Streaming video of problem after the update of the lollipop

Similar Questions

• Satellite U400 - PSU40E Synaptics touchpad problem after the recent update to BIOS

  Toshiba welcome,

  I've tested this in reverse, this is why the statement in the subject as it looks. After upgrading the bios of 3.00 to 3.50 touchpad loses its precision. Very rude and useless its like that.

  I tried different drivers, everything, but the only way to really solve this problem was it downgrade to 3.00 OR uninstall the driver Synaptics completely. Second solution, unfortunately, is unacceptable, because then I lose some features, like click on contact, which I don't use and control.

  Best regards

  Wojtek

  Hey Buddy

  I U400 and the BIOS has been updated to the newest one.
  The touchpad works like a dream. I m using Win XP and Vista and there is NO problems after BIOS update!

  In your case, this may be only a software problem and I think you can use the Toshiba Recovery disk and could reinstall the whole OS from the Toshiba drive

  It is a really radical solution because the whole HARD disk may be formatted, but if the resettlement of these two drivers touchpad didn t help then I think this would be the last solution.

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• Windows 7 - problems after Windows updates

  When Windows Update 17 new "updates", it due to my new HP computer to not connect to internet.  I talked to HP two hours Monday, 18th and thought we had set.  But the updated Windows Update during the night and the next day he couldn't connect to the internet.  Two hours with HP and finally the gal thought it would be better if I have the option of not accepting updates, or accept only updates Windows or HP.  I did today and do not connect to the internet.  Whenever I have to restore to October 16, which is the last time, he did not work properly.  Help, please!  Thank you...

  Have you tried running the resolution of Internet connection problems after these updates?

  Click Start, type: Troubleshooting

  Press enter on your keyboard

  Do a search for Internet connection

  Double-click the Internet connection problems and follow the wizard to display on.

  Using Windows - Management, configuration, and troubleshooting updates
  http://www.windowslive.com/connect/post/59e9b812-d92c-4dc7-B53C-c1a9ee5bcaf3

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I'm having problems after the restart with docking station, applications, etc.

  OS X: 10.11.3

  Mac Pro 2010 2 x 2, 66 GHz 6-Core

  Graphics NVIDIA Quadro 4000 card

  24 GB Ram

  50 GB of free memory

  4 additional hard disks

  Hello community,

  I have a strange problem, after the mac is restarted, even when I decide not to join his joined apps a former State of the saved request. I can't make changes to the dock, after restart it restores an old state. When I try to import or save something in any application you see normally last modified files, yet his watch an old state. When I try to delete files that I always put my password, it's new. Im confused, I'm a long-time os x user since 1999 has never had this kind of problems.

  Help, please.

  Lars

  Please, back up all data before proceeding.

  This procedure will unlock all your user (not system files) files and reset their ownership, permissions and default access controls. If you have voluntarily set special values for these attributes on any of your files, they will be be restored. In this case, either stop there, or be ready to recreate the settings if necessary. Do that after checking these settings that did not cause the problem. If none of that is meaningful to you, you need not worry about this, but do not follow the instructions below.

  Step 1

  If you have more than one user, and the one in question is not an administrator, then go to step 2.

  Triple-click anywhere in the next line to this page to select this option:

  sudo find ~ $TMPDIR.. -exec chflags -h nosappnd,noschg,nosunlnk,nouappnd,nouchg {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing Command + V. I tried these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  You will be asked your password of connection that are not displayed when you type. Type carefully, and then press return. You can get a warning to be careful. If you do not have a password, you will need to configure one before you can run the command. If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator.

  The command may take several minutes to run, depending on the number of files you have. Wait for a new line ending with a dollar sign ($) to appear, and then quit Terminal.

  Step 2 (optional)

  Take this step only if you have trouble with the phase 1, if you prefer not to consider, or if this does not resolve the problem.

  Start in recovery mode. You may be prompted to select a language, then the OS X Utilities appears.

