Strange reboots and the message "Windows has recovered from unexpected shutdown.
My computer makes strange decisions. When I got off the computer for a long time and back I find message "Windows has recovered from unexpected shutdown" it happens only when I'm without my computer for an hour or more.
My Windows Vista 64 operating system
Hello
Two ways to solve this problem, a point of view of sleep/hibernation and one of
the overall performance. Even if the two methods in common, you may need to use both.
1 I want to erase the General corruption and repair/replace damaged/missing system files:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
-------------------------------------------
How can I enable hibernation on my Windows Vista computer?
http://support.Microsoft.com/default.aspx/KB/929658
How to reactivate the lack of Hibernate Option in Windows Vista?
http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/
-------------------------------------------
Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
similar are not enabled.
Shoot sleep problems - hibernation
http://www.computerperformance.co.UK/Vista/vista_hibernate.htm
How to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html
How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html
How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686
Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)
Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
type of hibernation - see turn Hibernate on / off
All the default power plans and then set them as you wish.
I hope this helps.
Tags: Windows
Similar Questions
-
When I try to stop it restarts and also error Windows has recovered from unexpected shutdown.
ORIGINAL TITLE: I can't stop computer.
I can't get the computer to shutdown. When I try to stop, it restarts.
After that which displays Note: popular has recovered from unexpected shutdown.Please, help me to solve this problem.Hello
Did you of recent changes to the computer before the show?
I suggest to download and install the patch that is available in the following link and check if it helps.
You cannot shut down a computer that is running Windows 7, or sleep: http://support.microsoft.com/kb/977307
It will be useful. -
Windows has recovered from unexpected shutdown down
When I leave my computer idle for some time and come back I can't display or more often, I get the message that Windows has recovered from unexpected shutdown down. I tried to update all drivers and uninstalled the device intel in Device Manager. I also bought Malware Bytes, but in vain. I am a novice, so any proposed solution must be in clear language regular and detailed. Thank you.
Jitali
These accidents were related to the corruption of memory (probably caused by a driver).Run these two tests to check your memory and find which driver is causing the problem. Launch auditor. You need not run memtest again unless you want to.
If you are overclocking anything reset by default before running these tests.In other words STOP! If you don't know what it means that you're probably not
1-Driver Verifier (for full instructions, see our wiki here)
-
X 1 carbon after the closure of cover: Windows has recovered from unexpected shutdown
Hi all
I saw this forum since I got my X carbon 1. Its a great machine, but I just startred a problem. Whenever I close my lid and open it back up after a few minutes, the computer is black screened and custom allow to reconnect. If I leave it for a while, it will be an "unexpected shutdown" and reboot and give me the details of the problem, once it gets to the home screen.
Here are the details:
Problem event name: Blunescreen
OS VERSION: 6.1.7601.2.0.256.48
Locale ID: 1033
BRITISH COLUMBIA CODE: 9F
BCP1: 0000000000000003
BCP2: FFFFFA8004149060
BCP:FFFFF80047733D8
CP4:FFFFFA8003B0B010
OS version: 6_1_7601
Service Pack: 1_0
Product: 256_1
A couple of things that may be a coincidence or cause?
(1) I have to connect the internet access where I was this weekend. He keeps having limited access to the network, while other computers can connect.
(2) the symantec anti virus trial the day ended, it started.
(3) I use a lot of web storage services (google drive, skydrive) and maybe they're trying to connect when I shut down the computer?
(4) when it is closed and I unplug the charger, the charge indicator light on the outside remains lit out for some reason any. Don't know if that is related but it shouldn't behave like that my understanding of the computer.
If anyone can help me, I would be very grateful!
Best,
ER
Hi all
What the matter was, it has since resolved itself. I think it is the anti-virus software. MSE installing fixed. See you soon!
-
Windows7 error: Windows has recovered from unexpected shutdown
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
More information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA800447EA10
BCP3: FFFFF80000B9C518
BCP4: FFFFFA800A836710
OS version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files helping to describe the problem:
C:\Windows\Minidump\030811-59514-01.dmp
C:\Users\Joe Campobasso\AppData\Local\Temp\WER-125939-0.sysdata.xml
Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txt
The minidump file showed a DRIVER_POWER_STATE_FAILURE (9f) stop error caused by the athrx.sys.
The athrx.sys is the driver for the Atheros wireless network adapter.
Can you try to uninstall the wireless card driver software and install the following, which may be an updated version:
http://eSupport.Sony.com/us/Perl/SWU-download.pl?MDL=VPCF121GX&upd_id=5905&os_id=47
Also do you know what the following driver installed software? :
ndisrd.sys
You can get information on this driver by right-clicking on it in the C:\Windows\System32\drivers folder > properties > Details
-
Why I get a message: Windows has recovered from an unexpected shutdown?
