String CTRL

Similar Questions

• Qt Creator 3.0 as an alternative to Momentics

  Hello

  is anyone using Qt Creator to create stunts app? It is possible since version 3.0. I tried shortly after the exit and realized that it works. There however not e. g. seized semiautomatic for Cascades classes in code QML. He is also unable to highlight typos. I think that it shouldn't be so hard to make this work.

  Apart from that, I think that Qt Creator is much more convenient than Momentics IDE. For example, all shortcuts work as expected (F3 to find a string, Ctrl + Tab to switch between editors...)

  No one answered my major problem with QCompass, so I have to answer me:

  In this case, it was useful to compare the Makefile generated by Qt Creator to the Makefile generated by Momentics. I was copying the lines of the latter to the former, and rebuild the project. In this way, I was able to overcome the differences down to a single one that was causing the problem:

  -DQ_OS_BLACKBERRY on the line starting by SETS

  I added the definition of file *.pro and now everything works fine.

• Select several areas to clear the overlay of B & W.

  I use cs6 now and then, nothing special, just the odd messing around with youtube tutorials. I would like to know if there is a faster way to do the following: I took a picture at the Eden project, loads of roses. I put on a superposition of B & W and spent a LOT of time to erase the real roses so just displays red. Is there a better way to do this? My shoulders were properly seized upward once I was finished (more to do with my configuration/posture) but the effect was beautiful, but of course, I want to do this kind of things faster next time. Thank you very much.

  A good way to proceed would be to convert the document to L * A * B * space, color or make a duplicate of the file and convert it. All you need to do is create an alpha channel for a mask, so I normally make a copy of the file, so I'm not changing converted the original image.

  Go to the channels palette and select the channel either A or B - one who makes the roses stand out the best. Usage levels to increase the contrast.

  Back in your original image, copy the layer alpha to your B & W adjustment layer mask (copy and past or use apply image).

  Original image:

  

  Copy the image and convert it into L * A * B *, select A channel:

  

  Duplicate a channel and adjust the contrast - it will not be perfect, but it will be closed:

  Reverse the string ctrl/cmd-i:

  Use apply image to apply the string in the file copy to the layer mask in the original file. Tap up to according to the needs:

• Oracle SQL Developer 3.0: Debugging of PL/SQL anonymous blocks: ISSUES

  Hello
  I just downloaded the Oracle SQL Developer 3.0. I used EA versions because they have emerged and was happy to see the final version. So I immediately tried to debug an anonymous block (something I was not looking to do in EA versions) and nothing happened.
  
  The "Debug" is grayed out and the string 'ctrl-SHIFT-F10' key did nothing. I found this forum:
  Re: 30EA1: debugging of anonymous block?
  and Vadim Tropashko follow-up advice. This has nothing to my anonymous block but has worked well for a simple example.
  
  So I started to whittle my anonymous block to the bottom to find the culprit, here's a breaking point repeatable for me:

  declare
      stmt1 long;
      stmt2 long;
      stmt3 long;
      stmt4 long;
      p_data varchar2( 500 );
      i      varchar2( 10 );
  BEGIN
      STMT1 := 1;
      STMT2 := 1;
      STMT3 := 1;
      STMT4 := 1;
      
      --the moment this is in the block "Debug" is no longer an option
       select
          SendDocumentResult
         into
          p_data
         from
          XMLTABLE( '/data' 
                  PASSING 
                  xmltype.createxml( '<?xml version="1.0" encoding="utf-8"?><data><SendDocumentResult>test</SendDocumentResult></data>' ) 
                  COLUMNS SendDocumentResult varchar2( 1000 ) PATH 'SendDocumentResult' ) ;
  end;

  The moment that I SELECT INTO... XMLTABLE() it fails (a normal SELECT INTO works very well).
  
  Is this a problem with my environment or there's a problem with SQL Developer 3.0.04. Overlooking the comments of K, it seems that debugging has worked for 'simple' blocks, so I wonder if it's just out of reach...
  
  My environment:

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production     
  PL/SQL Release 11.2.0.1.0 - Production                                           
  CORE     11.2.0.1.0     Production                                                         
  TNS for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production                
  NLSRTL Version 11.2.0.1.0 - Production
  
  and Oracle SQL Developer
  3.0.04 (Buld Main 04.34 with bundled Java) on a Window's XP box.

  The analysis has been the problem indeed. Can offer no alternative workaround, that packing horror XML in a view.

• How to find a complete workspace for a text string in flash builder 4.7?  It used to be ctrl shift f, but that no longer works.

  I just upgraded to Flash Builder 4.0 to 4.7.  I used to be able to search my entire workspace using Ctrl + Shift + f, but now, it works as a kind of text formatter.  How do I do this in 4.7?

  Thanks for your help.

  I don't know no shortcut direct to find the space of entire work, but you can try to use Ctrl-h, he calls a dialog search, from here you can set your search box, for example, workspace or set your game.

