string does not update in the state machine

Similar Questions

• ORA-13754: 'SQL Tuning Set' 'string' does not exist for the user "sysman."

  ORA-13754: 'SQL Tuning Set' 'string' does not exist for the user "sysman."
  
  Hello
  in 10g R2 when I run the following in isqlplus I error of the United Nations:
  

  SELECT * FROM TABLE(DBMS_SQLTUNE.SELECT_SQLSET(
  'my_sql_tuning_set',
  '(disk_reads/buffer_gets) >= 0.05'));
  
  ORA-13754: "SQL Tuning Set"'my_sql_tuning_set" does not exist for user "sysman". 

  No problem if I run it as sys to sqlplus.
  
  Thanks for the help.
  
  How to activate for sys isqlplus?

  You are logged in as sysman,

  Check the user from the sql prompt.

  show user
  

• Elapsed time delay does that once in the state machine

  Hello.  I have problems using the delay to show the seconds remaining on an expectation not in a simple state machine.  I have a front panel countdown indicating the time remaining for the step.  I thought that the delay of elapsed time was the way to do.  The problem is the vi work correctly the first time.  But then after that the calendar does not seem to reset at the time I had put.  If I remove the delay and just stick a waiting time in the State, the vi is exhausted because I expect.  This is just to give the user an idea of the time remaining.  What I missing when using the passage of time, or it's just the wrong tool for the job?

  A small question, is that I would like to move the tasks, in this case the LED outside of the loop, so I don't have to repeat the code.  But when I tried moving them outside with only allow constants within the State, they do not work as I expected.  If you have tasks such as operating a set of Boolean values that you are used in several States, what is the the cleaner way to do it without repeating the code?

  Thanks for the help.

  See how it works for you.

• printer does not work in the windows machine 8

  my printer does not work in this new machine of windows 8. tried everything to fix the problem. It won't send email documents to the printer either. just doesn't get it. Ive had kodak install drivers, and just, it will not work on this computer. It was fine on windows vista. the printer is set by default on this computer, then why it wont work on this one. not happy with windows 8 at all. wish I never bought it

  Hello

  As Kodak OEM is responsible for the good operation of the printer and their
  drivers provided. Check their documentation online, with the support of Kodak, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Kodak - printers
  http://support.en.kodak.com/app/home/src/gosupport/selected/true

  Kodak - Support and downloads
  http://support.kodak.com/app/intfSel/intf_redirect/L2FwcC9ob21lL3NyYy9nb3N1cHBvcnQvc2VsZWN0ZWQvdHJ1ZS9jaGFuZ2UvdHJ1ZS9vcmlnX2ludGYva29kYWtfYjJjX2Vu/change_country/true

  ====================================================

  The main issue is probably the drivers, but these can help:

  Windows 8 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8 - How to troubleshoot printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8 - find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why the cloud does not update me the latest version of id on my mac osx 10.9.5?

  It stopped Id CC 2015 version, and does not show me the upgrade to version CC 2015.4.
  

  My colleagues have the PC and can Download it.

  TAGLIUZ I have not seen a similar mistake before.  I would recommend showing the screenshot to your I.T. Department administrator.  Maybe they have limited access to Java on the image you provided?

  If you have a creative cloud for team or company account your Department I.T. can submit a request for assistance from Adobe directly with the configuration of the computer through their dashboard.

• Old PhotoDeluxe does not work on the XP machine

  I have a version of PhotoDeluxe (2.0) I've been using since I got Windows 98. I have a lot of images in the format it is, I enjoyed using it. I am now using Windows XP, I run it on other XP machines. When I try to run it on my current computer I get an error "There is not enough memory (RAM live) to launch PhotoDeluxe."

  I tried, unsuccessfully to install updates (4.0 and 3.0) does not. What must I do to get a version of PhotoDeluxe running on my computer?

  It looks like another user has the same difficulties in 2007.  You could try the solution detailed in 02.Markus http://www.techsupportforum.com/forums/f159/photodeluxe-error-not-enough-ram-resolved-1619 html.  Apparently, you need to change your virtual memory settings.