Just a few minutes while I was watching a show about Hula noise continued while the video did not. The video remained on the same stroke of the screen then on the screen came a message about a problem and need to stop. There was a little more, but the message did not stay long. The message was something on "If you've seen this message before... "and I saw that, but it was about two months ago.
Here is some information. :
Name of the operating system Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Another Description of the OS is not available
Manufacturer of operating system Microsoft Corporation
System name DARRELL-HP
System manufacturer Hewlett-Packard
System model HP G62 Notebook PC
System Type x 64-based PC
2 logical processors, 2 Lossnay, 2200 Mhz, CPU AMD Athlon (TM) II P340 Dual-Core processor
BIOS Version/Date Hewlett-Packard F.29, 07/04/2011
SMBIOS Version 2.6
Windows directory C:\Windows
System directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
The local United States
Hardware Abstraction Layer Version = "6.1.7601.17514".
Darrell-HP\Darrell username
Time zone Eastern Standard Time
Physical memory (RAM) installed 3.00 GB
2.74 GB total physical memory
1.27 GB available physical memory
5.49 GB total virtual memory
3.53 GB available virtual memory
Page file space 2.74 GB
Paging file C:\pagefile.sysHelp would be appreciated as it has been on other occasions.
Thank you
Henry.
Send a copy of your dumpfile as a shared folder on your drive of sky with a link here.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65To get tips on how to configure your system to create dump files please read:
http://support.Microsoft.com/kb/254649The dumpfile will be created in c:\windows\minidump. You may need to change your settings in Windows to be able to view the file. To show hidden files type Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.
What is your computer brand and model? If not a branded computer, what is your motherboard brand and model?
Please download and run the display driver and download a copy of the report he produced on your sky player.
http://www.NirSoft.NET/utils/DriverView.html
Type system information in the search box above the Start button and press ENTER. Select file, Export and give the file a name noting where it is located. Please download your disk from sky to share and post a link here.
-
I got this warning message. what it means?
This means that there was a mistake of some sort and diagnostic information (aka a "memory dump") has been created and saved to the specified location.
If other things seem to work OK, ignore the message.
What were you doing when the warning message appeared?
-
"windows has recovered from an unexpected error" error message has frozen.
Hello, I have a problem with my laptop. This has never happened before and just recently it spent d ' attribute. I mainly use FireFox. One day while browsing in the laptop froze as I began to browse Facebook with Internet Explorer. It was frozen and stayed like that for over an hour. The mouse icon showed something treatment but it shouldn't take an hour or more to process. After pressing the power button to turn it off manually, I restarted. A ran memtest that found no problem with the memory. The HARD drive has been analyzed using System Mechanic for errors and claimed that fixed it. I ran defrag my computer C:\ [Properties]. It froze again just by going to the homepage on FireFox. After the reboot it froze after that came the message "Windows has recovered from a stop unexpected.". I couldn't move the mouse, not capable of what be a right-click or bring up the Task Manager, but the mouse icon appears to show the transformation is done whenever I brought on the Windows error message. What does that mean? I've noticed more than a moment of mobsync.exe running when the system froze.
Laptop a 3gigs of RAM and an Intel Pentium Dual-Core processor. For some reason any reduced by concerts every week HARD disk space. I'll update more and give more detailed specifications as soon as I can get my hands on my other diagnostic software.
Update
System Mechanic found the registry fragmented.
Hi SoujiroMasaki,
Thanks for keeping us posted and share this information with us.
Please answer the question-
The Windows was preinstalled on the computer?
Method-
If Windows was preinstalled on the computer, then I would have you contact the computer manufacturer to obtain a disc.
We know if you need help. We will be happy to help you.
Thank you.
-
"windows has recovered from a stop of the ucexpected.
When I shut down my computer it shows the blue screen and restarts again then he sends me a message saying 'windows has recovered from a stop of the ucexpected' he gives me these details below
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033More information about the problem:
BCCode: f4
BCP1: 0000000000000003
BCP2: FFFFFA8009658B30
BCP3: FFFFFA8009658E10
BCP4: FFFFF800037DC460
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1Files helping to describe the problem:
C:\Windows\Minidump\022313-15288-01.dmp
C:\Users\cumar\AppData\Local\Temp\WER-35537-0.SysData.XMLI am a poor in life that live in the South of Somalia and as to the became one of the programmer in the earth so please help me to find my way and continue my favorite coding software.
Thank you for helping me.Hello
Thanks for posting your question in the Microsoft Community forums.
I understand the situation in which you face. Don't worry, we'll help you get the fixed number.1. What is the brand and model of the computer?
