string not found in the resources of the library

I use the example of Simple operator Interface OR front end to my test sequences. Everything works fine on a development PC, but when I create an installer using TestStand2010 and put the software on a desktop deployment, the software works, but in the pop standard OR for "UUT enter serial number" and the pop-up completed test result, all normal text is replaced by "string not found in library resource.

I have enough course that I must be missing some files in config or dll OR standard in my build Teststand script. Anyone know what files it Miss?

Thank you

Ian

Advertisement

Ian,

you missed to deploy the language on the target files. The dialog box is configured to read the appropriate string from the file 'ModelStrings.ini' to allow the translatation to the user interface. Please make sure that the target system has all the available language files (default is English only, but you can create your own translated labels included)

hope this helps,

Norbert

Tags: NI Software

Similar Questions

  • the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

    What is apsGetReady?     Do I need?   If yes how can I do?  If this is not the case, how can I remove the window error message.

    """""""""""""""""""""""""""""""""""""""""""'''

    Wzcsldr2.exe found entry point

    the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

    """"""""""""""""""""""""""""""""""""""""""""""""

    Hello

    1. When you receive this error message?
    2. you did it before the issue of any material changes or software?
    3. what service pack and antivirus are installed on your system?
    4. What is the brand and model of the router you are using to connect to the Internet/network

    5 are you facing problems to connect to the Internet or to the network?

    6. are you using any third-party wireless / network in the System Manager software?

    Method 1:

    Step 1: Boot your system in 'Safe Mode with networking' and check if you get the same error message. Then review the article mentioned below to do so:
    A description of the start in Windows XP Mode options:
    http://support.Microsoft.com/kb/315222

    Step 2: If you receive any error in safe mode, please boot your system to the boot and see if the problem still occurs in this mode. Try now to the KB article to perform the clean boot:
    http://support.Microsoft.com/kb/310353
    Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

    Method 2: Please see Using D-Link, if you use D link router.
    http://www.Dlink.com/support/default.aspx

  • "... SHRegGetValueW not found in the library of dynamic links SHLWAPI.dll. »

    Message error "the procedure entry point SHRegGetValueW be found in the library of dynamic links SHLWAPI.dll". I get this error message after downloading it and pre-installation of IE 8.  Compared SHLWAPI found on HD with SHLWAPI on OS installation disc after doing a SFC/scannow and found them manually in the difference.  Copied the body of SHLWAPI on disk and subed in the file on hard disk.

    Using IE 6 I am unable to update to SP3 after finally succeed to install SP1a by using Micro... Update.  The analysis concludes several minor updates and it fails to install those... repeatedly!  This is done after / because of a clean installation where Win2000Pro was the previous operating system.

    It is said "the mind goes first" and this is perhaps what is wrong, because I installed clean OS on dozens of comps with no problem al all.  H E LLLL PPP!   All thoughts will be performed and considered a fix... until it doesn't

    Positive thinking... T to all for your help and your review!

    909090... J

    Message error "the procedure entry point SHRegGetValueW be found in the library of dynamic links SHLWAPI.dll". I get this error message after downloading it and pre-installation of IE 8.  Compared SHLWAPI found on HD with SHLWAPI on OS installation disc after doing a SFC/scannow and found them manually in the difference.  Copied the body of SHLWAPI on disk and subed in the file on hard disk.

    Using IE 6 I am unable to update to SP3 after finally succeed to install SP1a by using Micro... Update.  The analysis concludes several minor updates and it fails to install those... repeatedly!  This is done after / because of a clean installation where Win2000Pro was the previous operating system.

    It is said "the mind goes first" and this is perhaps what is wrong, because I installed clean OS on dozens of comps with no problem al all.  H E LLLL PPP!   All thoughts will be performed and considered a fix... until it doesn't

    Positive thinking... T to all for your help and your review!

    909090... J

    First of all, you can not install SP3, except if you have SP2 installed successfully. Since you have SP1a, you need install SP2, then try to install the SP3 and IE8.