• I can fax, but the date does not appear on the fax machine, the display or confirmation. need information for fix

  HP7500A printer, just bought. Works very well except for the date. Because I must have proof of fax sending, it does not work.

  Hi Mbailey212,

  You have the date and time on the machine itself? to do:

  Go to the front screen of the printer and make sure that the printer screen is on the home screen, if it is not, the light house at the top left lights. If so, touch and it will take you to the home page, then right arrow once and select settings, scroll to preferences and select it. At the top you should see the date and time, select this option and enter the date and time.

  I would like to know if this helps or not.

• GridItemRenderer does not update on the updating of the data

  I have a DataGrid with 4 columns, 3 using GridItemRenderer.  The data to the DataGrid control are divided into a number of pages depending on the size of the grid and the amount of data.

  The last 2 GridItemRenderers use a custom component that draws a percentage with the amount of the percentage bar.

  

  When the DataGrid control is imagined, work of GridItemRenderer of the 1st great column.  It changes color based on a value.

  The 2 last GridItemRenderers do not display anything.  When you click on the second page, it displays, however the first line does not show the value of the text.  When you click on another page, then the previous pages drawing values cover the current values.  that is, he draws the percentage bar based on the values of the previous line.

  Initial page

  The 3rd column is empty.  I tried to put the percentage bar drawing information directly in the GridItemRenderer, but it appears that for the first row.

  

  Second Page

  When loading the second page, it shows the bars, however, the values are disabled.  The red in the 100% bar is for another bar.

  

  First Page Reloaded after click navigation

  Navigate to the first page only gives wrong results as well.  The first line is missing in the percentage value.

  

  The GridItemRenderer is quite simple.  I overrid data function to add information.  I even tried a few Invalidate methods to see if that might solve the problem.  There can be no.

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:GridItemRenderer ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx".

  xmlns:DeanLogic = "com. DeanLogic.*.

  Width = "100%" height = "100%" >

  < fx:Script >

  <! [CDATA]

  override public function set data(value:Object):void {}

  Super.Data = value;

  if(value == null) {}

  return;

  } else {}

  var thisPercentage:Number = new Number (data ["CurrentMonthPercentage"]);

  monthBar.setBar (Math.floor(this.height *.99), Math.floor(this.width *.99), thisPercentage);

  }

  super.invalidateDisplayList ();

  super.invalidateProperties ();

  }

  []] >

  < / fx:Script >

  < DeanLogic:PercentBar id = "monthBar" / >

  < / s:GridItemRenderer >

  I decided to just use FlexGlobals to solve the problem.

  Overall, I put the width and height values.  By default the height and the width is after that the screen's size.

  dataGridColumnWidth = Math.floor (siteDataGrid.width *. 25);

  Then, in the DataItemRenderer, I used the FlexGlobals for the height and width.  I left the if statement else in there, just in case there is a solution.  But I probably should get out.

  Import mx.core.FlexGlobals;

  override public function set data(value:Object):void {}
  Super.Data = value;

  if(value == null) {}
  return;
  } else {}
  var thisPercentage:Number = new Number (data ["SevenDayPercentage"]);
  If (this.height! = 0 & this.width! = 0) {}
  sevenDayBar.setBar (Math.floor(this.height *.99), Math.floor(this.width *.99), thisPercentage);
  } else {}
  sevenDayBar.setBar (Math.floor (FlexGlobals.topLevelApplication.dataGridRowHeight *. 99), Math.floor(FlexGlobals.topLevelApplication.dataGridColumnWidth *.99), thisPercentage);
  }
   
  }

  super.invalidateDisplayList ();
  super.invalidateProperties ();
  }

• backkey does not work after the state change

  Hello

  I have a simple vision containing a "Channels" list in the State and a histogram in State "Charts".

  This point of view has an assigned custom backkeyhandler that simply changes the status back to 'Channels' if backkey material has been activated in mode "Charts".

  The application starts and presents two items in his list.

  If I touch one of the its entry, I load the data for this article and change the "Charts" view that displays the bar graph.

