Streaking in Image, bad print head - but which? HP Deskjet 130

Similar Questions

• I cleaned the print heads, but the printed letters are still coming from pale grey.

  I have a HP Photosmart eStation all in one printer-C510a.  When I print the works are very pale.  I changed the ink cartrideges and cleaned the print heads.  Still very pale.  Any ideas what to do next?

  Hi rab27,.

  Thank you for visiting the Forums from the HP Support! I understand that when you are printing on your HP Photosmart eStation C510, the output is very pale, you attempted to clean the print heads and replace cartridges without success. In order to better assist you, what is the current operating system you use, Windows or Mac and what version?

  I assure you, you are able to make a copy. Can make you a black copy with no problems?

  Now we will make sure that you do not have the printer to print in black and white only. Please follow the steps listed below:

  1. go to your Start Menu

  2. Select devices and printers

  3. right click on your C510 and access print options

  4. click on the advanced option

  5. in the section of the characteristics of the printer, make sure that it is not set to print in grayscale

  Now, let's go and run HP print and Scan Doctor- designed by HP to offer users the features and troubleshooting problem needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  If you have changed the printing preferences, ran the PSDR HP without success, please continue here: Troubleshooting print quality problems

  I hope this helps, let me know the result.

  Thank you

• DesignJet 5500: print head print test very good page, but I still get the error message to replace the printhead

  On my DesignJet 5500, I rswitched the ink tubes, printheads and printhead cleaners dyeing anti-UV, 81 to 83.

  I got an error message saying that the black print head needed to be replaced so I bought another head black printing and after that, I was able to print a test page that shows all the colors (image quality page?).

  Magenta not give not any code of error before, but now I get an error message saying that the printhead magenta must be replaced, even if magenta print well on the printed test page.

  Hello

  The printer give you a warning when the health of the print head is low, but it will continue to print.

  If the problem has been solved after all print head replacement can be that a print head cause others to fail

  Or, just a few bad print heads

• OfficeJet pro 8500: print heads and things

  OK, maybe it's a bit confusing. I have three printers Officejet 8500. No. 1 went into a never-ending cycle of clean print heads (after more than 30,000 pages) and without me being in the room the right side of the printer depot of ink on the table. Tried the reset but not good. Bought a second hand and after a few weeks, it came in paper jam mode. Could not resolve so finally bought number three. Works a treat and has no problem. Numbers one and two are for recycling. Print heads removed and stored in an airtight box with damp cloth. What is staging. Now after spending all that money, the last thing I want, it's having problems with number three. However, I have three cartridge sets new and unopened from PC World (their own brand) which cost £39. They came with the number two of the machine. They are not dated and has no way to know at what age they are. They are not oem, I can't any advice on their likely performance, but what worries me, is can the ink begins to solidify and block print heads as they age? Like I said they are still sealed. If I change the cartridge and use a spare set of the print heads to check the print output and that something is wrong if I can swap cartridges and print heads back without the printer enter the cycle of constant head cleaning. I know there have been issues with these printers but mine is on 27 000 pages and all tests are reports back in good health. I have also several chips of HP cartridges genuine that I can use.  Sorry as that a little long-winded.

  Hello @notahappybunny,

  Welcome to the forums of HP.

  I understand that you have some questions and concerns about your ink cartridges non OEM 8500 and some.

  I would like to help.

  The following document explains on the expiry of the ink.

  Consumable inkjet HP - ink Expiration

  From what I've read, it's I think I understand that the ink may change over time.

  Because ink is sealed I don't think they're going to solidify, but the pigment used in the ink may eventually separate from water. This will certainly cause print quality problems.

  In addition, your first 8500 printhead might not be good.

  A bad print head may cause the impression of entering the cycle without end cleaning.

  I hope that I have answered your question.

• Photosmart C7180: seams of ink to be cast on the page while performing the C7180 printer heads cleaning

  I maually clean the print head, wound up. Pinter prints but it pours cyan of ink inside the printer.

  OK, well, if it's not a bad print head cartridge may be defective.

• OfficeJet Pro X476W - missing 0xc6fd0013 message, or incorrectly installed print head not detected,

  Hi, everything has been good with this printer up to a couple of days. Whist, the right kind of noises - it just stopped printing, or sometimes {in response to requests for print) spat a blank page or both.

  I tried to clean the print head, but he travels just a loop and does nothing, if the wall point, deleted and reinserted cartridge, removed market turned and replaced the duplex roller, blah blah - all the usual stuff.

  But... I've never seen such a script error before - this is worrying. The printer just died on me?

  If so, is it possible to replace the printhead on one of them?

  No indication of how to solve the problem please?

  Thanks in advance...

  I couldn't find a service manual for the OJ Pro x476w or the other.  It is usually the case for OfficeJet products but I was under the assumption that HP was poised to release a service manual for the X Pro series since his business are more than the normal OJ.

