and search for Configfree for useful documents.
http://www.Toshiba.EU/innovation/generic/TKB_SUPPORT/ -
Hi all
The CPU usage of my laptop shoots upward to 25% (and beyond) and increases in fan speed considerably after waking up, but only when I use an external mouse (Microsoft Natural Wireless Laser Mouse 6000) - disconnect the mouse once it happened does not solve the problem, so I always have to restart my computer if I let go sleep with the connected mouse.
I noticed that when this produces the system interrupts - delayed appeals procedure and Interrupt Service routine appears in the resource monitor > CPU > process and seems to explain the increase in the use of the processor.
Any ideas on how to solve this problem would be most appreciated.
I use a Toshiba Satellite R830 1GZ with Windows 7 (64-bit). This problem will not occur when I use the same mouse with another laptop (Dell with Windows XP).
Thank you very much.
CM> The CPU usage of my laptop shoots upward to 25% (and beyond) and increases in fan speed considerably after waking up, but only when I use an external mouse (Microsoft Natural Wireless Laser Mouse 6000) - disconnect the mouse once it happened does not solve the problem, so I always have to restart my computer if I let go sleep with the connected mouse.
I think that the process that controls the mouse MS WLan does not close properly.
The system to memorize it and therefore the cooling module begins to spin faster because these processes stressed the central unit.Maybe its caused by the mouse driver
Have you checked if there is an update to the driver? -
If the internal hard drive dies this affect router/WiFi? I know that this seems to be a strange question. Logically, they seems to be two independent functions. However, since I do not understand how it works...
I plan to spend my old airport extreme (about 7 years) at an airport new Time Capsule or Airport Extreme for better wi - fi range.
Where the internal hard disk come into your Airport Extreme or Time Capsule dying airport upgrade?
If the disc is dead, it will be not not to be replaced. This should be done first before to other devices.
-
Strange question, craps remaining after the system recovery on my windows xp desktop.
Strange question, thank you for your comments!
I just reinstalled windows xp on my old HP desktop HP Pavilion Media Center TV m7334n PC computer using the recovery on D partition. I expect that the installation would be a clean install. At the beginning of the recovery, I noticed the message on the screen saying that the backup was in process. After recovery, I could start my computer and realized that used disk space C was still as the space of C drive used before the restoration. I also noticed that there was a lot of pre-installed programs appears on the list of start - all programs. I never installed them after recovery. Many of them work. I expect a CLEAN installation. It is not clean at all.
Furthur inspection on the system to reveal problems:
1. I noticed that there are so many records under the program folder program files on the C drive (I have only one program fichiersDossier). I guess that the recovery process copied evething under my original forder of program files in this folder. I don't have anything I can use most of them because the links were scattered on a large number of them (I can't run the program of either start - all programs or folder directly). Is not at all a CLEAN installation.
2. the recovery process also copy my document in the folder as well original user, see below to understand which is the original file of the user.
3. originally, in my computer, I have two users (or 3 including comments), we came to HP-administrator with the computer, is another family. On the computer I just recover, there are 3 users accompanying the recovery. They are administrator, hp-administrator and guest. I've renamed the family administrator. Now, under systems and settings, I see the user plus two records. They are administrator-YOUR-4DACD0EA75 and hp-administrator-YOUR-4DACD0EA75. YOUR 4DACD0EA75 sounds familiar. I can remember that I was lazy and that it has not changed the computer name during installation after recovery. YOUR 4DACD0EA75 is actually the default name given to me during the installation. I don't like this at all, so I changed the name of the computer and restarted the computer. The name of the computer was changed after the restartup, but ugly folder names remain the same and I can not even rename the ugly file name.
I had done some restorations system on this computer before, I never noticed a problem like this before.
1 have we seen this before?
2 I forgot something?
3. can I safely delete the original user profiles and records under the program folder program files?
4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant.
5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks?
Thanks for reading my long message!
1 have we seen this before? I saw something similar and other relief to be fixed.