2. don't you make changes on the computer before the show?Try the suggestions and check if you are able to resolve the error "windows has recovered from an unexpected shutdown.
Method 1:
Perform a clean boot and check if the problem caused by any third-party software.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135
Note: After the adventures of shooting set the computer to start as usual by performing step 3 above to the Knowledge Base article.Method 2:
If the steps above fail then, try the suggestions from the link:
Resolve stop (blue screen) error in Windows 7http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
Important: While performing the check disk on the hard disk, if bad sectors are found and if it attempts to repair this area, all available on which data can be lost.
I hope this helps. If you have any other questions, please get back to us and we would be happy to help you more
-
Windows has recovered from an unexpected shutdown.
I have a laptop Dell Inspiron (1440) running under Vista and often get the message "windows has recovered" when I start first to the top. Recently, I was not able to get anything on my screen despite the white power light being on. I could not turn off the power with the switch, with or without him being connected. I don't know if these two probs are related. I copied the info from a couple of newspapers of the events below. Someone has an idea what is the problem or how it could be solved?
ProductWindowsProblemStop unexpectedlyDate15/12/2010 12:37StatusNot reportedSignature of the problemProblem event name: BlueScreenThe system version: 6.0.6002.2.2.0.768.3Locale ID: 1033Files helping to describe the problem (some files may be is no longer available)Mini121410 - 01.dmpSysData. XMLVersion.txtAdditional information about the problemBCCode: 9fBCP1: 0000000000000003BCP2: FFFFFA800367E060BCP3: FFFFFA80068CB050BCP4: FFFFFA80063C9300OS version: 6_0_6002Service Pack: 2_0Product: 768_1ProductWindowsProblemStop unexpectedlyDate16/12/2010 13:13StatusReport sentSignature of the problemProblem event name: BlueScreenThe system version: 6.0.6002.2.2.0.768.3Locale ID: 1033Files helping to describe the problem (some files may be is no longer available)Mini121610 - 01.dmpSysData. XMLVersion.txtAdditional information about the problemBCCode: 9fBCP1: 0000000000000003BCP2: FFFFFA800367F7A0BCP3: FFFFFA800678E050BCP4: FFFFFA80056267D0OS version: 6_0_6002Service Pack: 2_0Product: 768_1Information about the server: 5f9c960b-de09-46fc-b857-69da420ea06fProductWindowsProblemStop unexpectedlyDate08/12/2010 13:11StatusNot reportedSignature of the problemProblem event name: BlueScreenThe system version: 6.0.6002.2.2.0.768.3Locale ID: 1033Files helping to describe the problem (some files may be is no longer available)Mini120810 - 01.dmpSysData. XMLVersion.txtAdditional information about the problemBCCode: 9fBCP1: 0000000000000003BCP2: FFFFFA80036DC9D0BCP3: FFFFFA8006842050BCP4: FFFFFA8007ECB500OS version: 6_0_6002Service Pack: 2_0Product: 768_1Hello1. have you plugged an IEEE 1394 device?There could be several reasons for this code error. Usually, it is caused by power failure of the State on the drivers updated especially display and network card drivers and sound card drivers.I suggest you update the drivers for all the hardware from the manufacturer's Web site.Reference:http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyI hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Have had problems since 31/12/09. Tech replaced Dell hard drive 14/01/10 because all software solutions did not resolve various problems, including the screen black and white letters indicating the mode without failure, or count down the regular opening. System Restore has used several times, all software removed and replaced. New Quickbooks reinstalled two times 10, it usually starts up quickly. I was told not to turn it off, just let it run. It automatically goes into sleep mode, it still does not start correctly. Last message is that Windows has recovered from an unexpected shutdown; Windows can check online for a solution to the problem. Problem event name: bluescreen
Windows has recovered from an unexpected shutdown. Windows can check online for a solution to the problem. Problem event name: bluescreen.
Hi slopchop
In the last few days have installed new programs? Or Anti Virus?
Try the steps in this link and check:
http://support.Microsoft.com/kb/958233
http://support.Microsoft.com/kb/925810
Also refer to:
After back and let us know if it helped to solve your problem.
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Error code Windows Update 80070490 and the message "Windows cannot check the updates.
Windows Update 80070490 error code appeared yesterday (21 September 2013) and the message "Windows cannot check for updates. I'm using Windows Vista 32-bit, Service Pack 2. I tried almost all the suggestions on the Internet (including on Microsoft Web page) on this way to solve this problem, including Microsoft fixed it, the update of the system, file Windows Update DIAGCAB Diagnostics tool and etc, but still getting the message. The last successful update was on 13.09.2013. All updates done before and September 13 are written as a 'success' in the folder "Update history", but when I open the folder "Installed updates", I don't see anything and it says "no update are installed on this computer", which is strange, because at the moment, Windows Update was made automatically without any problem. Please help me to solve the problem with this error code.