  If you use FileVault 2, select disk utility, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Click the Open button in the toolbar and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. In this window, type this:

  resetp

  Press the tab key. The partial order you entered will automatically end this:

  resetpassword

  Press return. Opens a window to reset the password. You do not need to reset a password.

  Select your boot volume ("Macintosh HD", unless you have given it a different name) if not already selected.

  Select your username in the menu option allows you to select the account if not already selected.

  Under Reset Home Directory Permissions and ACLs, click the reset button.

  Select

  ▹ Restart 

  in the menu bar.

• Remove a problem after the app is available in the AppStore

  Hello, everyone,

  I want to know if it is possible to remove a problem after the approval of Apple. I have a multi-folio application and I don't want to remove the entire application, only one edition of it.

  Can someone help me?

  TKS a lot.

  Renata

  TKS a lot, Johannes!

• The streaming of Media Center PC on Xbox 360 problems after recent updates

  I've been streaming video of my Media Center PC on my Xbox 360 for about a month now.  I've never had problems until I installed the new update today.  Now I can listen to just a show for about 5 minutes then my PC freezes.  My configuration is:

  • Windows 7 (64-bit)
  • NVIDIA GTX295 1 GB video card
  • 8 GB of DDR2 memory

  If there is no additional info that could help please let me know.

  Thank you

  Robert

  Hello
   
   
  
  1. remember you number updates that you have installed?
  
  Method 1.
  Use the homegroup troubleshooter.
  a. Please open Control Panel and click on troubleshooting.
  b. click on "Network and Internet", then select the homegroup.
  c. troubleshooting tool find the cause and fix the problem? If this isn't the case, please move on next steps.
   
  Method 2.
  Check the following relevant services.
  a. click "Start", type "services.msc" (without the quotes) in the search bar and press ENTER.
  Note: If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  b. right click on the "Peer Networking Identity Manager" service and click Properties.
  c. Please click the Stop button to stop the service temporarily.
  d. access to the following folder:
  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking
  e. delete all files and folders inside.
  f. start the following service gain: Peer Networking Identity Manager
   
  Method 3.
  You can disable the anti-virus software and check if that causes this behavior.
  Temporarily disable the security software installed on the computer and check if the problem persists.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  Method 4.
  If the steps above do not better work that you can do is to perform a restore system just before the point where the problem occurred.
  I have listed a few articles that explain the system restore in Windows 7.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  
  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
   
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• YouTube problem after the update Safari 9.0.2

  After Safari 9.0.2 update I have a problem with Youtube viewing mode full-screen.
  After I chose the full-screen, video icon stay in small mode but screen resize black full screen.
  Before this update Youtube is reasonable for work.

  Chrome works well with no problem, if not his problem with the video hardware.

  Help, anyone?

  1 Delete Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  2 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

• HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

  Hi people!

  After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

  In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

  I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

  What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

  

  If you need more information, please let me know.

  Best regards

  Ty

  I just tried this driver and I still have sound after 6 resets.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

• Satellite Pro L850 - 1-8 - a few problems after the last update to BIOS version

  Hello.

  I have some problems after that the latest bios upgrade to version 6.80. First of all, I would like to note that Setup of HW does not work for me. I tried to use this tool to change the settings of the bios without success. This was done also by running this application with administrative privileges without success.

  The initial problem appeared after I tried to disable "open Panel - Power on" setting.
  This has been activated before the update bios and at some point I wanted to disable, because he gave me a nightmare when you carry because she would then put the computer in a bag.

  No matter how many times I tried to turn it off, it seems always enabled in HWsetup.
  Another feature that I can't edit's startup speed.
  It remains fast even if I tried to change to normal.

  I'm on Windows x 64 8.
  The case is now.