• Why does firefox open a non-stop tab string when I try to open a PDF file?

  I don't know if it's a coincidence, but right after that I installed the latest version of Adobe flash player, firefox now opens a string with no end of new tabs, whenever I try to open a PDF file. I have to close the window and start over.

  Help?

  the machine is a HP Elitebook 8540w. Windows 7 64-bit.

  You have configured Firefox to use the Adobe Acrobat plugin? It seems that he may be missing or disabled, because it does not appear in your "more details of the system" (next to your message). You can see the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, look for Adobe Acrobat. It may be down on a gray background.

  If you don't have it: Make sure that this isn't your favorite here player:

  "3-bar" menu button (or tools) > Options > Applications

  You can type or paste pdf in the search box at the top of the list after loading to filter.

  If you have it, but it cannot be activated using 'Always enable' or "Ask to activate": You may need to update. I recommend using the help inside your product Adobe (Reader or Acrobat) menu to check the updates.

  Any progress?

• Why all my keyboard shortcuts use the 'Alt' key instead of the ' CTRL '? I use Windows 7 and Firefox 5.0.1.

  I recently downloaded Firefox 5 and noticed that all my keyboard shortcuts by default using the 'Alt' key instead of the 'Ctrl' key (so, for example, open a new tab is Alt + T instead of Ctrl + T).

  I noticed that this applies even to copy and paste in Firefox (Alt + C and Alt + P is the only commands that work).

  No idea why this is happening? I am running Windows 7 and Firefox 5.0.1.

  I had this problem. I found that a roaming profile directory has been installed which contained a user.js file in which changed the hotkey of CTRL ALT.
  I deleted the profile folder a name randomly in c:/Users / [myuser] / AppData/Roaming/Mozilla/Firefox/Profiles and then I stuck to that of c:/Users / [myuser] / AppData/Local/Mozilla/Firefox/Profiles.

  This bad user.js file was some other parameters, including the definition of the user agent string
  "Mozilla/5.0 (X 11;" U; Linux i686; en-US; RV:1.0.0; (Salut, maman) gecko/20020604 "

  The user.js file is (or similar to) those listed here: https://www-archive.mozilla.org/unix/customizing.html

• How do I change Google to DuckDuckGo when you CTRL + K or CTRL + J? (I have already changed the about: config > keyword.url)

  Hello. I have something I want to change the default behavior, but I can't do it.

  Here's what I want to do: I want to change www.google.com to www.duckduckgo.com. However, when I do CTRL + J or CTRL + K he continues to send me on www.google.com.

  Here's what I did: I found that the search bar is now useless. Indeed, the "awesome bar" is so awesome that I have basically need the bar more research. Thus, for a long time, I took it.

  There is only an advantage. When the search bar disappeared, the shortcut which was to place the cursor on the search bar got another behavior. When I use CTRL + K (CTRL + J), the page would automatically change to www.google.com.

  I liked this behavior, because at the time, I used google as my search engine.

  But now I want to duckduckgo, I'm kind of embarrassed by it, especially since I cannot change this behavior. I have re-enabled the search bar and changed the search option above to DuckDuckGo, in hopes that will change behavior. He did not.

  In addition, as DuckDuckGo has said, I changed on: config keyword.url and keyword.enable.

  But I still have the www.google.com when I press CTRL + K/J

  I asked the question to my stream of Diaspora ( http://diasp.org ) and was able to get a solution in the day. Go figure. Before doing this, you will already have DuckDuckGo added to your list of search engine (in the drop box).

  Here is the solution. With the permission of ilyse na' IMO kazar

  in the subject location bar: config. You will need to confirm when you are advised that «this will void your warranty» You will see a bunch of preferences which, if you have never done this before, you never imagined exist under the hood of the FF.

  In the filter bar type browser.search.defaultenginename. In the column 'Value', says Google. Double-click the word Google and a dialog appears allowing you to specify the default engine again. TypeRegeditdans DuckDuckGo exactly as it appears in the drop-down search engines available in your browser. On my Mac the magic string is "DuckDuckGo (SSL)" without the quotes.

  About: config and check it, out worked for me!

• Bug: Find/replace does not work if the statement contains the string is too long

  Hello

  in my sequence, I press Ctrl + F to open the Find dialog box and enter a string. All the checkboxes are checked 'Elements for search' and ' limit the search to "is not enabled.

  Now comes the finding it is only announcing the discovery in the main sequence.

  Other places in a sous-suite that are part of a labview vi action setting is not in the list. Also if I open the sequence and I'm looking at this place.

  If I create a comment in the subsequence containing the searchstring, then it is.

  When I open the properties of the action of labview and open the parameter that contains the string and click on check for errors, and then close all and supplementary search then the value lies.

  Is it possible that the variable is too long setting? It's about 200 characters and one thing very nested SationGlobals and the table and the TestSockets. Search string Dees is finally an arrayindex in this grand statement.

  It seems that this is the problem.

