String hexadecimal "Hex Ascii" string!

I'm having a mental block and wonder if anyone can help!

I'm a device reading series and return a hexadecimal string. I need to view this hexadecimal string to the operator within a context area (PDA). The Message box will obviously contain normal text with the annex at the bottom HEX code.

When I run the code for the pop up box shows the message readable for the user, but the returned HEX string appears in the appropriatte of ascii characters (because the pop-up displays a normal string).

My question is, how to make a hexadecimal string appear in an indicator to display normal, 'same' string as it appears in its Hex display indicator:

0x0A1C - hex display should appear as 0A1C in the channel display indicator.

Thanks in advance

SSK

See photo.

Tags: NI Software

Similar Questions

  • hexadecimal to ascii convert function - I need null result for others

    Hello

    I have a coloumn which is vachar2 and it has numbers hexadecimal ascii codes together. I need to convert strings in ascii codes, but keep numbers.

    I can convert hex ascii as below

    Select utl_raw.cast_to_varchar2 (hextoraw ('4B414C414E42494C4749')) of double;

    Select utl_raw.cast_to_varchar2 (hextoraw (EXCHANGE_ID)) from myTable;

    results;

    --------

    Capture.JPG

    Result has many characters that are corrupted due to the number who have coloumn. I only need the significant values like "Kalanbilgi" or "Arayanibil".

    Your rules, but this always guessing a bit, you can get on the right track. I thought that...

    • If the passed value contains one of the letters A through F, it must be hex and must be converted to ASCII.
    • If it contains an odd number of digits, it cannot be a string of two-digit hexadecimal codes, so it must be a number.
    • If the converted ascii text contains characters but letters and numbers, it is not valid, so it takes a number
    • Otherwise, it is an ASCII string.

    With this set of rules (add or change the way you want) we can do this:

    WITH testdata (val) AS

    (SELECT "905071917837" FROM DUAL UNION ALL

    SELECT "905394609716" FROM THE DUAL UNION ALL

    SELECT "905558434737" FROM THE DUAL UNION ALL

    SELECT "90555843473" FROM THE DUAL UNION ALL

    SELECT '4B414C414E42494C4749' FROM DUAL UNION ALL

    SELECT '2444' DOUBLE UNION ALL

    SELECT '41726179616E6942696C' OF THE DOUBLE

    )

    -End of the test data-

    SELECT the val

    CASE

    WHEN val! = TRANSLATE(val,'9ABCDEF','9') THEN ascii_val - contains the letters, must be hexagonal

    WHEN LENGTH (val) / 2! = TRUNC ((val) LENGTH / 2) THEN val - an odd number of characters, must be a number

    WHEN TRANSLATE (UPPER (ascii_val),'* ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789 ',' *') only IS NOT NULL THEN val - ASCII contains illegal characters, should be in number

    Of OTHER ascii_val

    END val_out

    (SELECT TRIM (UPPER (val)) val,

    UTL_RAW. CAST_TO_VARCHAR2 (HEXTORAW (Val)) ascii_val

    OF testdata)

    Something like that should do the job (even if you have still some false positives), but the difficulty in the interest of your design, if you do not have to guess what the content of this average field in the future.

  • concatenate a string in hexadecimal with ASCII string

    Hello

    I'm new to LabView and I am building an application that talks to a camera. I'm stuck on something that seems simple enough: I need to concatenate a constant string of hexadecimal values (040D 0002...) with an ASCII hexadecimal string (00D0A10F, for example), which is emerging from a block 'number in string Hex. ' The output must be a string of hexadecimal values (040D 0002 00D0A10F) and go to the camera, but the block CONCATENATE transforms the ASCII string in hexadecimal display too, so that each character is converted to two hexagonal symbols...

    I found a very old post where someone claims that they have found a solution; Unfortunately, it is not displayed...

    Does anyone have an idea, how to do?

    Thank you very much!

    Michal

    Hello

    Give it a try - it converts an ASCII hexadecimal characters in ascii character string.

    So, if you view the output as hex, she must concatenate correctly with your other data.

    Dan

  • Decimal string to string Ascii (hex)

    Hello

    I want to convert a decimal string like this "12345" in the string (hex) Ascii as this "3132333435"

    How can I do?

    concerning

    Schwede

    It is a way to do it.

