String error 42 - VI method for controls server Unflatten
Try to use the VI-server method to save and retrieve values from control. Get a generic error 42 when using the name "minimum value" but the Vi works fine if you use a name "minimum values" conrol Vi clos can pass (using S1) between two control names to show that the error is in the difference in name. Is there a way to solve the problem or if another method to save and retrieve orders be used.
Attached VI is in LV2010 sp1.
Thanks for your help.
One thing you can try is to disable the option "Convert EOL" functions to write to a file text and reading of text file. As you save binary data as a string, you want to ensure that binary data is stored. It may be better to use the binaries, instead of text files, because you are trying to save and load binary data.
Chris M
Tags: NI Software
Similar Questions
-
Method for controlling battery Microsoft acpi disables my battery on update.
Hello
I work with a Lenovo Y530 computer laptop (ab00216104). After a few years, the battery ceased to maintain a charge so I ordered a new third party like Lenovo temporarily stopped selling them. The new battery worked fine at first but, after a few minutes I get the message "battery plugged in, does not support" of the battery lower-left icon. It just stops charging the battery, but it will take place off the coast of the battery until it is unloaded. At first, I thought it was a bad battery however by many trial and error, I discovered the battery works fine. Let me explain.If I uninstall "control method battery compatible acpi Microsoft" in the Device Manager and reboot my computer with my card wireless off then the battery will work perfectly. It is not up to what I connect to the internet that it suddenly stops to load again. It is in the case once my computer is able to access to the internet and update of "control method battery compatible acpi Microsoft" that the problem occurs.
As much, as I know there is no way to prevent it from updating once he establishes a connection and no way for "rolling back drivers" as long as this option is grayed out. I would be very happy any advice on this situation, thank you.Hello
I suggest you to perform the following methods.
Method 1:
To enable or disable Windows Update driver manually on a single computer to research
- Click Start, right-click computer, and then click Properties.
- In the tasks list, click Advanced system settings.
- On the System Properties dialog box, click the hardware tab, and then click Windows Update driver settings.
- Select never check for drivers when I connect a device.
- Click OK twice, and then close the System dialog box.
Method 2: install the latest drivers for chipset for laptop and the Coachman.
If the problem persists, contact Lenovo support for assistance.
Hope this helps!
-
I installed Windows Server 2008 R2 Standard as a test version of an iso download got on the product site in Ms. In the meantime, I bought the software. Once the software has been delivered, I tried to activate with the key provided me with the software sent from Microsoft. I get... "the activation server determined that the specified product key is used" and throws the error asOxC004C003code. What gives here? They just sent me the key? I need to get this fixed as soon as POSSIBLE.
Here is the Vista Forums.
http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx
They will help you in the above Forums Windows Server 2008.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Here's what that means for Vista:
http://support.Microsoft.com/kb/951287/en-us
0xC004C003 error code
The activation server determined that the specific product key is in use.This error code indicates that the product key you entered has already been activated, and you have to get a different product key.
See you soon.
Mick Murphy - Microsoft partner
-
Simple method for another server videos
I am a newbie to FMS and I tried searching forums, as well as Googling to do this, so please forgive my ignorance.
I've got:
-Already installed FMS on XP with IIS server
-Video FLV, residing in a folder on another server
How do I:
Videos of the other server where are the videos?
Thank you!
Please see: network folders mapping drives on this page - http://help.adobe.com/en_US/FlashMediaServer/3.5_AdminGuide/WS5b3ccc516d4fbf351e63e3d119f2 925e64 - 7fc7.html -it might be useful
-
Hi all
I have a data file where there is a wcm:element like below
< wcm:element = "linkUrl" name > [!-$wcmUrl ('resource', ")-] < /wcm:element>
So, I get an exception to content server
Event generated by the user 'sysadmin' to host 'CIS '. Could not generate the HTML page. Unable to evaluate the function. Error running system. wcmUrl cannot run the "evaluateScriptEx" of service method. The server script expression evaluates error. No path required for the ssWeblayoutUrl parameter. [Details]
An error has occurred. The stack trace below shows more information.
