Stream 11 HP: HP flow 11 not answer anything

Similar Questions

• HP stream 11 inches: black screen will not do anything

  I restart my laptop and having said it has restarted for 20 minutes, the screen went black. Now, the screen is black, it turns off (the power light does nothing) and it does not recognize when the charger is plugged in it please help me this is my only computer for school.

  Let the unplugged charger until the battery completely discharges then reconnect and try to start it.

• I am able to receive streams Netflix and Amazon Prime but not my shared network libraries.

  i AM ABLE to RECEIVE NETFLIX AND AMAZON PRIME FLOW BUT NOT MY NET WORK LIBRARIES

  original title: HOW CAN I GET MY WIRELESS BLUERAY PLAYER to CONNECT to MY HOME GROUP NETWORK for ACCESS to MY MEDIA? HIM DRIVE "SEES" MY COMPUTERS BUT DOES NOT CONNECT TO THEM.

  Hi KEN138,

  ·         What operating system is installed on your computer?

  ·         What exactly happens when you try to connect to the home group? You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  I suggest you to return the item and check.

  Stream your media to devices and computers using Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/stream-your-media-to-devices-and-computers-using-Windows-Media-Player

  You can also see the article for more information on the problems of connection Wi - Fi and wireless.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please you with more information on the issue so that we can you extra.

• Outlook and Chrome not answer-constantly

  I noticed that especially after coming from his sleep, Chrome and Outlook (2011) will not answer.  There is no solution but to the family force them.  An activity Manager does not show their or their assistants to be processor or memory overload; in fact, my RAM is usually less than half used. Why these software don't like my iMac?

  Model name: iMac

  Model ID: iMac10, 1

  Processor name: Intel Core 2 Duo

  Processor speed: 3.06 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 3 MB

  Memory: 4 GB

  Bus speed: 1.07 GHz

  Boot ROM version: IM101.00CC.B00

  Version of the SCM (System): 1.52f9

  Serial number (System): ZL0031PG5PC

  Material UUID: 71CBB1B3-7993-5D39-818F-222F3CAF4108

  If the problem started after you update OS X...?  Then, it looks like you will have to perhaps to update or uninstall these third-party App which are the cause of the problem.

• Mac Pro 2013 become hot, not answer and stop.

  Hello

  I have a 2013 Pro Mac, I bought as used before 5 months and he was well, before 3 days, the weather was warm (approx. 28 °) and under normal conditions, use my Mac Pro start freezing and not answered every 15-30 Minutes and automatically stop or I have to disconnect the power cable.

  I started looking on the problem, I checked the bodies of the Mac Pro and I found it very hot, the fan worked but slow, I searched on Google on a tool or a command I can do the fan faster and I found an application called SMC FanControl, this app showing me that Mac temperature of 48 ° also with this app, I was able to turn the fan to Max speed, I heard the noise of the fan, it worked perfectly with this app. The Mac Pro early to work perfectly also with in normal and hard jobs.

  

  Yesterday, I decided to clean all of my Mac Pro material, maybe that this solves the problem, it was dirty, and I did as new as you can see in this picture:

  I also used for better CPU and GPU thermal compound I found on the market.

  

  BUT the problem came with the first video editing, 48 ° c, closing down and not be able to turn it on for 5 Minutes.

  The question is: why my Mac Pro not control the fan automatically? is it a software or a hardware problem? If the material someone we know exactly?

  Best regards

  Which component was 48 c?

  What was the hottest component?

  It's not hot at all.

  From now on my MP 2013 with base CPU, CPU ITPP and CPU sensors 1-4 are about 100 ° C and speed of 84CFan two GPU time 1750

  • Record the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

  Search before the journal entry that begins with BOOT_TIME since it is the first line of a startup

  Apple cannot help you because you have disassembled the Mac.

  You already reset the SMC to take part. try resetting NVRAM/MRTP memory

  How to reset the NVRAM on your Mac - Apple Support

• Why am I being asked to do this?  I have not changed anything.  "Update of your Apple ID, you must verify your identity to make this change." Answer your security questions to continue. "

  Why am I being asked to do this?  I have not changed anything.

  "Update of your Apple ID, you must verify your identity to make this change." Answer your security questions to continue. "

  What do you do when you are prompted to do so? What is a pop-up? The popup has a link on which you are supposed to click, or it actually lists your security questions? Need more information.

  See you soon,.

  GB

• I have an iPhone 5 that answering an appeal not heard anything. The problem is solved by rebooting the mobile phone. What is going on?

  I have an iPhone 5 that answering an appeal not heard anything. The problem is solved by rebooting the mobile phone. What is going on?

  Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

• I forgot the answer to my security question rather than I sent to apple to get back the answer. but Apple did not answer me pleas help me >?  iPhone 6 9.2ios

  I forgot the answer to my security question rather than I sent to apple to get back the answer. but Apple did not answer me pleas help me >?

  iPhone IOS 6 9.2

  You will need to talk with the security of the accounts to AppleCare. Be sure to have your ID ready PW and Apple because you need sigun in Id.apple.com to generate a temp support PIN, then be able to provide one more piece of the verification of identity, they can reset your questions for you.

• I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down

  I keep getting emails telling me that if I do not answer with my name, password, Date of birth and the country or territory my Windows Live will be Shut Down.  The person who sends me emails is also with MSN.  Everyone knows this?  Thanks for your help.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is bound using Windows Live (Messenger) and would be better suited in the Center to help Windows Live Messenger. Please visit this link to find a community that will provide the support you want.

• What on Earth is interactive email? Forum does not answer the question

  What on Earth is interactive email? Forum does not answer the question

  'Interactive email' is basically including * everything * in the email itself.  So instead of an e-mail that says: "Buy your ticket concert on our web page" with a link to the web page - you can actually enter information * in the email * and click on submit and it of as if you go to their web page and did.

  It looks like a horrible idea for me.  I would like it compared to the difference between the junk mail in your physical mailbox compared to someone who comes to your door with the same sales pitch that would have been on the junk e-mail.  It will probably cause more problems than it should be, IMO.

• System volume information stolen hard drive. VERY slow computer and windows show only (not answer) for 2 to 10 seconds at a time. Help, please.

  After starting my computer to Windows 7 Enterprise, I noticed that it runs very slowly.  for example, the scrolling of a window of firefox crashes every 10 seconds or more.  The gel lasts between 2 and 10 seconds with the little blue wheel, spinning, (not answer) in the toolbar.

  I pulled the top of resource monitor and to see that 4 PID - C:\System Volume Information\ {guid} {guid} is running non-stop with about 720ko read by writing dry and 6 MB per second Disk 0 length of the queue is pegged at 5.  from time to time (once every 10 to 15 minutes), the queue goes to 0 and the computer starts acting normally (i.e. fast) again.  But once the length of the queue points to 5, the problems continue.

  I am running in raid 5.

  I noticed that vssvc.exe is running (PID 4144) with a reference to c:\System Volume Information and the same GUID as PID 4 - system and kernel.

  Any idea what I can do to get back on my computer?  At this point, it is absolutely unusable.

  Thank you

  Marshall

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• SPA-3102 PSTN idle status, will not answer but watch sounds.

  Greetings,

  I am a complete newbie in the world of voip. I have an spa3102 and a computer virtual trixbox. When I use my softphone to compose, it makes to the spa3102 (shows the id of the last and gives a status of the appellant voip 'reply') but I get an "all circuits are busy now" and does not change the status of IDLE pstn. It also will not answer the phone for incoming calls to the PSTN.

  Outgoing stuff could be a problem of numbering plan (don't know not just guessing) here it is:

  (S0:xx. <@gw0>)

  I tried the regular (or default) (xx).

  incoming calls are supposed to go to a handset on my desk, for example ext 101 is the dial plan: (S0:101@internalip)

  I can't see the forest for the trees. Can someone give me some advice on where to look. I'm completely puzzled by something non-response externally, and why I get a all circuits are busy if there are inactive on the status page.

  an interesting note: If line1 is connected to an analog phone, it will dial a number, but always shows failover for a reason any...

  Thank you very much!!!

  Greetings!

  Thanks for the reply. I do not know if I explained properly (sounds like I don't have). I have a trixbox and I use the SPA in interface with my RTC and I want to have a fax machine (but later) on the FXS port. The problem I have is that I could not field calls to the collection. They would just ring and ring. I thought it was a dial plan (and hope it was not a hardware problem), but he just wouldn't answer the phone. He would show 'Ringing' like the PSTN status, but Voip would be "IDLE". I've been pouring through the guide of the administrator, forum messages for about 2 weeks now.

  But I didn't know what the problem was. The spa3102 is waiting until she can establish a connection (with the internal phone system) until it meets the PSTN. This is why it continues to ring. The problem why it shows it is inactive and (even with enabled full logging to a syslog box) no traffic to SIP the trixbox internal... because I had the port internal plugged in... not the WAN port (or internet). Thats right... silly me...