    In addition, this can happen if your SP service pack is damaged/corrupted.

    You receive an "Explorer.EXE - Entry Point not found - the procedure entry point SHCreateThreadRef is not found in the library of dynamic links Shlwapi.dll" error message after you install the MS04-038 security update
    http://support.Microsoft.com/kb/888162

    Installation of Windows Internet Explorer 8 on a Windows XP-based or a Windows Server 2003 computer returns error: "SHRegGetValueW procedure entry point is not found in the library DLL SHLWAPI.dll."
    http://support.Microsoft.com/kb/972264

    NASS - http://www.nasstec.co.uk

  • the procedure entry point is not found in the library of dynamic links SHLWAPI.dll / unregistered class?

     I found a question similar to this but need more specific assistance. As I turned on my computer, a window pops up saying "the entry point of procedure not found in the library of dynamic links SHLWAPI.dll." This message has not left since and my computer let me just open google chrome. I have not tried to install anything lately. I tried what was suggested on a similar response - the sfc / scannow command-, but when I tried, it said I had to be an administrator. This confuses me because there is only a single user account on this computer so I assumed it was the administrator. When I tried to open the control panel to check, my computer would not leave a message with a lot of random numbers and letters and 'class not registered' jumped upward and me. I'm really confused and need help!

    Hello Elle1234,

    Looks like DLL file or the missing link between the Dynamic link Library & the missing registry entry. To replace the Dll files missing please go ahead and run the scan by following the simple steps below using the System File Checker tool and check if it does the trick.

    To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator.  If you are prompted for an administrator password or a confirmation, type the password, or click allow.
    2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

    Hope this review helps you. Let us know anyway. Make it a great day!

    "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • The procedure entry point UXCore.dll! 0CDUIDialog@@QAE@XZ is not found in the library of dynamic links UXCore.dll

    The procedure entry point UXCore.dll! [email protected]@[email protected] is not found in the library of dynamic links UXCore.dll...  What can I do to resolve this problem in Windows Live Mail?

    See if trhis is useful:

    https://windowslivehelp.com/thread.aspx?PostID=1549d01b-5419-41f8-ACCB-31b7e0e36383#1549d01b-5419-41f8-ACCB-31b7e0e36383

    Tom Ferguson

  • Startup error: wlstartup.exe the proecedure entry point is not found in the library of dynamic links UXCore.dll

    Original title:wlstartup.exe

    What follows is popping up on our computer when to start-"the proecedure entry point? [email protected]@@QBEHXZ not found in the library of dynamic links UXCore.dll"- what's going on and how clean us this up - thank you

    Hi chattums,

    (1) since when are you facing this problem?

    (2) remember to make changes to the computer before this problem?

    Method 1: Issue of wlstartup.exe could be caused by an installation Windows Live damaged or broken; You can see the steps by Joe Cap and Halima S, in the link below that relates to a similar question.
    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/55aa850a-e2d3-4816-820F-5caf0a766b44

    Method 2: Put the computer to boot and then check if the problem persists

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Continue with the remaining steps to pin-point on the third party service.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    Thanks and greetings
    Ajay K
    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error message: "the entry Point of procedure aspSearchInterfuce not found in the library of links dynamic wlanapi.dll" after SP 3 and IE 8 displays.

    Original title: Windows XP Home error message

    I reformatted the hard drive and restorded factory settings. I've upgraded to Service Pack 3 and IE 8. I now receive the errors listed below and the computer does not turn off. I have to hold in the power button to make it stop.

    Errors:

    The procedure entry Point aspSearchInterfuce could not

    Be found in the library of links dynamic wlanapi.dll

    The apsInitialze procedure entry Point could not be

    located in the library of links dynamic wlanapi.dll

    can someone please tell me what are these errors and how to fix?

    Hi Daytona931,

    Hope you were able to resolve the issue and thank you for sharing the information.