!csUserEventMessage,sysadmin,CIS!$!csPageMergerUnableToGenerateHtmlPage!csDynHTMLSystemExecutionError,csDynHTMLReportMsgFunction!$wcmUrl!csUnableToExecMethod,evaluateScriptEx!csDynHTMLServerScriptEvalError!$Missing required path parameter for ssWeblayoutUrl.
intradoc.common.ServiceException:! csPageMergerUnableToGenerateHtmlPage
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2271)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2265)
at intradoc.server.Service.createServiceException(Service.java:2260)
at intradoc.server.Service.buildResponsePage(Service.java:1314)
at intradoc.server.Service.doResponse(Service.java:2076)
at intradoc.server.FileService.doResponse(FileService.java:1469)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:802)
at intradoc.server.Service.doRequest(Service.java:1890)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.io.IOException:! csDynHTMLSystemExecutionError, csDynHTMLReportMsgFunction! $wcmUrl
at intradoc.common.DynamicHtmlMerger.createIOException(DynamicHtmlMerger.java:2588)
at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:1202)
at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)
at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)
at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)
at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)
at intradoc.common.DynamicHtmlMerger.outputDynamicHtmlPage(DynamicHtmlMerger.java:2007)
at intradoc.server.Service.buildResponsePage(Service.java:1267)
... more than 10
Caused by: intradoc.common.ServiceException:! csUnableToExecMethod, evaluateScriptEx
* ScriptStack! csDynHTMLStackDumpStart, sysadmin, (datasummary) IdcService is SSXA_GET_DATAFILE\, dDocName = 00151164\, = 209607 dID! $
! csDynHTMLNoStack! $
!csDynHTMLErrorMessage,/oracle/ecm/ucm_domain/ucm/cs/weblayout/groups/public/@global/documents//mdaw/mtux/~edisp/00151164~2.xml.parsed,9,40!csDynHTMLSystemExecutionError,csDynHTMLReportMsgFunction!$wcmUrl!$
-& #62; & #60; WCM:element name = "linkUrl" & #62; [(--\!--$wcmUrl('resource'\, '')]; & lt; / span & gt; & #60; / wcm:element & #62;
in sitestudio. SSClassHelper.invoke (unknown Source)
in sitestudio. SSScriptExtensions.evaluateIncludeXmlEx (unknown Source)
in sitestudio. SSWCMScriptExtensions.resolveWcmUrl (unknown Source)
in sitestudio. SSWCMScriptExtensions.evaluateFunction (unknown Source)
at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)
at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)
... more than 17
Caused by: java.io.IOException:! csDynHTMLServerScriptEvalError
at intradoc.common.DynamicHtmlMerger.createIOException(DynamicHtmlMerger.java:2588)
at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:1202)
at intradoc.common.DynamicHtmlMerger.substituteVariable(DynamicHtmlMerger.java:623)
at intradoc.common.DynamicHtml.substituteVariable(DynamicHtml.java:1394)
at intradoc.common.DynamicHtml.outputHtmlEx(DynamicHtml.java:1110)
at intradoc.common.DynamicHtml.outputHtmlFromStart(DynamicHtml.java:1020)
at intradoc.common.DynamicHtml.outputHtml(DynamicHtml.java:991)
at intradoc.common.DynamicHtmlMerger.executeDynamicHtmlToWriter(DynamicHtmlMerger.java:2060)
at intradoc.common.DynamicHtmlMerger.evaluateScriptToWriter(DynamicHtmlMerger.java:1872)
at intradoc.common.DynamicHtmlMerger.evaluateScriptNoErrorHandling(DynamicHtmlMerger.java:1836)
at intradoc.common.DynamicHtmlMerger.evaluateScriptEx(DynamicHtmlMerger.java:1794)
at sun.reflect.GeneratedMethodAccessor500.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
in sitestudio. SSClassHelper.invokeRaw (unknown Source)
... 23 more
Caused by: intradoc.common.ServiceException: path of access is required for ssWeblayoutUrl parameter.
