Streaming between computers on a home network uses the data plan

original title: streaming

is it between two computers on the network streaming domestic chew for download?

Hello

You don't even have to have internet access to the flow of your Windows 7 network.

Getting started with streaming media
http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-media-streaming

Getting started with streaming media
http://Windows.Microsoft.com/en-us/Windows7/privacy-and-security-when-streaming-your-media-frequently-asked-questions

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • Can I use the CD to add my printer to the other computers on my home network?

    Just purchased and installed a HP LaserJetPro 400 M401dn to my home network. Now that it is installed and configured as the default printer for my laptop, will it use the CD to add this printer to my wife and daughter networks, too?

    We are all running Windows 7 on every laptop.

    Thank you

    Hey rhodesmk,

    I recommend to install the drivers of comprehensive features, either from the CD or a download, on all computers that you want to use the Laserjet Pro 400 with.  This will ensure that all the features with each PC you want to have connected with the printer.

    I hope this helps.

  • I am not able to connect Stor-E for the other computers on my home network

    I just bought a Stor-E but I can't connect to other computers on my home network which I think is a Netgear router which is connected to my BT home hub.

    I can access the stor-e of my laptop and pc, but cannot access the Stor-E when I go to the working groups then on my PC it calls for a Net User ID and password have tried my user id and password for my pc but this doesn t seem to work.

    Someone has an idea what I am doing wrong?

    But in general your Stor-E works correctly when you connect it directly on different computers, right?

  • How can I remove the computers in a home network, I created?

    Original title: leave the Working Group

    How can I remove the computers in a home network, I created? How can I remove a home network? I know it's easy with windows 7, but I can't understand for the life of me how do it with XP.

    Hello

    Let me see if I can sort this out.

    You have a network named "Homegroup".

    You have several working groups set in place, and you want to remove a computer from one of them?

    If Yes, go to this computer, log in as administrator

    Click Start > right click on my computer > select Properties

    Click the button change

    Delete the name of your workgroup of the lower part of the window and in its place type 'WORKING group' which is the default setting.

    I hope this helps!

  • That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

    That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

    A

    Most likely, the computer becomes a network address of a router. The assignment of an address ("lease") expires and must be renewed after a certain period of time, which could be an hour or a day. The lease expired without being renewed because the device has been disconnected at the time. Meanwhile, the address has been leased to another device on the network, or maybe the router has not updated its list of addresses the leases. When the device offline comes back online, a conflict results. Depending on the type of router you have, the conflict can resolve itself automatically. If not, then in the menu bar, select please

    ▹ System Preferences network ▹ 

    If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the TCP/IP tab in the sheet that drops down. Look at the menu option

    Configure IPv4

    If the selection in this menu is

    Using DHCP

    Click on the button

    Renew the DHCP lease

    Test.

    Make sure that you have more than one DHCP server on the network. That could happen if you have more than one access point Wi - Fi, or if you have a router and broadband a wide device distinct in connection mode sharing.

    B

    Less likely, you have a network address that you assigned yourself and another device is itself by assigning the same address. In this case, the selection to configure IPv4 menu will be either manually or using DHCP with manual address. This kind of conflict will not be resolved automatically. You have the following options to solve:

    1. Change the selection in menu using DHCP.
    2. Change the address assigned manually to one that is not used by another device.
    3. Change the address of the other device.

    Which of these options you choose depends on the details of why you use a static IP address. Any changes you make to the network settings is necessary before taking effect. To do this, click OK, and then click apply.

    If the router is also your device at wide band, then he may be operating in bridged mode. In this case, only one customer at a time will be able to connect to the Internet. Consult the manufacturer or ISP documentation for how to reconfigure the device in the connection mode sharing.

    C

    According to a report a "DirectTV" receiver can cause the problem. If necessary, disconnect the device from the network, or power off and test. Consult the support services provider.