  • concatenate a hexadecimal string

    I'm trying to communicate through a circulation bath series, but it requires that all orders as a hexadecimal string.  I generate a portion of the string as a constant, but I need to convert a decimal point and add it at the end of the string.  I can convert the decimal to hexadecimal very well, but when I concatenate the strings is not hex ASCII format.  I tried a number of different tracks but am not having success.  Any help out there?

    Too bad.  I have it.  Just need to convert in I16 then catalogued for hex.

  • This string as boolean data.

    Hello!

    I get the UDP data READ the string FUNCTION and want to present only tracks (like 10011100-11001100...)

    the channel indicator allows me to see the CODES/HEX/ASCII data only.

    your help please.

    I guess you want these '-' delimiters, so here's a quick solution using 'table in spreadsheet string.

  • How to pass data to LabVIEW teststand Hex

    Hello

    Is it possible to pass data Hex Teststand to a LabView VI.

    In the column 'Type' of the Module tab on the stage, I only have the options "ASCII" or "binary string".

    What I need to change my VI to take the hex data, or can I change the Type of TestStand so that I can enter the Hex data

    When I enter the Hex data directly in the VI, it works fine.

    Thank you

    Sound advice from Omar! If you decide to follow this method, here's a useful KB...

    How to convert between hexadecimal and ASCII in LabVIEW

    http://digital.NI.com/public.nsf/allkb/894CF5FE064971BF8625758400014993?OpenDocument

  • e/s instrument parse %valeurs hexa% Assistant?

    My 'instrument' sends a string like this time per second:

    S:09 I: 002D V: 0 29 T:10 B 9
    S:09 I: 002D V: 0 29 T:10 B 9
    S:09 I: 002D V: 0 B 29 T:10 8
    S:09 I: 002D V: 0 29 T:10 B 9
    S:09 I: 002D V: 0 29 T:10 B 9
    S:09 I: 0031 V: 0 T:10 28 B 8
    S:09 I: 0031 V: 0 T:10 28 B 8
    S:09 I: 002D V: 0 B 29 T:10 8
    S:09 I: 0031 V: 0 T:10 28 B 8

    I want to analyze this in values by using wizard io instrument.

    Values are hex-ascii and I do not see an option to parse that.

    In addition, how to set the delimiters for the token 'tension' read from V: xxxx?

    A microcontroller to as my instrument, I can change how the data comes out if it's easier.  I chose this format because the raw output is readable on TeraTerm.

    Have you looked at Match Regular Expression

    Try

    S[0-9a - F] +)

    I[0-9a - F] +)

    V[0-9a - F] +)

    T[0-9a - F] +)

  • Problem: read bytes to serial port

    Hello, I need to communicate with an external device with serial port. I have to write a command to my device string, and then it should play with 64 bytes of data. I built a function of READING-WRITING and I use it in a loop (I have to read a lot of 64-byte block)

    Sometimes, I have the following problem:

    (1) I have send the command string, I wait with "Bytes to the serial port" whereas I have more then 60 bytes, then I read.

    (2) sometimes happen that the read function cannot read all 64 bytes, so the net for cycle, I have in the receiver buffer mor than 64 and the program to stop working. (does not work well)

    I need to be sure that after writing the command I have 64 bytes, so I red all the 64 bytes so the next loop for, I have the buffer of the empty receiver.

    I enclose my writing reading function. Please refer to the block diagram (there are a few notes).

    Thank you

    In no place in your program see the VISA configure the Serial Port. It's always a good idea to include this that even if you use the default settings. I suspect this is one of the default settings which is wrong with you. By default, playback is set to end when a character is considered. This means that if you have a 10 hex (ASCII LF) in your stream, playback stops until the specified number of bytes is read. Put in a VISA set up the Serial Port and connect a constant False to the stop character allow entry.

  • Equium M50: How do I change the details of Wlan WEP?

    Does anyone know how to change the WEP (?) details on an Equium M50, I just signed up to broadband wireless Orange and they tell me that their WEP key is 26 digits and look only some old pc for 23 codes numbers? I can't put my wireless switch on and my laptop is wireless box but will pair not to her.

    Any help would be greatly appreciated I have a centrino laptop, a wireless box, a monthly bill of £18 and I still have to use a thread!

    See you soon,.
    Nick.

