string not found in language resource files

I run my sequence and at the end of the test, I've got the popup next instead of failure message (see StringNotFound.jpg)

I checked my TestStand 2013\Components\Language\English folder and it seems that I have all the files (EngineString.ini...)

The PC I use has been installed with an installation program that I made. My Installer installs editor TestStand, Labview DURATION and module and my sequences with their libraries. I had a problem with my sequence, as a path of the module was bad after I installed it. So, in my Installer, I put the option "Include without transformation point or dependencies" only for its sequence. This solved my problem with the path, but perhaps it causes this not found chain problem?

Does anyone have an idea?

Concerning

Laurent

I stumbled upon this same question and ModelStrings.ini was not packed in my deployment (although all other files in... \English were.) To resolve this, you can either copy ModelStrings.ini directly to the location on your computer that is deployed or if you use the deployment utility select the... \English folder and its contents by having them in your workspace referenced.

Tags: NI Software

File not found: /home/forrest/workspace/Learning/Gallery.cfc

Resources:

Check the ColdFusion documentation to verify that you are using the correct syntax.

Search the Knowledge Base to find a solution to your problem.

Browser	Mozilla/5.0 (X 11; U; Linux x86_64; en-US; RV:1.9.2.10) Gecko
Remote address	0:0:0:0:0:0:0:1
Referrer
Date/time	October 11, 10 10:44

Stack trace

coldfusion.runtime.TemplateNotFoundException: File not found: /home/forrest/workspace/Learning/Gallery.cfc
     at coldfusion.filter.PathFilter.invoke(PathFilter.java:90)
     at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27)
     at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
     at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:28)
     at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
     at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
     at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
     at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
     at coldfusion.xml.rpc.CFCServlet.invoke(CFCServlet.java:138)
     at coldfusion.xml.rpc.CFCServlet.doGet(CFCServlet.java:264)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
     at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
     at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42)
     at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
     at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
     at jrun.servlet.FilterChain.service(FilterChain.java:101)
     at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
     at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
     at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
     at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
     at jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)
     at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
     at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
     at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
     at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

grog says:

@David thanks of Watts for the help that I tried to change the port to 8300 that does not work. That makes sense, I think because I have to go to 'http://Mypc:8500 / etc. in order to get to the CF administrator.

This means that content in the/opt/coldfusion9/wwwroot/directory will be served to the top by the url http://Mypc:8500 /.

I.e. /opt/coldfusion/wwwroot/myFirstColdFusion.cfm == http://mypc:8500 / myFirstColdFusion.cfm

Unless you did something to the underscore configeration to change this behavior.

Disk USB recording 4363 - 39L not found Toshiba in my files

Hello

on my 39L4363D, I have installed an extern USB-drive USB-record. When first connecting the drive was ok, I did two movies two days ago.

Today the connected player is not found in the 'my documents' cloud, I get the message "USB HDD is not connected... ». Otherwise this USB - stick is shown in the Mediaplayer with saved files "ts" and "CIPlus", but
I know that it is not possible to read these files in the Mediaplayer.

I disconnected the line and the power of your player and the TV, but the reader cannot be found repeatedly in 'my documents '.

Why the USB drive is shown in the mediaplayer and impossible to find in my USB-reviews?

Thanks for help
HAFTER

> The cause was that the digital antenna input has been interrupted
Thanks for your comments!

Age of Empire 3. error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the CAB file ' Disk3C ~ 1.cab '.

I recently bought Age of Empires 3 and tried to install it. I get to drive three - until almost the end - when I'm "error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the file ' Disk3C ~ 1.cab '. This may indicate a network error and the error reading CD-ROM, or a problem with this package. "The installation continues until the end of the progress bar, but it reads"Rolling Back Action"for about fifteen seconds before I got a"feature transfer error", which reads" error:-1603 Fatal error during installation. " Consult the help of Windows Installer (Msi.chm) or MSDN for more information. "Then, the Setup program stops and tells me that the game failed to install and my system has not changed. I cleaned the disk and it is in good condition. My computer also meets all the requirements for the game. I looked everywhere for an answer, but so far none has solved the problem. I tried to install it without the firewall and antivirus software running, in addition to install in safe mode. Any suggestions?