  GROUP OF EXPERTS
  HWsetup reports Open PANEL - PANEL as activated, while the Bios shows it off. It is indeed turned on and I could not turn it off. I even tried him for in the Bios and then try to disable in HWsetup, no change.
  STARTUP SPEED
  HWsetup startup speed related to 'NORMAL' but actually is 'FAST '. In the Bios, it reports its normal, but its easy to say to his FASTING in.

  My questions are.
  1. it can be the cause?
  2. How can I reset all of the values in the Bios to see if that fixes anything to start?
  3. is it possible to Flash the Bios with a version more old to see if this corrects the problems I have?

  I should also mention that 'System settings' has never worked for me. I get a message "Supervisor password check failed". Please note, there is no installed password.

  I will be grateful for any given solution. Thanks in advance.

  Can you please tell us which model of laptop you have exactly (the complete model name)?

• problems after the automatic updates

  I have Pavilion g7-2235dx with Windows 8.1 operating system. Almost all automatic up-to-date mess to the top of my ability to get on the internet. The only way I can connect is to uninstall all updates. The icons on my desktop has also stopped working. When I click it, it will immediately on the desktop. Cannot pin them to the taskbar either. Those on the taskbar does not open by clicking on them either. Have to click straight and say to open. Also problem get my Norton antivirus to open. Says it works but can not open it.

  Hello
  
  It might be, the upgrade to Windows 8.1. I've seen people with complications get the upgrade to go "smoothly".
  
  You can try, do a system update that would take you back to Windows 8. See if you have the same problems after updates.
  
  If you choose to update again, make sure that everything is already successfully updated.

• Major problems after the update to 10.11.2

  Hello

  I have a 2009 MacBook pro environment. I'vewalkways updated to the latest osx and have never had any problems. Since the update to El Capitan my computer worked really slow. I deleted all the old files, uninstalled I don't use and move all the files on a hard drive current of the program. With the first update to El Capitan, it would take 10 minutes to activate and load up, slow but manageable.

  Since the 10.11.2, update I have been practically impossible to use my computer at all. Now, it takes 25 minutes to activate and load up. Once its loading I can barely click an icon before her color of the wheels. It will charge finally something at the end of 5 minutes, but basically the computer is useless.

  IM wondering if anyone else has had similar with El Capitan and the problems that people would be advice to me. I plan to downgrade to Yosemite, as I had no problem then, but I've never done anything like this before, and I'm worried it will more mess my computer and then I will have no computer at all? I need to create a USB key with Yosemite on and then erase the Mac HD before reinstalling with Yosemite. I am naturally cautious but want to do what's best for my computer working again.

  Or would it be best to reinstall El Capitan and hope this sorts the problem?

  Thanks in advance

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

• Outlook 2007 POP3 problems after the installation of security updates

  After the updates of security for December 2010 has been installed on my computer, my Gmail POP3 does not. My access code are rejected.

  The i uninstall KB2288953 and after this operation bit is working again.

  See...

  • Microsoft Outlook 2007 may have problems to send/receive or performance after a recent update has been installed on the computer (17 Dec-10)
    http://support.Microsoft.com/kb/2485531

• A lot of problems after the update of February 11 Vista

  After February 11, day, my printer drivers disappear, I can use is more remote access Quickbooks, IE 7 freezes and my graphics, crash programs or refuse opening the files.  What the devil did this update?  By Cisco (remote access) tells me that there is nothing they can do, that recent update of Microsoft took my computer that is incompatible with their program and they suggest to change to Windows XP. Why, why, why Microsoft? Y at - it solutions?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!

• You tube problems and streaming video. System keeps the buffering, plays for a few seconds and starts the buffering all over again. Why and how can I fix

  On My Space, I can't watch/listen to the music streaming video and is similarly on YouTube.  The problem is persistent in all media streaming.  Videos open, play for a few seconds, then start buffering again. Why (?) How can this be fixed (?)

  Hello Maria,.

  Did you ever end up installing Silverlight or Flash?
  You can download and install the latest versions of both these sites:
  http://www.Silverlight.NET/
  http://get.Adobe.com/flashplayer/