Thank you, you shared your experience with me, but I already solved the problem. Niemiro of Sysnative.com forum helped me for this
-
"Windows has recovered from an unexpected shutdown" Please help
Well firstly hello =]
The problem I have is that when I leave my PC on overnight, for a reason any update/install/etc when I wake up in the morning I see that it has restarted and he has a message on the screen that says: "Windows has recovered from an unexpected shutdown. When I click details see this is what I get:
Product
WindowsProblem
Stop unexpectedlyDate
08-03-2010 02:28Status
Solution availableSignature of the problem
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 11274Files helping to describe the problem (some files may be is no longer available)
Mini030810 - 01.dmp
SysData. XML
Version.txt
MEMORY. DMPAdditional information about the problem
BCCode: 124
BCP1: 00000000
BCP2: 85E133F0
BCP3: B2000000
BCP4: 00020005
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Information about the server: db7659f6-368a-4113-8453-8a5b5e45cb39(Here's a screenshot in case its more useful: http://img694.imageshack.us/img694/9095/problemhm.jpg)
This happens whenever I leave my PC slowed down and go to bed, it IS NOT the case while I use it.
I'll be glad if someone could help me because its making me crazy lol.
The PC is new I bought it a week ago about and for as far as I know its been happening since I bought it.4 GB RAM DDR3
Intel Core i5-650 3.20 GHz
nVIDIA 9600 GT 1 GB DDR3
Windows Vista Edition Home Premium 32-bit xWe do not choose it as the products you BUY to fix a NEW computer from the links that you provide here.
Your computer is covered by the warranty of the manufacturer of your computer.
I do not get a NEW PC.
Download the the difficulty of YOUR manufacturer.
Mick Murphy - Microsoft partner
-
Windows has recovered from stop unexprected at startup
my computer gets to the desk top then comes to the top with windows has recovered from an unexpected shutdown. Problem event: Bluescreen 05 version 6.0.6001.2.1.0.256.6
original title: bluescreen OS version 6.0.6001.2.1.0.256.6
Hi kbjba4,
This happens every time that you restart the computer? Have you installed a new hardware or software recently? If it is a recent issue, try using System Restore to restore the computer to a date prior to this issue. Check you the event logs to see if there is an event that occurred during the show to help identify the problem. See the links below. Measures also apply to Vista.
View from the Open event
What information will appear in the event logs (Event Viewer)?Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows has recovered from an unexpected shutdown. you need to download a patch
Remember - this is a public forum so never post private such as e-mail or telephone information
Whenever I close my laptop, or standby Windows displays "Windows has recovered from an unexpected shutdown.When I open the box of the solution, I told myself that I need to download a patch- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Download the hotfix. Do you have a question?
--
..
--
"nickjackman" wrote in message news: f983d75e-e555-45ed-8da2-540cf00f4924...
> Remember - this is a public forum so never post private information such
> like mail or telephone
>
>
> Whenever I have shut down my laptop, or put it to sleep that Windows displays "Windows".
"> has recovered from an unexpected shutdown.
> When I open the box of the solution, I told myself that I need to download a patch
>
> a.. You have problems with programs
> b.. Error messages
> c.. Recent changes to your computer
> d.. What you have already tried to solve the problem
>
Maybe you are looking for
-
Is it possible to get the Apple Mail Server to forward messages to another address
I would like to be able to redirect all mail received on my address [email protected] or [email protected] to be automatically redirected to another address (a gmail address) so that I can pick up my mail from one place and present in my reader emails in one place.
-
DeskJet 2540: deskjet 2540
I'm trying to install the HP Deskjet 2540 on my MacBook Air, Mac OS X 10.10 Yosemite running. I downloaded the drivers on the HP site and installed the drivers. When I get to the HP Setup Utility, however, the clock has been running and my printer
-
KB 2633880 mutiple facilities HAVE OCCURRED
2633880 KB security update has been installed 29 times. The computer says its there on the Control Panel, update history has 29 facilities updated, but all the time, that she strives to update because it is not recognized somewhere along the line, it
-
I boughta want 700-200Z computer (has not yet happened) but I couldn't buy it with an SSD for boot purposes because this option was not available. Is there a special reason for it? May be that this arragenment is not recommended? If in fact start wit
-
I have tried to get explore published as root with / root under the Applications managed by vWorkspace 7.6 but can't seem to find the correct settings. Path: c:\Windows\Explorer.exe Arguments: C:\Tools (I created this folder on the root to test with)