  Is this a known bug?

  Solved.

  There was an empty character at the end of the search string...

• Find + replace text (string constant) does not work for screw Statechart module

  Hello

  I tried to do a mass find + replace a string in my code. Using Ctrl + F, LabVIEW 2012 correctly locates all the places where this string exists, including within the States transitions guards who have paths in this form:

  XYZ.lvsciagram.vi / Transition: Guard - diagram, Transition, data/part

  However, when I've specified that a replacement string, then click on 'Replace all', only 'normal' instances of screws replaced - instances in my diagrams had not changed.

  What is going on? Is there anything else I need to do?

  Thanks in advance.

  Looks like those that does not include how to find and replace is implemented in LabVIEW. You can try to replace just the statechart and see if that makes a difference, but it may simply not work.

• String with \t\n output

  Hello

  I'm trying to add my string of the report output, and the output of the channel is something like this..."...\t\n, akfjdakjf\n, jaiejfiaje\n." When the string is displayed in the report, it displays everything in one line (made in one long line). I would like the report to show as below...

  ajkfj

  ajfkd jkjfka

  fjka

  Very grateful for the help. Thank you ~.

  Could you please show us how you write the text in the report?

  Please note that if it is a string variable that you pass on, "\n" is a string static and not evaluated with respect to escape characters. So if you want to have a new line, the variable itself must include the new line, is not the "\n'-"command"for a new line...

  Tip: If you need a new manual line, you can insert one pressing Ctrl + Enter...

  hope this helps,

  Norbert

• How to programaticaly send a string to a box to modify another application

  Hello

  I have a question about how can an application send a string, representing a code bar, change the box (or text box) of a second application (no info on this app ctrl is available), which treats all bar codes. In addition, first application must ' press on ' a 'OK' button on the second application dialog box.

  First request, which will be written in CVI, begins by listing senior level windows, the function using Windows API - EnumWindows. Enumeration stops when the desired window's caption is found. A handle to this window will be available. I don't know how to find a handle for the control to change. There is no child window of this top-level window.

  Any suggestion on how to implement this is really appreciated.

  Concerning

  Hello all-

  @miniMe - I couldn't help but it should be noted from the information that the window you want to interact with is part of the installation of standard TestStand (modelsupport2), for which the source code is readily available.  Changing modelsupport2 is not for the faint of heart, your task is specific enough that I was able to accomplish with just a few lines of code (do not forget to copy the files from modelsupport2 to the public location before making changes).  Important components are below:

  The application that will send the number of the object to be measured can send the WM_COPYDATA message to the TestStand application.  With the help of this message is quite simple and allows you to pass data (for example a chain WEAR) beyond the limits of the process.  Here's the relevant part of my little test app that sent the message:

• The filter string and value some strin

  Hello!!! Alls

  I have a string code and I have messages and numbers, I want to filter in the chain, because I need graphic values

  Please help me!

  Thank you

  Hello

  If you have a string which you want digital data, you can use certain features of the range of the chain. For example, if you know the exact location of the numerica data in the string, you can use the String subset function (just specify the character in which we will start the research and the amount of characters to be read). Once you have the string, you can use the analysis of string function, which allows you to format the string to a numeric value that you can graph. I have attached the image of functions.

  

  You can find them in the channel Palette in the block diagram. If you want to know how they work, you can use help, by pressing Ctrl + H and by moving the mouse on the functions.

  I hope this is useful,

  Kind regards

• How can I put in a parameter to send the pair "CTRL + E '?

  Hello

  In my approach to RS232, I want to send the command above (CTRL + E).  How I write it in the parameter field?

  Thank you

  Rafi

  TS4.1

  Hey Rafi,

  Try Locals.str = "\x05".

  I have not tested, but it should work if you reference help on Index: string

  Jürgen

• Call data from Ctrl: Vals node

  I am trying to extract the individual elements of the Ctrl Vals invoke node.

  The front of the VI being called is a string and 4 double rooms:

  

  I am calling the VI and try to read the values as follows:

  

  The error I get is:

  

  Could someone please explain what I'm doing wrong here?  I want to just correct the 5 variables from the front of the VI (string and 4 double rooms).  I try to extract it as a cluster only because that context-sensitive help mentions that data Variant is a cluster.  I would ideally unbundle this as well, but I can't even the cluster again.

  The code is also incredibly simple, so I attached the VI.  If someone wants the acutal VI, I can attach it to a future post.  Everything I do called two nodes Invoke to run then get the values of the façade.  And finally try to extract the variables based on Variant type.

  The data type of "val Ctrl. Get all the ' is an array of clusters containing ctrl name (String) and ctrl (option) value.

  You can not (AFAIK) convert these data directly to a cluster of string and double rooms.

  Are the names (labels) and the called VI controls fixed and known data types? If they are, you can select each by name and convert the correct data type.

  I once stumbled on a VI (openG, I believe) who would get the data type of a Variant, but I can't find right now...