2 I forgot something? I don't think so. Just do an another hard drive recovery. Try again is all I can think about.
3. can I safely delete the original user profiles and records under the program folder program files? I would'nt mess with her. Just do another hard drive recovery system.
4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant. Yes. Used hydrogen peroxide call destructive (or full) non-destructive vs. Make a full - restoration destructive to put things o back the way you bought it.
http://support.HP.com/us-en/document/bph07145
5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks? By all means, out juice of repair disk and try to get it back. If you can repair the disk, make a copy or 2 whole and store them in a safe place. Otherwise, you will have to order them from somewhere on the Web... as a popular auction site.
Thanks for reading my long message! You are welcome. Thanks for posting. I hope my answer helps.
-
Strange question - width ListItem
While developing applications, I noticed a strange question.
When I draw list in qml item available, it's very nice on an excerpt:
I put
horizontalAlignment: HorizontalAlignment.Fill
and the width of the list item fill all empty space, but when I check the list on Simulator it encapsulates the width of content?
Does anyone know how to set the width of the listItem to fill all the space from left to right?
To sum up,
I want to have (and it looks like this on qml overview):
but I get this (width of list point fits only the content):
Thanks in advance.
Hi, there may be simpler but for me it works using the spaceQuota:
ListItemComponent { type: "item" Container { background: Color.Red Container { preferredHeight: 230 layout: StackLayout { orientation: LayoutOrientation.LeftToRight } Container { layoutProperties: StackLayoutProperties { spaceQuota: 1 } } } } }
-
Strange question - data double on table 12 c JDev
Hello
I have a strange question in my table. I use Oracle JDeveloper 12 c. In my page, I use 2 VO and a secondary has a problem with the display of data - it displays two times. Heard that I deleted the table and put it in my page and always the same problem.
No matter if I have all the data to my record in the table primary or not, when there are data to display then it shows twice. I do not know it can help, but for more information table is located in the popup.
Anyone have this problem?
Kind regards
WK
You must specify exact jdev version (there are two versions of 12 c)
I had this problem in 12.1.2(a il y a longtemps, et à cause de trop de bugs dans cette version je n'a pas pris la peine de trouver la raison), but it seems that this problem went to 12.1.3(at moins, pour mon application)
Dario
-
This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switching autour.
If you have symbols of button on the stage to the next and previous, each of these symbols has an instance name with a listener event attached to it. The event listener is linked to a mandate. You can have a single event point to a function. So for example, if you have a next button and a click event that points to a function that says something like nextFrame(); and then you want to use the next button to point to a function that says something like nextScene(); you will need to use another instance of this next button and have this different instance to use a different event handler to point to a different function. Who help me?
-
Strange question USB CPU intense operations...
So I was hitting this strange question lately with my R4 Aurora...
During an intense application or game, the power of my keyboard & mouse will start go on and outside... fan start office turns up and down at the same time. The computer will continue to function, but as the USB power goes on and outside, I can't use the keyboard to stop. I can hit the power button on the computer and usually it stops just fine.
Could be that your diet is more stressed.
If you connect a USB2 Hub supplied with 50W power brick, what happens?
-
strange question use stop() to control a scenario after loadClip
Hello, I have this strange question:
I want to control the scenario of a swf file loaded with loadClip command.
I wrote this code
var loader: MovieClipLoader = new MovieClipLoader();
loader.addListener (this);
function onLoadComplete(_mc:MovieClip) {}
_mc. Play()
};
loader.loadClip (swfname, _root.holder)
function pause() {}
_root.holder.stop)
}
function pause a button is used to stop playback of the loaded movieclip.
strange thing is that stop() works when you test the movie by the flash application and plays from the projector. It DOES NOT WORK when he runs by embed code html in swf or swf directly.
I checked a lot of time and the name of the 'container' is resolved, but the command does not work for his screenplay.
thanx for help
Daniele
you wouldn't expect this stop() never work. Once the loading starts, stop() no longer applies to the target of a loadClip (or loadMovie) method.
to resolve, use the stop() on the first frame of the loaded swf file editing.