* ScriptStack! csDynHTMLStackDumpStart, sysadmin, (datasummary) IdcService is SSXA_GET_DATAFILE\, dDocName = 00151164\, = 209607 dID! $
! csDynHTMLStackElementWithFilename,wcmUrl,/oracle/ecm/ucm_domain/ucm/cs/weblayout/groups/public/@global/documents/generalmodule/mdaw/mtux/~edisp/00151164~2.xml.parsed,9,40!$
! csDynHTMLServerScriptEvalError
in sitestudio. SSScriptExtensions.evaluateFunction (unknown Source)
at intradoc.common.DynamicHtmlMerger.computeFunction(DynamicHtmlMerger.java:1430)
at intradoc.common.DynamicHtmlMerger.evaluateGrammarElement(DynamicHtmlMerger.java:908)
Therefore I don't see the placeholder to correct the link. How can I fix this, or at least manage the display of the placeholder.
Concerning
I don't think the resources without the dDocName specification will work (for example [!-$wcmUrl ('resource', ")-]).
At some point, the code path probably leaves the SiteStudio component and goes back to the core code WebCenter content to fetch the revision. It seems that it is where he meets a problem (impossible to find the last out for review).
If you turn on additional detailed complete tracking for site *, file * and system * this gives you a clues?
Jonathan
-
Services for SQL Server 2008 Express are not listed. No error message when installing.
Hello community,
I installed SQL Server Express 2008 (without SP but with SQL Management Studio) on a Windows XP 2002 SP3 32-bit. Used to install operating system user is a member of the administrator group
The SQLManagementStudio_x86_ENU.exe installation file was downloaded from http://www.microsoft.com/en-us/download/details.aspx?id=7593 . Express Edition has been selected during the installation. All prior checks have been adopted (with the exception of 1 and 2 does not apply). I chose this version with management tools that I will need them for a quick change at a later stage.Then I installed on SQLServer2008SP1-KB968369 - x 86 - ENU.exe, which is the general Service Pack 1 for SQL Server 2008, which has been downloaded from http://www.microsoft.com/en-us/download/details.aspx?id=20302. All prior checks have been adopted (with the exception of 1 and 2 does not apply). The installation window title was SQL Server Service Pack 1. In the step select the components, I had no other choice than the selection of shared components / basic management tools. To the right of the screen, it says "Express with Advanced Services" edition / Patch level: 10.0.1600.22
It ended with a message saying that your SQL Server 2008 upgrade completed successfully. The information contained in the mentioned log at the end of the installation displays no error message.
Here is the troubled part
Then I tried to install a different SW that has SQL Server 2008 SP1 as a sine qua non. What he did not. Then I rebooted and wanted to see what version was indeed installed.
Control Panel - Add/Remove software : 5 entries, Microsoft SQL Server 2005 backward compatibility / Microsoft SQL Server 2008 / Microsoft SQL Server 2008 Native Client / Microsoft SQL Server 2008 political / setup of Microsoft SQL Server 2008 supports files (no mention of SP1, can this be correct?)
Control Panel - Services : there is no service of any kind that has SQL Server on its behalf. This is very probably a major problem, a google for that advice that there should be more of them
Regedit - HKLM - SW-MS - MS SQL Server - 100 - Bootstrap Release - current Version : 10.1.2531.0 (Diffferent than SP1, think?)
Cmd - osql-u its Pei : named pipes provider: could not open a connection to SQL Server [2]. / Login timeout expiredI reboot several times since then.
I don't know the status of the installation before installing the SP1, I knew I'd need SP1 anyway.I suppose that services SQL Server issue resolved would be a big step forward.
Anyone has an idea on what I could check?
Thanks in advance, Laurent
SUPPORT IS LOCATED IN THE SQL SERVER FORUM:
http://social.msdn.Microsoft.com/forums/en/category/SQLServer -
Original title: Windows Update Failed - need help
Vista 32 Ultimate with all updates, until this one: update Windows failed: error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332). Update has failed repeatedly. I tried to restart, remove the update (even by deleting the file so it would download it again) and install again. Nothing has worked. Error 80070643. Since it is not Office 2003, the error seems to mean a problem with the Windows .NET framework. Don't know what that means.
Looking at KB976982, I tried to fix MSI software update registration corruption issues (whatever that means) by running the automated Fix It by KB971187. Restarted, I tried Windows Update again. Still didn't update.