  • a purchased 6 1586 unlocked iPhone on the apple USA online store will support VoLTE in India Reliance Jio network using the iso 9.2.0

    a purchased 6 1586 unlocked iPhone on the apple USA online store will support VoLTE in India Reliance Jio network using the iso 9.2.0

    See the list of LTE compatibility below.

    http://www.Apple.com/iPhone/LTE/

  • Can I do a fresh install of Windows 7 Home and use the old product key?

    Hello

    I got a laptop from a former employer who removed the hard drive before give me the computer.

    I installed a new hard drive and you want to do a fresh install.

    The previous operating system was Windows 7 Pro OA Enterprise Edition and I have the product key for it.

    Can I do a fresh install of Windows 7 Home and use the old product key?

    and after that I still increases to 10 Windows using the same product key?

    Concerning

    Regrow72

    If you have plans to upgrade to Windows 10 Home, I would skip trying to reinstall Windows 7 and go directly to Windows 10.

    You can use your family Windows 7 product key to install Windows 10, learn how:

    How to install and activate Windows 10 using your Windows 7 or Windows 8 product key

    Step 1: How to download official Windows 10 ISO files

    Step 2: how: perform a clean installation of Windows 10

    If you are experiencing problems activating Windows 10, see:

    Activate your Windows 10 license with Microsoft Chat support

    I recommend to go to Windows 10 now while you can, because Microsoft will stop the free upgrade offer at the end of July:

    Windows 10 free upgrade offer ends July 29 as planned

    Microsoft to remove Windows Notification Nag upgrade 10

    Resources:

    Windows Free Upgrade on schedule 10 to end July 29, 2016 - what are your options?

    If you still want to reinstall Windows 7 Home Premium, please see:

    For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

    It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

    Given that this option is no longer available, what are your options? See the article for more details:

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  • Windows 7 keeps changing home network to the public network, without pompting, in this case I can't access the internet, even though my router still receives the internet signal.

    Windows 7 keeps changing home network to the public network without asking for confirmation, this prevents me to access the internet

    Hi douglas wilson,.

    Welcome to the Microsoft Answers site!

    Since when are you facing this problem?

    We need additional information to help you better.

    Make sure that you save the settings after clicking on homepage or work profile in the network profiles.

    Strengthen the security of your computer and your network:

    Identify and resolve home network problems:

    http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

    Open network problem:

    http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • internal web server access to the content of the network using the public ip address

    Hi, I saw similar topics, but not a clear answer about it. I have a PIX 515e with two interfaces, a web server internal (ip 192.168.0.5) and internal users want to access the server by its (99.99.99.9) ie public ip address is not using DNS. Tried the command alias ' alias (inside) 99.99.99.9 192.168.0.5 "but does not work for http. I can access the server on the local network using the public address for smtp, pop3 and ftp with or without command alias, but not the http service. Any idea?

    a few quick comments.

    a function of the command "alias" is to force the pix to manipulate the dns response. However, you mentioned that you didn't use dns.

    'alias' command will also force the pix to send traffic to 192.168.0.5 when it receives a packet from the inside and intended to be 99.99.99.9. However, since the host and the server are located in the same segment, i.e. pix must re - route the packet to the inside interface, and this operation is not supported with pix v6.x.

    In addition, you mentioned the inside host can access the smtp, pop3 and ftp using 99.99.99.9. This is interesting because the host of 192.168.0.0 would not directly have access to the host of 99.99.99.x without router.

  • Using the data of EBS in BI Publisher

    Question: Is it possible to directly use EBS data in BI Publisher? If so, can you point me to the documentation?

    Here's the scenario:

    Imagine that our company uses Oracle E-Business Suite. All the columns, tables and diagrams Oracle related to BSE. It is the backbone of our company data. Couldn't live without it.

    We're also crazy to OBIEE, especially BI Publisher. We have people who are experts in BI Publisher.

    The CEO of the company would like to enjoy the mountains of data available in EBS, but also the expertise of the people who are trained and skilled in BI Publisher, using the data of EBS directly in BI Publisher. The Director-general provided us with a budget and staffing appropriate to perform a single installation of all structures must be added, or middle, for this to happen.