-
Strange question: How do new dimensions go upwards, not downwards?
Hey, I have a strange question. When I change the dimensions on a document and for example make it bigger, the bottom becomes higher in the direction down. But... How can I get, if you know what I mean? When I do the larger dimensions, why he cant increase upward?
Does anyone know how to do this?
The dimensioning of the scene is based on the top left corner, any change in the size will be push to the right or down. You can't change what I know.
-
strange question by inserting the data...
Hi everone,
I have a strange question. I'm not looking I do something wrong or is this a bug?
I do a simple ' insert into table (select statement). Everything is ok... It's inclusion. But when I run the
"select statement" separately (actual data I need to insert), I get different data inserted in the table.
-> I have observed something else where there is a "case statement" in the selection m than the data in the table are spoil...
EX:
SELECT TRIM (member_span.member_nbr) member_nbr-> this one I see the correct data
(
CASE
WHEN SUBSTR (member.member_nbr, 10, 2) = '00' THEN TRIM (member.member_nbr)
Of OTHER SUBSTR (member.member_nbr, 1, 9). '00'
END Subsciber_nbr),-> This data are spoil seeing incorrect data in the table...
Database version:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bi
PL/SQL Release 10.2.0.2.0 - Production
"CORE 10.2.0.2.0 Production."
AMT for HP - UX: release 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - Production
< b > "" "did exactly the same thing in a different database. I don't have any problems out there"" "I'm getting problem only with this database < /b >"
Anyone know a bug related to this problem?
Please help me with this question...INSERT INTO member_load(member_nbr, subscriber, ymdbirth, security_group, group_nbr, network_id, cob_date) (SELECT TRIM(member_span.member_nbr) member_nbr, ( CASE WHEN SUBSTR(member.member_nbr, 10, 2) = '00' THEN TRIM(member.member_nbr) ELSE SUBSTR(member.member_nbr, 1, 9) || '00' END) subsciber_nbr, ( CASE WHEN LENGTH(member.ymdbirth) = 8 THEN member.ymdbirth ELSE NULL END) dob, ( CASE WHEN TRIM(member_span.group_nbr) IN('108076', '108077', '108078', '108079', '108080', '108081') THEN 'E' WHEN TRIM(member_span.group_nbr) IN('107001') THEN 'M' WHEN TRIM(member_span.group_nbr) IN('107005') THEN 'J' ELSE 'A' END) security_grp, TRIM(member_span.group_nbr), ( CASE WHEN TRIM(member_span.business_unit) = '01' THEN 'N' || TRIM(member_span.business_unit) || '-' || TRIM(member_span.prog_nbr) WHEN TRIM(member_span.business_unit) = '03' THEN 'N' || TRIM(member_span.business_unit) || '-' || TRIM(member_span.prog_nbr) || '-' || TRIM(member_span.carrier) ELSE NULL END) network_id, ( CASE WHEN LENGTH(member.ymdverify) = 8 THEN member.ymdverify ELSE NULL END) cob_date FROM member_span @dblink, member @dblink WHERE member_span.ymdeff > 20090908 AND member.member_nbr = member_span.member_nbr AND TRIM(void) IS NULL AND member_span.member_nbr NOT IN (SELECT member_nbr FROM member_span @dblink WHERE(20090908 BETWEEN ymdeff AND ymdend) AND TRIM(void) IS NULL) ) ;
Marella Phani wrote:
sven different NLS settings.... How can i find the NLS setting on both the databases.. can i query some metadata table to find that..
Please let me know how to proceed
Anurag...
It is not the problem with my SQL (that I know of). It gives a correct output that I need when I simply run the SQL query.
I just give a few examples of data (no real data).But when I run Insert in staging_table (select statement). I do not see the correct data in staging_table...
Thanks for all the replies...