  By pressing the previous button does nothing in the emulator and brings back me to the homescreen on my nexus s.

  But if I touch the graph bars once before pressing the previous button, it takes back me to the State "Charts".

  Using the debugger with a breakpoint in the confirmed following function, this function will be not be called after a state change if I don't touch the graph bar.

  If it is possible to use two views for the presentation of the list and graphics, I need the backkey to work in different States, because I want to use the States to

  use different layouts for tablets vs phones.

  Any ideas?

  Michael

  protected

  function view1_backKeyPressedHandler(event:FlexEvent): Sub

  {

  TODO self-generating method stub

  if (currentState == 'Charts' ) {}

  Event.preventDefault ();

  setCurrentState)

  'Channels' );

  }

  }

  Hey,.

  The problem is that the focus of the scene is directed to the list, once it has been removed from the display list.  Here's what happens:

  1) tap on the item "Item 1."

  (2) stage.focus is automatically set to this article

  (3) change the graphics state

  (4) list is removed from the display list

  5) press return

  (6) no event is triggered because of the list has the focus but is not on the display list

  To work around this problem, set to null stage.focus just after changing state.  If your list change manager would look like this:

  protected function list1_changeHandler(event:IndexChangeEvent):void

  {

  setCurrentState ("Charts");

  internship. Focus = null;

  }

  In my internal tests with 4.5.1 this solves your problems.

  Let me know if this does not work.

  Chiedo

• Quick drop-down list does not update during the search

  My Quick Drop started acting today.  Normally, when I start typing, the list under the search box updates to show all possible matches.  This is not is no longer the case.  He always tries to autocomplete the search field, but the list is not updated.  [attached screenshot]

  I'm under LabVIEW 2009 SP1 on Windows XP 32-bit.

  For what it's worth, LabVIEW crashed went on vacation early evening Wednesday last, just before I was preparing to leave for the weekend.  When I went back to work this morning, Quick Drop work properly.  I don't know if these two events are linked, but I thought it was a possibility.

  I tried to restart my PC and rename the file LabVIEW.ini and LabVIEW restarting with a new configuration, but not luck.

  Any help would be greatly appreciated!

  It seems that I solved the problem.

  Yesterday, I noticed that the Quick Drop worked when I took my laptop to my cubicle to a job in another location.  When I started my laptop in my closet this morning, however, the problems are back.  Apparently, the problem was related to the use of the docking station for my laptop.  Something in the configuration to the hardware profile 'anchored' have been corrupted, causing the problem Quick Drop, among other buggy problems (for example, do not allow me to click and drag the mouse to highlight text).  I unplugged the laptop from the docking station, and suddenly everything worked very well.  Once I reconnected it the laptop to the docking station, it was apparently crushing the hardware profile "anchored" corrupt, because the next time I start the computer when you are connected to the docking station, everything has worked.

  Problem solved!

• Bug: Find/replace does not work if the statement contains the string is too long

  Hello

  in my sequence, I press Ctrl + F to open the Find dialog box and enter a string. All the checkboxes are checked 'Elements for search' and ' limit the search to "is not enabled.

  Now comes the finding it is only announcing the discovery in the main sequence.

  Other places in a sous-suite that are part of a labview vi action setting is not in the list. Also if I open the sequence and I'm looking at this place.

  If I create a comment in the subsequence containing the searchstring, then it is.

  When I open the properties of the action of labview and open the parameter that contains the string and click on check for errors, and then close all and supplementary search then the value lies.

  Is it possible that the variable is too long setting? It's about 200 characters and one thing very nested SationGlobals and the table and the TestSockets. Search string Dees is finally an arrayindex in this grand statement.

  It seems that this is the problem.

  Is this a known bug?

  Solved.

  There was an empty character at the end of the search string...

• Line update does not update in the data of table view

  Hello
  
  I have Developer SQL 3.0.04 running on Windows XP.
  
  In the view of the table (Data tab) of the SENSOR table, after update of a line, I do not see the change. It's always the old value that is displayed. I managed to see if the table has been updated and it has been on sqlplus. After 'engage', I could see the same thing.
  