    Objective of the Chief Executive Officer is for data additions and revisions in EBS will be included automatically in the reports BI Publisher. Assuming that between Monday and Tuesday, none of the structural changes that occurred in any of the EBS diagrams, tables or columns, assuming that everything we have done is add and/or modify data from BSE, then the BI Publisher reports must reflect the Monday data Monday and, without having to do anything in the meantime, reflect the Tuesday data just sitting Tuesday and running the editor of BI reports Tuesday morning. Not every day to rebuild XML files or something like that. Just clean and totally transparent use of the EBS data it gets added and updated during the normal course of business.

    In general, what steps do we need to carry out - in EBS, in the XML Editor (if any) and BI Publisher - to directly use the data of EBS in BI Publisher on a daily basis as described above?

    Ideally, I like just go to the Admin page in BI Publisher and add EBS as a new data source, or perhaps to use the section of the integration of the Admin page, as we would with discoverer or workspace of Hyperion and Shared Services. But I know that's not as simple as that.

    Can you help clarify?

    Thank you!

    "Ideally, I like just go to the Admin page in BI Publisher and add EBS as a new data source, or perhaps to use the section of the integration of the Admin page, as we would with discoverer or workspace of Hyperion and Shared Services. '" But I know that's not as simple as that. »

    I don't know why you don't think it's as simple as that, but it is. Add a new JDBC data source, assign it to BEEP roles, create templates of data/queries against this data source and you're ready to go.

    To use the multi-org views, you need to set the org_id in forward initiation of the report.

    What version of BEEP are you using? We have the last BEEP 11 g, we use eBS (R12) as the security model, Teradata is our main source of data, but almost all the reports uses the security context for the multi-org eBS to limit the data of Teradata, based on the security profile of the user as defined in eBS.

    I hope this helps.

    Thank you
    Sunder

  • FaceTime uses the data

    FaceTime uses the data when it is off wifi?

    Yep, it will use the cell data. About 3 MB of / minute.

  • ListView xml by using the data source does not?

    Hello

    When I use the data for loading XML source, listview displays data only if there is at least 2 element in the XML file.

    import bb.cascades 1.0
    import bb.data 1.0
    NavigationPane {
        id: nav
        Page {
    
            id: emp
            titleBar: TitleBar {
                visibility: ChromeVisibility.Visible
            }
            onCreationCompleted:
                                    {
                                        dataSource1.load(); //load the xml when page is created
                                    }
            actions: [
    
                ActionItem {
                    title: qsTr("Create List")
                    ActionBar.placement: ActionBarPlacement.OnBar
                    onTriggered: {
                        dialog.open();
                    }
                }
            ]
            Container {
                topPadding: 30.0
                leftPadding: 20.0
                rightPadding: 20.0
    
              ListView {
                  id:list1
                dataModel:dataModel
                 listItemComponents: [
                            ListItemComponent {
    
                                StandardListItem {
    
                                     title: {
                                    qsTr(ListItemData.name)
                                }
                                }
                            }
                        ]
    
                }
    
            }
    
                 } //page
    
        attachedObjects: [
             GroupDataModel {
                        id:dataModel
                    },
                     DataSource {
                          id: dataSource1
                          source: "models/employeelist.xml"
                         query: "/root/employee"
                        type: DataSourceType.Xml
                          onDataLoaded: {
                          dataModel.clear();
                           dataModel.insertList(data);
                          }
                        },
            Dialog {
                id: dialog
                Container {
                    background: Color.Gray
                    layout: StackLayout {
                    }
                    verticalAlignment: VerticalAlignment.Center
                    horizontalAlignment: HorizontalAlignment.Center
                    preferredWidth: 700.0
                    leftPadding: 20.0
                    rightPadding: 20.0
                    topPadding: 20.0
                    bottomPadding: 20.0
                    Container {
                        background: Color.White
                        horizontalAlignment: HorizontalAlignment.Center
                        preferredWidth: 700.0
                        preferredHeight: 50.0
                        Label {
                            text: "Add Employee List"
                            textStyle.base: SystemDefaults.TextStyles.TitleText
                            textStyle.color: Color.DarkBlue
                            horizontalAlignment: HorizontalAlignment.Center
                            textStyle.fontSizeValue: 4.0
                        }
                    }
                    Container
                    {
                        topPadding: 30.0
                        layout: StackLayout {
                            orientation: LayoutOrientation.LeftToRight
                        }
                        Label {
                        text: "Employee Name "
                    }
                    TextField {
                        id:nametxt
                    }
                }
               Container {
                   topPadding: 30.0
                        layout: StackLayout {
                            orientation: LayoutOrientation.LeftToRight
                        }
                        Button {
                           text: "OK"
                   onClicked:
                       {
                   var name=nametxt.text;
                   if(nametxt.text=="")
                   {
                        _model.toastinQml("Please enter a name");
                   }
                   else
                   {
    