You can check your NLS settings with
select name, value, isdefault from v$parameter where name like 'nls%';
or in sql * plus with
SQL> show parameter nls NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ nls_calendar string nls_comp string nls_currency string nls_date_format string nls_date_language string nls_dual_currency string nls_iso_currency string nls_language string AMERICAN nls_length_semantics string BYTE nls_nchar_conv_excp string FALSE nls_numeric_characters string nls_sort string nls_territory string AMERICA nls_time_format string nls_time_tz_format string nls_timestamp_format string nls_timestamp_tz_format string SQL>
Please be careful, that my comment about to_char was that under the assumption that you have a column for the number. If the column is VARCHAR2, do not add an extra TO_CHAR around this column. He could not give problems, but is not necessary (I think it can give problems in 9i, but impossible to find a small example yet).
An idea to find the source of your problem would be to change the NOT IN subquery. At least in a NOT EXISTS a subquery. Or even better find a way to access the remote tables only once instead of twice.
not exist
INSERT INTO member_load (member_nbr, subscriber ) ( SELECT TRIM(ms.member_nbr) member_nbr, ( CASE WHEN SUBSTR(ms.member_nbr, 10, 2) = '00' THEN TRIM(to_char(m.member_nbr)) ELSE SUBSTR(to_char(ms.member_nbr), 1, 9) || '00' END) subsciber_nbr FROM member_span@dblink ms, member@dblink m WHERE ms.ymdeff > 20090908 AND m.member_nbr = ms.member_nbr AND TRIM(ms.void) IS NULL AND NOT EXISTS (SELECT null FROM member_span@dblink ms1 WHERE (20090908 BETWEEN ms1.ymdeff AND ms1.ymdend) AND TRIM(ms1.void) IS NULL AND ms.member_nbr = ms1.member_nbr) ) ;
Is ymdeff a number or a string? If it is a string, then change 20090908 in '20090908'. If it is a number then keep as it is.
-
I have a new laptop P30 and I have a strange problem with the audio.
It happens with the internal sound card as well as with a fireware external motu 828 audiocard (strangely).((There are a lot of cracks and noises when no sound is playing... and it goes up and down when the hard disk or dvd) also with data) works.
most strangely using headphones with internal sound card is no backgorund noise... and also with headphones connected to the audio card firewire... no noise at all. everything is clear and good.
the strange thing is that the problem disappears when the laptop is on battery and no power adapter plugged.
I'm going crazy with this... also because I manly use Notepad for recording audio...
help resources!
Simone.PSI changed cables and other things. .. but no difference
audio turns off from the motu and analog goes into a blender and toaudio monitors. everything works well.Hello Simone
You will be very happy boy if someone on the forum has experience with such things. In my opinion you should also check the MOTU support page. I'm sure that there must be someone with more experience to these specific questions.
Good luck!
-
Re: Audio Question on Satelite L750-12N
I got a Satelite L750-12N computer laptop and work just for 1/2 minute after sound from speakers stop and I need to relog or restard pc to read still sound speaker still 1 minute, headphones work well but I get speaker sound 1 minute and then my laptop is as mute.
I have no problems with the driver, I have reinstaled, Unistaled, updated, Changed, changed operating system and nothing same problem with win 7 x 60 and now with win 8 x 64, updated the bios with the latest version etc...
Here are some details
Operating system: Windows 8 Pro 64-bit (6.2, Build 9200) (9200.win8_gdr.130108 - 1504)
BIOS: InsydeH2O Version 03.60.453.6007 - its device
----------------------------------0701 - description: speakers (Audio device high definition)
0702 - audio playback default: true
0703 - default voice playback: true
0704 - hardware ID: HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5069 & SUBSYS_1179FC50 & REV_1003
0705 - manufacturer ID: 1
0706 - product ID: 65535
0707 type: WDM
0708 driver-name: HdAudio.sys
0709 driver Version: 6.02.9200.16496
0710 - driver attributes: Final retail
0711 date and size: 09/01/2013-05:59:47
0713 driver Provider: Microsoft
0714 - min/Max sampling frequency: 5047294, 5047294
0715-static/Strm HW Mix beef: 5047294, 5047294
0716-static/Strm HW 3D horse: 5047294, 5047294
0717 - HW memory: 5047302
0718 - voice Management: false
0719 listen/Src/EAX (tm) 2.0: false, false
0720 listen/Src/I3DL2 (tm): False, False
0721 notes: no problems found.I instaled the nVidia audio driver
> Changed the OS and nothing same problem with win 7 x 60 and now with win 8 x 64
I guess its related material issue since you have already installed the Win 7 and Win 8 OS and the question appear with two Windows systems.