  I gave the wan port an address on the same subnet and moved the cable to it, once I could talk to her I change address internal to something even not on my network (if no routing problem) and left the network adapter disconnected (internal nic). Then I changed the wan to the old internal address address (trix trunk was already configured in this ip address anyway...) and PRESTO! I tried calling the number RTC and started to receive log entries showing the sip signaling and he's trying to route the call to the box of trix. It works now! So he was not answering the phone in my case, because it could not connect to the pbx or the ip phone and that because I don't use the WAN/INTERNET port on my SPA. Something I don't remember seeing in the textbooks as a "hafto' or a 'must '... I might have forgotten that of course, but I don't remember seeing him there.

  So if you enable logging, and then call this number (I used the PuTTY and 'tail-f /var/log/spa3102.log"to see the entries that they light up the box of syslog) and you don't see any sip traffic, it could be that you must use the WAN/INTERNET port instead of the internal port apparently logical... BE sure THAT ENABLE YOU REMOTE ADMIN if you decide to give it a shot.

  Also you can do the spa to answer the phone, even if it has no where to send the call (or if you want incoming people to use a PIN) on the GATEWAY PSTN - VOIP, there is a setting "off hook during the VOIP call" (default = no), but change that Yes - he would answer... and then sit there... If I had a PIN with a dial plan that is associated with this would give a fast busy after the entry of the PIN. BUT now everything is cool!

  Thank you!

• How can I set up an automatic reply to the messages that I can not answer because I'm missing?

  Don't want incoming when I am out of the country, reloaded emails on my blackberry for each incoming e-mail.  So with an atomatic answer that I can not answer would help that shoot.

  I don't see what that has to do with Vista can I or WIndows mail.  Usually, go you to your mailbox, which is located on a server, not on your PC, directly from the Blackberry.  I don't know anyway to have an automated response to messages that arrive in your Inbox on the server side and it is likely that your Blackberry will see little matter what type of response automated you have.  If I was faced with this situation, I would create a Google Mail account, set up my original (server side) account for messages automatically transfer to the gmail account and ignore gmail until my back account.  You can have your original mailbox to send an automatic response, if you want to, because it transmits incoming messages to other mailboxes mailbox.  Your Blackberry should not see the outgoing messages from the server.

• SE error message: "nvlddmkm.sys not answer but recovered" and cannot access Starcraft II or LOTRO

  Original title: nvlddmkm.sys does not

  Just started having this couple weeks message. Killed or damaged at least one of my 9800 GT cards (SLI), which have been replaced under warranty. Who sets the part of the question of the display, but still cannot access to Starcraft II or LOTRO - connect and just get a black screen (have sound, no picture). Then the message "nvlddmkm.sys not answer but recovered" then nothing and having to use task Mgr to close the program. Here's the suspect: update the video driver (uninstalled old, clean install) which again helped a little but the screen remains black when entering the games. While they inspected the files, the file Nvidia\Displaydriver shows the new driver as the device Mgr when I check that. BUT then when I check the directory ofC:\windows\system32\drivers there is still an OLD version of nvlddmkm.sys. I'm sure that it is the culprit, but it won't let me delete it or rename it who were other corrections that I read about. I know that this is an endemic problem with Windows and has been for awhile now. ANY suggestions?

  Hi malomar,.

  1. This only happens when you play Starcraft II and LOTRO?

  You can try to uninstall and reinstall all the programs and features Nvidia drivers and Device Manager.

  Step 1:

  Uninstall the audio drivers from programs and features

  a. click on start

  b. type appwiz.cpl in the start search

  c. search for all driver packages, Nvidia, right click and uninstall.

  Step 2:

  Uninstall the drivers from Device Manager.

  a. click on start

  b. type devmgmt.msc in search, and then press enter

  c. in find Manager device for the device, right-click on it and select the option uninstall.

  After you remove the drivers of these two places, you can try to remove the NVIDIA folder and restart to see if that solves the problem after I installed the generic drivers.

  Step 3:

  To delete the folder:

  one. Click on start and Type C:\windows\system32\drivers folder in start search

  b. click on drivers and select nvlddmkm.sys

  c. right click and rename nvlddmkm.sys in nvlddmkm.sys.old. or delete.

  d. restart the computer and check.

  You can also check the manufacturer's website and download the latest drivers from Nvidia:

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Also check the Nvidia support link:

  http://forums.nvidia.com/index.php?showtopic=45605

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• (not answer)

  my computer guard saying (not answer) and mix web pages (display both parts). start and stop is extremely slow.any help will be highly appreciated.

  Hello

  Use the methods in the answer above for IE issues and those below, if there is General
  performance issues.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.