Hi void 1337,

Follow the suggestions below for a possible solution:

Method 1: I suggest that you put the computer to boot and then try to install the game and check to see if it helps:

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

Method 2: You can also follow the link and check if it solves the problem:

Error message when you install a Microsoft game or a mapping program

http://support.Microsoft.com/kb/258496

You can also view the article mentioned below to learn more:

Microsoft games: InstallShield Error Messages

http://support.Microsoft.com/kb/910816

If the above mentioned methods do not work, then post your request in the age of the forum of the empire for further assistance:

http://Forum.AgeCommunity.com/

Let us know if that helps.

Error "C:\Documents and settings\user\mydownlaods\ < download the file > is not found" after downloading a file.

Original title: download problems

After that I downloaded a file, it is deleted when I try to open it. I get an error that says C:\Documents and settings\user\mydownlaods\than the name of download, cannot be found.when I look in my download file, it shows the download as being deleted. Any ideas? FF

Welcome back, checks and please uncheck all responses as answered, this way among the other contributors will see the question and perhaps a few other ideas.

Thank you

EDIT:

other things that could cause this problem:

1.

IE open in "no Add-ons" mode To do than go to start > all programs > Accessories > system tools > "Internet Explorer (No Add-ons). If you can download the software now, it suggests then there's a bad addition affecting the browser.

2.

Sometimes the index.dat file may be damaged. In this case, you will need to delete the index.dat file and restart your computer. Then, you will be able to upload files properly again. Follow the steps below to delete this file.

(1) open Internet Explorer.

2) click on tools, click on Internet Options

(3) on the tab general, under temporary Internet files, click on delete files

4) click Ok when asked if you want to remove the files

(5) by the historical section under the general tab, click clear history, and then click Ok

(6) close Internet Explorer

(7) logout the current user and log on to another user as administrator account

(8) click on start, run

(9) type CMD and press ENTER to open a command prompt

(10) replace the directories in the Temporary Internet Files directory by typing the following command, substituting the word by the user username and the correct drive letter in Windows XP.

CD drive: \Documents and Settings\nom of utilisateur\Local Settings\Temporary Internet Files\Content.IE5

Example: cd c:\Documents and Settings\Mark\Local Settings\Temporary Internet Files\Content.IE5

(11) type del index.dat and press enter

(12) type Exit and press ENTER to close the command prompt

(13) restart your computer

Once the computer has been restarted, open a web page with a link to a download. Click on the link and try to download the file. It should work now.

Written by Mark Hasting

3. http://support.microsoft.com/kb/932823?ppud=4&wa=wsignin1.0

SERIOUS NOT FOUND ON THE DISK FILES

COMBUSTION PROCESS GETS INITIATED AND ENDS AT 100% AND THE DISC IS EJECTED. HIS BURNING PROCESS SUCCESSFUL SHOWS. BUT IMPOSSIBLE to FIND ALL the FILES ON THE CD AND the CD IS DAMAGED IE IMPOSSIBLE to USE IT AGAIN HIS EMPTY WATCH. Help, please. WIND 7 BASIC 64 BTS, SONY VAIO VPCEH25EN MCH. IT GIVES THE SAME RESULT IN WMP AND NERO

Hello

1 is the limited issue while burning a particular file?

2 have you made changes on the computer before this problem?

This problem may occur as a result of a software conflict, try the following methods and check if it helps.

Method 1:

I suggest you to uninstall Nero temporarily and check if it helps.

Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

Method 2:

You can also try to burn the DVD using Explorer Windows, then Windows Media Player and check.

Burn a CD or DVD in Windows Explorer: http://windows.microsoft.com/en-US/windows7/Burn-a-CD-or-DVD-in-Windows-Explorer

Burn a CD or DVD in Windows Media Player: http://windows.microsoft.com/en-in/windows7/burn-a-cd-or-dvd-in-windows-media-player

Method 3:

If the problem persists, I recommend you to uninstall and reinstall DVD drivers and check if that helps.

Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

Keep us updated on the status of the issue.

Windows 7 a vmdk file not found, cannot open the file '... Virtual Machines.localized/Windows 7.vmwarevm/Windows 7. VMDK

Could not open the file ".../Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmdk:
Help, please. I copied this over from a backup and it does not open. I joined the collection of support...
Thank you very much!
B

it2webber wrote: could not open the file ".../Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmdk:

Help, please. I copied this over from a backup and it does not open.