Based on the fact that the earphones are OK, I think that its hardware related issue maybe speaker problems
From my point of view, you should ask service for a verification of the hardware guys. -
BlackBerry Smartphones strange question need help ASAP!
I have a strange problem with my Blackberry "BOLD" 4 9900, sometimes when I receive or make a call, the phone is connected and I don't get 2 hear the person at the other end, and vice versa, the only solution for this is hard reboot the phone that is like taking the battery and have it pop back in and then things works very well and it's soething that happens daily is there a way to diferrent without restarting the phone and why it happens instead of 1 m, also I got the replacement of the device like the previous, it was cut and after investigation of blackberry, they gave me a new device. The version of the OS in the mine is 7.1.0.746 (2108), I was invited by the service 7.1 bundle downgrade and backup center 1646, which I am not ready to do what it takes forever and I have to reinstall all the software back and set up e-mail. What would you suggest?
Also the latest BBM version which is 7.0.1.23 is installed, my phone that has WiFi but unlike previous versions where they had a backup and restore under backup management option that is no longer there, there at - it a way to get that back, I had uninstalled and reinstalled BBM but still does not work and the desktop software is not save BBM groups or pins?
Bold_4_9900 wrote:
Well thank you for the steps of IMRT I'll take an impression outside until I do it just to be double sure and I installed restart me that works well but has 2 questions in my mind. Why my phone should behave mumb silent n when I get a phone call or have to do one and the is to run return is of restarting it.This happens usually when application runs in the background, or because of any unknown third-party application installed within our system, or due to lack of memory. Reboot to shoot some time A battery is enough to solve this problem. If press and hold the Menu for a few seconds, it will appear a screen that will display all the programs running in the background, usually five will always be there (host, BBM, Message, phone, browser) you can always check if any other applications. are running in the background, if they then close them properly.
We should always try to close Applications correctly - avoid using key end to close the applications because it just minimizes the application and let it run in the background. Instead, press the Menu key, select close or Exit to exit the application. Do not leave your browser open on a page of Web active when not in use. If programs are running in the background, that this will lead to problems that you are experiencing now. Please take a look at this Article, I don't know that it will help you overcome your problems:
KB14320 : How to maximize the battery life and available memory on the BlackBerry smartphone.
Bold_4_9900 wrote:
Also, you mentioned the OS upgrade to make the site of Vodafone UK as it approves Indian have not come out, I hope it's a generic file and has nothing to do with zonal or regional my phone settings.There is no generic OS! The link I gave you is an official OS from Vodafone UK, install it without any hesitation he will not affect your device
Let me know if you have any questions.
Maybe you are looking for
-
Portege R100 - I can reinstall Windows XP Home edition with USB floppy & USB key?
I recently damaged my R100 thanks to a virus attack. Despite late cleaning things up with Norton, it will now very slowly and I think that the only way forward is through a total reinstall XP. I have the original recovery CD and a USB floppy drive bu
-
can someone help me please, I need to fix this as its making the computer
-
Foglight dashboard access to colleagues
It's on dashboard foglight sharing with colleagues. I myself remember during training Foglight tutor provided a way to change the below url so that everyone can access and No need to connect to the foglight requests access to the dashboard. http://>
-
Really stupid question, I just have not found an answer, sorry! I'm developing mobileversions of sites that need to look good and run on Blackberry. Unfortunately I don't own a Blackberry, so I use Adobe Device Central. I am getting an error on eac
-
My lamp does nothing except place & receive calls. It started when I could not access the websites (all is a DNS error), then I found I couldn't run all the apps - phone says I don't have a Blackberry ID when I do pretty darn well, cannot perform any