  The update statement has been:
  
  UPDATE safege.sensor SET lastacq = (select max (raw_date) of safege.msr_3566) where cmt = "W090QR01M002."
  
  And I got the answer "1 line Update". But when I look at I can't see the changes, still the old value.
  
  I tried to select
  Select lastacq from the probe where cmt = "W090QR01M003."
  and I could see that the change was made
  
  It was only after the closing of the view table and reopening, I could see the change presented in this table.
  
  It is a big problem for me because if I can't trust what I see under Developer slq, then I doubt on what I'm doing, if I'm really updating the table or what.
  
  
  Thank your for your entry.
  
  Christian

  I've seen a few bugs with 3.0.x, but I'm not sure you hit a bug. I have woked with 3.1 and 2.x versions and I didn't see this problem.
  Try to use the 3.1.x or 2.x version, I hope it is and must solve the problem.

  Kind regards
  http://www.oracleracexpert.com
  RMAN Oracle 11 g new features
  http://www.oracleracexpert.com/2011/12/Oracle-recovery-managerrman-new.html

• document bookmarks (and perhaps others) does not update in the profile folder

  As part of my Firefox profile place so that I could support up to Mozy, I discovered that the Firefox document that contains my favorite, located in C:\Documents and Settings\Application Data\Mozilla\Firefox\Profiles\779klznm.default, is not up-to-date. Nor is the Firefox containing bookmarks located in C:\Documents and Data\Mozilla\Firefox\Profiles\default.s9s Settings\Application up-to-date.
  When my browser is open, the bookmarks that I see when I click on the bookmarks are updated. Why that doesn't appear in my profile? And, if my favorites are not up-to-date in my profile, I wonder what else is not up-to-date, such as my search engines, modules, etc.
  I also tried to save in my library of favorites, but backups come on on my desk in JSON format.

  Can someone please tell me what to do to make sure that all my Firefox settings are up-to-date in my profile?

  Thank you
  Ellen

  Correct at the time.

• HP Total Care Health Check does not update all the software needed

  I buy just a dv5-1235 of Best Buy.  I opted against the installation of the Geek Squad so that I could 'get to know' my computer better.  I've burned the recovery disks, then ran HP Total Care 'health check '.  He did update a decent number of programs, but there are still a few updates that I found on the HP support site.  especially for the resident TV MediaSmart update 1a.  I found that in another thread because this would interrupt answer shortly after reboot.

  I'm missing something on the health check.  Should he check the updates on all the stuff "HP" or is this something to check first, then go to the HP site to double check?

  This is my first post in this forum so I used the search function to see if there are similar topics, but I do not see.  Not to say that they aren't there, but after a quick search I do not see.

  So far, my birthday gift for me works MUCH better than my old laptop, a dell since 2001.  :-)

  Advice would be appreciated.

  HP TCA (Total Care Advisor) is bug, use it with caution.  Many of us turned off and check the updates on our own.

• LR does not update changed the EXIF data

  I imported a bunch of photos of LR and subsequently added to GPS information for raw files using Canon card utility. The GPS info is there (I checked in the dialog box information on the file in the Finder), but LR doesn't! I don't mind reimport the files to get the GPS data that is recognized, but it seems that the only way to do is to remove the images from the catalog, which means losing the settings that I already had on them. Y at - it an option to update the EXIF data in LR without this drastic measure?

  Then select one of the photos to which you've added the GPS data and make metadata > read metadata file.   This will read the metadata to raw files in the LR catalog without losing your changes. but any changes you have made in metadata in LR - words - keys, legend, - will be lost.

  Going further, why not use module card LR instead?

  In addition, if you have never metadata > save metadata to file, or your turn on the option changes automatically write in XMP, then for these photos, LR metadata read/write from sidecar .xmp file (a file with the same base name of that image, but with the .xmp extension), rather than the file raw itself.

  In addition, many people are also wary of editing raw files, because each manufacturer has its own format owner (so the reason of .xmp sidecar).  In your case, no doubt you use utility of Canon to change the Canon raw files, while the risk is mitigated.