    Hello

    Available in two flavors, 64-bit and 128-bit static WEP. When you configure a channel key on access point or client device a hex (or ASCII) WEP came to represent the key.
    If you use WEP 128 bit, the user has entered the portion is 26 digits HEX (ASCII 13 characters)
    Encryption WEP 64-bit required 5 password alphanumeric characters numbers and 10-digit hexadecimal characters.

    I put t know what WLan application you use but generally if you have Atheros WLan card you should be able to change the encryption in the Atheros WLan utility.

    If you use Windows to configure the WiFi connection so in this case you must change under properties of the Wlan network.

  • SSL VPN issues

    Hello

    We have had problems with the SSL VPN for quite awhile, but don't seem to be getting anywhere.

    This is an intermittent problem that we can not simply track down.

    Users can connect to the VPN, get an IP address and show as connected on GEORGE page.
    Users concerned, always shows a time of 0: logon. If they try to access anything whatsoever, they cannot, as looks that all traffic is blocked.
    I ran a trace of packets to an affected user, and it shows this. To me, it looks like a firewall policy blocks.

    (* Parcel number: 1 * header values: bytes captured: 74, real bytes on the wire: 74 Packet Info(Time:02/19/2016 18:01:42.256): in: X 1 * (interface), out:-, DROPPED, Code Drop: 582 Id of Module (package abandoned-denied by SSLVPN under user control strategy),: 27 (policy), (Ref.Id: _968_qpmjdzDifdl), 18:31) ether header Ethernet Type: IP (0 x 800), Src = [00:11:22:33:44:55], Dst = [c2 [:ea:e4:b1:8 b: 23] Type of IP header IP Packet: ICMP (0 x 1), Src = [192.118.201.6], [172.18.1.252] = Type ICMP ICMP Packet Header Dst = 8 (ECHO_REQUEST), ICMP Code = 0, 19407 value = ICMP checksum: [2] dump hexadecimal and ASCII of the package: c2eae4b1 8 b 230011 22334455 and 08004500 003c1a76 00008001 *... #... "3DU... E...<.v....* e8bfc076="" c906ac12="" 01fc0800="" 4bcf0001="" 018c6162="" 63646566="" *...v........k.....abcdef*="" 6768696a="" 6b6c6d6e="" 6f707172="" 73747576="" 77616263="" 64656667="" *ghijklmnopqrstuvwabcdefg*="" 6869="" *hi="">

    The only solution is to unplug / reconnect several times, until he started working. We cannot find a reason for this. Somedays it works very good and other days it is not.

    Any help would be greatly appreciated.

    Thank you

    Hello

    Just came across the same problem.

    We had some additional IP address ranges that had to go through the firewall on SSLVPN. I beilive source was the same.

    When configuring users > local users must also assign in selected authorized user access VPN (pencil icon on the right of the user name) Configure > VPN access.

    Once I created the Group of subnet for all subnets internal and permitted all Local defined users to access this group for VPN access settings, all traffic began to flow.

    I see that 1/2 of last year, but I just joined.

    Kind regards

    Rajko

  • ASCII to HEX Strings BIG string

    Hello guys,.

    I know that it is already a lot of posts on this issue, but I couldn't find exactly what I need and also could not manage to solve it myself...

    I need to convert a string with ASCII characters in a string that contains these characters in HEXADECIMAL representation.

    What I did:

    Apparently, it works very well, but only for a limited number of characters defined by the representation of the data of the constant 0 (U64). It allows me to convert that 8 ASCII characters, as you can see from the image below:

    So, it converted from 0 to 7, but not the other characters (8 and 9).

    Any ideas?

    Thanks in advance!

    What is the data type of the constant plugs into the cast.  My guess is that it is a U64.  So it will be cataloged only the first 8 bytes of your string to a number, then you do hex on these 8 numbers.

    Use the string to byte array.  Or you could also catalogued where an array of integers U8 is connected to the conversion function.

  • How to convert the Ascii string containing hex to hex string info?

    Dear all,

    I am busy doing a control/reading program for pumps of ISCO.

    Right now I'm in trouble with to send orders for PUMPS in HEXADECIMAL. When I use a CONTROL to the STRING in HEX display, everything works fine (when I manually write down the command in the control of the chain).