How the Virtual Machine has been backed up and restored? If Time Machine then...

It is a known fact that Time Machine is not 100% reliable backing up/restoring VMS in all circumstances/conditions. Also back up Virtual Machines via Time Machine of disk/time intensive and wastes a lot of space for something that may be corrupted and worthless time to restore it. At least I would exclude the Virtual Machines with virtual machines and Time Machine shutdown, not suspended and VMware Fusion closed and then manually copy the VMS to another location, preferably on a different physical hard drive. So keep the user data stored in the virtual machine saved out of the Virtual Machine on a regular basis in order to always have a backup of the current user data. If you need to restore a properly saved by VM is not as common at least you will have a virtual working Machine and data user to go forward with when you find out your Time Machine backup of the virtual machine fails. Also take a look at: best practices for backup of virtual machine (programs and data) in VMware Fusion (1013628)

That said, if you don't have a copy of the file "Windows 7 - f004.vmdk" and then to try to retrieve the data from the user, you can try the following:

Download then unzip it (double-click on) the joint "Windows_7 - f004.vmdk.zip" file that contains the file "Windows 7 - f004.vmdk ' an empty logical binary measure that has been created on the metric of the existing drive and add to the Package of the Virtual Machine. This should allow the VHD to be considered as a virtual hard drive, assuming that there is no damage to the extent of the binary left headers. Take a look on: work with Virtual Machine packages

At this point, that the VHD has the scope necessary to show as a full disk, assuming that it is not corrupt the header in other binary extensions and can now attempt to access for the recovery of user data.

There are several ways to try to retrieve user data. The easy, although not necessarily work properly according to what now lack us due to replace the missing binary extensions with a logical empty measure, is trying to start the VM normally. If the virtual machine starts up on the desk and VMware Tools load properly you should be able to copy your data to user off on a USB or slip and fall on the side of Mac or if you have a configured VMware folder then copy the files through it.

Other methods involve starting the Virtual Machine with a Live OS ISO Image and copy files from a USB key or temporarily assemble the VHD to another Virtual Machine work.

With the right tools installed the virtual hard disk could also be mounted as another accessible Volume through Finder.

Unable to access webmail after update to osx el capitan (404 - file or directory not found)

I can not access webmail after update to osx el capitan. I get the message "404 file or directory not found. The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable). What should do?

Contact your webmail provider and ask the url appropriate to their webmail page. Is which provider? What url you put in the address bar?

CompactRIO Deploy Error "LabVIEW: resource not found.»

Hello

I use a 9002 CompactRIO and LabVIEW 8.5. I made a simple FPGA VI to read a bunch of analog inputs and write a square wave to a few analog outputs. Then, I made an another VI to run on the target in real time in order to convert the frequency scaling and updated entries nationwide cycle duty cycle values and frequency real accountability. When I try to deploy the VI in real time, I get the following:

Deployment r03fsae (the goal settings successfully deployed)
Deployment of special audit Tags.vi (5.89 K)
Deployment GetRTHostConnectedProp.vi (3,41 K)
Deployment of search and replace Pattern.vi (8,11 K)
Deployment nirviFillInErrorInfo.vi (8.09 K)
Deployment niLvFpgaErrorClusterFromErrorCode.vi (11.27 K)
Deployment nirviErrorClusterFromErrorCode.vi (5.93 K)
Deployment error Code Database.vi (3.67 K)
Deployment to find Tag.vi (10.43 K)
Deployment of fusion Errors.vi (6.75 K)
Deployment Whitespace.vi topping (3.71 K)
Deployment nirio_MultilineStringToArray.vi (8,81 K)
Deployment nirio_AppVersionToI32.vi (3.96 K)
Error error Code.vi (23.42 K) Cluster deployment
Deployment _nirio_device_attrSetString.vi (9.46 K)
Deployment _nirio_device_close.vi (9.90 K)
Deployment nirio_Read32.vi (13,07 K)
Deployment _nirio_device_open.vi (11.59 K)
Deployment nirio_Write32.vi (13,01 K)
Deployment _nirio_device_writeBlock8.vi (9.83 K)
Deployment nirio_Write8.vi (13,01 K)
Deployment _nirio_device_configSet.vi (11.42 K)
Deployment nirio_DMAReconfigureDriver.vi (16.63 K)
Deployment _nirio_device_writeBlock32.vi (9.36 K)
Deployment nirio_Read8.vi (13.04 K)
Deployment nirio_DMAStopAll.vi (11,39 K)
Deployment _nirio_device_attrGetString.vi (13.06 K)
NirviReportUnexpectedCaseInternalError (String) (5.58 K) .vi deployment
Deployment of .vi nirviReportUnexpectedCaseInternalError (U32) (4.72 (K)
Deployment _nirio_device_readBlock32.vi (14.41 K)
Deployment _nirio_device_attrGet32.vi (13.85 K)
Deployment nirio_IsItOKToDownload.vi (7.07 K)
Deployment nirio_MiteNTDeviceFamily.vi (5.30 K)
Deployment of Format Message String.vi (7.35 K)
Deployment CORE.vi General Error Handler (51,02 K)
General Error Handler.vi (13.19 K) deployment
Simple deployment Error Handler.vi (10.01 K)
Deployment nirio_CheckDriverVersion.vi (10,58 K)
Deployment _nirio_device_attrSet32.vi (13,62 K)
Deployment nirio_Download.vi (29,31 K)
Deployment nirio_ConfigureRegisterAddresses.vi (7.11 K)
Deployment nirio_CleanUpAfterDownload.vi (6.22 K)
Deployment nirio_PrepareForDownload.vi (6.44 K)
Deployment nirio_EnableInterrupts.vi (13.76 K)
Deployment nirviRIOSetUpMiniMite.vi (31.23 K)
Deployment nirio_Open.vi (14.93 K)
Deployment nirio_Close.vi (10.95 K)
Deployment nirio_DisableInterrupts.vi (11,10 K)
Deployment of nirviIntfOpen_cRIO - 9102.vi (85,54 K)
Deployment of nirviIntfClose_cRIO - 9102.vi (12.24 K)
Deployment of scale freq and duty.vi (4.46 K)
Deployment XDNodeRunTimeDep.lvlib
Deployment XDNodeRunTimeDep.lvlib:loadlvalarms.vi (5.47 K)
Math.vi sensor deployment
Could not download the math.vi sensor
LabVIEW: Resource not found.
LabVIEW: Resource not found.
LabVIEW: Resource not found.
LabVIEW: Resource not found.

Download completed with errors.

This error message is not particularly useful, someone knows what could be my problem? Or how I can fix it yet? Is there a detailed journal where I can look for more information about the error?

Thanks in advance for any help!

Hi David,

You may be walking on ground dangerous with your fpga code, old and new. You use the modules in what is known as 'calibrated' calibration mode that is of fixed point math. Your generation of square wave fpga using whole math, which is normally used when the modules operate in mode calibration "gross". To change the calibration mode, you will need to right click on the module, then select it desired mode to use. I'm not saying that you do.

What you need TO do to ensure the proper functioning of your fpga VI is to make sure that you use U32 son of math required and then convert the U32 an FXP using the correct encoding (if it is signed, word length and integer). In your case the 9263 requires signed word in length, 20-bit, 5-bit all over. Insert an FXP conversion between the generation of square wave and either create a constant FXP of the appropriate type (or use a control correctly put in place of one of the other 9263 channels [AO0 AO1]) and connect to the node of type of fixed point on the conversion OR define the conversion of fixed point with a right click on the exit node and the appropriate settings in the popup box.

As for your new code fpga, I don't know why you used a sequence structure that your reading of 18 channels on the 9205 will have 144 microseconds, and each write two channels on the 9263 will take 5 microseconds. I've not worked on how long will take the square wave generation.

I do not understand your last question.

> "I've attached a screenshot of my pwm_out.vi if I remove control of read/write of background, or if I don't use of all none of the analog inputs, it works fine.

> But as soon as I add the analog inputs it fails... ».

Did you create a new stream of your fpga_new.vi and referenced in your pwm_out_new.vi on the RT?

It is difficult to guess what you are showing in the screenshots. If the project is not too big then maybe you could post here.

As mentioned above, by JMoto, software versions help. Check in MAX you have on your PC and also on the cRIO 9002 to make sure that there is no incompatibility.

See you soon

Stephen

string not found in language resource files

Similar Questions

File not found: /home/forrest/workspace/Learning/Gallery.cfc

Maybe you are looking for