                       _model.writeEmployeeName(name); //writing name to the employeelist.xml
    
                       nametxt.text="";
                       dialog.close();
                     dataSource1.load(); //loading the xml
                     }
    
                       }
                            preferredWidth: 300.0
                        }
                Button {
                     text: "Cancel"
                     onClicked:
                         {
                             dialog.close();
                         }
                            preferredWidth: 300.0
                        }
                             }
                }
            }
        ]
    
    }//navigation
    

    When I add a name to the first time to the XML, the list shows nothing. Then, when I add a new name, it displays the list.

    Why is it so? Is there a any mistake I made?

    Help, please!

    Thanks in advance

    Diakite

    It seems that there is a problem reported on the DIT that was refitted with internal BlackBerry MKS defect tracking system. Until this issue is reviewed by our internal teams, please use the solution suggested by the Rapporteur for the question by introducing an "if" statement before inserting data to the DataModel:

                    if (data.name) {
                        empDataModel.insert(data);
                    } else {
                        empDataModel.insertList(data);
                    }
    
  • migration from 10g to 12 c using the data pump in

    Hi, while I used the data pump at the level of the schema before, I'm relatively new to the full database import.

    We are trying a full database migration to 10.2.0.4 to 12 c using the complete method of database data pump over db link.

    the DBA has indicated to avoid move SYSAUX and SYSTEM objects. but initially during the documentation review, it appeared that these objects are not exported since the TRANSPORTABLE given target = system NEVER. If anyone can confirm this? done import and export log refers to the objects I thought would not:

    ...

    19:41:11.684 23 FEBRUARY 15:Estimated TABLE_DATA 3718 objects in 77 seconds

    19:41:12.450 23 February 15: total estimation using BLOCKS method: 52,93 GB

    19:41:14.058 23 February 15: object DATABASE_EXPORT/TABLESPACE of treatment type

    20:10:33.185 23 February 15: ORA-31684: TABLESPACE object type: 'UNDOTBS1' already exists

    20:10:33.185 23 February 15: ORA-31684: TABLESPACE object type: 'SYSAUX' already exists

    20:10:33.185 23 February 15: ORA-31684: TABLESPACE object type: 'TEMP' already exists

    20:10:33.185 23 February 15: ORA-31684: TABLESPACE object type: 'USERS' existing

    20:10:33.200 23 FEBRUARY 15:96 objects TABLESPACE finished in 1759 seconds

    20:10:33.208 23 February 15: treatment of type of object DATABASE_EXPORT/PROFILE

    20:10:33.445 23 FEBRUARY 15:7 PROFILE items finished in 1 seconds

    20:10:33.453 23 February 15: treatment of DATABASE_EXPORT/SYS_USER/USER object type

    20:10:33.842 23 FEBRUARY 15:1 USER objects ended in 0 seconds

    20:10:33.852 23 February 15: treatment of DATABASE_EXPORT/SCHEMA/USER object type

    20:10:52.368 23 February 15: ORA-31684: USER object type: 'OUTLN' already exists

    20:10:52.368 23 February 15: ORA-31684: USER object type: 'ANONYMOUS' already exists

    20:10:52.368 23 February 15: ORA-31684: USER object type: 'OLAPSYS' already exists