Then, I waited two days and tried again. Even that did not help.
I tried bypassing Windows Update simply by downloading and then run the file SQLEXPR32.exe from Microsoft downloads. Did not work at all. I then tried to run it as an administrator (even if it was already an administrator account, with no other account on this computer at all). He started to run and then gave me the following error message: unable to run the SQL Server System Configuration Checker due configulation WMI on the computer. Error: 70347 (0x112cb).
Now I'm really confused. On the one hand, 80070643 means I probably repair the .NET framework, which certainly, I hate to do because I need several versions of the .NET framework first uninstall and then try to install the compmonents, and I'm afraid something would go wrong.
On the other hand, the 70347 (0x112cb) error message seems to indicate the problem is completely different and has to do with WMI, which probably has to do with permissions and I have no idea how to solve this problem. (And why it all of a sudden would be any problem with permissions?) This computer is not on a corporate network and has only one user account, the administrative account). I have looked at Services and Applications in computer management, where there are WMI control, but nothing shown that I can possibly change and not the SQL Server Configuration Manager under it, which doesn't seem to have much either.
Help! Please...
And now I also tried to fix it, just in case where, the .NET framework (Panel > programs and features > Microsift.NET framework Client profile 4 > uninstall/change > fix it), and the Windows Update tried again (including reboot). Still no. Everything I try, it is not to do nothing, pardon my language. People smarter than me, pleasehelp!
Hi stupID_,
«Error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332).» Update has failed repeatedly. »
As the error relates to SQL, perhaps this forum:
SQL Installation of Server & upgrade
http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.
-
Hello
I'm putting it on oracle 11.2.0.1 to 11.2.0.3 DB level but during DBUA, I got error
"ORA-00205: error in the identification of control files, check the log of alerts for more information.
I have check the alerts log in E:\app\kmahalingam\diag\rdbms\orcl\orcl\trace\alert_orcl.txt
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SNA system picked latch-free 3
With the help of LOG_ARCHIVE_DEST_1 parameter value by default as USE_DB_RECOVERY_FILE_DEST
Autotune undo retention is enabled.
IMODE = BR
ILAT = 51
LICENSE_MAX_USERS = 0
SYS audit is disabled
Commissioning:
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
With the options of partitioning, OLAP, Data Mining and Real Application Testing.
Windows NT Version V6.1 Service Pack 1
UC: 8 - type 8664, 8 physical cores
Process affinity: 0 x 0 x 0000000000000000
Memory (success/Total): Ph: 3241 M / 16383 M, Ph + FCP: 16565 M / 32765 M
Using parameters in spfile E:\APP\KMAHALINGAM\PRODUCT\11.2.0\DBHOME_2\DATABASE\SPFILEORCL server-side. ORA
Parameters of the system with default values:
process = 300
sessions = 472
memory_target = 3280M
control_files = 'E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL.
control_files = 'E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL.
DB_BLOCK_SIZE = 8192
compatible = "11.2.0.0.0."
db_recovery_file_dest = 'E:\app\kmahalingam\flash_recovery_area. '
db_recovery_file_dest_size = 3912M
undo_tablespace = 'UNDOTBS1.
Remote_login_passwordfile = "EXCLUSIVE."
db_domain = "cpg.com."
dispatchers = "(PROTOCOL=TCP) (SERVICE = orclXDB)" "
audit_file_dest = "E:\APP\KMAHALINGAM\ADMIN\ORCL\ADUMP".
AUDIT_TRAIL = 'NONE '.
db_name = "orcl".
open_cursors = 300
star_transformation_enabled = 'TRUE '.
diagnostic_dest = "E:\APP\KMAHALINGAM".