  • Wzcsldr2.exe - Entry Point not found the procedure entry point apsGetReady cound not found in the library wlanapi.dll dynamics. apears after startup

    ---------------------------
    Wzcsldr2.exe - Entry Point not found
    ---------------------------
    The procedure entry point apsGetReady could not be found in the library of links dynamic wlanapi.dll.
    ---------------------------
    Ok
    ---------------------------

    Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

    Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

    Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

    Provide information on your system, the better you can:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The afflicted system has a working CD/DVD (internal or external) drive?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    Do you see that you think not you should see and when you see it?

    If the system works, what do you think might have changed since the last time it did not work properly?

    Googling a bit (very little) reveals that the file wzcsldr2.exe or wzcsldr3.exe belongs to a kind of device from D-link wireless connected to your system.

    Fact that sound familiar and you have something like this installed?

    If Yes, then I would get the page Support D-Link and find the latest driver for any device you use and install it.  You may need to first uninstall your device running - I'm sure they must have instructions and tips for the procedure.

    They also have an active Support Forum where you can post your problem/question to see if people there can help you get there.  There is already some discussion in the forums about the problems you describe, but since we know absolutely nothing about your system, you should probably take it yourself.

    I found a few other ideas through Googling, but I don't like some of the ideas I've read and if you stuff worked before, what do you think has changed since the last time it worked correctly?  Did you update or reinstall your device from D-Link or drivers, lately?

  • ArcCon_GetConnectVersion is not found in the library of dynamic links ArcCon.dll

    Actual title: ArcCon .ac-Entry Point not found error

    Hello, I get the error "The ArcCon_GetConnectVersion be found in the library of dynamic links ArcCon.dll" every time that I reboot my laptop.  I tried to uninstall my ESPON scanner software and reinstall. It eliminates the error when the computer is turned on but whenever I restart the system, I get the same message as previously wrote... Please help me to remove this every mistake of banner of 5 sec.

    Thank you

    Frank M

    Hello

    -Did you do changes on the computer before this problem?
     
    I suggest to maintain the computer in clean boot mode and check if the problem persists.
    A clean boot to check if startup item or services to third-party application is causing this issue.
    You can read the following article to configure the computer to boot:
    http://support.Microsoft.com/kb/929135
    Note: After the troubleshooting steps, see step 7 in binding boot is a way of putting your computer to normal startup mode.
     
    Hope this information helps.
  • string not found in language resource files

    I run my sequence and at the end of the test, I've got the popup next instead of failure message (see StringNotFound.jpg)

    I checked my TestStand 2013\Components\Language\English folder and it seems that I have all the files (EngineString.ini...)

    The PC I use has been installed with an installation program that I made. My Installer installs editor TestStand, Labview DURATION and module and my sequences with their libraries. I had a problem with my sequence, as a path of the module was bad after I installed it. So, in my Installer, I put the option "Include without transformation point or dependencies" only for its sequence. This solved my problem with the path, but perhaps it causes this not found chain problem?

    Does anyone have an idea?

    Concerning

    Laurent

    I stumbled upon this same question and ModelStrings.ini was not packed in my deployment (although all other files in... \English were.)  To resolve this, you can either copy ModelStrings.ini directly to the location on your computer that is deployed or if you use the deployment utility select the... \English folder and its contents by having them in your workspace referenced.

  • Error message "5377 xlive.dll" not found in the library link when trying to play F1 2011

    Original title: f1 2011 5377 xlive.dll error

    Hello
    When I opened f1 2011 the game it gives message not found 5377 xlive.dll in the liberary link.
    and I try a lot of things
    1. install games for windows marketplace and to update
    2 - Download the xlive.dll file and located in System 32 and the game folder
    3. use the command prompt start menu

    so I tried my best and I need your advice...
    Thank you

    Hello

    1. what operating system is installed on the computer?
    2. were there any changes (hardware or software) to the computer before the show?