  I also don't seem to be able to view the guide to normal use of the HPs site right now.  My hope was to search through it for clues as to how to complete the resettlement of the print heads, as there is usually a section small maintnenance included in the documentation.

  Given the nature of this problem and what I heard of HP engineers that the printhead from the printer table must have a life that survives to the printer.  It is supposed to be enough printheads on eachother table backup in the case of breakdowns that users are not supposed to notice the difference.  Even through the printer is out of warranty HP may be interested in helping you with the picture of the print head.  I give them a call and see if they can offer any assistance.

  Another idea would be to find a seller of parts and ask them if they have an array of replacement for your printer print head.  If they could have some instructions on how to install that you could use to reinstall your current table.  Googling autour, I was not able find parts online so this is perhaps a good reason to call HP and ask for suggestions on where to find spare parts.

• Photosmart B109 question - display message print head problem cannot be removed

  Hi all, I just bought a used B109 printer/scanner, and I can't get rid of the message on the display screen.

  I bought the unit knowing he had a problem with Printhead and am waiting for a new print head, but the problem is, the language of unity has been defined in Czech by the former owner, and I want to change it to English. However, the process to change the language (press on high righ, middle left and bottom left buttons and the display screen) will not work because the display shows the message print head problem, and I can't get rid of the message.

  Is it possible to access the menu, while the print head message always?

  Oh, and is it possible to really connect with HP? Through their support just site ends with Q & A generic, that does not solve my problem as stated above... :-(

  Hello TonyW1967,

  Welcome to the HP Forums.

  In fact, you will have to wait until the new printhead is installed and clear the error before we can enter the setting menu to change the language on the printer.

  Here's the information to call the Tech Support of HP.  If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• OfficeJet pro 8509: printer stuck in cleaning the print heads

  Printer stuck on the envelope and has been removed with the exception of the corner (2.5 × 2). Turned on the printer to see if it would come out a up... now by initial start-up, he is stuck in cleaning the print heads, but not leaning print head. Help... Thank you.

  Hi @rodman2,

  My apologies for the incorrect link. Here are the links for the jams paper and transport for the HP Officejet Pro 8500 A909g, it will display appropriarte steps to clear the jam.

  A Message appears 'Transport Jam' for HP Officejet Pro 8500 first (A909n) and 8500 wireless (A909g) all-in-One Series

  A message "Paper jam" for the all-in-one HP Officejet Pro 8500 first (A909n) and 8500 wireless (A909g)

  If you still experience the problem you after trying the steps in the link above, I recommend you contact HP for assistance.

  Contact HP:
  Step 1. Open the link: http://h22207.www2.hp.com/us-en/contact-hp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps. Have a great day.

• Replacing the print head - carriage doesn't move to the left

  I have an Officejet Pro 8500. I am trying to replace the print heads, but the carriage does not move left as it should to access the print heads. I tried now hold the * key and I tried to turn on/off the printer twice, but it still does not move when I open the lid. How do I move? Help, please!

  I managed to solve this problem by pressing the 'OK' button instead of ' * ' button. The new print head works very well. Yay!

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

• Designjet 510 - print head not moving not

  Hello. I've been printing drawing A1 when suddenly, he stopped and told me paper is stuck. I followed the instructions to remove the paper and move on. The book was removed easily and unsigned of stuck.

  When I have on it, it shows message that cover not closed print head, but I couldn't check on it like the print head is parked at the far left of the printer.

  I reboot again, but he is stationed there for always with the same message appears.

  Any idea?

  Thank you.

  Hi again. Managed to solve the problem. Has changed her wear of the belt...

• Using Acrobat Pro and what impression on network printer it prints very slow. I have found that if we choose to print the image works fine. But how do I print as image remains for all of my PDF files. I have to choose each time now and it's not always r

  Using Acrobat Pro and what impression on network printer it prints very slow. I have found that if we choose to print the image works fine. But how do I print as image remains for all of my PDF files. I have to choose every time now and that is not always known.

  Hi jeans37547790,

  Please do mention it below as follows to change the settings:

  Open Acrobat > click file > print > click on advanced > and check the box that says "Print as Image".

  Here is the screenshot:

  .

  

  Let us know if you face any problem.

  Thank you!

  Shivam

• The document to print contains words and images.  Print the words but not pictures.  Any ideas?

  The document to print contains words and images.  Print the words but not pictures.  Any ideas?

  Have you tried "Print as Image"?

• Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Most desktop printers cannot image all the way at the edge of the page.

• Deskjet 932c rest print head to the right, make noise interference but no paper?

  My printer is jammed. Turn it on after unplugging it and print head slides to the left the pass on the right side and made a noise as if it is stuck. There is no paper jam. Can you suggest what is the problem?

  I resolved glancing at this site http://support.hp.com/us-en/document/bpd09315 thanks for help forums.