Fri Mar 07 00:33:15 2014
PMON started with pid = 2, OS id = 25072
Fri Mar 07 00:33:15 2014
PSP0 started with pid = 3, OS id = 25688
Fri Mar 07 00:33:16 2014
VKTM started with pid = 4, OS id = 27608 high priority
VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms
Fri Mar 07 00:33:16 2014
GEN0 started with pid = 5, OS id = 11484
Fri Mar 07 00:33:16 2014
DIAG started with pid = 6, OS id = 16980
Fri Mar 07 00:33:16 2014
DBRM started with pid = 7, OS id = 2200
Fri Mar 07 00:33:16 2014
DIA0 started with pid = 8, OS id = 8024
Fri Mar 07 00:33:16 2014
MA started with pid = 9, OS id = 15688
Fri Mar 07 00:33:16 2014
DBW0 started with pid = 10, OS id = 19908
Fri Mar 07 00:33:16 2014
LGWR started with pid = 11, OS id = 22616
Fri Mar 07 00:33:16 2014
CKPT started with pid = 12, OS id = 12828
Fri Mar 07 00:33:16 2014
SMON started with pid = 13, OS id = 10184
Fri Mar 07 00:33:16 2014
RECCE has started with pid = 14, OS id = 28984
Fri Mar 07 00:33:16 2014
MMON started with pid = 15, OS id = 22288
Fri Mar 07 00:33:16 2014
MMNL started with pid = 16, OS id = 12072
commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
commissioning or shared server 1...
Environment ORACLE_BASE = E:\app\kmahalingam
Fri Mar 07 00:33:16 2014
ALTER DATABASE MOUNT
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 marked during: ALTER DATABASE MOUNT...
Fri Mar 07 00:34:46 2014
ALTER DATABASE MOUNT
Fri Mar 07 00:34:46 2014
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 marked during: ALTER DATABASE MOUNT...
Fri Mar 07 00:45:51 2014
change the database editing
Fri Mar 07 00:45:51 2014
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 scored at the course: change the editing of the database...
Fri Mar 07 00:48:13 2014
change the database editing
Fri Mar 07 00:48:13 2014
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA-00210: could not open the specified control file
ORA-00202: control file: ' E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL'
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) the system cannot find the file specified.
ORA - 205 scored at the course: change the editing of the database...
Fri Mar 07 00:52:34 2014
Derives from detected time. Check the file path VKTM for more details.
Fri Mar 07 00:53:46 2014
Closure of proceedings (immediate)
Closure of proceedings: in addition to logons disabled
Stop background MMNL process
MMON background process stop
The high waters = 1 license
All dispatchers/dispatchers and shared servers stop
ALTER DATABASE CLOSE NORMAL
ORA-1507 marked during: ALTER DATABASE CLOSE NORMAL...
ARCH: Disabled archives due to the stop: 1089
Stop process to archive
Archiving is disabled
ARCH: Disabled archives due to the stop: 1089
Stop process to archive
Archiving is disabled
Fri Mar 07 00:53:49 2014
Stop background VKTM process
Fri Mar 07 00:53:51 2014
Instance shutdown complete
Fri Mar 07 00:54:01, 2014
Setting the default value of the parameter parallel_max_servers
320 to 285 because of the value of the process parameters (300)
Help, please
Thank you
According to spfile.
control_files = 'E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL01. CTL.
control_files = 'E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\CONTROL02. CTL.
You mentioned
Davinapochon wrote:
E:\APP\KMAHALINGAM\ORADATA\ORCL\CONTROL02. CTL file is there but there is no CONTROL01. CTL file.
So little confused here.
E:\APP\KMAHALINGAM\ORADATA\ORCL\--> must contain CONTROL01. CTL
E:\APP\KMAHALINGAM\FLASH_RECOVERY_AREA\ORCL\--> must contain CONTROL02. CTL
What is it now?
Anand
-
error in the identification of control for 11g update files...
No 64-bit RAC ASM OEL4 Oracle10gR2
Hi all
I try to update our data base to 11g and I get the following error when I try to start the database with the command START UPGRADE. I make a manual level and following the upgrade guide:
SQL > startup pfile='/opt/app/oracle/product/11.1.0/db_1/dbs/initFPRCTEMP.ora upgrade ';
ORACLE instance started.
Total System Global Area 4275781632 bytes
Bytes of size 2151248 fixed
2617248944 variable size bytes
1644167168 of database buffers bytes
Redo buffers 12214272 bytes
ORA-00205: error in the identification of control files, see log alerts for more information
When I checked the alertlog I found the following:
ORA-00210: could not open the specified control file
ORA-00202: control file: "+ FLASH1/fprctemp/controlfile/ctrl02_fprctemp.ctl".