    Put the computer to boot and see if it helps.
    To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Note: follow step 7 to reset the computer to start as usual after the boot process.
    http://support.Microsoft.com/kb/929135

    Note: follow step 4 to reset the computer to start as usual after the boot process.
    http://support.Microsoft.com/kb/310353

    Hope this information helps.

  • the entry point producer d3dperf_setmarker is not found in the library d3d9.dll dynamics.

    All my games do not work

    When I double click on fifa 09, he said that the producer entry point not found d3dperf_setmarker in the library d3d9.dll dynamics.

    can someone tell me how to solve this problem

    Hello

    Please check if you are able to play this game in a spare user account

    -Cleanboot Windows to isolate 3rd party interference

    -Check if there is an update/patch for the game

    -System Restore to a date and time when the game worked successfully

    -Open the control panel and try to repair the application

    Uninstall/reinstall the game

    I hope that this information is beneficial.

    Thank you

    Aaron
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Some games gives the error: 'the point procedure entry CtfImmGetTMAEFlags's not found in the library of dynamic links IMM32.dll

    'The procedure entry point not found CtfImmGetTMAEFlags in IMM32.dll dynamic link library.'

    It happens when I'm going to play some games (example: League of legends when a game starts and it comes out of the login screen) and close programs, I can not update windows or recover from a certain date they will fail each time.

    Hello

    Follow the steps in the below link and then try to install the games and check if the problem still persists.

    Method 1: clean boot Mode

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    http://support.Microsoft.com/kb/929135

    Note: After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

    Method 2: You can try to contact the manufacturer of the game for better assistance, because it is specific to the game.

    Hope this information helps.

  • entry point not found in the library of syncnotifier.exe dynamic links, help please

    Unable to connect to ITunes, reads the message: ApplesyncNotifier.exe - point of entry not found?

    Hello

    AppleSyncNotifier.exe is part of ITunes, I would suggest you download and reinstall iTunes from here http://www.apple.com/itunes/download/

    It might help to solve your problem

    See also:

    http://support.Apple.com/kb/ts1368

    You can also get in touch with support for ITunes.

    Reference:

    Welcome to iTunes Support

    http://www.Apple.com/support/iTunes/

  • Call a dll for Labview: function not found in the library

    Hello

    I try to call a form very simple .dll Labview. I have compiled .dll file for x 64 by using Visual Studio 2010, because I'm using Labview(64-bit). I did everything exactly as I have read in several tutorials. But the "call library function node" does not create a menu with functions avalible as it is supposed to do. The Import Wizard found no function either. What is the problem with my .dll?

    I added a block marked 'extern "C" ' file in my source, but it still doesn't work.

    Thank you

    Matthias

    You have not read the article properly. Read step 3. In the .cpp file, you add '__declspec(dllexport)' to the body of the function. In the header file, you add extern 'C' at the beginning of the prototype. It comes to dealing with the name decoration than the C++ compilers.

Maybe you are looking for

  • Is iphone 4 compatible with the latest itunes app?

    My iphone 4 have still the old itunes icon purple and not the white and blue later. My phone says it is aware of the software updates, but I'm not sure if it is. What is the latest software operating system for iphone 4 and it is compatible with the

  • Z570 missing key

    A month and a half ago, I bought a laptop Z570. After gently using it for a month, the "J" key fell. I really have no idea why fell the key was not to be tough with my computer Lenovo will pay to get a new key? I need to contact support?

  • can 't log MSN Service. Why and how?

    When I took out my Hotmail, I got a message that I have not been disconnected from MSN Messenger Service. Help, please. Thank you

  • Unable to boot - boot loop

    original title: impossible to go to the login page. __ I recently did a computer cleanup, and I think that I changed the configuration settings or deleted an important file. Now, whenever I start my computer, it behaves normally until when you see th

  • How can I get the Windows 7 Media Center guide to update the channel list.

    I noticed that lists of TV channels in Windows 7 Media Center guide are incomplete.  Not all available channels are appearing.  They disappeared for some time.  I checked the lists online of zapsit and they contain the missing strings.  The program z