    20:10:52.368 23 February 15: ORA-31684: USER object type: 'MDDATA' already exists

    20:10:52.368 23 February 15: ORA-31684: USER object type: 'SCOTT' already exists

    20:10:52.368 23 February 15: ORA-31684: USER object type: 'LLTEST' already exists

    20:10:52.372 23 FEBRUARY 15:Finished objects USER 1140 in 19 seconds

    20:10:52.375 23 February 15: object DATABASE_EXPORT/ROLE of treatment type

    20:10:55.255 23 February 15: ORA-31684: object ROLE type: 'SELECT_CATALOG_ROLE' already exists

    20:10:55.255 23 February 15: ORA-31684: object ROLE type: 'EXECUTE_CATALOG_ROLE' already exists

    20:10:55.255 23 February 15: ORA-31684: object ROLE type: 'DELETE_CATALOG_ROLE' already exists

    20:10:55.256 23 February 15: ORA-31684: object ROLE type: 'RECOVERY_CATALOG_OWNER' already exists

    ...

    the most insight.

    The schema SYS, CTXSYS and MDSYS ORDSYS are not exported using exp/expdp

    DOC - ID: Note: 228482.1

    I guess that he has already installed a 12 c software and created an itseems database - so when you have imported you have this "already exists."

    Every time the database is created and the software installed by default system, sys, sysaux will be created.

  • JDeveloper 12.1.2 has a problem with links when you use the data bean control

    Build JDEVADF_12.1.2.0.0_GENERIC_130608.2330.6668

    The problem that I am facing is:

    I used the data bean control to create our user interface. After that I dragged my jsff page data control, links have been created.

    I opened the XML pagedef to my page. On the Bindings tab and executable, I added a few links more by clicking on the Green plus sign. After I saved my changes, I noticed that some other links have been replaced by a link to the different executable files.

    This behavior occurs almost everytime I have edit links. Does anyone else see this problem?

    It looks like another instance of the bug described in https://java.net/jira/browse/ADFEMG-156

    This bug is fixed in 12.1.3. If you need the fix in 12.1.2 you should open a SR with support.oracle.com and ask a backport.

    Timo

  • How to use the date with the report parameter format

    Hi all

    How to use the date format with this tag function,

    <? [email protected]:P_FROM_DATE? > <? $P_FROM_DATE? >

    This date of form source of report and setting is coming as this 2012/11/01 00:00:00.

    So now I need this in MY-DD-YYYY marker. I tried like this..? [email protected]:P_FROM_DATE? > <? $format - date: P_FROM_DATE; ' DD-MON-YYYY '? >

    but its giving error. Can someone pls how to convert to the format of date custom.

    Thanks and greetings
    Srikkanth.M

    Problem solved.

    REF this link

    Date Format of XML

Maybe you are looking for

  • Google Earth crashes Firefox 10.0.2

    I see Firefox hang when using Google Maps. More precisely when switching to the option of Google Earth in Google Maps. The problem is more likely to occur when the statement to view the horizon but can also crash when moving everything. I didn't used

  • cDAQ material requires a supply reset after the release of VI.

    My LabVIEW program seems very simple. It uses two Express VI, an analog input (NI9219) and the entry of a meter (NI9411). The program works fine until I have stop. Then it will not start again unless the chassis cDAQ (NI9472?) is the power to bike. T

  • Windows update fails on my machine windows 7 since August.

    I just realized that the Windows 7 pc used by my children updates not more since about last August.   I disabled the auto update in an attempt to upgrade a single package manually, but the installation fails at all times, regardless of the package th

  • Computer turns on his car after so many hours.

    Then I closed my computer after that I really put it, t know how many hours it turns its self on. What could be my problem?

  • FIXED: Photosmart 635 does (even with fresh batteries)

    have not used the camera in a year.  I put new batteries. -green light comes on but nothing works. -on/off switch causes nothing (the lens does not move) -is there some sort of factory reset available? FIXED: used end of the paperclip to reset hardwa