* Ksfdopn:2-ORA-17503: could not open the file +FLASH1/fprctemp/controlfile/ctrl02_fprctemp.ctl*
ORA-15001: diskgroup "FLASH1" does not exist or is not mounted
ORA-15077: could not locate instance ASM serving a required diskgroup
ORA-29701: unable to connect to the Cluster Manager
ORA-00210: could not open the specified control file
ORA-00202: control file: "+ DATA1/fprctemp/controlfile/ctrl01_fprctemp.ctl".
* Ksfdopn:2-ORA-17503: could not open the file +DATA1/fprctemp/controlfile/ctrl01_fprctemp.ctl*
ORA-15001: diskgroup 'DATA1' does not exist or is not mounted
ORA-15077: could not locate instance ASM serving a required diskgroup
ORA-29701: unable to connect to the Cluster Manager
Thu Aug 28 14:54:49 2008
Running the Checker found 2 new failures of persistent data
ORA - 205 marked during: ALTER DATABASE MOUNT...
What's weird, is that I checked and the ASM instance is running. I checked all the environment variables (PATH and new home of 11g ORACLE_HOME) and I also put the oratab entry to point to the new home of the Oracle, as indicated in the documentation. Here are my entries in the .bash_profile file and the oratab file.
# .bash_profile
# Get the aliases and functions
If [~/.bashrc - f]; then
. ~/.bashrc
FI
# Specific programs startup and user environment
$PATH = path: $HOME/bin
stty erase ^ H
ORACLE_BASE = / opt/app/oracle
ORA_HTTP_HOME=/opt/app/Oracle/product/10.2.0/http_1
ORACLE_HOME=/opt/app/Oracle/product/11.1.0/Db_1
ORACLE_ASM_HOME=/opt/app/Oracle/product/10.2.0/asm_1
ORACLE_SID = FPRCTEMP
ORA_NLS10=$ORACLE_BASE/product/10.2.0/Db_1/NLS/data
TNS_ADMIN=$ORACLE_BASE/product/10.2.0/Db_1/network/admin
LD_LIBRARY_PATH=$ORACLE_BASE/product/11.1.0/Db_1/lib:$ORACLE_BASE/product/10.2.0/http_1/lib
TEMP = / tmp
export ORA_HTTP_HOME
export ORACLE_SID
export ORACLE_BASE
Export ORACLE_HOME
export ORACLE_ASM_HOME
export ORA_NLS10
Export TNS_ADMIN
export LD_LIBRARY_PATH
Export TMP
export of TEMP
username not defined
$PATH = path: $HOME/BIN: $ORACLE_HOME/bin: $ORACLE_HOME/OPatch: $ORA_HTTP_HOME/opmn/bin: $LD_LIBRARY_PATH
export PATH
umask 022
username not defined
the oratab file entry:
*:/opt/app/Oracle/product/10.2.0/http_1:N
+ASM:/opt/app/Oracle/product/10.2.0/asm_1:Y
FPRCTEMP:/opt/app/Oracle/product/11.1.0/Db_1:Y
Thanks to you all.HM... Please take a look at ML -Note: 337737.1 (I just mention the combinations with an 11 g database)-I noticed that you do not have a RAC installation but nevertheless you CSS running to your instance of the DSO.
CRS... ASM............ DB... Certified
------------------------------------------------
11.1___11.1___11.1___Y
11.1.___10.2___11.1___Y
11.1___10.1.0.3__11.1___YIf upgrading the ASM instance should first solve this problem. The upgrade of the ASM means: you stop your database running in ASM and upgrade ASM with the DBUA instance. It'll take a few minutes, because there is no dictionary database in ASM.
Kind regards
MikePublished by: Mike Dietrich on August 29, 2008 17:26
-
Error in the SMTP Configurations for File Server Resource Manager
Hello
Please help me how to configure SMTP for file server resource manager, when I have set up SMTP for gmail and godady e-mail I got the error.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do?
Hello
Your question is beyond the scope of these forums.
Please use the following links for that matter.