    Exist it a couple of pieces order: string Destination, length, ordering, Checksum. I'm doing a sup - screw that automatically calculates the checksum (modulo 256) and adds it to the string. Everything is going well: first of all, I shared the ascii bytes command and I calculate the checksum and add as ASCII HEXADECIMAL value to the chain of command. Also a CR (= 0d) is added. Now the whole string must be converted to hex. The string contains the right nummers HEX, but they are in ASCII format. Here was I feel worth it, I don't know how to do it!

    So to summarize:

    I have an ascii string that contains the values HEX (for example 315230303652454D4F544531420D) and it must be converted to a HEX string (for instance 3152 3030 3652 454 4531 420 4F54) for the pump of the ISCO can understand the command.

    The VI is attached.

    Thank you in advance,

    Bio

    Bio,.

    This should do what you want.

  • Converts a hexadecimal string to ASCII by VBAI

    Good day, experts, OR the

    I would like to ask for help on the stage of the VBAI calculator. Is there a way I could convert a hexadecimal string to ASCII character? For example 25 (Hex) to %(ASCII) or, if not in the calculator to other methods? I'll have to send data via TCP/IP later.

    Thank you very much
    Andrei K.

    Now I understand what you want. You can actually do from TCP step. First of all, you need get the length of the string in a digital as you did in step of the calculator, but then you can send this digital as a hexadecimal string of ascii to TCP step. To do this, have the length of the string as a numeric result in the return of calculator. In the TCP step, add a "Write" command and insert a result. Select the digital output of the step of the calculator and U8 of the data format. You can use the display/Hex Normal display to view the data that will be sent, and when displaying normal view, you can see that it is a '%' value when length is 37. See the attached screenshot to see how I did it.

    Hope this helps,

    Brad

  • Concatenation of Hex and bites of ASCII to get a HEX string

    Hello

    I'm trying to concatenate a MODBUS Application Protocol header with a function code and data that I send over TCP/IP to a motor controller.  I am running problems when I try to read my code function and data length.  I use "string length" to read the order data that I am seized, that convert a hexadecimal number, and then that the concatenation with some strings constant hexadecimal display and my function code and data which is also in the hexadecimal display. When I concatenate the lines, the end message is incorrect because (I think) the length of string, I have read and converted to hex in ASCII text?

    Does this sound as if that was the problem, and if this is the case, can someone help me to fix? If this isn't the problem can someone help me understand what is?

    Thank you

    Ran,

    Converting to hex it will show as ascii, it is what it is, a human readable number represented in hexadecimal. What if all you want to do is add the gross value, then convert this to tank and add it. For example, if you have more bytes data then 16 then you will add two additional bytes to the end instead of one.

    What if all you try to do is add a vale bytes that represents the amount of data you send simply converted in a single tank and add, as shown above. Of course, this means that the length of string cannot be greater then 256.

    Even if you have less then 16 bytes of data to the hexadecimal value added at the end is only 1 tank so unless the receiver is supposed to read a hexadecimal value, it will be always wrong. For example, 1 in hexadecimal read like 49 gross.

    Hope this helps,

    RGS,

    Lucither

Maybe you are looking for

  • communication problem with smart cameras

    HelloI am currently using VBAI 2010 with my smart camera and for the exchange of variables I use the function CNVCreateWriter to contact CVI 2010. It works fine when I'm in the configuration interface. I can use and modify all the variables with no p

  • Dual boot Linux and Windows on Acer Aspire E5 - 573G 10.

    Hello My laptop has 10 Windows installed, and I would also install Kubuntu dualboot. I already disable secure boot and quick start for Windows 10. The test with Kubuntu LIve on USB is ok, so I installed Kubuntu. Installation of Kubuntu ended well. Bu

  • Problems with Windows Movie Maker

    I'm not new to movie maker, but it's my first time met this problem and I don't know how to fix it. I downloaded youtube videos (which were .flv format) convert it to .wmv format and put them in movie maker. I did my video and published it. However,

  • OE upgrade and product key problem

    I want to upgrade vista to windows 7 on my HP laptop. However, when I enter my product key for vista, I receive a message that is not valid. The software is the original that was on the computer when you bought it. What should I do?

  • Blocker popup disabled but still get a message saying windows blocked popup

    Original title: popups blocker I disabled my popup blocker, but I always get a message saying blocked popup window. I've added the address of the page to the list of allowed sites, but same result