Network Infrastructure servers Forum:
http://social.technet.Microsoft.com/forums/EU/winserverNIS/threadsCategory of the Windows Server:
http://social.technet.Microsoft.com/forums/EU/category/WindowsServerConcerning
-
Do not install the update for SQL Server 2005 Service Pack 3 (KB970892) security code error C0000005
This update didn't install when I used Vista and is still unable to install now, I updated to Windows 7.
Have searched for a solution for months with no result. Reason why I updated.
Any help much appreciated.
DOUGY,
Microsoft SQL Server 2005 Express Edition Service Pack
Post here for assistance:
http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/
--
-
Update of security for sql server sp3 KB94981 fails with error 2B 33
Each update for SQL Server 2005 on my computer Vista Home Premuim fails. The most recent example is:
Update of security for sql server sp3 KB94981 fails with error 2B 33
for SP2, it was
Security for sql server sp2 KB960089 update fails with error 6AA
Other updates have been ad are successful, although I found out recently that it is the recovery disc option to create under maintenance contract. I fdound the recdisk.exe file, but running it does nothing.
Mike
Maybe check this forum:
SQL Installation of Server & upgrade
http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/TaurArian [MVP] 2005-2010 - Update Services
-
Error code: 0x84BC089B, you try to run the service pack 1 for SQL Server
Original title: Error Code: 0x84BC089B
Received error code: 0x84BC089B tries to run the service pack 1 for SQL Server Express 2008R2.
Hello J lesow,
The question you have posted is related to SQL server and would be better suited on the TechNet support forum. I suggest you to post the question on the following link.
http://social.technet.Microsoft.com/forums/en-us/category/SQLServer
-
I have a laptop on vista home-use. When you look in the control panel - and then to uninstall, should there be several entries for SQL server, or one or none? Each entry seems to have a different digital denotation, but apparently I should have only one entry maximum.
The reason that I ask is that I have had problems in the software. I want to uninstall everything that is not supposed to be there.
Some lines of programs listed show information... some lines are completed.
When you click on a line that is complete, I am allowed the usuall to uninstall, options etc.
When you click on a line that is not complete, I'm not allowed the option uninstall.
The Compact Edition and the full SQL Server can be installed at the same time without any problems. I saw SQL Server2005 apparently installed by a manufacturer, perhaps to support some software they have grouped in. He could have an Acer.
I do not know what cause the problem with the uninstall option is not available. Information to fill in these fields are in the registry.
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall if you want to watch.
It could be the result of a broken uninstall or a bad registry cleaner. I'm not aware of anything that would fix this. You can try this http://support.microsoft.com/mats/Program_Install_and_Uninstall
but you may have to reinstall programs later.
You need two redistributable Visual C++ if you have programs that need it, which is likely. They had several updates that fits into the list programs. I have two for 2005 and six for 2008.
Maybe you are looking for
-
How to activate the em64t on Tecra R10-116 to use 6 GB RAM
Hello! I want to use 6 GB of ram on my laptop. In this case, I need activate the em64t functionality. I entered the BIOS configuration, but can not find the place where to allow him. Before I saw him... Hope someone will help me
-
Initialize the string of known length
I have searched the forums, but found nothing. I'm trying to convert a string to its equivalent representation in ASCII form. So I use the string depending on the byte array. But then I want to have a string with all these bytes concatenated sets. On
-
Not able to play the video with Windows Media Player camera .mov
Troubleshooting of Windows Media Player Im having trouble getting videos to play on windows media player. I download videos from my camera, and they always played on windows media player, but ever since I'm unpdated Quicktime Player which is bundled
-
Impossible to activate my Lightroom and Photoshop
Hi allI am extremely disappointed by the service from Adobe.Since Thursday, after the purchase in order to renew the license of the creative photography Plan cloud, I am unable to reactivate my Photoshop and Lightroom!During these FOUR DAYS, I had tr
-
Flash Player installed on Samsung GT N7000
I have old wife and deaf is my first BSL is a way more Visual than Word to understand.My 4 years mobile Flash Player have more come in last 2 years ago adobe stopped I don't know why? Done not right Adobe stop deaf need all Visual access all the vide